MBR130LSFT1 Surface Mount Schottky Power Rectifier Plastic SOD-123 Package This device uses the Schottky Barrier principle with a large area metal-to-silicon power diode. Ideally suited for low voltage, high frequency rectification or as free wheeling and polarity protection diodes in surface mount applications where compact size and weight are critical to the system. This package also provides an easy to work with alternative to leadless 34 package style. Because of its small size, it is ideal for use in portable and battery powered products such as cellular and cordless phones, chargers, notebook computers, printers, PDAs and PCMCIA cards. Typical applications are AC-DC and DC-DC converters, reverse battery protection, and "Oring" of multiple supply voltages and any other application where performance and size are critical. http://onsemi.com SCHOTTKY BARRIER RECTIFIER 1.0 AMPERES 30 VOLTS Features * * * * * * * Guardring for Stress Protection Low Forward Voltage 125C Operating Junction Temperature Epoxy Meets UL 94 V-0 Package Designed for Optimal Automated Board Assembly ESD Ratings: Machine Model, C Human Body Model, 3B Pb-Free Package is Available SOD-123FL CASE 498 PLASTIC MARKING DIAGRAM L3LMG G Mechanical Characteristics * * * * * * * * Reel Options: MBR130LSFT1 = 3,000 per 7 in reel/8 mm tape Device Marking: L3L Polarity Designator: Cathode Band Weight: 11.7 mg (approximately) Case: Epoxy, Molded Lead Finish: 100% Matte Sn (Tin) Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds Device Meets MSL 1 Requirements L3L = Specific Device Code M = Date Code G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device MBR130LSFT1 Package Shipping SOD-123FL 3000/Tape & Reel MBR130LSFT1G SOD-123FL 3000/Tape & Reel (Pb-Free) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2005 July, 2005 - Rev. 2 1 Publication Order Number: MBR130LSFT1/D MBR130LSFT1 MAXIMUM RATINGS Rating Symbol Value Unit VRRM VRWM VR 30 V IO 1.0 A Peak Repetitive Forward Current (At Rated VR, Square Wave, 100 kHz, TL = 110C) IFRM 2.0 A Non-Repetitive Peak Surge Current (Non-Repetitive peak surge current, halfwave, single phase, 60 Hz) IFSM 40 A Storage Temperature Tstg -55 to 150 C Operating Junction Temperature TJ -55 to 125 C dv/dt 10,000 V/ms Rtjl Rtjl Rtja Rtja 26 21 325 82 C/W Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TL = 117C) Voltage Rate of Change (Rated VR, TJ = 25C) THERMAL CHARACTERISTICS Thermal Resistance, Junction-to-Lead (Note 1) Thermal Resistance, Junction-to-Lead (Note 2) Thermal Resistance, Junction-to-Ambient (Note 1) Thermal Resistance, Junction-to-Ambient (Note 2) Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Mounted with minimum recommended pad size, PC Board FR4. 2. Mounted with 1 in. copper pad (Cu area 700 mm2). ELECTRICAL CHARACTERISTICS VF Maximum Instantaneous Forward Voltage (Note 3) (IF = 0.1 A) (IF = 0.7 A) (IF = 1.0 A) IR Maximum Instantaneous Reverse Current (Note 3) (VR = 30 V) 3. Pulse Test: Pulse Width 250 ms, Duty Cycle 2%. http://onsemi.com 2 TJ = 25C TJ = 100C 0.29 0.36 0.38 0.18 0.27 0.30 TJ = 25C TJ = 100C 1.0 25 V mA MBR130LSFT1 TYPICAL CHARACTERISTICS TJ = 125C TJ = 100C TJ = 25C 0.1 0.10 TJ = -55C 0.20 0.40 0.30 0.60 0.50 0.70 1 T = 125C J TJ = 100C 0.1 0.10 0.80 0.20 0.30 0.40 0.50 0.60 0.70 VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage TJ = 125C 10E-3 TJ = 25C 10E-6 1E-6 TJ = -55C 100E-9 10E-3 TJ = 100C 1E-3 TJ = 25C 0 10 20 VR, REVERSE VOLTAGE (VOLTS) 30 TJ = -55C 10E-6 0 1.8 freq = 20 kHz dc 1.6 1.4 SQUARE WAVE 1.0 Ipk/IO = p 0.8 Ipk/IO = 5 0.6 Ipk/IO = 10 0.4 Ipk/IO = 20 0.2 0 25 45 65 85 105 10 20 VR, REVERSE VOLTAGE (VOLTS) 30 Figure 4. Maximum Reverse Current 125 145 TL, LEAD TEMPERATURE (C) PFO, AVERAGE POWER DISSIPATION (WATTS) Figure 3. Typical Reverse Current 1.2 TJ = 125C 100E-6 10E-9 1E-9 1E+0 100E-3 TJ = 100C 1E-3 100E-6 IO, AVERAGE FORWARD CURRENT (AMPS) TJ = -55C TJ = 25C VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 100E-3 IR, REVERSE CURRENT (AMPS) IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 1 10 IR, MAXIMUM REVERSE CURRENT (AMPS) IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 10 0.6 0.5 Ipk/IO = p 0.4 dc SQUARE WAVE Ipk/IO = 5 Ipk/IO = 10 0.3 Ipk/IO = 20 0.2 0.1 0 0 Figure 5. Current Derating 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 IO, AVERAGE FORWARD CURRENT (AMPS) Figure 6. Forward Power Dissipation http://onsemi.com 3 1.8 MBR130LSFT1 C, CAPACITANCE (pF) 1000 TJ, DERATED OPERATING TEMPERATURE (C) TYPICAL CHARACTERISTICS TJ = 25 C 100 10 0 5 10 15 20 25 VR, REVERSE VOLTAGE (VOLTS) 30 125 120 RqJA = 25.6 C/W 115 110 105 100 RqJA = 130 C/W 95 90 RqJA = 235 C/W 85 80 75 70 65 RqJA = 324.9 C/W RqJA = 400 C/W 0 r(t), TRANSIENT THERMAL RESISTANCE Figure 7. Capacitance 2 4 6 8 10 12 14 16 18 VR, DC REVERSE VOLTAGE (VOLTS) 20 Figure 8. Typical Operating Temperature Derating 1000 D = 0.5 100 0.2 0.1 0.05 P(pk) 10 0.01 t1 t2 DUTY CYCLE, D = t1/t2 1 SINGLE PULSE qJA = 321.8 C/W Test Type > Min Pad < Die Size 38x38 @ 75% mils 0.1 0.000001 0.00001 0.0001 0.001 0.1 0.01 t1, TIME (sec) Figure 9. Thermal Response http://onsemi.com 4 1 10 100 1000 MBR130LSFT1 PACKAGE DIMENSIONS SOD-123LF CASE 498-01 ISSUE A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH. 4. DIMENSIONS D AND J ARE TO BE MEASURED ON FLAT SECTION OF THE LEAD: BETWEEN 0.10 AND 0.25 MM FROM THE LEAD TIP. E q D DIM A A1 b c D E L HE q A1 POLARITY INDICATOR OPTIONAL AS NEEDED A L b MIN 0.90 0.00 0.70 0.10 1.50 2.50 0.55 3.40 0 MILLIMETERS NOM MAX 0.95 1.00 0.05 0.10 0.90 1.10 0.15 0.20 1.65 1.80 2.70 2.90 0.75 0.95 3.60 3.80 8 - HE q c SOLDERING FOOTPRINT* EE EE EE 0.91 0.036 2.36 0.093 4.19 0.165 EE EE EE SCALE 10:1 1.22 0.048 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 5 MIN 0.035 0.000 0.028 0.004 0.059 0.098 0.022 0.134 0 INCHES NOM 0.037 0.002 0.035 0.006 0.065 0.106 0.030 0.142 - MAX 0.039 0.004 0.043 0.008 0.071 0.114 0.037 0.150 8 MBR130LSFT1 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com http://onsemi.com 6 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MBR130LSFT1/D