SPECIFICATION CONTROL DRAWING
Raychem THERMOFIT
DEVICES Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE: SOLDERSLEEVE* DEVICE
SHIELD TERMINATION WITH BRAID
HIGH TEMPERATURE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: SO96-X-01-100
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D981095 REPLACES:
SO9601
DRAWN BY:
M. FORONDA DATE: 06/29/98 PROD. REV.
SEE TABLE DOC ISSUE:
1 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Component Dimensions Shall Accommodate Cable with Dimensions
Product
Name Ident.
Code L±1.75
(L±0.07) øB
min øC
min H
min øE
max øF
min øD
max
SO96-1-01-100 A SO961R 16.5
(0.650) 1.90
(0.070) 2.65
(0.105) 8.25
(0.325) 2.65
(0.105) 0.90
(0.035) 1.9
(0.075)
SO96-2-01-100 A SO962R 16.5
(0.650) 2.65
(0.105) 3.55
(0.140) 8.25
(0.325) 3.55
(0.140) 1.40
(0.055) 2.65
(0.105)
SO96-3-01-100 A SO963R 16.5
(0.650) 4.30
(0.170) 5.00
(0.195) 8.25
(0.325) 5.00
(0.195) 2.15
(0.085) 4.30
(0.170)
SO96-4-01-100 A SO964R 19.7
(0.775) 5.95
(0.235) 6.45
(0.255) 8.25
(0.325) 6.45
(0.255) 3.30
(0.130) 5.95
(0.235)
SO96-5-01-100 A SO965R 19.7
(0.775) 7.00
(0.277) 7.6
(0.300) 8.25
(0.325) 7.6
(0.300) 4.30
(0.170) 7.00
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn96 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
THERMAL INDICATOR: color change orange to colorless.
3. MELTABLE RINGS: Stabilized thermoplastic. Color:blue.
4. PRE-INSTALLED BRAID: Nickel plated copper strands. CMA 640.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 150°C minimum, meeting the
dimensional criteria listed, having nickel plated shields.
2. Temperature range: -55°C to +175°C.
Install using Raychem-approved convection or infrared heating tools in accordance with Raychem process standard RCPS-100-70.
Infrared tools are not recommended for use with black jackets.
For best results, prepare the cable as shown:
* A trademark of Raychem Corpor ation.
