FLT CONNECTOR 0.5mm Emboss Tape Connectors for FPC (.020") pitch Features ------------------------ * Heat resistant design suitable for surface mounting The housing is made of heat resistant plastic to allow reflow soldering. * Staggered surface mount tails The lead pitch is thus 1.0mm (.039"), which enables connector mounting operation easier. * Embossed tape for automatic mounting The FLT connector is packaged in embossed tape for automatic mounting. The plastic reel can be used repeatedly, good for eco-system. * FPC insertion is easy Staggered and unique contact point layout can reduce the FPC insertion force, yet with secure retention force. * Compact design This connector measures only 4.15mm (.163") high after mounting, with a reduced surface mounting area, as solder tabs are not necessary because of the staggered solder tail construction. Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/50m max. After environmental testing/20m max. (Variance from the initial) * Insulation resistance: 500M min. * Withstanding voltage: 200V AC/minute * Applicable FPC: Lead pitch/0.5mm (.020") Lead width/0.35mm (.014") Mating part thickness/ 0.30 0.05mm (.012".002") <Note>FPC to be actually used should be checked for applicability. * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 528 FLT CONNECTOR Connector --------------------------------------------------------------- A B Circuit No.1 0.5(.020) 1.0(.039) C 0.15(.006) 4.0(.157) 2.95(.116) 3.4(.134) Dimensions mm(in.) Q'ty / reel Circuits Model No. 6 06FLT-SM1-TB 4.9(.193) 3.5(.138) 2.5(.098) 2,500 8 08FLT-SM1-TB 5.9(.232) 4.5(.177) 3.5(.138) 2,500 10 10FLT-SM1-TB 6.9(.272) 5.5(.217) 4.5(.177) 2,500 12 12FLT-SM1-TB 7.9(.311) 6.5(.256) 5.5(.217) 2,500 14 14FLT-SM1-TB 8.9(.350) 7.5(.295) 6.5(.256) 2,500 16 16FLT-SM1-TB 9.9(.390) 8.5(.335) 7.5(.295) 2,500 18 18FLT-SM1-TB 10.9(.429) 9.5(.374) 8.5(.335) 2,500 20 20FLT-SM1-TB 11.9(.469) 10.5(.413) 9.5(.374) 2,500 22 22FLT-SM1-TB 12.9(.508) 11.5(.453) 10.5(.413) 2,500 24 24FLT-SM1-TB 13.9(.547) 12.5(.492) 11.5(.453) 2,500 26 26FLT-SM1-TB 14.9(.587) 13.5(.531) 12.5(.492) 2,500 28 28FLT-SM1-TB 15.9(.626) 14.5(.571) 13.5(.531) 2,500 30 30FLT-SM1-TB 16.9(.665) 15.5(.610) 14.5(.571) 2,500 32 32FLT-SM1-TB 17.9(.705) 16.5(.650) 15.5(.610) 2,500 40 40FLT-SM1-TB 21.9(.862) 20.5(.807) 19.5(.768) 2,500 A B C Material and Finish Contact: Phosphor bronze, copper-undercoated, tin/lead-plated Housing: Nylon 46, UL94V-0 Note: 1. The products listed above are supplied on embossed-tape. 2. 32FLT-SM1-TB and 40FLT-SM1-TB are not CSA approved. Taping specifications ------------------------------------------------------ Feeding direction [13(.512)dia.] +.098 W1+2.5 -1.0 ( -.039 ) 1.550.05 4.00.1 1.10.1 (.061.002)dia. (.157.004) (.043.004) 1.750.1 (.069.004) Feeding direction Cover tape Carrier tape 11.50.1 (.453.004) 24.00.3(.945.012) 3802.0(14.961.079)dia. (12 to 30 circuits) W1***25.5mm (1.004") 2.00.5(.079.020) 8.00.1 (.315.004) Carrier tape Cover tape leader Feeding direction (32 to 40 circuits) W1***33.5mm (1.319") Feeding direction 1.550.05 4.00.1 1.10.1 (.061.002)dia. (.157.004) (.043.004) 1.750.1 (.069.004) The end part 160(6.299)min. Connector mounting part Leader part 100(3.937)min. 400(15.748)min. Cover tape Carrier tape (6 to 10 circuits) W1***17.5mm (.689") 14.20.1 (.559.004) 28.40.1(1.118.004) 32.00.3(1.260.012) Cover tape Carrier tape 16.00.3 (.630.012) 7.50.1 (.295.004) 1.550.05 4.00.1 1.10.1 (.061.002)dia. (.157.004) (.043.004) 1.750.1 (.069.004) Feeding direction 8.00.1 (.315.004) Note: 1. Specifications conform to JIS C 0806. The tape width, connector recess hole dimensions, etc.are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice. 8.00.1 (.315.004) 529 FLT CONNECTOR Lead section dimensions of FPC -------------------------------------------- [0.5(.020)X(Nomber of circuits+1)]0.05(.002) 0.50.1(.020.004) [0.5(.020)X(Nomber of circuits-1)]0.03(.001) 0.50.03 0.350.04 (.020.001) (.014.002) 0.30.05 (.012.002) [5.5(.217)] 3.0(.118)min. Reinforcing layer PC board layout (viewed from component side) and Assembly layout ------------------ 1.6(.063) 1.6(.063) 4.0(.157) 0.50.05(.020.002) 0.5(.020) Note: 1.Tolerances are non-cumulative: 0.05mm( .002") for all centers. 2.The dimensions above should serve as a guide line. Contact JST for details. 530 2.95(.116) 4.15(.163) 1.00.05 (.039.002) Circuit No.1