©2007 Fairchild Semiconductor Corporation 1www.fairchildsemi.com
EGP30A - EGP30K Rev. A
EGP30A - EGP30K 3.0 Ampere Glass Passivated High Efficiency Rectifiers
July 2007
EGP30A - EGP30K
3.0 Ampere Glass Passivated High Efficiency Rectifiers
Features
• Glass passivated cavity-free junction
• High surge current capability
• Low leakage current
• Superfast recovery time for high efficiency
• Low forward voltage, high current capability
Absolute Maximum Ratings* Ta = 25°C unless otherwise not ed
* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Electrical Characteristics* Ta = 25°C unless otherwise noted
* Pulse Test: Pulse Width≤300μs, Duty Cycle≤2%
Symbol Parameter Value Units
IOAverage Rectified Current
.375 " lead length @ TL = 55°C3.0 A
if(surge) Peak Forward Surge Current
8.3 ms single half- sin e- wa ve
Superimposed on rated load (JEDEC method) 125 A
PDTotal Device Dissipation
Derate above 25°C6.25
50 W
mW°C
RθJA Thermal Resistance, Junction to Ambient 20 °C/W
RθJL Thermal Resistance, Junction to Lead 8.5 °C/W
TJ, TSTG Junction and Storage Temperat ur e Ra ng e -65 ~ 150 °C
Parameter Device Units
30A 30B 30C 30D 30F 30G 30J 30K
Peak Repetitive Reverse Voltage 50 100 150 200 300 400 600 800 V
Maximum RMS Voltage 35 70 105 140 210 280 420 560 V
DC Reverse Voltage (Rated VR)50 100 150 200 300 400 600 800 V
Maximum Reverse Current
@ rated VR TA = 25°C
TA = 125°C5.0
100 μA
μA
Maximum Reve rs e Re co ver y Time
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 50 75 nS
Maximum Forward Voltage @ 3.0 A 0.95 1.25 1.7 V
Typical Ju nct ion Capacitance
VR = 4.0 V, f = 1.0 MHz 95 75 pF
DO-201AD Glas s ca s e
COLOR BAND DENOTES CATHODE
2www.fairchildsemi.com
EGP30A - EGP30K Rev. A
EGP30A - EGP30K 3.0 Ampere Glass Passivated High Efficiency Rectifiers
Typical Performance Characteristics
3www.fairchildsemi.com
EGP30A - EGP30K Rev. A
EGP30A - EGP30K 3.0 Ampere Glass Passivated High Efficiency Rectifiers
Reverse Recovery Time Characterstic and Test Circuit Diagram
TRADEMARKS
The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and
is not intended to be an exhaustive list of all suc h trademarks.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY , FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASS UME ANY LIABILITY ARISING OUT OF
THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE
UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF
FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE
PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for sur gical implant into the bo dy, or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Defi nition of Terms
ACEx®
Build it Now™
CorePLUS™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FPS™
FRFET®
Global Power ResourceSM
Green FPS™
Green FPS™ e-Series™
GTO™
i-Lo™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP-SPM™
Power220®
Power247®
POWEREDGE®
Power-SPM™
PowerTrench®
Programmable Active Droop™
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
UHC®
UniFET™
VCX™
Datasheet Identification Product Status Definition
Advance Information Formative or In Design This datasheet contains the design specifications for product development.
Specifications may change in any manner without notice.
Preliminary First Production This datasheet contains preliminary data; supplementary data will be pub-
lished at a later date. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve design.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves
the right to make changes at any time without notice to improve design.
Obsolete Not In Production This datasheet contains specifications on a product that has been discontin-
ued by Fairchild semiconductor. The datasheet is printed for reference infor-
mation only.
Rev. I30