OPTICAL SPECIFICATIONS1
MEMS REFLECTION ON/OFF OPTICAL SWITCH SPECIFICATIONS / ORDERING INFORMATION
DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510) 620-5000 Fax. (510) 620-4100 www.diconfi beroptics.com
PARAMETER RATING
Insertion Loss2,3 0.7 dB max.
Back Refl ection -45 dB max.
Switching Time 5 ms max.
TDL 0.30 dB max.
WDL40.20 dB max.
PDL 0.10 dB max.
Repeatability50.02 dB max.
Durability 109 cycles min.
Optical Power 500 mW max.
Operating Temp-5 to 70oC
Storage Temp -40 to 85oC
Fiber Type 9/125 µm single mode
ELECTRICAL SPECIFICATIONS
PARAMETER RATING
Latching Type Non-latching
Control Type Direct Voltage
Vcc
Voltage
Transparent 0 - 5 VDC
Opaque10 - 7 VDC
Power Consumption 20 µW max.
MECHANICAL DIMENSIONS
(Units: mm)
MEMS REFLECTION ON/OFF OPTICAL SWITCH
MS
Product Code
MS MEMS Switch
Switch Configuration
REF10 Reflection
On/Off Switch
T Transparent Switch
O Opaque Switch
Wavelength Range
FC/SPC FC/SPC
FC/APC FC/APC
N NONE
1 1 Meter
X Specify X Meters
9/BF Corning SMF-28, bare fiber
9/LT Corning SMF-28, loose tube
REF10
Also Available: SC, SC/UPC, SC/APC, ST, ST/UPC, LC
0156A
1. Specifi cations are without connectors.
2. IL is measured at CWL, 23oC.
3. IL is for single-band. Dual-band option adds 0.1 dB.
4. WDL is measured in a +/- 20nm range at 23oC.
5. Repeatability is defi ned after 100 cycles.
13 1290 - 1330 nm
15 1530 - 1570 nm
16 1570 - 1610 nm
13/15 1290 - 1330 & 1530 - 1570 nm
15/16 1530 - 1550 & 1570 - 1610 nm
Or other equivalent 9 µm Singlemode fiber
Tolerance is +/- 10 cm
Switch Type
Pigtail Length
Connector Type
Fiber and Jacket Type
Housing
Pin Bending
1. Min. IL is between 6 and 7 VDC.
ORDERING INFORMATION
35 35 dB min.
45 45 dB min.
X Specify X dB min.
Off State Isolation