TND307TD Ordering number : ENN7987 ExPD (Excellent Power Device) TND307TD General Purpose Driver for PDP Sustain Pulse Drive, Motor Drive, Switching Power Supply, and DC / DC Converter Applications Features * * * * * * * Dual inverter. Monolithic structure(High voltage CMOS process adopted). Withstand voltage of 25V is assured. Wide range of operating voltage : 4.5V to 25V. Peak output current : 1A. Fast switching time(25ns typical at 1000pF load). Fully compatible input to TTL/CMOS(VIH=not more than to 2.6V, at VDD=4.5 to 25V). Specifications Absolute Maximum Ratings at Ta=25C Parameter Supply Voltage Symbol Conditions Ratings VDD VIN Input Voltage Allowable Power Dissipation Unit 0 to 25 V GND--0.3 to VDD+0.3 V 0.25 W Junction Temperature PD max Tj --55 to +150 C Storage Temperature Tstg --55 to +150 C Recommended Operating Conditions at Ta=25C Parameter Operating Supply Voltage Operating Temperature Symbol Conditions Ratings VDD Topr Unit 4.5 to 25 V --40 to +125 C Electrical Characteristics (AC Characteristics) at Ta=25C, VDD=18V, VIN=5V Parameter Symbol Conditions Ratings min typ Unit max Turn-On Rise Time tr CL=1000pF 30 45 ns Turn-Off Fall Time tf CL=1000pF 30 45 ns tD1 CL=1000pF 25 40 ns tD2 CL=1000pF 45 60 ns Delay Time Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 21405IP TS IM TB-00000281 No.7987-1/5 TND307TD Electrical Characteristics (DC Characteristics) at Ta=25C, VDD=4.5 to 25V Parameter Symbol Logic "1" Input Voltage Logic "0" Input Voltage VIH VIL Input Bias Current IIN High Level Output Voltage Low Level Output Voltage VOH VOL VDD Supply Current Isupp Output High Short Circuit Pulse Current Output Low Short Circuit Pulse Current Output On Resistance IO+ IO-ROUT Ratings Conditions min typ Unit max 2.6 VIN=0 or VDD IO=0 V --1 0.8 V 1 A 0.1 V 4.5 mA 0.2 mA VDD--0.1 IO=0 VDD=10V, VIN=3V, (both inputs) V 1.0 VDD=10V, VIN=0, (both inputs) VDD=18V, PW10s, VOUT=0 1.0 A VDD=18V, PW10s, VOUT=18V VDD=18V, Iload=10mA, VOUT="H" 1.0 A 8 12 VDD=18V, Iload=10mA, VOUT="L" 6 10 Package Dimensions unit : mm 2234 3.0 5 0.425 6.4 0.95 4 0.25 0.05 1.0 1 4.5 0.5 8 0.95 0.65 0.125 1 : VDD 2 : INA 3 : GND 4 : INB 5 : NC 6 : OUTB 7 : OUTA 8 : VDD SANYO : TSSOP8 Block Diagram VDD IN OUT GND No.7987-2/5 TND307TD Switching Time Test Circuit VDD=18V 4.7F 0.1F TND307TD INPUT A OUTPUT A 1000pF INPUT B OUTPUT B 1000pF INPUT RISE AND FALL +5V TIMES=5ns +0.4V INPUT 90% 10% tD1 +18V t D2 90% 90% INVERTING OUTPUT 10% 0V 10% tf tr tr -- Tc 50 VIN=5V CL=1000pF 60 Turn-On Rise Time, tr -- ns Turn-On Rise Time, tr -- ns 45 40 35 30 25 40 30 10 0 50 100 Case Temperature, Tc -- C 150 0 5 10 40 35 30 25 25 30 IT05639 VIN=5V CL=1000pF Turn-Off Fall Time, tf -- ns 45 20 tf -- VDD 60 VDD=18V VIN=5V CL=1000pF 15 Supply Voltage, VDD -- V IT05638 tf -- Tc 50 Turn-Off Fall Time, tf -- ns 50 20 20 15 --50 tr -- VDD 70 VDD=18V VIN=5V CL=1000pF 50 40 30 20 20 15 --50 10 0 50 100 Case Temperature, Tc -- C 150 IT05640 0 5 10 15 20 Supply Voltage, VDD -- V 25 30 IT05641 No.7987-3/5 TND307TD tD1 -- Tc 50 40 VIN=5V CL=1000pF 50 Delay Time, tD1 -- ns Delay Time, tD1 -- ns 45 35 30 25 20 tD1 -- VDD 60 VDD=18V VIN=5V CL=1000pF 40 30 20 10 15 10 --50 0 0 50 100 Case Temperature, Tc -- C 0 70 60 50 40 30 15 20 25 30 IT05643 tD2 -- VDD 160 VIN=5V CL=1000pF 140 Delay Time, tD2 -- ns 80 10 Supply Voltage, VDD -- V VDD=18V VIN=5V CL=1000pF 90 5 IT05642 tD2 -- Tc 100 Delay Time, tD2 -- ns 150 120 100 80 60 40 20 20 10 0 --50 0 0 50 100 Case Temperature, Tc -- C 5 10 1.0 0.8 20 25 30 IT08459 IO(--) -- Tc 1.4 Output "Low" Short Circuit Pulse Current, IO(--) -- A 1.2 15 Supply Voltage, VDD -- V VDD=18V 0.6 VDD=18V 1.2 1.0 0.8 0.6 0.4 --50 0 50 100 Case Temperature, Tc -- C 150 IT05646 0.4 --50 0 50 100 Case Temperature, Tc -- C 150 IT05647 PD -- Ta 0.30 Allowable Power Dissipation, PD -- W 0 IT05644 IO(+) -- Tc 1.4 Output "High" Short Circuit Pulse Current, IO(+) -- A 150 0.25 0.20 0.15 0.10 0.05 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT07154 No.7987-4/5 TND307TD Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2005. Specifications and information herein are subject to change without notice. PS No.7987-5/5