HN-210 Features: * 2.4GHz frequency hopping spread spectrum technology * 460Kbps over the air and 115Kbps I/O data rates * 64 hopping patterns * FCC certified and CE marked * Integral 6dB patch antenna * RS-232 asynchronous or USB serial interface Benefits: * Exceptional immunity to multipath fading and jamming * Supports high speed applications needing long range * Co-location of multiple networks without interference * License-free application worldwide * Cost-effective, simple installation * Connects to PC serial ports 2.4 GHz Frequency Hopping Wireless Data Modem The HN-210 is a versatile, low cost, multi-purpose 2.4 GHz frequencyhopping wireless data modem. The HN-210 communicates through a serial port with over the air of 460.8Kbps and supports both point-to-point and point-to-multipoint networks. Specifications HN-210 Frequency Band HN-210X Licensing Unlicensed under FCC Part 15, ETSI 300.328 Number of Channels 75 USA; 25 Canada, France, Spain & Japan Hopping Patterns User configurable, 64 patterns (networks) available I/O Data Rates Up to 115.2 Kbps Asynchronous RF Channel Rate 460 Kbps Line of Site Range > 5 miles RF Bandwidth 750 KHz Modulation Type GFSK Output Impedance 50 ohms Network Protocol Transmit Power Receive Sensitivity HN-214 2401 - 2471 MHz (USA) -- 2448 - 2480 MHz (France, Spain) 2473 - 2495 MHz (Japan) -- 2452 - 2478 MHz (Canada) Dynamically assigned TDMA with ARQ EIRP: +16dBm/+24dBm +18dBm EIRP: +16dBm/+24dBm -99dBm for 10-5 BER -93 dBm for 10-5 BER -99dBm for 10-5 BER Power Requirements 9 Vdc 160mA typ. 750mA surge Serial Data Interface Async. RS-232 (c)2010-2015 by Murata Electronics N.A., Inc. SF2072C (R) 01/15/15 1 of 3 www.murata.com Mechanical Specifications Antenna HN-210 HN-210X HN-214 Integrated 6dB patch n/a Integrated 6dB patch Case Materials Polycarbonate, NEMA 4X Dimensions (mm) 130 x 79 x 35 (excl. flange) Weight excl. cable 235g Antenna Connector n/a Data Connector TNC male n/a 9-pin D/USB B Power Connector 2 pin DIN Environmental Specifications Temperature Range -30C to +70C (radio enclosure) Humidity 95% at +40C, Non-condensing (c)2010-2015 by Murata Electronics N.A., Inc. SF2072C (R) 01/15/15 2 of 3 www.murata.com Built around the WIT2410 radio, the HN-210 has an integral 6dB patch antenna creating a "single piece" modem. Communication with the HN-210 is through a 115.2Kbps asynchronous serial port supporting a standard RS-232 interface; a USB version is also avaiable. The HN-210 communicates over the air at 460.8Kbps and supports both point-to-point and point-to-multipoint networks. With a NEMA 4X weatherproof enclosure and aluminum mounting flange, the HN-210 is simple to install on the side of a building or attached to a mast. With no antenna to connect, the HN-210 is simply mounted where the antenna would ordinarily be mounted. This removes the need for long antenna cable runs, expensive in terms of both cost and performance. The HN-210 comes with a 50-foot cable that connects to an indoor serial adapter box (included) that provides a standard RS-232 serial 9-pin D connection. The HN-214 comes with a 4-foot cable for use when long cable runs are not needed. The serial adapter box also provides power to the HN-210 through a universal 110/220 50/60 wall-mount power supply (also included). The integral 6dB patch antenna provides a line-of-site range of several miles, making the HN-210 ideal for a variety of "last mile" applications. For applications requiring more antenna gain, the HN-210X replaces the built-in patch antenna with an external TNC connector. When paired with the Murata SNAP2410 family of products, the HN-210 provides a cost-effective link from remote devices to Ethernet/IP-based applications. These applications include Intranetbased applications as well as Internet access. The HN-210 also is ideal for use in SCADA applications as remote modems in multipoint configurations and is an extremely cost-effective solution for point-to-point installations. Selectable transmit power levels of 10mW and 100mW allow the HN-210 to be used worldwide, even with the gain of the patch antenna. Based on the M WIT2410 spread spectrum frequency-hopping radio, the HN-210 has exceptional multipath fade rejection as well as immunity to jamming. The WIT2410 is a field proven performer that delivers robust, reliable, real-world performance. The HN-210 is both FCC and CE marked. Operating in the 2.4GHz ISM band, the HN-210 can be deployed around the world without a license. (c)2010-2015 by Murata Electronics N.A., Inc. SF2072C (R) 01/15/15 3 of 3 www.murata.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Murata: HN-214DX HN-210 HN-214X HN-214 HN-210X