New Product New Introduction Product Introduction NEW! PAN1311/1321 BLUETOOTH(R) RF MODULES Wireless Bluetooth(R) Connectivity Featuring Serial Port Profile (SPP) Rely on Panasonic for the latest breakthrough technologies in Bluetooth RF Module based wireless networking! Introducing the New PAN1311/1321 Series. This newest Series of Bluetooth RF Modules is a highly integrated, cost engineered solution for Bluetooth applications using Serial Port Profile (SPP). The PAN1311/1321 Series is a full Bluetooth system solution, with an integrated controller and antenna, Bluetooth transceiver, SPP Profile, FCC and Bluetooth product certifications. P Using Panasonic's exclusive "tiny footprint" technology, incorporating i a Surface Mount Device (SMD) Land Grid Array (LGA) package, the Cut the Cable PAN1311/1321 Series is just 15.6 mm by 8.7 mm! A fully shielded case protects the transceiver from nearby RF emitters, simplifying PCB layout. Bluetooth-Module PAN1450 The PAN1311/1321 is qualified to the Bluetooth 2.0 standard. PAN1311/1321 is perfect for all applications migrating from USB or RS232 to wireless. The integrated Bluetooth SPP is easily accessed using a simple AT command set. Evaluation and Development Kits are available. These modules are FCC and Bluetooth certified and comply with the national and international regulations, such as ETSI EN300328 and IC. Description ENW-89810K5CF PAN1311, Bluetooth Module v 2.0, EDR, SPP EVAL_PAN1311 PAN1311 Evaluation kit Radio Features - High sensitivity design (-86 dBm typ.) - Integrated RF shield - Class 2 module (0dBm typ. output power) - One antenna port BLUET ODULES User Interfaces - Full-speed USB version 2.0 compliant - Programmable baud rate UART (9,6 Kbps - 921,6 Kbps) - Debug UART (DUART) - 16 General Purpose I/O`s (interruptible) - PCM audio (1 channel) - SPI and JTAG interface TH QUAL OO B01839 PR ED Part Numbers Overview - Inquiry results with RSSI (1.2) - Adaptive frequency hopping (AFH) enabled (1.2) - High throughput (>600 kbps) - Hold-, Park- and Sniffmode - Up to 128 bit encryption - Audio capability on an SCO channel - Support for very low power modes - sleep and deep sleep - All bluetooth data rates (up to 57,6/723,2Kbps) IF I PAN1311 Part Numbers: OUTLINES - ENW89803J The PAN1450 provides wireless interface per the BT 1.2 specification. Interoperability and BT compliance testing have been completed for the BT Chip ZV4301 from Zeevo, Inc. to facilate rapid time-to-market. TM The BT Chip incorporates a widely popular 32-bit ARM7TDMI CPU core with sufficient bandwidth to support a wide range of embedded Controller applications and the module provides full ARM7 software development access. The PAN1450 is manufactured in a 13,4 x 18,7 x 2,2 mm SMD package and the only external component needed is an 50 ohm antenna. Any customizations for the software can be handled with our recommended partners. * On-module voltage regulator. External supply 2.7-3.6V FEATURES * Integrates ARM7TDMI, RAM and patchable 256k EEPROM (for device configuration data and application) * Based upon Infineon's PMB8753/2 * Reference clock included * Low power clock from internal oscillator or external low power clock M Supported Profiles: RFCOMM, SPP device A and B Complete Bluetooth 2.0 + EDR solution Dimensions PAN1311: 11.6 x 8.7 x 1.8 mm3 Dimensions PAN1321: 15.6 x 8.7 x 2.8 mm3 Ultra low power design Certifications: Bluetooth and FCC No external components needed Operating Temperature Range: -40C to +85C IRELESS * * * * * * * * W Product Performance: TM ODUCT Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1450 Rev. A PAN1321 Part Numbers: Part Numbers Description ENW-89811K4CF PAN1321, Bluetooth Module v 2.0, EDR, SPP, with antenna EVAL_PAN1321 PAN1321 Evaluation kit www.panasonic.com/rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 Copyright (c) 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. Rev 1.0 PAN1311-1321NPI, FY10-072-XXX New Product New Introduction Product Introduction Block Diagram PAN1311: Interfaces: The PAN1311/PAN1321 Serial Port Profile Interface supports: * 3.25 MBuad UART * General purpose I/Os with interrupt and wake-up capabilities * JTAG for boundary scan and debug Applications: All Wireless Applications * Printer Adapter and Scanners * Printers * Access Points * Wireless Sensors * Cable Replacement * Personal Digital Assistants (PDAs) * PC Motherboards & Peripherals * Industrial Applications Block Diagram PAN1321: Also Available! Evaluation Kits Technical Specifications for PAN1311 and PAN1321: Parameter Receiver Sensitivity (BER=10-3) Value -86 dBm Condition / Notes Ideal signal Output Power +3 dBm @ 50 Ohm antenna pin Power Supply 2.7 - 3.6 V Single operation voltage Ultra Low Power Scan 80 uA T = 25C ACL (Transmit 3-DH1) 40 mA Enhanced Data Rate, 531.2 kb/s (1) ACL (Receive 3-DH1) 37 mA Enhanced Data Rate, 531.2 kb/s (1) Operating Temperature Range -40C to + 85C (1) Figure indicates maximum possible data rate with this packet type. Total throughput depends on application and interface setting. www.panasonic.com/rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 Copyright (c) 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. Rev 1.0 PAN1311-1321NPI, FY10-072-XXX