NEW RFID System V680 Series Next-Generation RFID System Conforming to ISO/IEC 18000-3 (ISO/IEC 15693). New 100-mm x 100-mm Antennas Available. Visualize data transmission on production lines. Managing process instructions and histories for engine manufacturing Managing manufacturing process traceability Managing the manufacture of LCDs and color filters Managing dies, die histories, and die service lives Versatile Functions for Optimal Use on Production Lines Conforms to ISO/IEC 18000-3 (ISO/IEC 15693) Can be used in many countries around the world. The V680 Series can be used in many parts of the world because it meets the requirements of radio wave regulations in Japan, Europe, the U.S.A., Canada, Mexico, Singapore, Malaysia, the Philippines, China, Hong Kong, Taiwan, and Korea. (The V680-HS65/-H01 meets the requirements of radio wave regulations in Japan, Europe, and the U.S.A.) Contact your OMRON sales representative for details on use in other countries. Enables High-speed Data Transmission High-speed transmission of 27 kbps achieved. The V680 Series offers data transmission speeds as high as 27 kbps at an operating frequency of 13.56 MHz, and dramatically shortens turn around time (TAT) with a Self-execution Mode that eliminates the need for host access. Self-execution system ID Tag transmission time Judgment and instruction Conventional system Host send (response) judgment and instruction time Host send (command) time Judgment and instruction ID Tag transmission time TAT TAT A Wide Range of ID Tags Available for Various Production Lines These ultra-compact Tags also feature high environmental durability, long service lives, and maintenance-free operation. ID Tags can be either embedded in metal or mounted on non-metallic objects without requiring any extra attachments. A long service life enables 10 billion accesses. A new battery-less model with a large, 32-Kbyte capacity has been added to the line-up. In addition to managing the growing amount of production and quality data on today's factory floors, this new Tag makes it easy to build a system with traceability. The V680 Series features the same level of environmental durability as the previous V600 Series. 10 billion accesses Long service life Battery-less No Changes Needed when Switching from an Existing System The V680 Series also supports V600-series commands, so there is no need to change command systems. Easier Startup and Maintenance. Simpler Operation. Lets You Visualize Data Transmission Contributes to higher efficiency for on-site startup and maintenance. Seven maintenance modes make it easy to diagnose the optimal usage conditions for the V680 RFID System. Startup is also easier because the system can be checked without having to use a personal computer or other host device. Maintenance modes are quickly switched with the DIP switch on the front of the Controller. The Amplifier Unit is also equipped with an indicator that displays the communications condition, for easy confirmation from the location nearest the production line. Strong Support for Creating ID Tag Memory Maps Using the ID Map Manager dramatically shortens the time required to allocate ID Tag memory and complete system designs. Work efficiency is greatly increased because the ID Map Manager includes an ID Tag read/write test function and communications checking function in addition to memory map definition and editing functions. Memory map data created by the ID Map Manager can also be easily shared between the production line design department and the vendors that are building the line. V680-A-IMMEG-P01 Visualize Data Transmission without the Need for a Host Device. Perform Simple Diagnosis of Communications Conditions. Distance Level Measurement Mode Confirms correct mounting positions for the Read/Write Antenna and ID Tag. The distance between the Read/Write Antenna and ID Tag mounting locations relative to the communications range is displayed using six levels. Distance level "--" Controller Amplifier Unit ID Tag "01" "02" "03" "04" "05" "06" Read/Write Antenna Distant Close Noise Level Measurement Mode Confirms spatial noise, noise sources, and noise countermeasure effects. Measures the ambient noise level and displays it in levels ranging from 00 to 99. Controller Read/Write Antenna Little noise Much noise Speed Level Measurement Mode (Read/Write) Confirms the speed of moving ID Tags and the number of usable bytes. Data is transmitted repeatedly to moving ID Tags, and the number of successful communications and speed level are displayed in levels ranging from 01 to 99. (No data is actually written to the ID Tags during the write part of the Speed Level Measurement Mode.) Controller Movement ID Tag Read/Write Antenna More than 99 successful communications Seven maintenance modes make it easy to diagnose the communications conditions from the front panel of the Controller or Amplifier Unit. The data can also be output from the USB port of the Controller to a personal computer or other monitoring device. (Maintenance Mode cannot be used when the V680-H01 Antenna is connected.) Communications Success Rate Measurement Mode Confirms the communications success rate between the Read/Write Antenna and ID Tags. A total of 100 communications are executed without retries, and the rate of communications success is displayed in levels ranging from 01 to 99. Controller ID Tag 100 communications Read/Write Antenna Communications successes: 23 Host Device Communications Monitor Mode (Protocol Analyzer Function) This mode can be used as a protocol analyzer function for host device communications lines. The communications commands sent from the host device and the execution result responses can be output from the USB port of the Controller. Monitor Host device Command: RDSTH100100010*CR Monitor: RDSTH100100010*CR RD72*CR Read/Write Antenna Personal computer Programmable Controller (PLC) Notebook PC Response: RD72*CR Tag Communications Test Mode Confirms communications ability between the Read/Write Antenna and ID Tags. The end codes are displayed to show the results of communications between the Read/Write Antenna and ID Tags. When the Controller is mounted inside a control panel, or in some other location, this data can be output from the Controller's USB port and easily checked on a monitor. (The Tag Communications Test Mode uses only read operations.) Controller Normal communication Communications error Host Device Communications Confirmation Mode Confirms whether the signals sent from the Controller