MCO 75 Single Thyristor Module ITRMS = 121 A VRRM = 1200-1600 V ITAV = 77 A Preliminary data VRSM VDSM VRRM VDRM V V 1200 1600 1200 1600 G1 K2/4 Type miniBLOC, SOT-227 B K2 G1 MCO 75-12io1 MCO 75-16io1 A3 K4 A3 Symbol Conditions ITRMS ITAV TVJ = TVJM TC = 80C; (180 sine) ITSM TVJ = 45C; VR = 0 I2t (di/dt)cr Maximum Ratings 121 77 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1070 1150 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 950 1000 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 5700 5550 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 4500 4200 A2s A2s TVJ = TVJM repetitive, IT = 150 A f = 50 Hz, tP = 200 s VD = 2/3 VDRM IG = 0.3 A non repetitive, IT = ITAVM diG/dt = 0.3 A/s 150 A/s 500 A/s 1000 V/s (dv/dt)cr TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM tp = 30 s tp = 300 s PGAVM 10 5 0.5 W W W VRGM 10 V TVJ TVJM Tstg -40...+150 150 -40...+150 C C C 2500 V~ IISOL 1 mA VISOL 50/60 Hz, RMS; Md Mounting torque (M4) Terminal connection torque (M4) Weight typ. Features * International standard package miniBLOC (ISOTOP compatible) * Isolation voltage 2500 V~ * Planar passivated chips Applications * Solid state switches * motor control * soft starter * light and temperature control Advantages * Easy to mount with two screws * Space and weight savings * Improved temperature and power cycling * High power density 1.1 - 1.5 / 9 - 13 Nm/lb.in. 1.1 - 1.5 / 9 - 13 Nm/lb.in. 30 g IXYS reserves the right to change limits, Conditions and dimensions. (c) 2006 IXYS All rights reserved 0644 Data according to IEC 60747 and to a single thyristor/diode unless otherwise stated. 1-2 http://store.iiic.cc/ MCO 75 Symbol Conditions Characteristic Values IRRM / DRM TVJ = 125C; VR = VRRM; VD = VDRM 10 mA VT IT = 75; TVJ = 25C 1.3 V VT0 rT For power-loss calculations only 0.85 5.5 V m VGT VD = 6 V; IGT VD = 6 V; VGD IGD TVJ = TVJM; IL TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C 1.5 1.6 100 150 V V mA mA VD = 2/3 VDRM 0.2 10 V mA TVJ = 25C; tP = 10 s IG = 0.3 A; diG/dt = 0.3 A/s 450 mA IH TVJ = 25C; VD = 6 V; RGK = 200 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.3 A; diG/dt = 0.3 A/s 2 s tq TVJ = TVJM; IT = 11 A, tP = 200 s; di/dt = -10 A/s VR = 100 V; dv/dt = 15 V/s; VD = 2/3 VDRM typ. 150 s RthJC RthCH DC current DC current typ. 0.45 0.2 K/W K/W dS dA a Creeping distance on surface Creepage distance in air Max. allowable acceleration 8 4 50 mm mm m/s2 M4 screws (4x) supplied Dim. IXYS reserves the right to change limits, Conditions and dimensions. (c) 2006 IXYS All rights reserved Millimeter Min. Max. Inches Min. Max. A B 31.50 7.80 31.88 8.20 1.240 0.307 1.255 0.323 C D 4.09 4.09 4.29 4.29 0.161 0.161 0.169 0.169 E F 4.09 14.91 4.29 15.11 0.161 0.587 0.169 0.595 G H 30.12 37.80 30.30 38.23 1.186 1.489 1.193 1.505 J K 11.68 8.92 12.22 9.60 0.460 0.351 0.481 0.378 L M 0.76 12.60 0.84 12.85 0.030 0.496 0.033 0.506 N O 25.15 1.98 25.42 2.13 0.990 0.078 1.001 0.084 P Q 4.95 26.54 5.97 26.90 0.195 1.045 0.235 1.059 R S 3.94 4.72 4.42 4.85 0.155 0.186 0.174 0.191 T U 24.59 -0.05 25.07 0.1 0.968 -0.002 0.987 0.004 V W 3.30 0.780 4.57 0.830 0.130 19.81 0.180 21.08 0644 miniBLOC, SOT-227 B 2-2 http://store.iiic.cc/