F-219 HLE-130-02-F-DV HLE-110-02-L-DV HLE-116-02-L-DV-K (2.54 mm) .100" HLE SERIES COST-EFFECTIVE RELIABLE SOCKET Mates With: TSW, MTSW, DW, EW, ZW, TLW, TSM, MTLW, HW HLE NO. PINS 1 PER ROW PLATING OPTION 02 TAIL OPTION DV OTHER OPTION -BE SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?HLE -F = Gold flash on contact, Matte Tin on tail Insulator Material: Black Liquid Crystal Polymer Contact Material: BeCu Plating: Au or Sn over 50 " (1.27 m) Ni Current Rating (HLE/TSM): 4.1 A per pin (2 pins powered) Voltage Rating: 400 VAC Operating Temp Range: -55 C to +125 C Insertion Depth: (1.78 mm) .070" to (3.43 mm) .135", pass-through, or (2.59 mm) .102" min plus board thickness for bottom entry RoHS Compliant: Yes Leave blank for Surface Mount -A = Alignment Pin (4 positions min.) Metal or plastic at Samtec discretion (N/A with -TE, -PE & -LC) -L = 10 " (0.25 m) Gold on contact, Matte Tin on tail = Bottom Entry (N/A with -TE) (3.66) .144 (6.60) .260 (1.27) .050 (Requires -BE for Bottom Entry) (1.60) .063 DIA 02 thru 50 -LC -TE = Through-hole Top Entry PROCESSING Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (02-20) (0.15 mm) .006" max (21-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) = Locking Clip (2 positions min.) (N/A with -A) (Manual placement required) (1.27) .050 (3.05) .120 (2.54) .100 For complete scope of recognitions see www.samtec.com/quality -K (2.54) .100 No. of Positions x (2.54) .100 RECOGNITIONS 02 (5.08) .200 (2.54) .100 FILE NO. E111594 -PE = Through-hole Pass-through Entry 01 (1.42) .056 = (6.50 mm) .256" DIA Polyimide Film Pick & Place Pad (3 positions min.) Not available with -TE or -PE tail option -P ALSO AVAILABLE = Metal Pick & Place Pad (3 positions min.) (MOQ Required) * Other platings (3.51) .138 (0.51) .020 -PE (2.30) .090 -TE (7.62) .300 (7.11) .280 x (5.71) .225 (3.86) .152 (Requires -BE for Bottom Entry) Note: Some lengths, styles and options are non-standard, non-returnable. -TR = Tape & Reel Packaging (29 positions max.) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.