are being correctly transferred to an external device. The communications commands and responses between the Controller and a host device are output from the Controller's USB port for easy identification of problems, such as incorrect communications parameters or wiring. RFID System V680 Series New, Next-generation RFID Systems with ISO/IEC 18000-3 (ISO/IEC15693) Compliance * High-speed, 27-kbps transmission response-only speed of 53 kbps from the V680-D@KF68. * Read/Write Antennas and ID Tags with excellent environmental resistance. * Wide line-up of ultra-compact, long-life ID Tags, with capacities from 1 to 32 Kbytes. * Seven modes make it possible to visualize data transmission. * ID Map Manager simplifies memory map designing for ID Tags. * Complies with FCC Standards and R&TTE Directive. System Configuration ID Tag 1-Kbyte memory V680-D1KP52MT (8 dia. x 5 mm) For embedding in metallic or non-metallic surface Read/Write Antenna Cylinder type V680-HS52 Amplifier Unit 2-Kbyte memory V680-D2KF52M (8 dia. x 5 mm) For embedding in metallic or non-metallic surface V680-HA63A 1-channel type V680-CA5D01-V2 -W: Standard cable, waterproof connector -R: Flexible cable, non-waterproof connector Personal computer Amplifier Unit Special Extension Cable V700-A43/-A44 Square type V680-HS63 For 2-, 8-, or 32-Kbyte ID Tags V680-D2KF67M (40 x 40 x 4.5 mm) For flush mounting on metallic surface 2-channel type V680-CA5D02-V2 V680-HA63B V680-HS65 V680-D2KF67 (40 x 40 x 4.5 mm) For flush mounting on non-metallic surface 8-Kbyte/32-Kbyte memory V680-D8KF68/-D32KF68 (86 x 54 x 10 mm) For flush mounting on non-metallic surface -W: Standard cable, waterproof connector -R: Flexible cable, non-waterproof connector V680-H01 1-Kbyte memory with high-temperature capability V680-D1KP58HT Special Cable V700-A40-W 6 Host Device For 1-Kbyte ID Tags V680-D1KP66MT (34 x 34 x 3.5 mm) For flush mounting on metallic surface V680-D1KP66T (34 x 34 x 3.5 mm) For flush mounting on non-metallic surface Controller V680 Series RFID System Amplifier Unit Special Extension Cable V700-A43/-A44 Communications interfaces RS-232C, RS-422, RS-485 1-channel type V680-CA5D01-V2 Programmable Controller Ordering Information ID Tag Type Battery-less Memory capacity Appearance 1 Kbyte 2 Kbytes Size Model For embedding in metallic V680-D1KP52MT or non-metallic surface Square 34 x 34 x 3.5 mm For flush mounting on metallic surface V680-D1KP66MT For flush mounting on non-metallic surface V680-D1KP66T 8 dia. x t10 mm (High-temperature type) For flush mounting on non-metallic surface V680-D1KP58HT Cylindrical, ultracompact 8 dia. x 5 mm For embedding in metallic V680-D2KF52M or non-metallic surface Square 40 x 40 x 4.5 mm For flush mounting on metallic surface V680-D2KF67M For flush mounting on non-metallic surface V680-D2KF67 For flush mounting on non-metallic surface V680-D8KF68 86 x 54 x 10 mm 8 Kbytes Metallic compatibility Cylindrical, ultracompact 8 dia. x 5 mm 32 Kbytes V680-D32KF68 Read/Write Antenna (Detachable Amplifier Unit Type) Type Cylindrical Appearance Size M22 x 65 mm Standard cable, waterproof connector Flexible cable, nonwaterproof connector Square 40 x 53 x 23 mm Standard cable, waterproof connector Flexible cable, nonwaterproof connector 100 x 100 x 30 mm Standard cable, waterproof connector Flexible cable, nonwaterproof connector Cable length Model 2m V680-HS52-W 2M 12.5 m V680-HS52-W 12.5M 2m V680-HS52-R 2M 12.5 m V680-HS52-R 12.5M 2m V680-HS63-W 2M 12.5 m V680-HS63-W 12.5M 2m V680-HS63-R 2M 12.5 m V680-HS63-R 12.5M 2m V680-HS65-W 2M 12.5 m V680-HS65-W 12.5M 2m V680-HS65-R 2M 12.5 m V680-HS65-R 12.5M Read/Write Antenna with Built-in Amplifier Type Square Appearance Size 250 x 200 x 35 mm Cable length 0.5 m (See note.) Model V680-H01 Note: Use an Antenna Cable to connect the Read/Write Antenna to the Controller. The maximum cable length is 30.5 m. V680 Series RFID System 7 Amplifier Unit Type Appearance Size 25 x 40 x 65 mm For 1-Kbyte memory For 2-/8-/32-Kbyte memory Cable length Model 5m V680-HA63A 5M 10 m V680-HA63A 10M 5m V680-HA63B 5M 10 m V680-HA63B 10M Note: The maximum extendable cable length is 50 m (including the Amplifier Unit cable). The maximum number of V700-A43/-A44 Amplifier Unit Special Extension Cables that can be connected is two. Controller Type DC power supply No. of connectable Amplifiers Appearance Size 105 x 90 x 65 mm Single Transmission interface RS232C, RS422/RS485 Dual Model V680-CA5D01-V2 V680-CA5D02-V2 Accessories (Order Separately) ID Tag Attachment Type Appearance Model For the V680-D1KP66T V600-A86 For the V680-D@KF68 V680-A81 To mount the V680-D1KP58HT V680-A80 Amplifier Unit Special Extension Cable (Amplifier Unit to Controller) Cable length Appearance Model 10 m V700-A43 10 M 20 m V700-A44 20 M V680-H01 Read/Write Antenna Special Cable (Read/Write Antenna to Controller) Cable length Appearance Model 2m V700-A40-W 2M 5m V700-A40-W 5M 10 m V700-A40-W 10M 20 m V700-A40-W 20M 30 m V700-A40-W 30M Note: The maximum cable length is 30.5 m. If extending the cable length, connect only one additional cable. (Do not connect more than two cables together.) RS-232C Communications Connector Name ID Map Manager Model Connector Plug XM3B-0922-111 Connector Hood XM2S-0911 Type English version Note: An RS422/RS485 Communications Connector is provided with the RFID System. 8 V680 Series RFID System Model V680-A-IMMEG-P01 Ratings and Performance ID Tag (1-Kbyte Memory) Item Model V680-D1KP52MT Memory capacity 1,000 byte (user area) Memory type EEPROM Data backup time 10 years after writing Memory longevity 100,000 times per block (at 25C) Ambient operating temperature (during transmission) -25 to 85C (with no icing) Ambient operating temperature (not during transmission) -40 to 125C (with no icing) Ambient storage temperature -40 to 125C (with no icing) Ambient operating humidity 35 to 95% Degree of protection IEC 60529, IP68 V680-D1KP66T V680-D1KP66MT Heat resistance: 1,000 thermal cycles each of 30 minutes at -10C/150C, High-temperature storage: 1,000 hours at 150C (See Note 1.) 200 thermal cycles each of 30 minutes at -10C/180C, High-temperature storage: 200 hours at 180C (See Note 2.) In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (See note 3.) Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 8 dia. x 5 mm 34 x 34 x 3.5 mm Materials Case: PPS resin Filling: Epoxy resin Molding: PPS resin Weight Approx. 0.5 g Approx. 6 g Approx. 7.5 g Metallic compatibility Yes No Yes Note 1. 