1
Fuse holder FIZ
https://www.schurter.com /PG02
Fuses
Shock-Safe Fuseholder, 5 x 20 mm, Slotted Cap, 4 W / 16 A, IP 40 / IP 67
See below:
Approvals and Compliances
250 VAC · 4 W / 16 A (VDE) · 600 VAC/DC · 30 A (UL/CSA)
Description
- Screw type fuse carrier
Unique Selling Proposition
- Fuseholder with high rated power acceptance
- Panel thikness up to 10mm
Weblinks
pdf datasheet, html-datasheet, General Product Information, Packaging
details, Distributor-Stock-Check, Accessories, Detailed request for
product, Microsite
Technical Data
Shock-Safe Category PC2
Fuse-Link 5 x 20 mm
Mounting Panel mount, Front Side
Attachment Fixing Nut
Terminal Solder or Quick-Connect 6.3 x 0.8 mm
Rated Voltage 250 VAC (VDE), 600 VAC/DC (UL/CSA)
Rated current 16 A (VDE), 30 A (UL/CSA)
Rated Power Acceptance IEC 4 W / 16 A @ Ta 23 °C
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Degree of Protection IP 40 / IP 67
Protection Class Suitable for appliances with protection
class I acc. to IEC 61140
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category 40/085/21 acc. to IEC 60068-1
Material: Socket Thermoset, black, UL 94V-0
Material: Terminals Tin-Plated Copper
Unit Weight 30 g
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Product Marking , Type, Rated Voltage, Rated current,
Certification marks
Soldering Methods Iron
Soldering Profile
Solderability 350 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 2
Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 2
Contact Resistance ≤ 10 mΩ at 20 mV acc. to IEC 60127-6
Dielectric Strength > 3 kV
> 4 kV between life parts
(50 Hz: 1 min)
Impulse Withstand Voltage > 4 kV between life parts
> 6 kV between life parts
Insulation Resistance > 10 MΩ between life parts
> 100 MΩ between life parts
(500 VDC: 1 min)
Overvoltage Category III acc. to IEC 60664-1
Pollution Degree 3 acc. to IEC 60664-1
Admissible Torque on Fixing
Nut
max 1.2 Nm
Panel Thickness max 10 mm
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: FIZ
Approval Logo Certificates Certification Body Description
VDE Approvals VDE VDE Certificate Number:
UL Approvals UL UL File Number: E39328
Product standards
Product standards that are referenced
2
Fuse holder
FIZ https://www.schurter.com /PG02
Fuses
Organization Design Standard Description
Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to UL 4248-1 Fuseholder general requirements
Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technology equipment.
Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the en-
hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG EU Directive RoHS 2011/65/EU
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
White paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-12 and -13.
Dimension [mm] 52 mm
8.5
max. 10
4SW 22
ø 22
52
1.8
±0.5
M18.5x2/2
Variants 0031.2203, 0031.2207
8.5
max. 10
4.6SW 22
ø 22
52
1.8
±0.5
M18.5x2/2
Variants 0031.2201 und 0031.2205
19
0
-0.1
18.7
17.8
±0.1
Mounting holes
3
Fuse holder FIZ
https://www.schurter.com /PG02
Fuses
Derating Curves
Admissible Power Acceptance in Watt
020406080 100
0.5
0.0
I = << In
I = 0.7 In
I = 1.0 In
4.0
1.5
1.0
2.0
3.0
2.5
3.5
Ambient Air Temperature Ta °C
All Variants
Holder Cap Terminal Degree of Pro-
tection
Order Number
lslotted Solder IP 67 0031.2201 █
lslotted Quick-Connect 6.3 x 0.8 mm IP 67 0031.2205 █
lslotted Solder IP 40 0031.2203 █
lslotted Quick-Connect 6.3 x 0.8 mm IP 40 0031.2207 █
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-
Check-SCHURTER
Packaging Unit Bulk (25 pcs.)
Accessories
Description
Cover FIZ, FUL
Insulation Cover for FIZ, FUL,FUS
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
17.10.2018
