PMEG6002EJ,115 - NXP Semiconductors / Philips Semiconductors

1. Product proﬁle

1.1 General description

Planar Maximum Efﬁciency General Application (MEGA) Schottky barrier rectiﬁer with an

integrated guard ring for stress protection, encapsulated in a SOD323F (SC-90) small and

ﬂat lead Surface-Mounted Device (SMD) plastic package.

1.2 Features

nAverage forward current: IF(AV) ≤0.2 A

nReverse voltage: VR≤60 V

nLow forward voltage

nAEC-Q101 qualiﬁed

nSmall and ﬂat lead SMD plastic package

1.3 Applications

nLow voltage rectiﬁcation

nHigh efﬁciency DC-to-DC conversion

nSwitch Mode Power Supply (SMPS)

nReverse polarity protection

nUltra high-speed switching

nLow power consumption applications

1.4 Quick reference data

[1] Device mounted on a ceramic Printed-Circuit Board (PCB), Al2O3, standard footprint.

PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

Rev. 01 — 15 May 2009 Product data sheet

Table 1. Quick reference data

=25

C unless otherwise speciﬁed.

Symbol Parameter Conditions Min Typ Max Unit

IF(AV) average forward current square wave;

δ= 0.5;

f=20kHz

Tamb ≤130 °C[1] - - 0.2 A

Tsp ≤145 °C - - 0.2 A

VRreverse voltage - - 60 V

VFforward voltage IF= 0.2 A - 540 600 mV

IRreverse current VR= 60 V - 20 100 µA

Product data sheet Rev. 01 — 15 May 2009 2 of 13

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

2. Pinning information

[1] The marking bar indicates the cathode.

3. Ordering information

4. Marking

5. Limiting values

Table 2. Pinning

Pin Description Simpliﬁed outline Graphic symbol

1 cathode [1]

2 anode 21

sym001

Table 3. Ordering information

Type number Package

Name Description Version

PMEG6002EJ SC-90 plastic surface-mounted package; 2 leads SOD323F

Table 4. Marking codes

Type number Marking code

PMEG6002EJ 1P

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

VRreverse voltage Tj=25°C - 60 V

IF(AV) average forward current square wave;

δ= 0.5;

f=20kHz

Tamb ≤130 °C[1] - 0.2 A

Tsp ≤145 °C - 0.2 A

IFRM repetitive peak forward

current tp≤1 ms;

δ≤0.25 - 2.6 A

IFSM non-repetitive peak

forward current square wave;

tp=8ms [2] - 2.75 A

Ptot total power dissipation Tamb ≤25 °C[3][4] - 385 mW

[3][5] - 695 mW

[3][1] - 1045 mW

Product data sheet Rev. 01 — 15 May 2009 3 of 13

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

[1] Device mounted on a ceramic PCB, Al2O3, standard footprint.

[2] Tj=25°C prior to surge.

[3] Reﬂow soldering is the only recommended soldering method.

[4] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.

[5] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.

6. Thermal characteristics

[1] For Schottky barrier diodes thermal runaway has to be considered, as in some applications the reverse

power losses PR are a signiﬁcant part of the total power losses.

[2] Reﬂow soldering is the only recommended soldering method.

[3] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.

[4] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.

[5] Device mounted on a ceramic PCB, Al2O3, standard footprint.

[6] Soldering point of cathode tab.

