LOW PROFILE HIGH CURRENT SMD
SHIELDED POWER INDUCTOR
||||||||||| | | | |
ASPI-1338
STANDARD SPECIFICATIONS:
APPLICATIONS:
FEATURES:
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001:2008
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Revised: 04.12.12
Visit www.abracon.com for Terms & Conditions of Sale
OPTIONS AND PART IDENTIFICATION:
(Left blank if standard)
•
100% lead (Pb) free.
•
Lowest DCR/uH, in this package size.
•
Frequency range up to 5.0MHZ.
•
Handles high transient current spikes without saturation
•
Ultra low buzz noise, due to composite construction.
•
PDA/Notebook/Desktop/Server applications.
•
Low profile, high current power supplies.
•
Battery powered devices.
•
DC/DC converter for Field Programmable Gate Array(FPGA)
Key Electrical Specifications @25oC
Part Number
Inductance
@ 0A
Tolerance Test Freq DCR Typ DCR Max
Saturation
Current
Temperature
Rise Current
Units
μ
H
%
kHz
m
Ω
m
Ω
A
A
Symbol
L
N, M
Isat*
Irms*
ASPI-1338-R22
0.22
N
200
0.75
1.3
65.0
38.5
ASPI-1338-8R2
8.2
M
200
26.5
31
13.5
8.0
Contact ABRACON for other values available.
Test Conditions
1. Inductance tested at 200kHz, 0.25V, 0A; Tolerance M=±20%, N=±30%
2. All test data is in reference to 25°C ambient.
3. Isat will cause the inductance value to drop approximately 30%
4. Irms will cause an approximate ΔT of 40°C
5. The part temperature (ambient + temp. rise) should not exceed 125°C under worst case operating
conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other
cooling provisions all affect the part temperature. Part temperature should be verified in the end
application.
6. Please contact Abracon for the availability of other inductance values.
PARAMETERS
ABRACON P/N:
Operating temperature:
Storage temperature:
ASPI-1338 xxxx
-40˚C to +125˚C
Less than +40˚C, and 70% RH
12.9 x 13.8 x 3.8mm
ASPI-1338- -
*N for 0.22µH
*M for 8.2µH
Inductance Code
Please refer to the
Electrical Spec Table
Packaging
T: Tape and Reel (500pcs / reel)
Tolerance
M: ±20% *
N: ±30% *
DC current
0A
10A
20A
30A
38.5A
40A
50A
60A
65A
70A
80A
L(0.22uH) 0.214 0.206 0.200 0.196 0.194 0.190 0.183 0.179 0.177 0.171 0.168
ΔT( o
C)
0.00
0.70
3.70
12.60
21.00
25.40
39.40
54.00
69.40
86.80
103.0
ASPI-1338-R22
DC current
0A
2A
4A
6A
8A
10A
12A
13.5A
L(8.2uH) 8.117 8.05 7.894 7.707 7.475 7.228 6.951 6.741
ΔT( oC) 0.00 0.50 5.40 15.50 34.20 63.40 103.8 112.4
ASPI-1338-8R2
LOW PROFILE HIGH CURRENT SMD
SHIELDED POWER INDUCTOR
|||||||||||| | | |
ASPI-1338
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001:2008
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Revised: 04.12.12
Visit www.abracon.com for Terms & Conditions of Sale
12.9 x 13.8 x 3.8mm
ELECTRICAL CHARACTERISTIC CURVES
OUTLINE DRAWING:
Recommended Land Pattern
Dimension: mm
A Max B Max C Max D E Ref F G H I
12.9 14.0 3.8 4.0±0.5 for ASPI-1338-R22
4.7±0.3 for ASPI-1338-8R2
8.4 2.0 14.5 5.0 8.0
G H I
14.5
5.0
8.0
LOW PROFILE HIGH CURRENT SMD
SHIELDED POWER INDUCTOR
||||||||||| | | | |
ASPI-1338
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001:2008
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Revised: 04.12.12
Visit www.abracon.com for Terms & Conditions of Sale
12.9 x 13.8 x 3.8mm
REFLOW PROFILE:
I
Storage Conditions and Handling
(1) Temperature and humidity conditions : less than 40oC and 70% RH.
(2) Products should be used within 6 months.
(3) The packaging material should be kept where no chlorine or sulfur exists in the air.
(4) Do not touch the electrodes (soldering terminals) with fingers as this may lead to deterioration of solder
ability
(5) The use of tweezers or vacuum pick-ups is strongly recommended for individual components.
(6) Bulk handling should ensure that abrasion and mechanical shock are minimized.
Profile Feature
Assembly
Average Ramp-Up Rate
(Ts
max
to Tp) 3°C /second max.
Preheat
-Temperature Min (Ts min)
-Temperature Max (Ts max)
-Time (ts min to ts max)
150°C
200°C
60-180 seconds
Time maintained above:
-Temperature (TL)
-Time (t
L
)
217°C
60-150 seconds
Peak/Classification Temperature (Tp)
245+0°C
Time within 5°C of actual Peak
Temperature (tp) 20-40 seconds
Ramp-Down Rate
6°C/seconds max
Time 25°C to Peak Temperature
8 minutes max.
Dimension: mm
Ao13.2
Bo13.8
Ko4.0
A 330
B 100
C 13.5
D 24
TAPE & REEL:
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.
Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component
failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from
Abracon Corporation is required. Please contact Abracon Corporation for more information.
T: 500pcs/Reel
