ICD056GVP163D-05 - Burndy - Datasheet.Directory

TARGET MARKETS / APPLICATIONSFEATURES & BENEFITS

• Full Duplex 4 Channel 850nm Parallel Active Optical Cable

• Supports transmission rates up to 14 Gbit/s per channel

• QSFP-based modules at each cable end

• QSFP interfaces fully compliant to SFF- 8436

• Hot pluggable electrical interfaces

• QSFP-based module supports Rx Pre-Emphasis

• EEPROM-based Serial-ID, accessible through two-wire

Serial Interface

• Multi-channel 850nm VCSEL array

• Multi-channel PIN-detector array

• Helix type 8-fiber Multi-Mode Optical cable that allows for

bending in any direction

• Fire-resistant OFNP (optical Fiber Non-Conductive

Plenum) rated cable

• Low power QSFP module: 0.8 Watts (typ.) per end

• Power class 4

• 0°C to +70°C operating case temperature

• Laser Class 1 IEC/CDRH compliant

• Data Center

• High Performance Computing

• Switching

• Industrial

OVERVIEW

The FCI QSFP+ FDR, 56 Gb/s, Active Optical Cable series provides an

optical transmission based cost effective, high performance, plug &

play interconnect solution. The AOC features optical transceivers

inside both cable connectors enabling improved performance and

distance capability versus traditional copper assemblies.

The transceivers at both ends assure proper interoperability and

provide excellent link performance. The assembly is a full duplex, 4

channel construction with each channel capable of transmitting

data at rates up to 14 Gb/s. Typical applications serve signal

transmission distances between 3m and 100m.

QSFP+ , 56 GB/S, ACTIVE OPTICAL CABLE

OPTICAL INTERCONNECT

CMY

130-qsfp+_56gbs_aoc_datasheet-1.pdf 1 2013-11-22 9:14:43

QSFP+ , 56 Gb/s, Active Optical Cable

OPISFP+56G0813EA4

For more information,

please contact: Communications@fci.com

or visit us at www.fci.com

Disclaimer

Please note that the above information is subject to change without notice.

Straight exit boot

01 1 OM2

05 5 OM2

10 10 OM2

15 15 OM2

20 20 OM2

30 30 OM3

50 50 OM3

C0 100 OM3

Orange

Aqua

MATERIALS

• Fiber cable:

• Helix based 8 fiber Multi-mode cable

• OFNP (Optical Fiber Non-conductive Plenum)

ELECTRICAL PERFORMANCE

• Power supply voltage: 3.3V

• Data rate per lane: 14 Gb/s

• Power consumption: 0.8W (typ.) per end

• Transmitter type: VCSEL

• Receiver type: PIN-diode

ENVIRONMENTAL

• RoHS 6/6 compliant

• Laser Class 1 / CDRH

• Operating temperature range: 0°C to 70°C

• Halogen free (optional)

SPECIFICATIONS

• Module meets MSA –Small Form Factors

SFF- 8436 (QSFP)

• Cable assembly supports Infiniband SDR, DDR,

QDR and FDR data rates

• Product Specification: GS-12-1059

CERTIFICATIONS & APPROVAL

• UL : E251142-A2

• TUV : DE2-015589

• FDA : 0820640-xxx

PACKAGING

• Blister reel up to 30 meter length

• Box beyond 30 meter length

TECHNICAL INFORMATION

PART NUMBERS

Part NumberDescription

Sufﬁx XX Cable Length (m) Category Colour

Cable LengthQSFP Transceiver #1 QSFP Transceiver #2

ICD056GVP163D-XX

CMY

130-qsfp+_56gbs_aoc_datasheet-2.pdf 1 2013-11-22 9:15:24

OPTICAL INTERCONNECT

TARGET MARKETS / APPLICATIONSFEATURES & BENEFITS

• Full Duplex 4 Channel 850nm Parallel Active Optical Cable

• Supports transmission rates up to 10.3 Gbit/s per channel

• QSFP-based modules at each cable end

• QSFP interfaces fully compliant to SFF- 8436

• Hot pluggable electrical interfaces

• QSFP-based module supports Rx Pre-Emphasis

• EEPROM-based Serial-ID, accessible through two-wire

Serial Interface

• Multi-channel 850nm VCSEL array

• Multi-channel PIN-detector array

• Helix type 8-fiber Multi-Mode Optical cable that allows

for bending in any direction

• Fire-resistant OFNP (optical Fiber Non-Conductive

Plenum) rated cable

• Low power QSFP module: 0.8 Watts (typ.) per end

• Power class 4

• 0°C to +70°C operating case temperature

• Laser Class 1 IEC/CDRH compliant

• Data Center

• High Performance Computing

• Switching

• Industrial

OVERVIEW

The FCI QSFP+ QDR, 40 Gb/s, Active Optical Cable series provides an

optical transmission based cost effective, high performance, plug &

play interconnect solution. The AOC features optical transceivers

inside both cable connectors enabling improved performance and

distance capability versus traditional copper assemblies.

The transceivers assure proper interoperability and provide

excellent link performance. The assembly is a full duplex, 4 channel

construction with each channel capable of transmitting data at

rates up to 10 Gb/s. Typical applications serve signal transmission

distances between 3m and 100m.

QSFP+ , 40 GB/S, ACTIVE OPTICAL CABLE

CMY

129-qsfp+_40gbs_aoc_datasheet-1.pdf 1 2013-9-12 9:12:43

QSFP+ , 40 GB/S, ACTIVE OPTICAL CABLE

OPISFP+40G0813EA4

For more information,

please contact: Communications@fci.com

or visit us at www.fci.com

Disclaimer

Please note that the above information is subject to change without notice.

Straight exit boot

01 1 OM2

05 5 OM2

10 10 OM2

15 15 OM2

20 20 OM2

30 30 OM3

50 50 OM3

C0 100 OM3

Orange

Aqua

MATERIALS

• Fiber cable:

• Helix based 8 fiber Multi-mode cable

• OFNP (Optical Fiber Non-conductive Plenum)

ELECTRICAL PERFORMANCE

• Power supply voltage: 3.3V

• Data rate per lane: 10 Gb/s

• Power consumption: 0.8 watts (typ.) per end

• Transmitter type: VCSEL

• Receiver type: PIN-diode

ENVIRONMENTAL

• RoHS 6/6 compliant

• Laser Class 1 / CDRH

• Operating temperature range: 0°C to 70°C

• Halogene free (optional)

SPECIFICATIONS

• Module meets MSA –Small Form Factors

SFF- 8436 (QSFP)

• Cable assembly supports Infiniband SDR, DDR and

QDR data rates

• Product Specification: GS-12-1065

CERTIFICATIONS & APPROVAL

• UL : E251142-A2

• TUV : DE2-015589

• FDA : 0820640-xxx

PACKAGING

• Blister reel up to 30 meter length

• Box beyond 30 meter length

TECHNICAL INFORMATION

PART NUMBERS

Part NumberDescription

Sufﬁx XX Cable Length (m) Category Colour

Cable LengthQSFP Transceiver #1 QSFP Transceiver #2

ICD040GVP163D-XX

CMY

129-qsfp+_40gbs_aoc_datasheet-2.pdf 1 2013-9-12 9:13:37