Tjjunction temperature - 150 °C

Tamb ambient temperature −55 +150 °C

Tstg storage temperature −65 +150 °C

Table 5. Limiting values

…continued

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

Table 6. Thermal characteristics

Symbol Parameter Conditions Min Typ Max Unit

Rth(j-a) thermal resistance from

junction to ambient in free air [1][2]

[3] - - 325 K/W

[4] - - 180 K/W

[5] - - 120 K/W

Rth(j-sp) thermal resistance from

junction to solder point [6] --25K/W

Product data sheet Rev. 01 — 15 May 2009 4 of 13

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

FR4 PCB, standard footprint

Fig 1. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values

FR4 PCB, mounting pad for cathode 1 cm2

Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values

006aab476

10−51010−2

10−4102

10−1tp (s)

10−3103

102

103

Zth(j-a)

(K/W)

duty cycle =

10.75

0.5 0.33

0.25 0.2

0.1 0.05

0.02 0.01

006aab477

10−51010−2

10−4102

10−1tp (s)

10−3103

102

103

Zth(j-a)

(K/W)

duty cycle =

10.75

0.5 0.33

0.25 0.2

0.1 0.05

0.02 0.01

Product data sheet Rev. 01 — 15 May 2009 5 of 13

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

7. Characteristics

[1] When switched from IF= 10 mA to IR= 10 mA; RL= 100 Ω; measured at IR= 1 mA.

Ceramic PCB, Al2O3, standard footprint

Fig 3. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values

006aab478

10−51010−2

10−4102

10−1tp (s)

10−3103

102

103

Zth(j-a)

(K/W)

0.02

0.01

0.05

0.1

0.2

0.25

duty cycle =

10.75

0.5 0.33

Table 7. Characteristics

=25

C unless otherwise speciﬁed.

Symbol Parameter Conditions Min Typ Max Unit

VFforward voltage IF= 0.1 mA - 130 170 mV

IF= 1 mA - 190 230 mV

IF= 10 mA - 260 300 mV

IF= 100 mA - 420 470 mV

IF= 200 mA - 540 600 mV

IRreverse current VR=10V - 2 10 µA

VR=50V - 9 30 µA

VR= 60 V - 20 100 µA

Cddiode capacitance f=1MHz

VR= 1 V - 14 - pF

VR=10V -6-pF

trr reverse recovery time [1] -5-ns

Product data sheet Rev. 01 — 15 May 2009 6 of 13

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

(1) Tj= 150 °C

(2) Tj= 125 °C

(3) Tj=85°C

(4) Tj=25°C

(5) Tj=−40 °C

(1) Tj= 125 °C

(2) Tj=85°C

(3) Tj=25°C

(4) Tj=−40 °C

Fig 4. Forward current as a function of forward

voltage; typical values Fig 5. Reverse current as a function of reverse

voltage; typical values

f = 1 MHz; Tamb =25°C

Fig 6. Diode capacitance as a function of reverse voltage; typical values

006aab479

VF (V)

0 0.60.40.2

10−3

10−2

10−1

(A)

10−4

(1)

(2)

(3) (4) (5)

006aab480

VR (V)

0604020

10−2

10−3

10−4

10−5

10−6

10−7

10−8

(A)

10−9

(1)

(2)

(3)

(4)

VR (V)

0604020

006aab481

(pF)

Product data sheet Rev. 01 — 15 May 2009 7 of 13

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

Tj= 150 °C

(1) δ= 0.1

(2) δ= 0.2

(3) δ= 0.5

(4) δ=1

Tj= 125 °C

(1) δ=1

(2) δ= 0.9

(3) δ= 0.8

(4) δ= 0.5

Fig 7. Average forward power dissipation as a

function of average forward current; typical

values

Fig 8. Average reverse power dissipation as a

function of reverse voltage; typical values

FR4 PCB, standard footprint

Tj= 150 °C

(1) δ= 1; DC

(2) δ= 0.5; f = 20 kHz

(3) δ= 0.2; f = 20 kHz

(4) δ= 0.1; f = 20 kHz

FR4 PCB, mounting pad for cathode 1 cm2

Tj= 150 °C

(1) δ= 1; DC

(2) δ= 0.5; f = 20 kHz

(3) δ= 0.2; f = 20 kHz

(4) δ= 0.1; f = 20 kHz

Fig 9. Average forward current as a function of

ambient temperature; typical values Fig 10. Average forward current as a function of

ambient temperature; typical values

006aab482

IF(AV) (A)

