SmartRack 12U Mid-Depth Rack Enclosure Cabinet
for Harsh Environments
MODEL NUMBER: SR12UBFFD
Description
This SmartRack 12U Mid-Depth Rack Enclosure Cabinet protects sensitive electronic equipment from harsh
conditions that would overwhelm a typical rack enclosure. It is deal for use in factories, construction areas, utility
plants, warehouses and other areas with limited space that are high in moisture, dust and debris. It can protect
your equipment from falling dirt, dust, drips, splashes and accidental contact with personnel. On the front door
there is a built-in dust filter. The filter is removable and can be replaced with standard furnace filters - they're
simple, inexpensive and effective. To compensate for the added air resistance of the filters, there are 4 large,
high performance intake fans in the front door. The fans pull air through the enclosure, from front to side.
Adjustable rack rails with square mounting holes accommodate up to 12U of standard 19" rackmount equipment.
Supports up to 1000 lbs of equipment.
Features
12U floor enclosure
Protection from falling dirt, dust, drips, splashes and accidental contact with personnel
Adjustable mounting depths from 3" to 32.5" inches
Front door has ventilating louvers
Built-in removable dust filter that can be replaced with standard furnace filters (20" x 24" x 1")
4 large, high-performance fans in front door that pull air through the enclosure, from front to rear
2 cable ports allow cable access while maintaining dust and moisture resistance
Locking, reversible front door
Locking, removable solid side panels
Fully assembled for quick installation
Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) compliance
Specifications
Highlights
Built-In Dust Filter: Protects
against airborne particles and
easily replaced with standard
off-the-shelf furnace filters
Heavy-Duty Construction:
Withstands jolts and vibrations in
harsh working environments
Louvered Door: Keeps out drips,
splashing water and falling debris
4 High-Performance Fans:
Maintain ample airflow to keep
equipment cool
Package Includes
SmartRack 12U Mid-Depth Rack
Enclosure Cabinet
(36) M6 cagenuts
(36) M6 screws
(36) Washers
(2) Keys
(1) Removable/Replaceable dust
filter
(4) Casters
(4) Leveling feet
(1) C13 to NEMA 5-15 power
cord, 10'
Owner's Manual
1 / 3
INPUT
Nominal Input Voltage(s) Supported 120V AC
Nominal Input Voltage Description 120V 50/60 Hz
Input Cord Length (ft.) 10
Input Cord Length (m) 3.05
Input Plug Type NEMA 5-15P
PHYSICAL
Rack Height (U Spaces) 12
Maximum Device Depth (in.) 32.5
Maximum Device Depth (cm) 82.55
Minimum Device Depth (in.) 3
Minimum Device Depth (cm) 7.62
Shipping Dimensions (hwd / in.) 29.8 x 27 x 41.1
Shipping Dimensions (hwd / cm) 64 x 60 x 97.8
Shipping Weight (lbs.) 130
Shipping Weight (kg) 59
Unit Dimensions (hwd / in.) 25.2 x 23.6 x 38.5
Unit Dimensions (hwd / cm) 64 x 59.95 x 97.79
Unit Weight (lbs.) 96
Unit Weight (kg) 43.54
Color Black
Weight Capacity - Stationary (lbs.) 1000
Weight Capacity - Rolling (lbs.) 1000
Weight Capacity - Stationary (kg) 454
Weight Capacity - Rolling (kg) 454
Factory Preset Rack Depth (in.) 10.42
Factory Preset Rack Depth (cm) 26.5
Factory Preset Rack Depth (mm) 265
Maximum Device Depth (mm) 826
Minimum Device Depth (mm) 76
SPECIAL FEATURES
Grounding Lug Front and back door frames
2 / 3
CERTIFICATIONS
Approvals EIA-310-E, IEC 60297-3-100, IP54 Protection Rating, RoHS
WARRANTY
Product Warranty Period (Worldwide) 2-year limited warranty
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
3 / 3
