Class X2 Metallized Impregnated Paper EMI Suppression Capacitors PME271M, Class X2, 275 VAC Overview Applications The PME271M is constructed of multilayer metallized paper encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94 V-0. Typical applications include worldwide use in electromagnetic interference suppression in all X2 and across-the-line applications. Benefits * * * * * * * * * * Approvals: ENEC, UL, cUL Rated voltage: 275 VAC 50/60 Hz Capacitance range: 0.001 - 0.6 F Lead spacing: 10.2 - 25.4 mm Capacitance tolerance: M = 20% (for C 0.1 F), K = 10% (for C > 0.1 F) Climatic category: 40/110/56, IEC 60068-1 Tape and reel in accordance with IEC 60286-2 RoHS Compliant and lead-free terminations Operating temperature range of -40C to +110C 100% screening factory test at 2,150 VDC Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Customer Part Number PME271 M (B) 610(0) M R30 Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Capacitance Tolerance Packaging X2, Metallized Paper M = 275 Blank = Standard A = 10.2 B = 15.2 D = 22.5 The last three digits represent significant figures. The first digit specifies the total number of digits. M = 20% (for C 0.1 F) K = 10% (for C > 0.1 F) See Ordering Options Table KEMET Internal Part Number P 276 Q E 104 M 275 A Capacitor Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VAC) Packaging P = Paper X2, Metallized Paper First two digits represent significant figures. Third digit specifies number of zeros. M = 20% (for C 0.1 F) K = 10% (for C > 0.1 F) 275 = 275 H = 10.2 Q = 15.2 C = 20.3 S = 22.5 E = 25.4 See Dimension Table See Ordering Options Table One world. One KEMET (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 1 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Benefits cont. * The highest possible safety regarding active and passive * High dV/dt capability flammability * The impregnated paper ensures excellent stability and * Excellent self-healing properties ensure long life even when outstanding reliability properties, especially in applications subjected to frequent over voltages with continuous operation * Good resistance to ionization due to impregnated dielectric Ordering Options Table Lead Spacing Nominal (mm) 10.2 Type of Leads and Packaging Standard Lead and Packaging Options Bulk (Bag) - Short Leads Bulk (Bag) - Maximum Length Leads Lead Length (mm) KEMET Legacy Lead and Lead and Packaging Packaging Code Code 6 +0/-1 30 +5/-0 C A R06 R30 H0= 18.5 0.5 L R19T0 Tape & Reel (Standard Reel) H0= 18.5 0.5 P R19T1 Ammo Pack H0= 16.5 0.5 LAF3 R30XA 6 +0/-1 30 +5/-0 C A R06 R30 H0= 18.5 0.5 L R19T0 H0= 18.5 0.5 P R19T1 6 +0/-1 30 +5/-0 C A R06 R30 H0= 18.5 0.5 L R19T0 Tape & Reel (Large Reel) H0= 18.5 0.5 P R19T1 Standard Lead and Packaging Options Bulk (Bag) - Short Leads Bulk (Bag) - Maximum Length Leads Tape & Reel (Standard Reel) 6 +0/-1 30 +5/-0 H0= 18.5 0.5 C A L R06 R30 R19T0 H0= 18.5 0.5 P R19T1 6 +0/-1 30 +5/-0 C A R06 R30 Tape & Reel (Standard Reel) Other Lead and Packaging Options Native 10.2 formed to 7.5 15.2 Standard Lead and Packaging Options Bulk (Bag) - Short Leads Bulk (Bag) - Maximum Length Leads Tape & Reel (Standard Reel) Other Lead and Packaging Options Tape & Reel (Standard Reel) 20.3 Standard Lead and Packaging Options Bulk (Tray) - Short Leads Bulk (Bag) - Maximum Length Leads Tape & Reel (Standard Reel) Other Lead and Packaging Options 22.5 Other Lead and Packaging Options Tape & Reel (Large Reel) 25.4 Standard Lead and Packaging Options Bulk (Tray) - Short Leads Bulk (Bag) - Maximum Length Leads (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 2 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Dimensions - Millimeters FRONT VIEW SIDE VIEW L B H d LL p Size Code HE HH HL QE QL QP QS CE CJ CP SJ SP SU EG EJ EL p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.2 10.2 10.2 15.2 15.2 15.2 15.2 20.3 20.3 20.3 22.5 22.5 22.5 25.4 25.4 25.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 3.9 4.1 5.1 5.2 6.0 7.8 8.5 7.6 9.0 11.3 8.0 10.0 12.0 10.5 12.1 15.3 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 7.5 8.2 10.5 10.5 12.5 13.5 14.3 14.0 15.0 16.5 17.0 19.0 22.0 17.3 19.0 22.0 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 13.5 13.5 13.5 18.5 18.5 18.5 18.5 24.0 24.0 24.0 27.0 27.0 27.0 30.5 30.5 30.5 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 Note: See Ordering Options Table for lead length (LL) options. