SPECIFICATION CONTROL DRAWING Product Revision Product Name Ident. Code SO96-1-01-100 A SO961R SO96-2-01-100 A SO962R SO96-3-01-100 A SO963R SO96-4-01-100 A SO964R SO96-5-01-100 A SO965R Component Dimensions oB oC L1.75 min min (L0.07) 16.5 (0.650) 16.5 (0.650) 16.5 (0.650) 19.7 (0.775) 19.7 (0.775) 1.90 (0.070) 2.65 (0.105) 4.30 (0.170) 5.95 (0.235) 7.00 (0.277) 2.65 (0.105) 3.55 (0.140) 5.00 (0.195) 6.45 (0.255) 7.6 (0.300) Shall Accommodate Cable with Dimensions oE oF oD max min max H min 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 2.65 (0.105) 3.55 (0.140) 5.00 (0.195) 6.45 (0.255) 7.6 (0.300) 0.90 (0.035) 1.40 (0.055) 2.15 (0.085) 3.30 (0.130) 4.30 (0.170) 1.9 (0.075) 2.65 (0.105) 4.30 (0.170) 5.95 (0.235) 7.00 (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn96 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. THERMAL INDICATOR: color change orange to colorless. 3. MELTABLE RINGS: Stabilized thermoplastic. Color:blue. 4. PRE-INSTALLED BRAID: Nickel plated copper strands. CMA 640. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 150C minimum, meeting the dimensional criteria listed, having nickel plated shields. 2. Temperature range: -55C to +175C. Install using Raychem-approved convection or infrared heating tools in accordance with Raychem process standard RCPS-100-70. Infrared tools are not recommended for use with black jackets. For best results, prepare the cable as shown: * A trademark of Raychem Corporation. Raychem THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A TITLE: SOLDERSLEEVE* DEVICE SHIELD TERMINATION WITH BRAID HIGH TEMPERATURE DOCUMENT NO.: SO96-X-01-100 DCR NUMBER: REPLACES: D981095 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 06/29/98 SEE TABLE 1 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None SO9601 SIZE: A SHEET: 1 of 1