0.0 0.30.20.1

0.10

0.05

0.15

0.20

PF(AV)

(W)

0.0

(1)

(2)

(3)

(4)

VR (V)

0403010 20

006aab483

0.10

0.05

0.15

0.20

PR(AV)

(W)

0.0

(1)

(2)

(4)

(3)

Tamb (°C)

0 50 100 150 1751257525

006aab484

0.1

0.2

0.3

IF(AV)

(A)

0.0

(1)

(2)

(3)

(4)

Tamb (°C)

0 50 100 150 1751257525

006aab485

0.1

0.2

0.3

IF(AV)

(A)

0.0

(1)

(2)

(3)

(4)

Product data sheet Rev. 01 — 15 May 2009 8 of 13

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

8. Test information

Ceramic PCB, Al2O3, standard footprint

Tj= 150 °C

(1) δ= 1; DC

(2) δ= 0.5; f = 20 kHz

(3) δ= 0.2; f = 20 kHz

(4) δ= 0.1; f = 20 kHz

Tj= 150 °C

(1) δ= 1; DC

(2) δ= 0.5; f = 20 kHz

(3) δ= 0.2; f = 20 kHz

(4) δ= 0.1; f = 20 kHz

Fig 11. Average forward current as a function of

ambient temperature; typical values Fig 12. Average forward current as a function of

solder point temperature; typical values

Tamb (°C)

0 50 100 150 1751257525

006aab486

0.1

0.2

0.3

IF(AV)

(A)

0.0

(1)

(2)

(3)

(4)

Tsp (°C)

0 50 100 150 1751257525

006aab487

0.1

0.2

0.3

IF(AV)

(A)

0.0

(1)

(2)

(3)

(4)

(1) IR=1mA

Input signal: reverse pulse rise time tr= 0.6 ns; reverse voltage pulse duration tp= 100 ns; duty cycle δ= 0.05

Oscilloscope: rise time tr= 0.35 ns

Fig 13. Reverse recovery time test circuit and waveforms

trr

(1)

+ IFt

output signal

trtpt

10 %

90 %

input signal

V = VR + IF × RS

RS = 50 ΩIF

D.U.T.

Ri = 50 Ω

SAMPLING

OSCILLOSCOPE

mga881

Product data sheet Rev. 01 — 15 May 2009 9 of 13

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

The current ratings for the typical waveforms as shown in Figure 9,10,11 and 12 are

calculated according to the equations: with IM deﬁned as peak current,

at DC, and with IRMS deﬁned as RMS current.

8.1 Quality information

This product has been qualiﬁed in accordance with the Automotive Electronics Council

(AEC) standard

Q101 - Stress test qualiﬁcation for discrete semiconductors

, and is

suitable for use in automotive applications.

9. Package outline

Fig 14. Duty cycle deﬁnition

006aaa812

duty cycle δ =

IFAV() IMδ×=

IRMS IFAV()

=IRMS IMδ×=

Fig 15. Package outline SOD323F (SC-90)

04-09-13Dimensions in mm

0.80

0.65

0.25

0.10

0.5

0.3

2.7

2.3 1.8

1.6

0.40

0.25

1.35

1.15

Product data sheet Rev. 01 — 15 May 2009 10 of 13

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

10. Packing information

[1] For further information and the availability of packing methods, see Section 14.

11. Soldering

Table 8. Packing methods

The indicated -xxx are the last three digits of the 12NC ordering code.

[1]

Type number Package Description Packing quantity

3000 10000

PMEG6002EJ SOD323F 4 mm pitch, 8 mm tape and reel -115 -135

Reﬂow soldering is the only recommended soldering method.

