https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page1/14
High-current terminal block-UKH 50-3L-3076634
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
High-current terminal block, nom. voltage: 1000 V, nominal current: 150 A, connection method: Screw
connection, number of connections: 6, number of positions: 3, cross section: 16 mm²-70 mm², AWG:6-2/0,
width: 60 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32, NS 35/15-2,3
Your advantages
Reliable cable connection is ensured by three-point centering of the conductor in the prismatic sleeve base
Low contact resistance of the contact surface due to ribbing
Screw locking by means of spring-loaded elements in the clamping part
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 3 pc
GTIN
GTIN 4046356707084
Weight per Piece (excluding packing) 341.400 g
Custom tariff number 85369010
Country of origin Poland
Technical data
General
Number of positions 3
Number of levels 1
Number of connections 6
Potentials 3
Nominal cross section 50 mm²
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page2/14
High-current terminal block-UKH 50-3L-3076634
Technical data
General
Color gray
Insulating material PA
Flammability rating according to UL 94 V0
Rated surge voltage 8 kV
Degree of pollution 3
Overvoltage category III
Insulating material group I
Maximum power dissipation for nominal condition 4.73 W
Maximum load current 150 A (with 50 mm² conductor cross section)
Nominal current IN150 A
Nominal voltage UN1000 V
Open side panel No
Relative insulation material temperature index (Elec., UL 746 B) 130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold -60 °C
Surface flammability NFPA 130 (ASTM E 162) passed
Specific optical density of smoke NFPA 130 (ASTM E 662) passed
Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C) passed
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Dimensions
Width 60 mm
Length 70.5 mm
Height NS 35/15 83.5 mm
Height NS 32 81 mm
Connection data
Connection method Screw connection
Screw thread M6
Stripping length 24 mm
Tightening torque, min 6 Nm
Tightening torque max 8 Nm
Connection in acc. with standard IEC60947-7-1
Note Note: Product releases, connection cross sections and notes on
connecting aluminum cables can be found in the download area.
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page3/14
High-current terminal block-UKH 50-3L-3076634
Technical data
Connection data
Conductor cross section solid min. 16 mm²
Conductor cross section solid max. 70 mm²
Conductor cross section AWG min. 6
Conductor cross section AWG max. 2/0
Conductor cross section flexible min. 25 mm²
Conductor cross section flexible max. 70 mm²
Min. AWG conductor cross section, flexible 3
Max. AWG conductor cross section, flexible 2/0
Conductor cross section flexible, with ferrule without plastic sleeve min. 25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 50 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 50 mm²
2 conductors with same cross section, solid min. 10 mm²
2 conductors with same cross section, solid max. 16 mm²
2 conductors with same cross section, stranded min. 10 mm²
2 conductors with same cross section, stranded max. 16 mm²
Two conductors with the same cross section stranded, with ferrule and
without plastic sleeve, minimum 10 mm²
Two conductors with the same cross section stranded, with ferrule and
without plastic sleeve, maximum 16 mm²
Internal cylindrical gage B10
Standards and Regulations
Connection in acc. with standard IEC60947-7-1
Flammability rating according to UL 94 V0
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page4/14
High-current terminal block-UKH 50-3L-3076634
Circuit diagram Dimensional drawing
11
7,5
12
Schematic diagram
90°
Connecting aluminum cables. Further notes can be found in the download area
Classifications
eCl@ss
eCl@ss 4.0 27141120
eCl@ss 4.1 27141120
eCl@ss 5.0 27141120
eCl@ss 5.1 27141100
eCl@ss 6.0 27141100
eCl@ss 7.0 27141120
ETIM
ETIM 3.0 EC000897
ETIM 4.0 EC000897
ETIM 5.0 EC000897
ETIM 6.0 EC000897
ETIM 7.0 EC000897
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page5/14
High-current terminal block-UKH 50-3L-3076634
Classifications
UNSPSC
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
UNSPSC 19.0 39121410
Approvals
Approvals
Approvals
EAC
Ex Approvals
Approval details
EAC RU C-
DE.AI30.B.01102
Accessories
Accessories
DIN rail
DIN rail perforated-NS 32 PERF 2000MM-1201002
DIN rail perforated, G profile, width:32 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated
with a thick layer, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page6/14
High-current terminal block-UKH 50-3L-3076634
Accessories
DIN rail, unperforated-NS 32 UNPERF 2000MM-1201015
DIN rail, unperforated, G profile, width:32 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated
with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page7/14