150C heat resistance: The heat resistance has been checked at 150C for up to 1,000 hours, and thermal shock has been checked through testing 1,000 thermal cycles each of 30 minutes at -10/150C. (Test samples: 22, defects: 0) 2. 180C heat resistance: The heat resistance has been checked at 180C for up to 200 hours, and thermal shock has been checked through testing 200 thermal cycles each of 30 minutes at -10C/180C. (Test samples: 22, defects: 0) 3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. 4. For details, refer to the User's Manual (Cat. No. Z262). ID Tag with 1-Kbyte Memory with High-temperature Capability Item Model V680-D1KP58HT Memory capacity 1,000 byte (user area) Memory type EEPROM Data backup time 10 years after writing (See note.) Memory longevity 100,000 times per block (at 85C) Ambient operating temperature (during transmission) -10 to 85C (with no icing) Ambient operating temperature (not during transmission) -40 to 110C (with no icing) Ambient storage temperature -40 to 110C (with no icing) Ambient operating humidity No limits. Degree of protection IEC 60529, IP67 Vibration resistance 10 to 2,000 Hz, 1.5-mm single amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each Materials PPS resin Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Weight Approx. 90 g Heat resistance: 2,000 thermal cycles each of 30 minutes at room temperature/200C (Refer to Heat Resistance, below, for details.) Note: The data storage time at high temperatures (110 to 200C) is 10 hours. Rewrite the data before 10 hours has lapsed. Heat Resistance Sufficient heat resistance has been confirmed by evaluation testing comprising 2,000 thermal cycles each of 30 minutes at room temperature/ 200C (Criterion: LTPD 10%). The lifetime of the V680-D1KP58HT is affected by high-temperature storage, due to the effects of high temperatures on internal components. For details on the relationship between heat resistance and lifetime, refer to the User's Manual (Cat. No. Z221). V680 Series RFID System 9 ID Tag (2-Kbyte Memory) Item Model V680-D2KF52M V680-D2KF67 V680-D1KF67M Memory capacity 2,000 bytes (user area) Memory type FRAM Data backup time 10 years after writing (55C or less) Memory longevity 10 billion times per block. Access frequency (See note 1.): 10 billion times Ambient operating temperature -25 to 85C (with no icing) Ambient storage temperature -40 to 85C (with no icing) Ambient operating humidity 35 to 95% Degree of protection IEC 60529, IP67 Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 8 dia. x 5 mm 40 x 40 x 4.5 mm Materials Case: PPS resin Filling: Epoxy resin Molding: ABS resin Filling: Epoxy resin Weight Approx. 0.5 g Approx. 6.5 g Approx. 7 g Metallic compatibility Yes No Yes 35 to 85% Note 1. The total Read or Write communication frequency is called the access frequency. 2. For details, refer to the User's Manual (Cat. No. Z248). ID Tag with 8-/32-Kbyte Memory Item Model V680-D8KF68 V680-D32KF68 Memory capacity 8,192 bytes (user area) 32,744 bytes (user area) Memory type FRAM Data backup time 10 years (at 70C max.) or 6 years (at 85C max.) after data is written Memory longevity 10 billion times per block at 85C max. Access frequency (See note 1.): 10 billion times Ambient operating temperature -20 to 85C (with no icing) Ambient storage temperature -40 to 85C (with no icing) Ambient operating humidity 35 to 85% Degree of protection IEC 60529, IP67 In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (See note 2.) Vibration resistance 10 to 500 Hz, 1.5-mm double amplitude at 100 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Dimensions 86 x 54 x 10 mm Materials Case: PBT resin Filling: Epoxy resin Weight Approx. 50 g Metallic compatibility No Note 1. The total Read or Write communication frequency is called the access frequency. 2. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. 3. For details, refer to the User's Manual (Cat. No. Z248). 10 V680 Series RFID System Cylindrical Read/Write Antenna (Detachable Amplifier Unit Type) Model Item V680-HS52-W (Standard Cable, Waterproof Connector) V680-HS52-R (Flexible Cable, Non-waterproof Connector) Ambient operating temperature -10 to 60C (with no icing) Ambient storage temperature -25 to 75C (with no icing) Ambient operating humidity 35% to 95% (with no condensation) Insulation resistance 20 M min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP67 (IEC60529) In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write Antenna portion) (See note 1.) Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance M22 x 65 mm Materials ABS, brass, epoxy resin filling Weight Approx. 850 g (with 12.5-m cable) IP67 (IEC60529) In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write Antenna portion) (See note 2.) Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. 2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. 3. For details, refer to the User's Manual (Cat. No. Z248 or Z262). Square Read/Write Antenna (Detachable Amplifier Unit Type) Model Item V680-HS63-W (Standard Cable, Waterproof Connector) V680-HS63-R (Flexible Cable, Non-waterproof Connector) Ambient operating temperature -10 to 60C (with no icing) Ambient storage temperature -25 to 75C (with no icing) Ambient operating humidity 35% to 95% (with no condensation) Insulation resistance 20 M min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP67 (IEC60529) In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write Antenna portion) (See note 1.) Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 40 x 53 x 23 mm Materials ABS, epoxy resin filling Weight Approx. 850 g (with 12.5-m cable) Model Item V680-HS65-W (Standard Cable, Waterproof Connector) IP67 (IEC60529) In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write Antenna portion) (See note 2.) V680-HS65-R (Flexible Cable, Non-waterproof Connector) Ambient operating temperature -25 to 70C (with no icing) Ambient storage temperature -40 to 85C (with no icing) Ambient operating humidity 35% to 95% (with no condensation) Insulation resistance 20 M min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write Antenna portion) (See note 1.) Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 100 x 100 x 30 mm Materials ABS, epoxy resin filling Weight Approx. 1,100 g (with 12.5-m cable) In-house standard for antenna oil resistance (former JEM standard equivalent to IP67g) (Read/Write Antenna portion) (See note 2.) Note 1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. 2. The Connector is not waterproof. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. 