Fig 16. Reﬂow soldering footprint SOD323F (SC-90)

0.951.65

2.2

2.1

3.05

solder lands

solder resist

occupied area

solder paste

Dimensions in mm

0.5

(2×)

0.6

(2×)

0.6 (2×)0.5 (2×)

sod323f_fr

Product data sheet Rev. 01 — 15 May 2009 11 of 13

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

12. Revision history

Table 9. Revision history

Document ID Release date Data sheet status Change notice Supersedes

PMEG6002EJ_1 20090515 Product data sheet - -

Product data sheet Rev. 01 — 15 May 2009 12 of 13

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

13. Legal information

13.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term ‘short data sheet’ is explained in section “Deﬁnitions”.

[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.nxp.com.

13.2 Deﬁnitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modiﬁcations or additions. NXP Semiconductors does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liability for the consequences of

use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is intended

for quick reference only and should not be relied upon to contain detailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local NXP Semiconductors sales

ofﬁce. In case of any inconsistency or conﬂict with the short data sheet, the

full data sheet shall prevail.

13.3 Disclaimers

General — Information in this document is believed to be accurate and

reliable. However, NXP Semiconductors does not give any representations or

warranties, expressed or implied, as to the accuracy or completeness of such

information and shall have no liability for the consequences of use of such

information.

Right to make changes — NXP Semiconductors reserves the right to make

changes to information published in this document, including without

limitation speciﬁcations and product descriptions, at any time and without

notice. This document supersedes and replaces all information supplied prior

to the publication hereof.

Suitability for use — NXP Semiconductors products are not designed,

authorized or warranted to be suitable for use in medical, military, aircraft,

space or life support equipment, nor in applications where failure or

malfunction of an NXP Semiconductors product can reasonably be expected

to result in personal injury, death or severe property or environmental

damage. NXP Semiconductors accepts no liability for inclusion and/or use of

NXP Semiconductors products in such equipment or applications and

therefore such inclusion and/or use is at the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. NXP Semiconductors makes no

representation or warranty that such applications will be suitable for the

speciﬁed use without further testing or modiﬁcation.

Limiting values — Stress above one or more limiting values (as deﬁned in

the Absolute Maximum Ratings System of IEC 60134) may cause permanent

damage to the device. Limiting values are stress ratings only and operation of

the device at these or any other conditions above those given in the

Characteristics sections of this document is not implied. Exposure to limiting

values for extended periods may affect device reliability.

Terms and conditions of sale — NXP Semiconductors products are sold

subject to the general terms and conditions of commercial sale, as published

at http://www.nxp.com/proﬁle/terms, including those pertaining to warranty,

intellectual property rights infringement and limitation of liability, unless

explicitly otherwise agreed to in writing by NXP Semiconductors. In case of

any inconsistency or conﬂict between information in this document and such

terms and conditions, the latter will prevail.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from national authorities.

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

13.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks

are the property of their respective owners.

14. Contact information

For more information, please visit: http://www.nxp.com

For sales ofﬁce addresses, please send an email to: salesaddresses@nxp.com

Document status[1][2] Product status[3] Deﬁnition

Objective [short] data sheet Development This document contains data from the objective speciﬁcation for product development.

Preliminary [short] data sheet Qualiﬁcation This document contains data from the preliminary speciﬁcation.

Product [short] data sheet Production This document contains the product speciﬁcation.

NXP Semiconductors PMEG6002EJ

200 mA low VF MEGA Schottky barrier rectiﬁer

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

Date of release: 15 May 2009

Document identifier: PMEG6002EJ_1

Please be aware that important notices concerning this document and the product(s)

described herein, have been included in section ‘Legal information’.

15. Contents

1 Product proﬁle . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 General description. . . . . . . . . . . . . . . . . . . . . . 1

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1

2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2

3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2

4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2

6 Thermal characteristics. . . . . . . . . . . . . . . . . . . 3

7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 5

8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 8

8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 9

9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9

10 Packing information. . . . . . . . . . . . . . . . . . . . . 10

11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 11

13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 12

13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12

13.2 Deﬁnitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

14 Contact information. . . . . . . . . . . . . . . . . . . . . 12

15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13