Part Number: ZMY77W 4.5x2mm SMD CHIP LED LAMP www.SunLED.com Features 4.5x2mm SMT LED,0.5mm THICKNESS LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 1000PCS/REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. Absolute Maximum Ratings (TA=25C)) MY (InGaAlP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 mA Power Dissipation PT 125 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZMY77W Emitting Color Yellow Published Date : MAY 22,2006 Emitting Material InGaAlP C Operating Characteristics (TA=25C)) Drawing No : SDSA2823 Unit Forward Voltage (Typ.) (IF=20mA) VF 2.0 V Forward Voltage (Max.) (IF=20mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) P 590 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) D 588 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) 28 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 25 pF Luminous Intensity (IF=20mA) mcd Lens-color Water Clear MY (InGaAlP) min. typ. 110 447 V4 Wavelength nm P Viewing Angle 2 1/2 590 20 Checked : B.L.LIU P.1/3 Part Number: ZMY77W 4.5x2mm SMD CHIP LED LAMP www.SunLED.com MY Published Date : MAY 22,2006 Drawing No : SDSA2823 V4 Checked : B.L.LIU P.2/3 Part Number: ZMY77W 4.5x2mm SMD CHIP LED LAMP www.SunLED.com Recommended Soldering Pattern (Units : mm;Tolerance: 0.1) Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAY 22,2006 Drawing No : SDSA2823 V4 Checked : B.L.LIU P.3/3