ALUMINUM ELECTROLYTIC CAPACITORS PZ High Voltage, Smaller-sized series High ripple current. Load life of 2000 hours at 105C. Suited for ballast applications. Compliant to the RoHS directive (2002/95/EC). PT Smaller PZ Specifications Item Performance Characteristics Category Temperature Range - 25 to +105C Rated Voltage Range 200 to 450V Rated Capacitance Range 18 to 470F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.04CV+100 (A). Measurement frequency : 120Hz, Tangent of loss angle (tan ) Rated voltage (V) tan (MAX.) 200 0.12 400 0.15 Temperature : 20C 420 0.20 450 0.20 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z-25C / Z+20C 200 3 400 8 420 8 450 8 Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 2000 hours at 105C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current Type numbering system (Example : 200V 220F) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 12 U P Z 2 D 2 2 1 M HD T d Sleeve (P.E.T.) Size code Capacitance tolerance ( 20%) P 0.5 D0.5 MAX. Configuration Rated capacitance (220F) Rated voltage (200V) L+ 2.0 MAX. Pressure relief vent 15MIN Series name 4MIN Type Configuration (mm) D Pb-free leadwire Pb-free PET sleeve D 10 12.5 16 18 10 PD P 5.0 5.0 7.5 7.5 12.5 to 18 HD d 0.6 0.8 0.8 0.8 * Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100Y ALUMINUM ELECTROLYTIC CAPACITORS PZ series Dimensions Cap.(F) V 200 400 420 Code 2D 2G W6 18 180 22 220 27 270 33 330 39 390 47 470 12.5 x 31.5 56 560 68 680 82 820 101 120 121 150 151 12.5 x 31.5 620 180 181 12.5 x 35.5 700 220 221 12.5 x 40.0 800 270 271 .016 x 31.5 870 .016 x 35.5 1010 .018 x 31.5 1010 .016 x 40.0 1130 .018 x 35.5 1120 .018 x 40.0 1270 330 331 390 391 470 471 180 200 12.5 x 31.5 280 12.5 x 31.5 310 12.5 x 35.5 320 370 12.5 x 35.5 360 12.5 x 40.0 380 12.5 x 35.5 420 12.5 x 40.0 430 .016 x 31.5 440 12.5 x 40.0 480 .016 x 31.5 510 .016 x 35.5 490 .016 x 40.0 550 .018 x 31.5 550 .018 x 35.5 650 .018 x 40.0 740 Case size D x L (mm) Rated ripple 240 400 100 2W .010 x 31.5 .010 x 31.5 .010 x 31.5 .010 x 31.5 450 .016 x 31.5 580 .016 x 35.5 670 .018 x 31.5 670 .016 x 40.0 770 .018 x 35.5 770 .018 x 40.0 880 .016 x 35.5 570 .016 x 40.0 610 .018 x 31.5 610 .018 x 35.5 660 .018 x 40.0 710 Rated ripple current (mArms) at 105C 120Hz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current V 60Hz 120Hz 500Hz 1kHz 10kHz or more 200 0.80 1.00 1.20 1.30 1.40 400 to 450 0.80 1.00 1.25 1.40 1.50 CAT.8100Y