RFP15N05L, RFP15N06L Data Sheet July 1999 15A, 50V and 60V, 0.140 Ohm, Logic Level N-Channel Power MOSFETs These are N-Channel enhancement mode silicon gate power field effect transistors designed for applications such as switching regulators, switching converters, motor drivers, relay drivers and drivers for high power bipolar switching transistors requiring high speed and low gate drive power. These types can be operated directly from integrated circuits. File Number Features * 15A, 50V and 60V * rDS(ON) = 0.140 * Design Optimized for 5V Gate Drives * Can be Driven from QMOS, NMOS, TTL Circuits * Compatible with Automotive Drive Requirements * SOA is Power Dissipation Limited Formerly developmental type TA0522. * Nanosecond Switching Speeds Ordering Information * Linear Transfer Characteristics PART NUMBER PACKAGE BRAND RFP15N05L TO-220AB RFP15N05L RFP15N06L TO-220AB RFP15N06L NOTE: When ordering, use the entire part number. 1558.3 * High Input Impedance * Majority Carrier Device * Related Literature - TB334 "Guidelines for Soldering Surface Mount Components to PC Boards" Symbol D G S Packaging JEDEC TO-220AB DRAIN (TAB) 6-229 SOURCE DRAIN GATE CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD Handling Procedures. http://www.intersil.com or 407-727-9207 | Copyright (c) Intersil Corporation 1999 RFP15N05L, RFP15N06L Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified Drain to Source Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDSS Drain to Gate Voltage (RGS = 20k) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Above TC = 25oC, Derate Linearly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TJ, TSTG Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg RFP15N05L 50 50 15 40 10 60 0.48 -55 to 150 RFP15N06L 60 60 15 40 10 60 0.48 -55 to 150 UNITS V V A A V W W/oC oC 300 260 300 260 oC oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. TJ = 25oC to 125oC. Electrical Specifications TC = 25oC, Unless Otherwise Specified PARAMETER MIN TYP MAX UNITS RFP15N05L 50 - - V RFP15N06L 60 - - V VGS = VDS, ID = 250A (Figure 7) 1 - 2 V VDS = 48V, VDS = 50V - - 1 A - - 50 A VGS = 10V, VDS = 0V - - 100 nA ID = 15A, VGS = 5V (Figures 5, 6) - - 0.140 VDS = 25V, VGS = 0V, f = 1MHz (Figure 8) - - 900 pF Drain to Source Breakdown Voltage Gate Threshold Voltage SYMBOL BVDSS VGS(TH) Zero Gate Voltage Drain Current IDSS TEST CONDITIONS ID = 250A, VGS = 0V VDS = 48V, VDS = 50V Gate to Source Leakage Current Drain to Source On Resistance (Note 2) IGSS rDS(ON) TC = 125oC Input Capacitance CISS Output Capacitance COSS - - 450 pF Reverse-Transfer Capacitance CRSS - - 200 pF Turn-On Delay Time td(ON) - 16 40 ns tr - 250 325 ns td(OFF) - 200 325 ns VGS = 5V - 225 325 ns RFP15N05L, RFP15N06L - - 2.083 oC/W MIN TYP MAX UNITS ISD = 7.5A - - 1.4 V ISD = 4A, dISD/dt = 100A/s - 225 - ns Rise Time Turn-Off Delay Time Fall Time tf RJC VDD = 30V, ID = 7.5A, RG = 6.25 (Figures 10, 11) Source to Drain Diode Specifications PARAMETER Source to Drain Diode Voltage (Note 2) Diode Reverse Recovery Time SYMBOL VSD trr TEST CONDITIONS NOTE: 2. Pulsed: pulse duration = 300s maximum, duty cycle = 2%. 