Document Number: 94458 For technical questions, contact: ind-modules@vishay.com www.vishay.com
Revision: 06-May-08 1
Schottky Rectifier, 120 A
120NQ045PbF
Vishay High Power Products
FEATURES
150 °C TJ operation
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long
term reliability
Lead (Pb)-free
Designed and qualified for industrial level
DESCRIPTION
The 120NQ.. high current Schottky rectifier module series
has been optimized for low reverse leakage at high
temperature. The proprietary barrier technology allows for
reliable operation up to 150 °C junction temperature. Typical
applications are in high current switching power supplies,
plating power supplies, UPS systems, converters,
freewheeling diodes, welding, and reverse battery
protection.
PRODUCT SUMMARY
IF(AV) 120 A
VR45 V
HALF-PAK (D-67)
Lug terminal
anode
Base
cathode
RoHS
COMPLIANT
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
IF(AV) Rectangular waveform 120 A
VRRM 45 V
IFSM tp = 5 µs sine 26 000 A
VF120 Apk, TJ = 125 °C 0.62 V
TJRange - 55 to 150 °C
VOLTAGE RATINGS
PARAMETER SYMBOL 120NQ045PbF UNITS
Maximum DC reverse voltage VR45 V
Maximum working peak reverse voltage VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
See fig. 5 IF(AV) 50 % duty cycle at TC = 105 °C, rectangular waveform 120
A
Maximum peak one cycle
non-repetitive surge current
See fig. 7
IFSM
5 µs sine or 3 µs rect. pulse Following any rated
load condition and with
rated VRRM applied
26 000
10 ms sine or 6 ms rect. pulse 1550
Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 13 A, L = 1 mH 81 mJ
Repetitive avalanche current IAR
Current decaying linearly to zero in 1 µs
Frequency limited by TJ maximum VA = 1.5 x VR typical 13 A
www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 94458
2Revision: 06-May-08
120NQ045PbF
Vishay High Power Products Schottky Rectifier, 120 A
Note
(1) Pulse width < 500 µs
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum forward voltage drop
See fig. 1 VFM (1)
120 A TJ = 25 °C 0.63
V
240 A 0.86
120 A TJ = 125 °C 0.62
240 A 0.81
Maximum reverse leakage current
See fig. 2 IRM (1) TJ = 25 °C VR = Rated VR
10 mA
TJ = 125 °C 500
Maximum junction capacitance CTVR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C 5200 pF
Typical series inductance LSFrom top of terminal hole to mounting plane 7.0 nH
Maximum voltage rate of change dV/dt Rated VR10 000 V/µs
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction and storage
temperature range TJ, TStg - 55 to 150 °C
Maximum thermal resistance,
junction to case RthJC DC operation
See fig. 4 0.38
°C/W
Typical thermal resistance,
case to heatsink RthCS Mounting surface, smooth and greased 0.05
Approximate weight 30 g
1.06 oz.
Mounting torque minimum
Non-lubricated threads
3 (26.5)
N · m
(lbf in)
maximum 4 (35.4)
Terminal torque minimum 3.4 (30)
maximum 5 (44.2)
Case style HALF-PAK module
Document Number: 94458 For technical questions, contact: ind-modules@vishay.com www.vishay.com
Revision: 06-May-08 3
120NQ045PbF
Schottky Rectifier, 120 A Vishay High Power Products
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Forward Voltage Drop - VFM (V)
Instantaneous Forward Current - I F (A)
0.0 0.5 1.0 1.5 2.0 2.5
1
10
100
1000
Tj = 25°C
Tj = 125°C
Tj = 150°C
Reverse Current - I R (mA)
Reverse Voltage - V R (V)
0 5 10 15 20 25 30 35 40 45
0.01
0.1
1
10
100
1000
10000
25°C
50°C
100°C
75°C
125°C
150°C
Reverse Voltage - V R (V)
Junction Capacitance - C T (pF)
1000
10000
0 1020304050
T = 2 5 ° C
J
t1, Rectangular Pulse Duration (Seconds)
Thermal Impedance Z thJC (°C/W)
1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01
0.001
0.01
0.1
1
Single Pulse
(Thermal Resistance)
D = 0.20
D = 0.75
D = 0.50
D = 0.33
D = 0.25
www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 94458
4Revision: 06-May-08
120NQ045PbF
Vishay High Power Products Schottky Rectifier, 120 A
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 6 - Forward Power Loss Characteristics
Fig. 7 - Maximum Non-Repetitive Surge Current
Fig. 8 - Unclamped Inductive Test Circuit
Note
(9) Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR
Average Forward Current - I F (AV)(A)
Allowable Case Temperature (°C)
050 100 150 200 250
20
40
60
80
100
120
140
160
DC
see note (1)
Square wave (D=0.50)
80% rated Vr applied
Average Forward Current - I F (AV) (A)
Average Power Loss (Watts)
0 2040608010012014016018
0
20
40
60
80
100
120
140
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
RMS limit DC
Square Wave Pulse Duration - t p(microsec)
Non-Repetitive Surge Current - I FSM (A)
1000
10000
100000
10 100 1000 10000
At Any Rated Load Condition
And With Ra ted V App lied
Following Surge
RRM
Current
monitor
High-speed
switch
D.U.T.
Rg = 25 Ω
+
Freewheel
diode Vd = 25 V
L
IRFP460
40HFL40S02
Document Number: 94458 For technical questions, contact: ind-modules@vishay.com www.vishay.com
Revision: 06-May-08 5
120NQ045PbF
Schottky Rectifier, 120 A Vishay High Power Products
ORDERING INFORMATION TABLE
1- Average current rating (x 10)
2- Product silicon identification
3- N = Not isolated
4- Q = Schottky rectifier diode
5- Voltage rating (045 = 45 V)
6- Lead (Pb)-free
Device code
51324
6
12 0 N Q 045 PbF
LINKS TO RELATED DOCUMENTS
Dimensions http://www.vishay.com/doc?95020
Document Number: 95020 For technical questions, contact: indmodules@vishay.com www.vishay.com
Revision: 20-May-09 1
D-67 HALF-PAK
Outline Dimensions
Vishay Semiconductors
DIMENSIONS in millimeters (inches)
30 ± 0.05
(1.2 ± 0.002)
5 (0.20)
4 (0.16)
13 (0.51)
24.4 (0.96)
5 (0.196) + 45° Ø 7.3 ± 0.1 (0.29 ± 0.0039)
17.5 (0.69)
16.5 (0.65)
Ø 4.3 - 0.1
0.0
(Ø 0.169 )
- 0.004
0.000
¼" - 20 UNC
40 MAX. (1.58)
21 (0.82)
20 (0.78)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.