3. For details, refer to the User's Manual (Cat. No. Z248 or Z262). V680 Series RFID System 11 Square Read/Write Antenna with Built-in Amplifier Item Model V680-H01 Ambient operating temperature -10 to 55C (with no icing) Ambient storage temperature -35 to 65C (with no icing) Ambient operating humidity 35% to 85% (with no condensation) Ambient storage humidity 35% to 95% (with no condensation) Insulation resistance 20 M min. (at 100 VDC) between the back plate and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the back plate and the case with a current leakage of 1 mA max. Degree of protection IEC 60529: IP63 (Mounting direction: Transmission surface facing up) Vibration resistance 10 to 150 Hz variable vibration, 0.7-mm double amplitude with 4 sweeps in X, Y, and Z directions for 8 minutes each Shock resistance 150 m/s2 in X, Y, and Z directions 3 times each Cable length 0.5 m (See note 1.) Weight Approx. 900 g Note 1. Use an Antenna Cable to connect the Read/Write Antenna to the Controller. The maximum cable length is 30.5 m. If extending the cable length, connect only one additional cable. (Do not connect more than two cables together.) 2. For details, refer to the User's Manual (Cat. No. Z221). Amplifier Unit Item Model V680-HA63A V680-HA63B Ambient operating temperature -10 to 55C (with no icing) Ambient storage temperature -25 to 65C (with no icing) Ambient operating humidity 35% to 85% (with no condensation) Insulation resistance 20 M min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP40 (IEC60529) (See note 1.) Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each IP67/IP65 (IEC60529) (See note 2.) Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 25 x 40 x 65 mm (not including projections) Material Polycarbonate (PC) resin Weight Approx. 650 g (with 10-m cable) Cable length 5 m, 10 m (See note 3.) Transmittable ID Tags 1-Kbyte memory 2-, 8-, 32-Kbyte memory Note 1. When connected to the V680-HS63-R or V680-HS52-R. 2. When connected to the V680-HS63-W or V680-HS52-W. (Not including the Connector on the Controller.) 3. The maximum extendable cable length is 50 m (including the Amplifier Unit Cable). The maximum number of cables that can be connected is two. 4. For details, refer to the User's Manual (Cat. No. Z248 or Z262). 12 V680 Series RFID System Controller Item Model V680-CA5D01-V2 V680-CA5D02-V2 Power supply voltage Power consumption 24 VDC (-15% to +10%) 15 W max., 0.8 A max. Ambient operating temperature -10 to 55C (with no icing) Ambient operating humidity 25% to 85% (with no condensation) Ambient storage temperature -25 to 65C (with no icing) Ambient storage humidity 25% to 85% (with no condensation) Insulation resistance 20 M min. (at 500 VDC) applied as follows: (1) Between power supply terminals and grounded case (2) Between ground and terminals Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute (1) Between power supply terminals and grounded case (2) Between ground and terminals Degree of protection Panel mounted (equivalent to IP20) Vibration resistance 10 to 150 Hz variable vibration, 0.2-mm double amplitude at 15 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each Shock resistance 150 m/s2 Appearance 105 x 90 x 65 mm (not including projections) Material Polycarbonate (PC) resin, ABS resin Weight Approx. 300 g Mounting method DIN Track or M4 screws Connectable Amplifier Units 1 2 Note: For details, refer to the User's Manual (Cat. No. Z249). Transmission Specifications Item Specifications RS-232C RS-422/RS-485 Connector specifications 9-pin D-Sub connector with threaded socket: 5-pin connector mfd. by Phoenix Contact: M2.6 MC1.5/5GF-3.5 Transmission method Half-duplex serial Transmission speed 9,600/19,200/38,400/115,200 bps Data length 7 or 8 bits Stop bit length 1 or 2 bits Error detection Parity (even/odd/none) Cable length 15 m max. 4-wire/2-wire half-duplex serial 500 m max. Input/Output Specifications Input Specifications (RST, TRG1, TRG2) Input voltage 24 VDC (+10% to -15%, including ripple) (PNP and NPN compatible) Input impedance 2.2 k Input current ON voltage Output Specifications (RUN, BUSY/OUT3, ERROR/OUT4, OUT1, OUT2) 10 mA TYP (24 VDC) Maximum switching capacity 24 VDC (+10% to -15%, including ripple) 100-mA photoMOS output (PNP and NPN compatible) 19 V min. Leakage current 100 A max. OFF voltage 5 V max. Residual voltage 2.0 V max. Input response 70 ms max. Note 1. When RST input is ON, the CPU halts operation and the RST LED lights. The ERROR output is then reset. 2. Short-circuiting in a no-load condition may cause transistor damage. USB Port The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details. When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9. The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/ RS-485C port. System Configuration Connect V680 Read/Write Antennas and Amplifier Units to a V680-series Controller, and read or write data from or to V680-series ID Tags. Transmission is also possible with ID Tags other than those of the V680 Series as long as they comply with ISO/IEC 18000-3 (ISO/IEC 15693). However, transmission with ID Tags other than those of the V680 Series cannot be assured. The user must confirm transmission capabilities carefully prior to use. V680 Series RFID System 13 Performance Specifications ID Tag (1-kbyte Memory) Transmission Recommended combination ID Tag V680-D1KP52MT Function Read/Write Antenna V680-HS52 Transmission distance (unit: mm) Read distance 0 to 9.0 mm (axial deviation 2) Write distance 0 to 8.5 mm (axial deviation 2) ID Tag and Read/Write Antenna mounting conditions V680-D1KP52MT V680-HS52 Non-metallic (Resin, plastic, wood, etc.) Non-metallic V680-D1KP52MT (embedded in metallic surface: steel) V680-HS52 Read distance 0 to 4.5 mm (axial deviation 2) Write distance 0 to 4.0 mm (axial deviation 2) Metallic V680-HS52 V680-D1KP52MT Non-metallic V680-D1KP52MT V680-HS63 Read distance 0 to 12.0 mm (axial deviation 2) Write distance 0 to 9.5 mm (axial deviation 2) Read distance 0 to 17.0 mm (axial deviation 2) (See note.) Write distance 0 to 17.0 mm (axial deviation 2) (See note.) V680-HS63 Non-metallic (Resin, plastic, wood, etc.) V680D1KP52MT Non-metallic V680-D1KP66T V680-HS52 V680-D1KP66T V680-HS52 Non-metallic (Resin, plastic, wood, etc.) Non-metallic V680-HS63 Read distance 0 to 30.0 mm (axial deviation 10) (See note.) Write distance 0 to 25.0 mm (axial deviation 10) (See note.) Read distance 0 to 47.0 mm (axial deviation 10) (See note.) Write distance 0 to 42.0 mm (axial deviation 10) V680-HS63 Non-metallic (Resin, plastic, wood, etc.) V680D1KP66T Non-metallic V680-HS65 V680-HS65 Non-metallic (Resin, plastic, wood, etc.) Metallic 14 V680 Series RFID System V680D1KP66T Recommended combination ID Tag V680-D1KP66MT (flush-mounted on metallic surface: steel) Function Read/Write Antenna V680-HS52 Transmission distance (unit: mm) Read distance 0 to 16.0 mm (axial deviation 2) Write distance 0 to 14.0 mm (axial deviation 2) ID Tag and Read/Write Antenna mounting conditions V680-D1KP66MT V680-HS52 Non-metallic V680-HS63 Read distance 0 to 25.0 mm (axial deviation 10) Write distance 0 to 20.0 mm (axial deviation 10) Read distance 0 to 25.0 mm (axial deviation 10) Metallic V680-HS63 Metallic V680D1KP66MT Non-metallic V680-HS65 V680-HS65 Metallic Write distance 0 to 20.0 mm (axial deviation 10) Metallic V680-D1KP58HT V680-H01 Read distance 0 to 150 mm (See note.) V680-H01 V680D1KP66MT V680-D1KP58HT Write distance Non-metallic (Resin, plastic, wood, etc.) Nonmetallic Note: The transmission distance may be reduced if the V680-D1KP66T or V680-D1KP58HT is mounted onto a metallic surface. Refer to the User's Manual (V680-D1KP@@: Cat. No. Z262, V680-D1KP58HT: Cat. No. Z221) for details. V680 Series RFID System 15 ID Tag (2-kbyte Memory) Transmission Recommended combination ID Tag V680-D2KF52M Function Read/Write Antenna V680-HS52 Transmission distance (unit: mm) Read distance 0 to 8.0 mm (axial deviation 2) Write distance 0 to 8.0 mm (axial deviation 2) ID Tag and Read/Write Antenna mounting conditions V680-D2KF52M V680-HS52 Non-metallic (Resin, plastic, wood, etc.) Non-metallic V680-D2KF52M (embedded in metallic surface: steel) V680-HS52 Read distance 0 to 3.0 mm (axial deviation 2) Write distance 0 to 3.0 mm (axial deviation 2) Metallic V680-HS52 Non-metallic V680-D2KF52M V680-HS63 Read distance 0 to 9.5 mm (axial deviation 2) Write distance 0 to 9.5 mm (axial deviation 2) Read distance 0 to 17.0 mm (axial deviation 2) (See note.) Write distance 0 to 17.0 mm (axial deviation 2) (See note.) V680-D2KF52M V680-HS63 Non-metallic (Resin, plastic, wood, etc.) V680D2KF52M Non-metallic V680-D2KF67 V680-HS52 V680-D2KF67 V680-HS52 V680-HS63 Read distance 7 to 30.0 mm (axial deviation 10) (See note.) Write distance 7 to 30.0 mm (axial deviation 10) (See note.) Read distance 0 to 42.0 mm (axial deviation 10) (See note.) Write distance 0 to 42.0 mm (axial deviation 10) (See note.) Read distance 0 to 16.0 mm (axial deviation 2) Non-metallic (Resin, plastic, wood, etc.) Non-metallic V680-HS63 Non-metallic (Resin, plastic, wood, etc.) V680D2KF67 Non-metallic V680-HS65 V680-HS65 Non-metallic (Resin, plastic, wood, etc.) V680D2KF67 Metallic V680-D2KF67M (flush- V680-HS52 mounted on metallic surface: steel) Write distance 0 to 16.0 mm (axial deviation 2) Read distance 6 to 25.0 mm (axial deviation 10) Write distance 6 to 25.0 mm (axial deviation 10) Read distance 0 to 25.0 mm (axial deviation 10) Write distance 0 to 25.0 mm (axial deviation 10) V680-D2KF67M Metallic V680-HS52 Non-metallic V680-HS63 Iron V680-HS63 Metallic V680D2KF67M Non-metallic V680-HS65 V680-HS65 Metallic V680D2KF67M Metallic 16 V680 Series RFID System ID Tag (8-/32-Kbyte Memory) Transmission Recommended combination ID Tag Read/Write Antenna V680-D8KF68/ -D32KF68 V680-HS63 Function Transmission distance ID Tag and Read/Write Antenna mounting conditions (unit: mm) Read distance 0 to 45.0 mm (axial deviation 10) (See note.) Write distance 0 to 45.0 mm (axial deviation 10) (See note.) V680-HS63 Non-metallic (Resin, plastic, wood, etc.) V680D@KF68 Metallic V680-HS65 Read distance 0 to 75.0 mm (axial deviation 10) (See note.) Write distance 0 to 75.0 mm (axial deviation 10) (See note.) Read distance 0 to 35.0 mm (axial deviation 10) Write distance 0 to 35.0 mm (axial deviation 10) V680-HS65 Non-metallic (Resin, plastic, wood, etc.) V680D@KF68 Metallic V680-D8KF68/ V680-HS63 -D32KF68 (Special attachment provided; flush-mounted on metallic surface: steel) V680-A81 (ID Tag Attachment) V680-HS63 Metallic V680D@KF68 Metallic V680-HS65 Read distance 0 to 55.0 mm (axial deviation 10) V680-HS65 V680-A81 (ID Tag Attachment) Metallic Write distance 0 to 55.0 mm (axial deviation 10) V680D@KF68 Metallic Note: The transmission distance may be reduced if the V680-D@KF68 is mounted onto a metallic surface. Refer to the User's Manual (Cat. No. Z248) for details. Characteristic Data (Typical) Transmission Range (unit: mm) 1-kbyte Memory ID Tag V680-HS52 & V680-D1KP52MT V680-HS52 & V680-D1KP52MT (embedded in metallic surface: steel) Write Read Y Y 50 40 X 30 -40 -30 -20 -10 Y 50 40 -50 Write Read Y X 30 20 20 10 10 0 10 20 30 40 X -50 -40 -30 -20 -10 0 10 20 30 V680 Series RFID System 40 X 17 V680-HS63 & V680-D1KP52MT V680-HS52 & V680-D1KP66T Y Y Y 50 40 -30 -20 20 20 10 10 -10 0 10 20 30 40 -50 X V680-HS63 & V680-D1KP66T -40 -30 -20 -10 Y 20 40 10 20 0 10 20 30 X 40 -100 -80 -60 -40 -20 40 Write 60 X 80 Write Read Y Y 50 40 40 X 30 -10 20 Y 50 -20 0 V680-HS63 & V680-D1KP66MT (flush-mounted on metallic surface: steel) Read -30 Write 60 Y -40 X 80 V680-HS52 & V680-D1KP66MT (flush-mounted on metallic surface: steel) -50 40 100 X 30 -10 30 Read 40 -20 20 Y 50 -30 10 Write Read -40 0 V680-HS65 & V680-D1KP66T Y -50 X 30 X 30 -40 Y 50 40 -50 Write Read Write Read 20 20 10 10 0 10 20 30 X 30 40 -50 X V680-HS65 & V680-D1K66MT (flush-mounted on metallic surface: steel) -40 -30 -20 -10 0 10 20 30 40 X V680-H01 & V680-D1KP58HT Read Write Read Write Y Y 100 200 Y 80 150 Tag 60 X V680-H01 100 40 50 20 -100 18 -80 -60 -40 -20 0 20 40 60 V680 Series RFID System 80 X -250 -200 -150 -100 -50 0 50 100 150 200 X 2-kbyte Memory ID Tag V680-HS52 & V680-D2KF52M V680-HS52 & V680-D2KF52M (embedded in metallic surface: steel) Write Read Y 60 60 Y 50 -50 -40 -30 -20 40 X 30 30 20 20 10 10 -10 Y 50 40 -70 -60 0 10 20 30 40 50 60 X V680-HS63 & V680-D2KF52M -70 -60 -50 -40 -30 -20 X -10 0 10 20 30 40 60 Y 50 Y 40 X X 30 30 20 20 10 10 -10 Write 50 40 -20 X Y 60 -30 60 Read Write Read -40 50 V680-HS52 & V680-D2KF67 Y -70 -60 -50 Write Read Y 0 10 20 30 40 50 60 X V680-HS63 & V680-D2KF67 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 X V680-HS65 & V680-D2KF67 Y 90 Y 60 Write Read Write Read Y 80 50 70 60 40 X 50 30 40 20 30 20 10 -70 -60 -50 -40 -30 -20 -10 10 0 10 20 30 40 50 60 X V680-HS52 & V680-D2KF67M (flush-mounted on metallic surface: steel) -100 -80 -60 -20 -40 -20 -10 Write Y 60 Y 50 40 -30 X 80 Read 50 -40 60 Y 60 -50 40 Write Read Y -70 -60 20 0 V680-HS63 & V680-D2KF67M (flush-mounted on metallic surface: steel) 40 X 30 30 20 20 10 10 0 10 20 30 