APTM20AM08FT VDSS = 200V RDSon = 8mW max @ Tj = 25C ID = 208A @ Tc = 25C Phase leg MOSFET Power Module VBUS NTC2 Application * Welding converters * Switched Mode Power Supplies * Uninterruptible Power Supplies Q1 G1 OUT S1 Q2 G2 S2 0/VBU S NTC1 G2 S2 VBUS 0/VBUS OUT OUT S1 S2 NTC2 G1 G2 NTC1 Features * Power MOS 7(R) FREDFETs - Low RDSon - Low input and Miller capacitance - Low gate charge - Fast intrinsic reverse diode - Avalanche energy rated - Very rugged * Kelvin source for easy drive * Very low stray inductance - Symmetrical design - Lead frames for power connections * Internal thermistor for temperature monitoring * High level of integration Benefits * Outstanding performance at high frequency operation * Direct mounting to heatsink (isolated package) * Low junction to case thermal resistance * Solderable terminals both for power and signal for easy PCB mounting * Low profile Absolute maximum ratings IDM VGS RDSon PD IAR EAR EAS Tc = 25C Tc = 80C Continuous Drain Current Pulsed Drain current Gate - Source Voltage Drain - Source ON Resistance Maximum Power Dissipation Avalanche current (repetitive and non repetitive) Repetitive Avalanche Energy Single Pulse Avalanche Energy Tc = 25C Max ratings 200 208 155 832 30 8 781 100 50 3000 Unit V A V mW W A May, 2004 ID Parameter Drain - Source Breakdown Voltage mJ These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website - http://www.advancedpower.com 1-6 APTM20AM08FT - Rev 1 Symbol VDSS APTM20AM08FT All ratings @ Tj = 25C unless otherwise specified Electrical Characteristics Symbol Characteristic BVDSS Drain - Source Breakdown Voltage IDSS RDS(on) VGS(th) IGSS Test Conditions VGS = 0V, ID = 375A Min 200 Typ Tj = 25C Tj = 125C Zero Gate Voltage Drain Current VGS = 0V,VDS = 200V VGS = 0V,VDS = 160V Drain - Source on Resistance Gate Threshold Voltage Gate - Source Leakage Current VGS = 10V, ID = 104A VGS = VDS, ID = 5mA VGS = 30 V, VDS = 0V 3 Max Unit V 375 1500 8 5 150 mW V nA Max Unit A Dynamic Characteristics Symbol Ciss Coss Crss Qg Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total gate Charge Qgs Gate - Source Charge Qgd Gate - Drain Charge Td(on) Turn-on Delay Time Tr Td(off) Test Conditions VGS = 0V VDS = 25V f = 1MHz Min VGS = 10V VBus = 100V ID = 208A Turn-off Delay Time Tf Fall Time Eon Turn-on Switching Energy u Eoff Turn-off Switching Energy v Eon Turn-on Switching Energy u Eoff Turn-off Switching Energy v nF nC 106 134 32 Inductive switching @ 125C VGS = 15V VBus = 133V ID = 208A RG = 2.5W Rise Time Typ 14.4 4.66 0.29 280 64 ns 88 116 Inductive switching @ 25C VGS = 15V, VBus = 133V ID = 208A, RG = 2.5 1698 J 1858 Inductive switching @ 125C VGS = 15V, VBus = 133V ID = 208A, RG = 2.5 1872 J 1972 Source - Drain diode ratings and characteristics Reverse Recovery Time Qrr Reverse Recovery Charge Min Typ Tj = 25C Max 208 155 1.3 5 230 Tj = 125C 450 Tc = 25C Tc = 80C VGS = 0V, IS = - 208A IS = - 208A VR = 133V diS/dt = 200A/s IS = - 208A VR = 133V diS/dt = 200A/s Tj = 25C 1.8 Tj = 125C 6.8 Unit A V V/ns ns C May, 2004 trr Test Conditions u Eon includes diode reverse recovery. v In accordance with JEDEC standard JESD24-1. w dv/dt numbers reflect the limitations of the circuit rather than the device itself. VR VDSS Tj 150C IS - 208A di/dt 700A/s APT website - http://www.advancedpower.com 2-6 APTM20AM08FT - Rev 1 Symbol Characteristic Continuous Source current IS (Body diode) VSD Diode Forward Voltage dv/dt Peak Diode Recovery w APTM20AM08FT Thermal and package characteristics Symbol RthJC VISOL TJ TSTG TC Torque Wt Characteristic Junction to Case Min RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz 2500 -40 -40 -40 Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight To Heatsink Typ Max 0.16 150 125 100 4.7 160 M5 Unit C/W V C N.m g Temperature sensor NTC Symbol Characteristic R25 Resistance @ 25C B 25/85 T25 = 298.16 K RT = Min Typ 68 4080 Max Unit kW K R 25 e ae 1 1 ou T: Thermistor temperature - //u RT: Thermistor value at T exp e B25 / 85 cc e T25 T ou e APT website - http://www.advancedpower.com 3-6 APTM20AM08FT - Rev 1 May, 2004 Package outline APTM20AM08FT Typical Performance Curve Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration Thermal Impedance (C/W) 0.18 0.16 0.9 0.14 0.7 0.12 0.1 0.5 0.08 0.06 0.3 0.04 Single Pulse 0.1 0.02 0.05 0 0.00001 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) Low Voltage Output Characteristics VGS=15V 600 10V 500 9V 400 8.5V 300 8V 7.5V 200 7V 100 VDS > ID(on)xRDS(on)MAX 250s pulse test @ < 0.5 duty cycle 500 400 300 200 TJ=25C 100 TJ=125C 6.5V 0 0 4 8 12 16 20 24 28 0 VDS, Drain to Source Voltage (V) 1.2 Normalized to VGS=10V @ 104A 1.1 1 2 3 4 5 6 7 8 9 10 VGS, Gate to Source Voltage (V) DC Drain Current vs Case Temperature 250 RDS(on) vs Drain Current ID, DC Drain Current (A) VGS=10V 1 VGS=20V 0.9 0.8 200 150 100 50 0 0 50 100 150 200 ID, Drain Current (A) 250 300 25 50 75 100 125 150 TC, Case Temperature (C) APT website - http://www.advancedpower.com May, 2004 RDS(on) Drain to Source ON Resistance TJ=-55C 0 4-6 APTM20AM08FT - Rev 1 ID, Drain Current (A) Transfert Characteristics 600 ID, Drain Current (A) 700 1.10 1.05 1.00 0.95 0.90 -50 -25 0 25 50 75 100 125 150 TJ, Junction Temperature (C) 1.1 1.0 0.9 0.8 0.7 VGS=10V ID= 104A 2.0 1.5 1.0 0.5 0.0 -50 -25 0.6 25 50 75 100 125 150 Maximum Safe Operating Area limited by RDSon 100s 100 1ms 10ms 10 100ms Single pulse TJ=150C 1 -50 -25 0 25 50 75 100 125 150 1 Capacitance vs Drain to Source Voltage 100000 Ciss 10000 Coss 1000 Crss 100 10 20 30 40 50 VDS, Drain to Source Voltage (V) 10 100 1000 VDS, Drain to Source Voltage (V) Gate Charge vs Gate to Source Voltage 14 ID=208A VDS=40V 12 TJ=25C VDS=100V 10 8 VDS=160V 6 4 2 0 0 40 80 120 160 200 240 280 320 Gate Charge (nC) May, 2004 0 VGS, Gate to Source Voltage (V) TC, Case Temperature (C) C, Capacitance (pF) 0 TJ, Junction Temperature (C) 1000 ID, Drain Current (A) VGS(TH), Threshold Voltage (Normalized) Threshold Voltage vs Temperature 1.2 ON resistance vs Temperature 2.5 APT website - http://www.advancedpower.com 5-6 APTM20AM08FT - Rev 1 BVDSS, Drain to Source Breakdown Voltage (Normalized) Breakdown Voltage vs Temperature 1.15 RDS(on), Drain to Source ON resistance (Normalized) APTM20AM08FT APTM20AM08FT Delay Times vs Current Rise and Fall times vs Current 160 120 td(on) 40 tr and tf (ns) td(on) and td(off) (ns) 60 120 td(off) VDS=133V RG=2.5 TJ=125C L=100H 80 100 tr 60 40 20 0 0 0 50 100 150 200 250 300 350 ID, Drain Current (A) 0 6 3 Eoff Eon 2 1 Switching Energy (mJ) VDS=133V RG=2.5 TJ=125C L=100H 50 100 150 200 250 300 350 ID, Drain Current (A) Switching Energy vs Gate Resistance Switching Energy vs Current 4 0 VDS=133V ID=208A TJ=125C L=100H 5 Eoff 4 3 Eon 2 1 0 50 100 150 200 250 300 350 0 5 ID, Drain Current (A) 200 150 100 50 0 25 50 75 100 125 150 175 200 20 25 1000 TJ=150C 100 TJ=25C 10 1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 VSD, Source to Drain Voltage (V) APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website - http://www.advancedpower.com 6-6 APTM20AM08FT - Rev 1 May, 2004 ID, Drain Current (A) 15 Source to Drain Diode Forward Voltage IDR, Reverse Drain Current (A) VDS=133V D=50% RG=2.5 TJ=125C 250 10 Gate Resistance (Ohms) Operating Frequency vs Drain Current 300 Frequency (kHz) tf 80 20 Eon and Eoff (mJ) VDS=133V RG=2.5 TJ=125C L=100H 140 100