Rely on Panasonic for the latest breakthrough technologies in Bluetooth RF
Module based wireless networking! Introducing the New PAN1311/1321
Series. This newest Series of Bluetooth RF Modules is a highly
integrated, cost engineered solution for Bluetooth applications using
Serial Port Profile (SPP). The PAN1311/1321 Series is a full Bluetooth
system solution, with an integrated controller and antenna, Bluetooth
transceiver, SPP Profile, FCC and Bluetooth product certifications.
Using Panasonic’s exclusive “tiny footprint” technology, incorporating
a Surface Mount Device (SMD) Land Grid Array (LGA) package, the
PAN1311/1321 Series is just 15.6 mm by 8.7 mm! A fully shielded case
protects the transceiver from nearby RF emitters, simplifying PCB layout.
The PAN1311/1321 is qualified to the Bluetooth 2.0 standard.
PAN1311/1321 is perfect for all applications migrating from USB or
RS232 to wireless. The integrated Bluetooth SPP is easily accessed
using a simple AT command set. Evaluation and Development Kits are
available. These modules are FCC and Bluetooth certified and comply
with the national and international regulations, such as ETSI EN300328
and IC.
Product Performance:
• SupportedProles:RFCOMM,SPPdeviceAandB
• CompleteBluetooth2.0+EDRsolution
• DimensionsPAN1311:11.6 x 8.7 x 1.8 mm3
• DimensionsPAN1321:15.6 x 8.7 x 2.8 mm3
• Ultralowpowerdesign
• Certications:BluetoothandFCC
• Noexternalcomponentsneeded
• OperatingTemperatureRange:-40ºCto+85ºC
• On-modulevoltageregulator.Externalsupply2.7-3.6V
• IntegratesARM7TDMI,RAMandpatchable256k
EEPROM(fordevicecongurationdataand
application)
• BaseduponInfineon’s PMB8753/2
• Referenceclockincluded
• Lowpowerclockfrominternaloscillatororexternal
low power clock
PAN1311 Part Numbers:
Part Numbers Description
ENW-89810K5CF PAN1311, Bluetooth Module v 2.0, EDR, SPP
EVAL_PAN1311 PAN1311 Evaluation kit
PAN1321 Part Numbers:
Part Numbers Description
ENW-89811K4CF PAN1321, Bluetooth Module v 2.0, EDR, SPP, with antenna
EVAL_PAN1321 PAN1321 Evaluation kit
New
Product
Introduction
Copyright © 2011 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
Rev 1.0 PAN1311-1321NPI,FY10-072-XXX
www.panasonic.com/rfmodules
piccomponentsmarketing@us.panasonic.com
1-800-344-2112
New
Product
Introduction
NEW! PAN1311/1321 BLUETOOTH® RF MODULES
Wireless Bluetooth® Connectivity Featuring Serial Port Profile (SPP)
P
i
Design and Specications are subject to change without notice. Ask the factory for technical specications before purchase and/or use. If there is any doubt
regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1450 Rev. A
WIRELESS
MODULES
The PAN1450 provides wireless interface per the BT 1.2
specication. Interoperability and BT compliance testing have
been completed for the BT Chip ZV4301 from Zeevo, Inc. to
facilate rapid time-to-market.
The BT Chip incorporates a widely popular 32-bit ARM7TDMITM
CPU core with sufcient bandwidth to support a wide range of
embedded µController applications and the module provides
full ARM7 software development access.
The PAN1450 is manufactured in a 13,4 x 18,7 x 2,2 mm³
SMD package and the only external component needed is an
50 ohm antenna.
Any customizations for the software can be handled
with our recommended partners.
Overview
- Inquiry results with RSSI (1.2)
- Adaptive frequency hopping (AFH) enabled (1.2)
- High throughput (>600 kbps)
- Hold-, Park- and Sniffmode
- Up to 128 bit encryption
- Audio capability on an SCO channel
- Support for very low power modes - sleep and deep sleep
- All bluetooth data rates (up to 57,6/723,2Kbps)
User Interfaces
- Full-speed USB version 2.0 compliant
- Programmable baud rate UART (9,6 Kbps - 921,6 Kbps)
- Debug UART (DUART)
- 16 General Purpose I/O‘s (interruptible)
- PCM audio (1 channel)
- SPI and JTAG interface
Radio Features
- High sensitivity design (-86 dBm typ.)
- Integrated RF shield
- Class 2 module (0dBm typ. output power)
- One antenna port
FEATURES
OUTLINES - ENW89803J
P
R
O
D
U
C
T
Q
U
A
L
I
F
I
E
D
B
L
U
E
T
O
O
T
H
B01839
Bluetooth-Module PAN1450
Cut the Cable
TM
New
Product
Introduction
New
Product
Introduction
Copyright © 2011 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
Rev1.0PAN1311-1321NPI,FY10-072-XXX
www.panasonic.com/rfmodules
piccomponentsmarketing@us.panasonic.com
1-800-344-2112
Applications:
All Wireless Applications
• Printer Adapter and Scanners
• Printers
• Access Points
• Wireless Sensors
• Cable Replacement
• Personal Digital Assistants (PDAs)
• PC Motherboards & Peripherals
• Industrial Applications
Parameter Value Condition / Notes
Receiver Sensitivity (BER=10-3)-86dBm Ideal signal
OutputPower +3dBm @50Ohmantennapin
Power Supply 2.7-3.6V Single operation voltage
Ultra Low Power Scan 80 uA T = 25°C
ACL(Transmit3-DH1) 40mA Enhanced Data Rate, 531.2 kb/s (1)
ACL(Receive3-DH1) 37 mA Enhanced Data Rate, 531.2 kb/s (1)
OperatingTemperatureRange -40°Cto+85°C
Technical Specifications for PAN1311 and PAN1321:
Interfaces:
The PAN1311/PAN1321 Serial Port Profile
Interfacesupports:
• 3.25 MBuad UART
• GeneralpurposeI/Oswithinterruptand
wake-upcapabilities
• JTAG for boundary scan and debug
Block Diagram PAN1311:
Block Diagram PAN1321:
Also Available! Evaluation Kits
(1) Figure indicates maximum possible data rate with this packet type. Total throughput depends on application and interface setting.