3. Repititive rating: pulse width limited by maximum junction temperature. 6-230 RFP15N05L, RFP15N06L Typical Performance Curves Unless Otherwise Specified 100 TC = 25oC 0.8 0.6 0.4 ID MAX CONTINUOUS DC 10 0 50 100 AT I 1 RFP15N05L 0 150 FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE 1 RFP15N06L 10 100 VDS, DRAIN SOURCE VOLTAGE (V) 1000 FIGURE 2. FORWARD BIAS SAFE OPERATING AREA 40 16 PULSE DURATION = 80s DUTY CYCLE 0.5% MAX TC = 25oC VGS = 7.5V IDS, DRAIN TO SOURCE CURRENT IDS, DRAIN TO SOURCE CURRENT (A) ON OPERATION IN THIS AREA IS LIMITED BY rDS(ON) TC, CASE TEMPERATURE (oC) 30 VGS = 5V VGS = 10V VGS = 4.5V 20 VGS = 4V VGS = 3.5V 10 VGS = 3V VGS = 2.5V VGS = 2V 0 0 1 2 3 4 VDS, DRAIN TO SOURCE VOLTAGE (V) 5 VDS = 10V PULSE DURATION = 80s DUTY CYCLE 0.5% MAX 14 -40oC 10 25oC 8 6 4 2 0 125oC 0 -40oC 1 2 3 4 VGS, GATE TO SOURCE VOLTAGE (V) 5 FIGURE 4. TRANSFER CHARACTERISTICS 2.0 0.3 NORMALIZED DRAIN TO SOURCE ON RESISTANCE VGS = 5V PULSE DURATION = 80s DUTY CYCLE 0.5% MAX 0.2 TC = 125oC 25oC 0.1 -40oC 0 125oC 12 FIGURE 3. SATURATION CHARACTERISTICS ON RESISTANCE () OP ER 0.2 0 rDS(ON), DRAIN TO SOURCE CURVES MUST BE DERATED LINEARLY WITH INCREASE IN TEMPERATURE 1.0 ID, DRAIN CURRENT (A) POWER DISSIPATION MULTIPLIER 1.2 0 2 4 6 8 10 12 ID, DRAIN TO SOURCE CURRENT (A) 14 16 FIGURE 5. DRAIN TO SOURCE ON RESISTANCE vs DRAIN CURRENT 6-231 VGS = 10V, ID = 15A PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 1.5 1 0.5 0 -50 0 50 100 150 TJ, JUNCTION TEMPERATURE (oC) FIGURE 6. NORMALIZED DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE 200 RFP15N05L, RFP15N06L Typical Performance Curves Unless Otherwise Specified (Continued) 1600 1.4 VGS = 0V, f = 1MHz CISS = CGS + CGD CRSS = CGD COSS CDS + CGD 1400 ID = 250A 1200 C, CAPACITANCE (pF) 1.2 1 0.8 1000 CISS 800 600 COSS 400 CRSS 200 0.6 -50 0 0 50 100 150 TJ, JUNCTION TEMPERATURE (oC) 200 FIGURE 7. NORMALIZED GATE THRESHOLD VOLTAGE vs JUNCTION TEMPERATURE 0 10 20 30 40 VDS, DRAIN TO SOURCE VOLTAGE (V) FIGURE 8. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE 10 60 DRAIN TO SOURCE VOLTAGE (V) 50 RL = 4 IG(REF) = 0.5mA VGS = 5V BVDSS 45 8 GATE SOURCE VOLTAGE VDD = BVDSS 30 6 VDD = BVDSS 4 0.75BVDSS 0.50BVDSS 0.25BVDSS 15 2 DRAIN SOURCE VOLTAGE 0 GATE TO SOURCE VOLTAGE (V) NORMALIZED GATE THRESHOLD VOLTAGE VGS = VDS 0 20 IG (REF) IG (ACT) 80 t, TIME (s) IG (REF) IG (ACT) NOTE: Refer to Intersil Application Notes AN7254 and AN7260. FIGURE 9. NORMALIZED SWITCHING WAVEFORMS FOR CONSTANT GATE CURRENT Test Circuits and Waveforms tON tOFF td(ON) td(OFF) tf tr RL VDS 90% 90% + RG - VDD 10% 10% 0 DUT 90% VGS VGS 0 FIGURE 10. SWITCHING TIME TEST CIRCUIT 6-232 10% 50% 50% PULSE WIDTH FIGURE 11. RESISTIVE SWITCHING WAVEFORMS RFP15N05L, RFP15N06L Test Circuits and Waveforms (Continued) VDS VDD RL Qg(TOT) VDS VGS = 10V VGS Qg(5) + VDD DUT VGS = 5V VGS - VGS = 1V IG(REF) 0 Qg(TH) IG(REF) 0 FIGURE 12. GATE CHARGE TEST CIRCUIT FIGURE 13. GATE CHARGE WAVEFORMS All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (407) 724-7000 FAX: (407) 724-7240 6-233 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029