Specifications
HN-210 HN-210X HN-214
Frequency Band 2401 - 2471 MHz (USA) — 2448 - 2480 MHz (France, Spain) 2473 - 2495 MHz (Japan)
— 2452 - 2478 MHz (Canada)
Licensing Unlicensed under FCC Part 15, ETSI 300.328
Number of Channels 75 USA; 25 Canada, France, Spain & Japan
Hopping Patterns User configurable, 64 patterns (networks) available
I/O Data Rates Up to 115.2 Kbps Asynchronous
RF Channel Rate 460 Kbps
Line of Site Range > 5 miles
RF Bandwidth 750 KHz
Modulation Type GFSK
Output Impedance 50 ohms
Network Protocol Dynamically assigned TDMA with ARQ
Transmit Power EIRP: +16dBm/+24dBm +18dBm EIRP: +16dBm/+24dBm
Receive Sensitivity -99dBm for 10-5 BER -93 dBm for 10-5 BER -99dBm for 10-5 BER
Power Requirements 9 Vdc 160mA typ. 750mA surge
Serial Data Interface Async. RS-232
The HN-210 is a versatile, low cost, multi-purpose 2.4 GHz frequencyhopping wireless data modem. The
HN-210 communicates through a serial port with over the air of 460.8Kbps and supports both point-to-point
and point-to-multipoint networks.
2.4 GHz
Frequency
Hopping Wireless
Data Modem
HN-210
Features:
• 2.4GHz frequency hopping spread
spectrum technology
• 460Kbps over the air and 115Kbps I/O
data rates
• 64 hopping patterns
• FCC certified and CE marked
• Integral 6dB patch antenna
• RS-232 asynchronous or USB serial
interface
Benefits:
• Exceptional immunity to multipath
fading and jamming
• Supports high speed appli cations
needing long range
• Co-location of multiple networks without
interference
• License-free application worldwide
• Cost-effective, simple installation
• Connects to PC serial ports
©2010-2015 by Murata Electronics N.A., Inc.
SF2072C (R) 01/15/15
1 of 3
www.murata.com
Mechani cal Spec ifica tions
HN-210 HN-210X HN-214
Antenna Integrated 6dB patch n/a Integrated 6dB patch
Case Materials Polycarbonate, NEMA 4X
Dimensions (mm) 130 x 79 x 35 (excl. flange)
Weight excl. cable 235g
Antenna Connector n/a TNC male n/a
Data Connector 9-pin D/USB B
Power Connector 2 pin DIN
Environmental Specifications
Temperature Range -30°C to +70°C (radio enclosure)
Humidity 95% at +40°C, Non-condensing
©2010-2015 by Murata Electronics N.A., Inc.
SF2072C (R) 01/15/15
2 of 3
www.murata.com
Built around the WIT2410 radio, the HN-210 has an integral 6dB patch antenna creating a "single piece" modem. Communication with the HN-210 is
through a 115.2Kbps asynchronous serial port supporting a standard RS-232 interface; a USB version is also avaiable. The HN-210 communicates over
the air at 460.8Kbps and supports both point-to-point and point-to-multipoint networks. With a NEMA 4X weatherproof enclosure and aluminum mounting
flange, the HN-210 is simple to install on the side of a building or attached to a mast. With no antenna to connect, the HN-210 is simply mounted where the
antenna would ordinarily be mounted. This removes the need for long antenna cable runs, expensive in terms of both cost and performance.
The HN-210 comes with a 50-foot cable that connects to an indoor serial adapter box (included) that provides a standard RS-232 serial 9-pin D connection.
The HN-214 comes with a 4-foot cable for use when long cable runs are not needed. The serial adapter box also provides power to the HN-210 through a
universal 110/220 50/60 wall-mount power supply (also included).
The integral 6dB patch antenna provides a line-of-site range of several miles, making the HN-210 ideal for a variety of "last mile" applications. For
applications requiring more antenna gain, the HN-210X replaces the built-in patch antenna with an external TNC connector.
When paired with the Murata SNAP2410 family of products, the HN-210 provides a cost-effective link from remote devices to Ethernet/IP-based
applications. These applications include Intranetbased applications as well as Internet access. The HN-210 also is ideal for use in SCADA applications
as remote modems in multipoint configurations and is an extremely cost-effective solution for point-to-point installations. Selectable transmit power
levels of 10mW and 100mW allow the HN-210 to be used worldwide, even with the gain of the patch antenna.
Based on the M WIT2410 spread spectrum frequency-hopping radio, the HN-210 has exceptional multipath fade rejection as well as immunity to jamming.
The WIT2410 is a field proven performer that delivers robust, reliable, real-world performance.
The HN-210 is both FCC and CE marked. Operating in the 2.4GHz ISM band, the HN-210 can be deployed around the world without a license.
©2010-2015 by Murata Electronics N.A., Inc.
SF2072C (R) 01/15/15
3 of 3
www.murata.com
