02/11/2015 www.crouzet.com 5 Nm 3.5 and 7.2 Watts 7.2 Watts Part number 80547024 Mechanical strength : 5 Nm Constant speed, dependent on supply frequency Direction of rotation controlled by dephasing capacitor Permanent magnet rotor UL, CSA approved ; comply with IEC standards Part numbers 80 547 024 Type Type Voltage / Frequency Base speed of motor (rpm) Output speed (250 rpm) Ratios 7.2 Watts 80 547 0 230-240 V / 50 Hz 250 20 12,5 Specifications Motor Gearbox Maximum permitted continuous rated gearbox output torque for 1 million revolutions of gearbox output shaft (Nm) Axial load static (daN) Radial load static (daN) Absorbed power (W) Motors output (W) Maximum temperature rise (C) Ambient temperature (C) Weight (g) Wires length mm (approximately) Protection rating 82 540 0 81 037 0 5 2 3 7,2 2,65 55 -10+70 860 250 IP40 Accessories Voltages/Frequencies F V AC Code 230-240 V 50 Hz 0,22 5 % 480 26 231 909 115 V - 60 Hz 0,56 5 % 240 26 231 822 24 V - 50 Hz 22 10 % 63 26 231 703 24 V - 60 Hz 15 5 % 70 26 231 728 Capacitors for motor 82 540 0 Dimensions (mm) 80 527 4 - 80 547 0 No Legend 4 holes depth 12M 7 acroos flat Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 www.crouzet.com (pushed-in shaft ) 80 527 4 L1 = 59.2 mm O L2 = 51.3 mm L3 = 25.6 mm 80 547 0 L1 = 76.6 mm O L2 = 65.3 mm L3 = 43 mm Dimensions (mm) Shaft 79 206 478 No Legend (pushed-in shaft ) Curves Torque/speed curves 80 547 0 No Legend RPM Connections In parallel Motors 82 520 4 - 82 540 0 Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 No www.crouzet.com Legend SA : clockwise SI : anti-clockwise Product adaptations Different voltages available Special cable lengths Special connectors Special output shafts Special gearbox ratios Special gear wheel material Special output bearings Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected