8 THIS DRAWING 1S UNPUBLISHED. RELEASED FOR PUBLICATION 19 CC) copyriGHt 20 BY TYCO ELECTRONICS CORPORATION, ALL RIGHTS RESERVED. A, js 6] | 440.5 [2,414.02] I { : ( [> 63.9740.5 [2,524.02] 135.08 [5.20] REF V ! . AX HOUS ING BRACKET PAD 2 REQUIRED 123. 4440.5 [4,864.02] iN 30.6140. 12 , se CAA EA <Z a ! mm 10.9540. 12 (431.005) 34.9340. 12 [1.375+.005] 95.0/740.12 [3.7434+.005] 99.5640.12 [2.3454+.005] On -)MO YR /\ PROTECTIVE CAP U mA BRACKET THUMB SCREW 6-19 SELF-TAPPING 4 REQUIRED SCREW LOC HM DIST 00 REVISIONS LTR DESCRIPTION DATE DWN APVD /\ MATERIAL: HOUSING AND COVER - POLYCARBONATE ASSEMBLY PROCEDURE: C REV-EC 0B40-0176-04 12AUG2004 | LH | SM D REV-EC 0B40-0192-04 12AUG2004 | LH | LS E REV; ECO-09-019614 28AUG62009 | JB | SJ MOLDING COMPOUND, SEE TABLE FOR COLOR. BRACKET - BLACK OXIDE COATED CARBON STEEL. CABLE TIE - NYLON NOT SHOWN ) STRAIN RELIEF STRIP - ABS MOLDING COMPOUND, FLAME RETARDED, BLACK. 6-19 SCREWS - ZINC PLATED STEEL, BLACK. THUMB SCREW - BLACK ZINC PLATED CARBON STEEL WITH A BLACK ABS MOLDED KNOB. PROTECTIVE CAP - VINYL, BLACK. BRACKET PAD - ADHESIVE BACKED RUBBER, 94V-O RATED. BLACK. FOR ADDITIONAL INSTRUCTION SHEET 408-4508. INFORMATION SEE KIT |S SHOWN ASSEMBLED BUT A POLYBAG. IS SHIPPED LOOSE IN PART NUMBER SHALL BE OF COVER WHERE INDICATED. NUMBER. INK STAMPED ON BACK SEE TABLE FOR PART DIMENSIONS SHOWN [] ARE IN INCHES, IN BRACKETS REMOVAL OF PROTECTIVE CAP BEFORE IS OPTIONAL. INSTALLATION RECOMMENDED FLEXMODE PLATES PART NUMBER: 998106 2 PORT 998107 3 PORT (A) TERMINATE SELECTED TELEPHONE/DATA CABLE TO JACK. (B) SNAP SELECTED JACKS HOUSING. (C) SNAP SELECTED FLEXMODE WITH JACKS INTO HOUSING. (D) USE SUPPLIED CABLE TIE AND ATTACH TO LOOP IN HOUSING OR SELECT THE CORRECT STRAIN RELIEF. STRAIN RELIEF STRIP ACCOMODATES THE FOLLOWING CABLE SIZES: |: .035 - .062 THICK Xx CABLE 2: .14 - INTO FLEXMODE .00 WIDE FLAT .24 DIAMETER ROUND CABLE. 3: .24 - .34 DIAMETER ROUND CABLE. E) PLACE BRACKET IN PLACE IN HOUSING, (F) ASSEMBLE COVER AND BRACKET TO HOUSING. G) SECURE COVER AND BRACKET TO HOUSING WITH 4 SCREWS PROVIDED. BLACK |116360-3 COLOR PART NUMBER THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT I$ SUBJECT TO CHANGE AN D THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. L. SMITH 24JUL98 zy AMP Incorporated DIMENSIONS: mml INCHES ] o TOL OTHER 0 PLC | PLC 2 PLC 3 PLC 4 PLC ANGLES WISE ERANCES UNLESS SPECIFIED: HE EE 4+- CHK L. SMITH 28AUG98 Electronics Harrisburg, PA 17105-3608 APVD JERRY KILPATRICK 28AUG98 | NAME PRODUCT SPEC KIT, FLEXMODE,DATA MONUMENT APPLICATION SPEC SIZE CAGE CODE | DRAWING NO RESTRICTED TO MATERIAL LN FINISH A\ WEIGHT A |} 00779 (G=1116360 - CUSTOMER DRAWING SCALE a: | SHEET OF REV | E AMP 4805 REV 31MAR2000 Pro/ENGINEER DRAWING