40 50 60 X -70 -60 -50 -40 -30 -20 -10 X 0 10 20 30 40 50 60 X V680-HS65 & V680-D2KF67M (flush-mounted on metallic surface: steel) Read Write Y 90 80 70 60 50 40 30 20 10 -100 -80 -60 -40 -20 0 20 40 60 80 X V680 Series RFID System 19 8-/32-Kbyte Memory ID Tag V680-HS63 & V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag) V680-HS63 & V680-D8KF68/-D32KF68 (Vertical-facing ID Tag) Write Read Y 70 Y 60 50 X 40 40 30 30 20 20 10 0 10 20 30 40 50 60 70 X -80 -70 -60 -50 -40 -30 -20 -10 30 30 20 20 10 10 0 10 20 30 40 50 60 70 X 20 -40 -20 0 X Write Y -30 -20 -10 40 60 80 100 120 X -120 -100 30 40 50 60 70 X 60 80 -80 -60 -40 -20 V680 Series RFID System 0 Y X 20 40 60 Write 100 80 100 Read Y 110 100 90 80 70 60 50 40 30 20 10 120 X Write 120 X V680-HS65 & V680-D8KF68/-D32KF68 Flush-mounted on metallic surface: steel (Vertical-facing ID Tag) When the V680-A81 ID Tag Attachment is mounted. X 40 20 Read Y 20 10 Y 110 100 90 80 70 60 50 40 30 20 10 X 20 0 Write Read -60 -80 -70 -60 -50 -40 Y Y 110 100 90 80 70 60 50 40 30 20 10 -80 70 V680-HS65 & V680-D8KF68/-D32KF68 (Vertical-facing ID Tag) V680-HS65 & V680-D8KF68/-D32KF68 Flush-mounted on metallic surface: steel (Horizontalfacing ID Tag) When the V680-A81 ID Tag Attachment is mounted. -120 -100 60 X 40 0 50 50 X 40 Read -20 40 60 Y 110 100 90 80 70 60 50 40 30 20 10 -40 30 Read V680-HS65 & V680-D8KF68/-D32KF68 (Horizontal-facing ID Tag) -60 20 Y 70 Y 50 -80 10 V680-HS63 & V680-D8KF68/-D32KF68 Flush-mounted on metallic surface: steel (Vertical-facing ID Tag) When the V680-A81 ID Tag Attachment is mounted. 60 -120 -100 0 Write Read Y 70 -40 -30 -20 -10 X 10 V680-HS63 & V680-D8KF68/-D32KF68 Flush-mounted on metallic surface: steel (Horizontalfacing ID Tag) When the V680-A81 ID Tag Attachment is mounted. -80 -70 -60 -50 Y 60 50 -80 -70 -60 -50 -40 -30 -20 -10 Write Read Y 70 -120 -100 -80 -60 -40 -20 0 Write Y X 20 40 60 80 100 120 X TAT and Communications Time (Reference) Communications Time 1-Kbyte Memory ID Tag Transmission speed: Normal mode Transmission speed: High-speed mode Transmission time (ms) Transmission time (ms) V680-D1KP@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63A Amplifier Unit) V680-D1KP58HT (used in combination with the V680-H01 Read/Write Antenna) 2,500 2,000 Write (verify enabled) Write (verify disabled) 1,500 2,000 Controller transmission speed setting 1,800 1,600 1,400 Write (verify disabled) 1,200 High-speed mode (See notes 1 and 2.) 600 400 Read Read 200 0 Normal mode Read 200 400 600 800 1,000 1,200 0 Transmission time (ms) N = Number of processing bytes --- T = 1.3N + 31 Write Enabled T = 2.1N + 58 Disabled T = 1.8N + 56 Read --- T = 1.0N + 29 Write Enabled T = 1.8N + 51 Disabled T = 1.5N + 47 800 500 Write verification setting Write (verify enabled) 1,000 1,000 Command 200 400 600 800 1,000 Bytes 1,200 Bytes Note 1. The V680-H01 Read/Write Antenna cannot be used in high-speed mode. 2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode. 2-Kbyte Memory ID Tag V680-D2KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit) Transmission speed: High-speed mode 5,000 4,500 4,000 3,500 Write (verify enabled) 3,000 Write (verify disabled) 2,500 Transmission time (ms) Transmission time (ms) Transmission speed: Normal mode 4,000 Controller transmission speed setting 3,500 3,000 Normal mode Write (verify disabled) 1,500 Read 1,500 High-speed mode (See note.) Read 1,000 1,000 Transmission time (ms) N = Number of processing bytes Read --- T = 1.2N + 30 Write Enabled T = 2.4N + 49 Disabled T = 1.2N + 49 Read --- T = 0.9N + 27 Write Enabled T = 1.7N + 49 Disabled T = 0.9N + 41 500 500 0 Write verification setting Write (verify enabled) 2,500 2,000 2,000 Command 500 1,000 1,500 2,000 2,500 0 500 1,000 1,500 2,000 2,500 Bytes Bytes Note: When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode. 8-/32-Kbyte Memory ID Tag Transmission speed: Normal mode Transmission speed: High-speed mode Transmission time (ms) Transmission time (ms) V680-D8KF@@, V680-D32KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit) 3,500 Write (verify disabled) 3,000 Write (verify enabled) 2,500 2,000 Read 1,500 2,500 Controller transmission speed setting 2,000 Write (verify enabled) Command Normal mode Read Write (verify disabled) 1,500 1,000 Read 1,000 High-speed mode (See note.) Write verification setting Transmission time (ms) N = Number of processing bytes --- T = 1.3N + 30 Write Enabled T = 1.6N + 59 Disabled T = 1.3N + 50 Read --- T = 0.8N + 25 Write Enabled T = 0.9N + 40 Disabled T = 1.1N + 41 500 500 0 500 1,000 1,500 2,000 2,500 Bytes 0 500 1,000 1,500 2,000 Note: When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission 2,500 speed is set to high-speed mode. Bytes V680 Series RFID System 21 TAT (Reference) TAT (Turn Around Time) TAT refers to the total time required from the point at which a host device (such as a personal computer) starts sending a command until a response is received. TAT = Command send time + ID Tag transmission time + response receipt time Command send time: This is the time required for sending a command from the host device to the Controller. It varies depending on the communications speed and format. ID Tag transmission time: This is the time required for transmission between the Read/Write Antenna and the ID Tag. Response receipt time: For an ordinary command (Command) RDA1 * * * * *CR This is the time required for returning a response from the Controller to the host device. It varies depending on the communications speed and format. ID Tag transmission time RD001234 * * * *CR Response TAT 1-Kbyte Memory ID Tag V680-D1KP@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63A Amplifier Unit) V680-D1KP58HT (used in combination with the V680-H01 Read/Write Antenna) Controller transmission speed setting Normal mode Command Read Write Write verification setting --- Enabled Disabled High-speed mode (See notes 2 and 3.) Read Write --- Enabled Disabled Number of bytes to processed (byte) TAT (ms) (See note 1.) 100 173 256 389 512 747 1,000 1,431 100 280 256 621 512 1,184 1,000 2,258 100 248 256 542 512 1,028 1,000 1,956 100 141 256 310 512 591 1,000 1,129 100 243 256 537 512 1,023 1,000 1,951 100 209 256 456 512 865 1,000 1,647 Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the User's Manual. 2. The V680-H01 Read/Write Antenna cannot be used in high-speed mode. 3. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode. 4. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows: Data length: 8 bits, Stop bits: 1, Parity: Odd. In this example, communications are continuous, with no gaps between characters. 5. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code. 22 V680 Series RFID System 2-Kbyte Memory ID Tag V680-D2KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit) Controller transmission speed setting Normal mode Command Read Write Write verification setting --- Enabled Disabled High-speed mode (See note 2.) Read Write --- Enabled Disabled Number of bytes to processed (byte) TAT (ms) (See note 1.) 100 162 256 363 512 695 1,000 1,330 2,000 2,620 100 301 256 689 512 1,328 1,000 2,549 2,000 5,039 100 181 256 382 512 714 1,000 1,349 2,000 2,639 100 132 256 286 512 541 1,000 1,030 2,000 2,020 100 231 256 510 512 970 1,000 1,849 2,000 3,639 100 143 256 297 512 552 1,000 1,041 2,000 2,031 Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the User's Manual. 2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode. 3. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows: Data length: 8 bits, Stop bits: 1, Parity: Odd. In this example, communications are continuous, with no gaps between characters. 4. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code. V680 Series RFID System 23 8-/32-Kbyte Memory ID Tag V680-D8KF@@, V680-D32KF@@ (used in combination with the V680-HS@@ Read/Write Antenna and V680-HA63B Amplifier Unit) Controller transmission speed setting Normal mode Command Read Write Write verification setting --- Yes No High-speed mode (See note 2.) Read Write --- Yes No Number of bytes to processed (byte) TAT (ms) (See note 1.) 100 172 256 388 512 746 1,000 1,430 2,000 2,820 100 231 256 494 512 929 1,000 1,759 2,000 3,449 100 192 256 408 512 766 1,000 1,450 2,000 2,840 100 117 256 255 512 485 1,000 925 2,000 1,815 100 163 256 348 512 655 1,000 1,241 2,000 2,431 100 142 256 296 512 551 1,000 1,040 2,000 2,030 Note 1. These are the TAT values for a baud rate of 115,200 bps. For information on the TAT for baud rates other than 115,200 bps, refer to the User's Manual. 2. When multi-access or FIFO is selected as the transmission option, the transmission time will be the same as in normal mode even when the transmission speed is set to high-speed mode. 3. The value given for TAT data assumes that communications settings for the V680-CA5D01/02-V2 ID Controller are as follows: Data length: 8 bits, Stop bits: 1, Parity: Odd. In this example, communications are continuous, with no gaps between characters. 4. The number of bytes of TAT data is the number of bytes when ASCII is specified as the code. 24 V680 Series RFID System Safety Precautions Precautions for Correct Use WARNING Do not use this product as a detection device to protect people. Please observe the following precautions to prevent failure to operate, malfunctions, or undesirable effects on product performance. Installation Site Note: This catalog is intended only to help select the appropriate product. Be sure to read the User's Manual for usage precautions prior to using the product. Precautions for Safe Use Install the product at a location where: * It is not exposed to corrosive gases, dust, metal chips, or salt. * The ambient operating temperature is within the range stipulated in the specifications. To ensure safety, be sure to follow the following precautions: * There are no sudden variations in temperature (no condensation). 1. Do not operate this product in any flammable, explosive, or corrosive gas environment. 2. Do not disassemble, repair, or remodel this product. 3. Tighten the base lock screws and terminal block screws completely. 4. Be sure to use wiring crimp terminals of the specified size. 5. If any cable has a locking mechanism, be sure to check that it has been locked before using it. 6. The DC power supply must be within the specified rating (24 VDC +10%/-15%). 7. Do not reverse the power supply connection. 8. Do not insert water, wire, etc., into any of the gaps in the case. Doing so may cause fire or electric shock. 9. Turn OFF the Controller power before attaching or removing the Read/Write Antenna. 10.In the event that the product exhibits any abnormal condition, immediately stop using the system, turn OFF the power, and contact your OMRON sales representative. 11.Dispose of this product as industrial waste. 12.Be sure to follow any other warnings, cautions, and notices given in this document. * The ambient operating humidity is within the range stipulated in the specifications. * No vibration or shock exceeding the values stipulated in the specifications is transmitted directly to the body of the product. * It is not subject to splashing water, oil, or chemical substances. Installation * The product uses the 13.56-MHz frequency band to communicate with ID Tags. Some devices, such as some motors, inverters, and switching power supplies, generate electromagnetic waves (i.e., noise) that can affect communications with ID Tags. If any of these devices are nearby, communications with ID Tags may be affected or ID Tags may be destroyed. If the product is to be used near such devices, check the effects on communications before using the product. * To minimize the general influence of noise, observe the following precautions: 1. Ground any metallic material located around this device to 100 or less. 2. Keep the product away from high voltage and heavy current. * Do not use products that are not waterproof in misty environments. * Do not subject the products to chemicals that adversely affect product materials. * When installing the product, tighten screws to the following torque: Controller: 1.2 N*m max. V680-HS63 Read/Write Antenna: 1.2 N*m V680-HS52 Read/Write Antenna: 40 N*m V680-HS65 Read/Write Antenna: 1.2 N*m * When Read/Write Antennas are mounted side-by-side, mutual interference may reduce the transmission performance. Refer to the RFID System Amplifier and Antennas/ID Tags User's Manual to mount them in a way that will prevent mutual interference. Storage Store the product at a location where: * It is not exposed to corrosive gases, dust, metal chips, or salt. * The ambient storage temperature is within the range stipulated in the specifications. * There are no sudden variations in temperature (no condensation). * The ambient storage humidity is within the range stipulated in the specifications. * No vibration or shock exceeding the values stipulated in the specifications is transmitted directly to the body of the product. * It is not subject to splashing water, oil, or chemical substances. Cleaning Do not use thinner, benzene, acetone, or kerosene for