Published Date : MAY 22,2006 Drawing No : SDSA2823 V4 Checked : B.L.LIU P.1/3
Part Number: ZMY77W
4.5x2mm SMD CHIP LED LAMP
www.SunLED.com
Part
Number
Emitting
Color
Emitting
Material Lens-color
Luminous
Intensity
(IF=20mA)
mcd
Wavelength
nm
λP
Viewing
Angle
2θ1/2
min. typ.
ZMY77W Yellow InGaAlP Water Clear 110 447 590 20°
Absolute Maximum Ratings
(TA=25°C)
) )
)
MY
(InGaAlP) Unit
Reverse Voltage VR5 V
Forward Current IF30 mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS 150 mA
Power Dissipation PT125 mW
Operating Temperature TA-40 ~ +85
°C
Storage Temperature Tstg -40 ~ +85
Operating Characteristics
(TA=25°C)
) )
)
MY
(InGaAlP) Unit
Forward Voltage (Typ.)
(IF=20mA) VF2.0 V
Forward Voltage (Max.)
(IF=20mA) VF2.5 V
Reverse Current (Max.)
(VR=5V) IR10 uA
Wavelength of Peak
Emission (Typ.)
(IF=20mA) λP590 nm
Wavelength of Dominant
Emission (Typ.)
(IF=20mA) λD588 nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA) ∆λ 28 nm
Capacitance (Typ.)
(VF=0V, f=1MHz) C25 pF
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
Features
4.5x2mm SMT LED,0.5mm THICKNESS
LOW POWER CONSUMPTION.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 1000PCS/REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 3.
RoHS COMPLIANT.
Published Date : MAY 22,2006 Drawing No : SDSA2823 V4 Checked : B.L.LIU P.2/3
Part Number: ZMY77W
4.5x2mm SMD CHIP LED LAMP
www.SunLED.com
MY
Published Date : MAY 22,2006 Drawing No : SDSA2823 V4 Checked : B.L.LIU P.3/3
Part Number: ZMY77W
4.5x2mm SMD CHIP LED LAMP
www.SunLED.com
Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Recommended Soldering Pattern (Units : mm;Tolerance:±0.1)