High-current terminal block-UKH 50-3L-3076634
Accessories
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum,
uncoated, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
End cap-NS 35/15 CAP-1206573
DIN rail end piece, for DIN rail NS 35/15
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page8/14
High-current terminal block-UKH 50-3L-3076634
Accessories
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white
passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated,
length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page9/14
High-current terminal block-UKH 50-3L-3076634
Accessories
DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
End cap-NS 35/ 7,5 CAP-1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel,
galvanized, passivated with a thick layer, length:2000 mm, color:silver
End block
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page10/14
High-current terminal block-UKH 50-3L-3076634
Accessories
End clamp-E/AL-NS 32-1201659
End clamp, for end support of UKH 50 - UKH 240, is pushed onto DIN rail NS 32 and fixed with 2 screws, width: 10 mm,
color: Aluminum
End clamp-E/AL-NS 35-1201662
End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm,
color: aluminum
Labeled terminal marker
Zack marker strip-ZB 10 CUS-0824941
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels:
10
Zack marker strip-ZB10,LGS:FORTL.ZAHLEN-1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2
mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip-ZB10,QR:FORTL.ZAHLEN-1053027
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm,
lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page11/14
High-current terminal block-UKH 50-3L-3076634
Accessories
Marker for terminal blocks-ZB10,LGS:L1-N,PE-1053412
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks-ZB10,LGS:U-N-1053438
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: U, V, W, N, GND,
U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size:
10.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks-UC-TM 10 CUS-0824605
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual
labels: 48
Marker for terminal blocks-UCT-TM 10 CUS-0829623
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual
labels: 36
Marker for terminal blocks-TMT 10 R CUS-0824500
Marker for terminal blocks, can be ordered: by line, white, labeled according to customer specifications, mounting type:
snap into universal marker groove, snap into flat marker groove, for terminal block width: 10.2 mm, lettering field size:
6.35 x 10.15 mm
Marker pen
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page12/14
High-current terminal block-UKH 50-3L-3076634
Accessories
Marker pen-X-PEN 0,35-0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Mounting material
Insertion profile-UKH 50 EP-3009228
Insertion profile, color: silver
Pick-off terminal block
Pick-off terminal block-AGK 10-UKH 50-3001763
Pick-off terminal block, Can only be used in conjunction with UKH 50/70, nom. voltage: 1000 V, nominal current: 57 A,
connection method: Screw connection, number of connections: 1, cross section: 0.5 mm²-10 mm², AWG:20-8, width:
10.2 mm, height: 34.7 mm, color: gray
Screw bridge
Fixed bridge-FBI 2-20-0201346
Fixed bridge, pitch: 20 mm, number of positions: 2, color: silver
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page13/14
High-current terminal block-UKH 50-3L-3076634
Accessories
Fixed bridge-FBI 3-20-0201317
Fixed bridge, pitch: 20 mm, number of positions: 3, color: silver
Fixed bridge-FBI 2-20-EX-0201113
Fixed bridge, number of positions: 2, color: silver
Fixed bridge-FBI 3-20-EX-0201812
Fixed bridge, number of positions: 3, color: silver
Screwdriver tools
Screwdriver-SZS 1,2X8,0 VDE-1205082
Screwdriver, slot-headed, VDE insulated, size: 1.2 x 8.0 x 175 mm, 2-component grip, with non-slip grip
Terminal marking
Zack marker strip-ZB 10:UNBEDRUCKT-1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual
labels: 10
https://www.phoenixcontact.com/us/products/3076634
01/18/2021Page14/14
High-current terminal block-UKH 50-3L-3076634
Accessories
Marker for terminal blocks-UC-TM 10-0818069
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48
Marker for terminal blocks-UCT-TM 10-0829142
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,
BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field
size: 8.9 x 9.6 mm, Number of individual labels: 36
Marker for terminal blocks-TMT 10 R-0816210
Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK
ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK
S1.1, perforated, mounting type: snap into universal marker groove, snap into flat marker groove, for terminal block width:
10.2 mm, lettering field size: 6.35 x 10.15 mm, Number of individual labels: 10000
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com