cleaning. Using these substances may dissolve the resin material and the case. V680 Series RFID System 25 Dimensions Note: All units are in millimeters unless otherwise indicated. ID Tag V680-D1KP52MT R0.2 0 8 -0.1 dia. Case material PPS resin Filling 0 5 -0.1 V680-D1KP66T/-D1KP66MT Mounting Hole Dimensions 4-R4 34 Epoxy resin 25 0.2 4-R3 2-M3 25 0.2 32 Two, 3.5 dia. Two, 6 dia. 32 34 25 0.2 25 0.2 3.5 0.1 Case material PPS resin V680-D2KF52M R0.2 0 8 -0.1 dia. Case material PPS resin Filling 0 5 -0.1 V680-D2KF67/-D2KF67M Epoxy resin 8 0.2 Mounting Hole Dimensions 5.2 8 13.2 2-M3 5.2 8 13.2 16 40 +0.1 -0.5 32 0.2 Mounting reference surface 16 8 Two, 3.5-dia. mounting holes 16 16 32 0.2 2 4.5 40 +0.1 -0.5 Case material ABS resin Filling Epoxy resin V680-D8KF68/-D32KF68 5 Two, 4.5 dia. mounting holes 10 10 Mounting Hole Dimensions 10 54 440.2 44 2-M4 760.2 76 86 Case material PBT resin Filling 26 V680 Series RFID System Epoxy resin V680-D1KP58HT 60 dia. 80 dia. 100.2 5 5 14 dia. 2-R2 Read/Write Antenna with Detachable Amplifier Unit V680-HS52-W Two toothed washers Two mounting nuts M22 x 1 Operation indicator Insulated cover 35 dia. 30 37 50 14.5 dia. 19.8 dia. 16.5 dia. 16.5 dia. 7 30 47.6 50 Mounting Hole Dimensions Connector 5.5-dia. coaxial cable 57 65 Ferrite core Case material 22.5 dia. Brass Transmission surface PBT resin Filling Epoxy resin Cable PVC Cable length 2M/12.5M V680-HS52-R Two toothed washers Two mounting nuts M22 x 1 Operation indicator 35 dia. Insulated cover 30 50 20 10 14.5 dia. 19.8 dia. 16.5 dia. 16.5 dia. 7 47.6 50 30 Mounting Hole Dimensions 22.5 dia. 57 65 Connector 5.3-dia. coaxial cable Ferrite core Case material Brass Transmission surface PBT resin Filling Epoxy resin Cable PVC Cable length 2M/12.5M V680 Series RFID System 27 V680-HS63-W Insulated cover 30 37 50 40 280.1 14.5 dia. 5 16.5 dia. 27 5 16.5 dia. 6 53 Connector 5.5-dia. coaxial cable Ferrite core Operation indicator Mounting Hole Dimensions 2-M4 or 4.5 dia. Center of coil 23 11 Case material ABS resin Filling Epoxy resin Cable PVC Cable length 2M/12.5M V680-HS63-R Insulated cover 30 50 20 10 40 14.5 dia. 280.1 5 16.5 dia. 27 5 16.5 dia. 6 53 Connector 5.3-dia. coaxial cable Ferrite core Operation indicator Mounting Hole Dimensions 11 28 V680 Series RFID System 2-M4 or 4.5 dia. Center of coil 23 Case material ABS resin Filling Epoxy resin Cable PVC Cable length 2M/12.5M V680-HS65-W 100 Four, 4.5-dia. (Mounting holes) 900.2 5 50 5 Ferrite core Connector Operation indicator 37 50 25 100 900.2 14.5 dia. 16.8 dia. Bushing 16.5 dia. 30 50 10 Insulated cover 5.5-dia. coaxial cable 10 14 Case material ABS resin 30 20 11 Filling Epoxy resin Cable PVC (gray) Cable length 2M/12.5M V680-HS65-R 100 900.2 5 Four, 4.5-dia. (Mounting holes) 50 5 Ferrite core Connector Operation indicator (39.5) 50 25 100 900.2 14.5 dia. 16.8 dia. Bushing 16.5 dia. 30 50 10 Insulated cover 5.3-dia. coaxial cable 10 14 Case material ABS resin 30 20 11 Filling Epoxy resin Cable PVC (black) Cable length 2M/12.5M V680 Series RFID System 29 Read/Write Antenna with Built-in Amplifier Unit V680-H01 FCC label Four bushings and screws Four, 5 dia. mounting holes 20-mm max. 500 Vinyl-insulated, round cable, 5.8 dia., with 10 conductors Standard length: 0.5 m 20-mm max. 200 185 Connector cable Connector Ferrite core 78.8 Mounting Hole Dimensions Coil core 4-R8 142.5 235 250 85 7.5 Four, M4 or 4.5 dia. Power supply (green)/ communications (orange) 1850.2 indicator 142.5 2350.2 40 21 13.5 Case material PC/ASA resin 30 V680 Series RFID System Filling Aluminum Cable PVC Amplifier Unit V680-HA63A/-HA63B Operation indicator 13.7 65 18 51 12.8 dia. 36 9.5 dia. 15 dia. 40 25 25 Connector 35.6 15 25 3.5 Connector Vinyl-insulated, shielded, round cable, 5.8 dia. (2 conductors: 41/0.16 dia., 8 conductors: 17/0.08 dia.) Case material PC resin Filling Epoxy resin Cable PVC Cable length 5M/10M ID Controller V680-CA5D01-V2/-CA5D02-V2 Mounting Hole Dimensions 2-M4 65 (80) 800.2 105 Two, 4.5-dia. mounting holes 5 950.2 95 18 90 80 17.5 5 7.5 V680 Series RFID System 31 Accessory V680-D1KP66T Attachments V600-A86 Holder 4-R5.5 37 34 250.2 Mounting Hole Dimensions Two, 4-dia. 2-M3 250.2 15 25 0.2 16 25 0.2 15 4 3.5 34 10 Case material PPS resin 37 V680-D8KF68/-D32KF68 Attachments V600-A81 Holder 10 Mounting holes Two, 4.5-dia. Mounting Hole Dimensions 54 440.2 44 2-M4 760.2 76 86 Case material PBT resin Filling Epoxy resin V680-D1KP58HT Attachments V680-A80 17 20 dia. Mounting Hole Dimensions 12 dia. M12 M12 3.2 dia. 11.5 15 50 40 110 V680-H01 Special Cables V700-A40-W 2M V700-A40-W 5M V700-A40-W 10M V700-A40-W 20M V700-A40-W 30M 41.8 L1100 (See note.) 49 20 dia. 15.5 dia. Connector to ID Controller Connector to R/W Head Vinyl-insulated, round cable, 6 dia. Connection label Note: The model numbers for each length (L1) are as follows: Model Length L1 V700-A40-W 2M V700-A40-W 5M 5,000 V700-A40-W 10M 10,000 V700-A40-W 20M 20,000 V700-A40-W 30M 30,000 Material 32 V680 Series RFID System 2,000 PVC READ AND UNDERSTAND THIS DOCUMENT Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments. WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. SUITABILITY FOR USE THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate catalogs for OMRON's safety rated products. OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the product. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: * Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. * Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. * Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PERFORMANCE DATA Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. COPYRIGHT AND COPY PERMISSION This document shall not be copied for sales or promotions without permission. This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. Q151-E1-03 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Regional Headquarters Industrial Automation Company OMRON EUROPE B.V. Sensor Business Unit Carl-Benz-Str. 4, D-71154 Nufringen, Germany Tel: (49) 7032-811-0/Fax: (49) 7032-811-199 Sensing Devices Division H.Q. Industrial Sensors Division Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel: (81)75-344-7022/Fax: (81)75-344-7107 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, Pu Dong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 Printed in Japan 0907-0.11M (1106) (M) Cat. No. Q151-E1-03 OMRON Corporation 2007. 11 In the interest of product improvement, specifications are subject to change without notice. Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.