Complementary Power Transistor Description: Designed for use in general purpose power amplifier and switching applications. Features: * * * ollector-Emitter sustaining Voltage. C VCEO(sus) = 100V (Min.) DC Current Gain hFE = 25 (Min.) at IC = 1.5A Current Gain Bandwidth Product fT = 3MHz (Min.) at IC = 1A Maximum Ratings Characteristic Symbol Rating Collector-Emitter Voltage VCEO 100 Collector-Base Voltage VCBO 115 Emitter-Base Voltage VEBO 5 Collector Current-Continuous -Peak IC 25 40 Base Current IB 5 Total Power Dissipation at TC = 25C Derate above 25C PD 125 1 W W/C TJ, TSTG -65 to +150 C Operating and Storage Junction Temperature Range Unit V A Thermal Characteristics Characteristic Thermal Resistance Junction to Case Symbol Max. Unit Rjc 1 C/W www.element14.com www.farnell.com www.newark.com Page <1> 14/03/13 V1.0 Complementary Power Transistor Electrical Characteristics: (TC = 25C unless otherwise noted) Characteristic Symbol Min. Max. Unit Collector-Emitter Breakdown Voltage (1) IC = 30mA, IB = 0 V(BR)CEO 100 - V Collector Cut off Current VCE = 60V, IB = 0 ICEO - 1 Collector Cut off Current VCE = 100V, VEB = 0 ICES - 0.7 Emitter Cut off Current VEB = 5V, IC = 0 IEBO - 1 hFE 25 10 5 - Collector-Emitter Saturation Voltage IC = 15A, IB = 1.5A IC = 25A, IB = 5A VCE(sat) - 1.8 4 Base-Emitter On Voltage IC = 15A, VCE = 4V IC = 25A, VCE = 4V VBE(on) - 2 4 fT 3 - OFF Characteristics mA ON Characteristics (1) DC Current Gain VCE = 4V, IC = 1.5A VCE = 4V, IC = 15A VCE = 4V, IC = 25A - V Dynamic Characteristics Current Gain Bandwidth Product (2) IC = 1A, VCE = 10V, f = 1MHz MHz (1) Pulse Test: Pulse Width = 300s, Duty Cycle 2% (2) fT = |hfe| * ftest www.element14.com www.farnell.com www.newark.com Page <2> 14/03/13 V1.0 Complementary Power Transistor Figure - 2 DC Current Gain Figure - 3 Turn-Off Time Figure - 4 Turn-On time Figure - 5 Reverse Base Safe Operating Area Figure - 6 Active Region Safe Operating Area There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown safe operating area curves indicate IC-VCE limits of the transistor that must be observed for reliable operation i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of SOA curve is based on TJ(PK) = 150C; TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(PK) 150C. At high case temperatures, thermal limitation will reduce the power that can be handled to values less than the limitations imposed by second breakdown. www.element14.com www.farnell.com www.newark.com Page <3> 14/03/13 V1.0 Complementary Power Transistor Pin Configuration: 1. Base 2. Collector 3. Emitter Dimensions Min. Max. A 20.63 22.38 B 15.38 16.2 C 1.9 2.7 D 5.1 6.1 E 14.81 15.22 F 11.72 12.84 G 4.2 4.5 H 1.82 2.46 I 2.92 3.23 J 0.89 1.53 K 5.26 5.66 L 18.5 21.5 M 4.68 5.36 N 2.4 2.8 O 3.25 3.65 P 0.55 0.7 Dimensions : Millimetres Part Number Table Description Part Number Transistor, NPN, TO-247 BD249C Transistor, PNP, TO-247 BD250C Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <4> 14/03/13 V1.0