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 3 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Temperature Range Climatic Category Approvals Dissipation Factor Test Voltage Between Terminals 275 VAC 50/60 Hz 0.001 - 0.6 F 20%, 10%, 5% on request -40C to +110C 40/110/56 ENEC, UL, cUL Maximum Values at +23C 1 kHz 1.3% The 100% screening factory test is carried out at 2,150 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures. Minimum Values Between Terminals Insulation Resistance In DC Applications C 0.33 F 12,000 M C > 0.33 F 4,000 M * F Recommended voltage 630 VDC Environmental Test Data Test IEC Publication Procedure Endurance EN/IEC 60384-14 Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hours each 10 - 55 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068-2-29 Test Eb 1,000 bumps at 390 m/s2 Change of Temperature IEC 60068-2-14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384-14 VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds) Passive Flammability IEC 60384-14 IEC 60384-1, IEC 60695-11-5 Needle-flame test Damp Heat Steady State IEC 60068-2-78 Test Cab 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature +40C and 93% RH, 56 days (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 4 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Approvals Mark Specification File Number EN/IEC 60384-14 SE/0140-16D UL 60384-14 CAN/CSA-E60384-14-09 E73869 Environmental Compliance All KEMET EMI capacitors are RoHS Compliant and halogen-free. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 5 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Table 1 - Ratings & Part Number Reference Maximum Dimensions in mm B H L Lead Spacing (p) 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.1 0.1 0.15 0.22 0.1 0.15 0.22 0.27 0.33 0.27 0.33 0.47 0.6 3.9 3.9 3.9 4.1 5.1 5.1 5.2 5.2 5.2 6 6 6 7.8 8.5 7.6 9 11.3 8 8 10 12 12 10.5 12.1 15.3 15.3 7.5 7.5 7.5 8.2 10.5 10.5 10.5 10.5 10.5 12.5 12.5 12.5 13.5 14.3 14 15 16.5 17 17 19 22 22 17.3 19 22 22 13.5 13.5 13.5 13.5 13.5 13.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 24 24 24 27 27 27 27 27 30.5 30.5 30.5 30.5 10.2 10.2 10.2 10.2 10.2 10.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 20.3 20.3 20.3 22.5 22.5 22.5 22.5 22.5 25.4 25.4 25.4 25.4 53 44 37 30 24 21 19 16 13 10 8.4 7 5.6 4.3 4.1 3.4 2.7 3.9 3.3 2.6 2.3 2.1 2.4 2.1 1.8 1.6 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 600 600 600 600 600 600 400 400 400 400 400 400 P276HE102M275(1) P276HE152M275(1) P276HE222M275(1) P276HH332M275(1) P276HL472M275(1) P276HL682M275(1) P276QE682M275(1) P276QE103M275(1) P276QE153M275(1) P276QL223M275(1) P276QL333M275(1) P276QL473M275(1) P276QP683M275(1) P276QS104M275(1) P276CE104M275(1) P276CJ154K275(1) P276CP224K275(1) P276SJ104M275(1) P276SJ154K275(1) P276SP224K275(1) P276SU274K275(1) P276SU334K275(1) P276EG274K275(1) P276EJ334K275(1) P276EL474K275(1) P276EL604K275(1) PME271M410M(1) PME271M415M(1) PME271M422M(1) PME271M433M(1) PME271M447M(1) PME271MA4680M(1) PME271M468M(1) PME271M510M(1) PME271M515M(1) PME271M522M(1) PME271M533M(1) PME271M547M(1) PME271M568M(1) PME271MB6100M(1) PME271M610M(1) PME271M615K(1) PME271M622K(1) PME271MD6100M(1) PME271MD6150K(1) PME271MD6220K(1) PME271MD6270K(1) PME271MD6330K(1) PME271M627K(1) PME271M633K(1) PME271M647K(1) PME271M660K(1) Capacitance Value (F) B (mm) H (mm) L (mm) Lead Spacing (p) fo (MHz) dV/dt (V/s) KEMET Internal Part Number Customer Part Number Capacitance Value (F) fo (MHz) dV/dt (V/s) KEMET Internal Part Number Customer Part Number (1) Insert ordering code for lead type and packaging. See Ordering Options Table for available options. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 6 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183C for SnPb eutectic alloy to 217 - 221C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 - 170C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 - 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Wave Soldering Recommendations Manual Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2 +3 seconds maximum 260C 250 First wave 200 Temperature (C) Recommended Soldering Temperature 400 350 Soldering Iron Bit Temperature (C) Second wave 300 Cooling T < 150C Preheating 150 ca 2C/second ca 3.5C/second typical T preheat 100 ca 5C/second 115 C max 100 C 250 Typical 50 200 150 0 0 100 40 80 120 160 200 240 Time (s) 50 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350C (+10C maximum) with the soldering duration not to exceed more than 3 seconds. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 7 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Soldering Process cont. Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch Pitch 10 mm = 15 mm > 15 mm 15 mm > 15 mm Polyester 130C 130C 130C 270C 270C Polypropylene 100C 110C 130C 260C 270C Paper 130C 130C 140C 270C 270C Polyphenylene Sulphide 150C 150C 160C 270C 270C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160C Polypropylene 110C Paper 160C Polyphenylene Sulphide 160C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 8 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Construction Detailed Cross Section Metallized Impregnated Paper (First Layer) Self-Extinguishing Resin Self-Extinguishing Resin Metallized Impregnated Paper (Second Layer) Margin Margin Metal Contact Layer Margin Leads Metal Contact Layer Winding Scheme Metal Spraying Material Metallization Impregnated Paper Single Design -- Multilayer Impregnated Paper Dielectric 1 Section (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 9 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Marking FRONT Series IEC Climatic Category BACK Voltage Self Healing Approval Mark Approval Mark Manufacturing Date Code TOP Capacitance (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Safety Class F3011_PME271M_X2_275 * 6/3/2019 10 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel 360 mm Large Reel 500 mm Ammo Formed 7.5 8.2 10.5 13.5 13.5 13.5 2,000 2,000 1,600 1,000 1,000 800 700 600 600 1,400 10.2 3.9 4.1 5.1 800 780 630 5.5 6.5 7.5 8.5 5.2 5.5 6 7.3 7.8 8.5 12.5 12.5 14.5 16 10.5 11 12.5 13 13.5 14.3 18 18 18 18 18.5 18.5 18.5 18.5 18.5 18.5 1,000 600 600 400 1,000 1,000 600 600 600 500 500 400 400 250 500 500 400 400 400 300 600 400 400 400 600 500 400 400 400 350 7.6 8.4 9 11.3 14 14 15 16.5 24 24 24 24 1,500 1,200 1,500 1,000 250 200 200 150 250 250 250 180 400 8 10 12 17 19 22 27 27 27 1,200 1,000 800 200 150 100 200 180 350 10.6 10.5 12.1 15.3 16.1 17.3 19 22 30.5 30.5 30.5 30.5 1,000 1,000 800 600 150 100 100 75 15.2 20.3 22.5 25.4 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com 1,200 800 500 500 F3011_PME271M_X2_275 * 6/3/2019 11 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Lead Taping & Packaging (IEC 60286-2) Lead Spacing 20.3 - 22.5 mm Lead Spacing 10.2 - 15.2 mm p p h p h p h h W H1 W2 F H0 H1 F H0 W0 W1 W2 W0 W1 W P1 D0 P0 P0 P1 D0 W D0 t t Formed Leads from 10.2 - 7.5 mm p p h W2 H1 W0 h W1 F = 7.5 H0 W P0 P1 D0 Taping Specification Standard IEC 60286-2 Dimensions in mm Lead Spacing +0.6/-0.1 F Formed 7.5 10.2 15.2 20.3 22.5 F 0.5 W 18.0 18.0 18.0 18.0 18.0 18 +1/-0.5 Minimum W0 5.0 5.0 5.0 5.0 5.0 Position of Sprocket Hole 0.5 W1 9.0 9.0 9.0 9.0 9.0 9 +0.75/-0.5 Distance Between Tapes Maximum W2 3.0 3.0 3.0 3.0 3.0 3.0 Sprocket Hole Diameter 0.2 D0 4.0 4.0 4.0 4.0 4.0 4.0 Feed Hole Lead Spacing 0.3 12.7 12.7 12.7 12.7 12.7 12.7 Distance Lead - Feed Hole 0.7 P1 7.6 5.1 8.9 5.3 P1 Deviation Tape - Plane Maximum p 1.3 1.3 1.3 1.3 1.3 1.3 Lateral Deviation Maximum h 2.0 2.0 2.0 2.0 2.0 2.0 Total Thickness 0.2 t 0.7 0.7 0.7 0.7 0.9 Maximum 0.9 Maximum Nominal H0(2) 18 +2/-0 18 +2/-0 18 +2/-0 18 +2/-0 18.5 0.5 18 +2/-0 Maximum H1(3) 43 43 43 58 58 58 Maximum Carrier Tape Width Hold-Down Tape Width Sprocket Hole/Cap Body Sprocket Hole/Top of Cap Body P0 (1) (1) Maximum cumulative feed hole error, 1 mm per 20 parts (2) 16.5 mm available on request (4) 3.75 (3) Depending on case size (4) 15 mm available on request (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 12 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC Lead Taping & Packaging (IEC 60286-2) cont'd Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx H W T 360 340 59 330 330 50 H T W Reel Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx D H W 355 500 30 25 55 (Max) 360 500 30 46 (Max) D H W Manufacturing Date Code (IEC-60062) Y = Year, Z = Month Year 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 Code A B C D E F H J K L M N P R S T U V W X A Month January February March April May June July August September October November December Code 1 2 3 4 5 6 7 8 9 O N D (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 13 Class X2 Metallized Impregnated Paper EMI Suppression Capacitors - PME271M, Class X2, 275 VAC KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com F3011_PME271M_X2_275 * 6/3/2019 14