DATASHEET MK3807-01 BUFFER/CLOCK DRIVER Description Features The MK3807-01 is a low skew 3.3 V, 1 to 10 fanout buffer. The large fanout from a single input line reduces loading on the input clock. The TTL level outputs reduce noise levels on the part. Typical applications are clock and signal distribution. * * * * Packaged in 20-pin SSOP Pb (lead) free package 1 to 10 fanout buffer Maximum skew between outputs of same package 0.35 ns * Maximum skew between outputs of different packages 0.75 ns * * * * * Max propagation delay of 3.8 ns Operating voltage of 3.3 V Advanced, low power, CMOS process Industrial temperature range -40 C to +85 C Hysteresis on all inputs Block Diagram CLK1 CLK2 CLK3 CLK4 IN CLK5 CLK6 CLK7 CLK8 CLK9 CLK10 IDTTM BUFFER/CLOCK DRIVER 1 MK3807-01 REV G 051310 MK3807-01 BUFFER/CLOCK DRIVER FAN OUT BUFFER Pin Assignment IN 1 20 VDD GND 2 19 CLK10 CLK1 3 18 CLK9 VDD 4 17 GND CLK2 5 16 CLK8 GND 6 15 VDD CLK3 7 14 CLK7 VDD 8 13 GND CLK4 9 12 CLK6 GND 10 11 CLK5 20 pin SSOP Pin Descriptions Pin Number Pin Name Pin Type Pin Description 1 IN Input Clock input. 2 GND Power Connect to ground. 3 CLK1 Output Clock output. 4 VDD Power Connect to +3.3 V. 5 CLK2 Output Clock output. 6 GND Power Connect to ground. 7 CLK3 Output Clock output. 8 VDD Power Connect to +3.3 V. 9 CLK4 Output Clock output. 10 GND Power Connect to ground. 11 CLK5 Output Clock output. 12 CLK6 Output Clock output. 13 GND Power Connect to ground. 14 CLK7 Output Clock output. 15 VDD Power Connect to +3.3 V. 16 CLK8 Output Clock output. 17 GND Power Connect to ground. 18 CLK9 Output Clock output. 19 CLK10 Output Clock output. 20 VDD Power Connect to +3.3 V. IDTTM BUFFER/CLOCK DRIVER 2 MK3807-01 REV G 051310 MK3807-01 BUFFER/CLOCK DRIVER FAN OUT BUFFER External Components PCB Layout Recommendations The MK3807-01 requires a minimum number of external components for proper operation. For optimum device performance and lowest output phase noise, the following guidelines should be observed. Decoupling Capacitors 1) The 0.01F decoupling capacitors should be mounted on the component side of the board as close to the VDD pins as possible. No vias should be used between the decoupling capacitors and VDD pins. The PCB trace to VDD pin should be kept as short as possible, as should the PCB trace to the ground via. Decoupling capacitors of 0.01F must be connected between VDD and GND, as close to these pins as possible. For optimum device performance, the decoupling capacitors should be mounted on the component side of the PCB. Avoid the use of vias in the decoupling circuit. 2) To minimize EMI, the 33 series termination resistor, (if needed) should be placed close to the clock output. Series Termination Resistor When the PCB trace between the clock outputs and the loads are over 1 inch, series termination should be used. To series terminate a 50 trace (a commonly used trace impedance) place a 33 resistor in series with the clock line, as close to the clock output pin as possible. The nominal impedance of the clock output is 20. Absolute Maximum Ratings Stresses above the ratings listed below can cause permanent damage to the MK3807-01. These ratings, which are standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. Item Rating Supply Voltage, VDD 7V All Inputs and Outputs -0.5 V to VDD+0.5 V Ambient Operating Temperature -40 to +85 C Storage Temperature -65 to +150 C Junction Temperature 125 C Soldering Temperature 260 C Recommended Operation Conditions Parameter Min. Ambient Operating Temperature -40 Power Supply Voltage (measured in respect to GND) IDTTM BUFFER/CLOCK DRIVER Typ. 3 +3.135 +3.3 Max. Units +85 C +3.465 V MK3807-01 REV G 051310 MK3807-01 BUFFER/CLOCK DRIVER FAN OUT BUFFER DC Electrical Characteristics Unless stated otherwise, VDD = 3.3 V 5%, Ambient Temperature -40 C to +85 C Parameter Symbol Operating Voltage VDD Quiescent Power Supply Current ICC Conditions Min. Typ. Max. Units 3.135 3.3 3.465 V VCC=Max VIN=GND or VCC 3 30 A VCC=Max VIN=@TTL HIGH (VCC-0.6 V) 2.0 300 A Input High Voltage VIH High Level Input pins 2 5.5 V Input Low Voltage VIL Low Level Input pins -0.5 0.8 V Output High Voltage VOH VCC=min VIN=VIH or VIL IOH = -0.1 mA, IOH = -8 mA Output Low Voltage VOL IOS VCC=Max, VOUT=GND Input Capacitance CIN VIN=0V, Note1 Input Hysteresis COUT V 3.0 VCC=min VIN=VIH or VIL IOL= -0.1 mA, IoL=16 mA IoL=24 mA Short Circuit Current Output Capacitance VDD-0.2 2.4 VOUT=0V, Note1 VH -60 0.2 0.4 0.5 V -135 -240 mA 5 6.0 pF 5.5 8.0 pF 150 mV Note1: This parameter is not tested. IDTTM BUFFER/CLOCK DRIVER 4 MK3807-01 REV G 051310 MK3807-01 BUFFER/CLOCK DRIVER FAN OUT BUFFER AC Electrical Characteristics Unless stated otherwise, VDD = 3.3 V 5%, Ambient Temperature -40 C to +85 C Parameter Symbol Skew between outputs of same package tsk9=(0) CL=50 pF, RL=500 0.35 ns tsk(p) CL=50 pF, RL=500 0.35 ns tpLH/tpHL CL=50 pF, RL=500 3.8 ns Skew between outputs of different package at same power supply, temperature and speed grade tsk(t) CL=50 pF, RL=500 0.75 ns Output Rise Time 0.8 V to 2.0 V tr(o) CL=50 pF, RL=500 1.5 ns Output Fall Time 2.0 V to 0.8 V tf(o) CL=50 pF, RL=500 1.5 ns Duty Cycle Measured at VDD/2 DC CL=50 pF, RL=500 45 55 % 1 100 MHz Skew between opposite transitions of same output Propagation Delay IN to ON Conditions Test Frequency IDTTM BUFFER/CLOCK DRIVER 5 Min. 1.5 Typ. Max. Units MK3807-01 REV G 051310 MK3807-01 BUFFER/CLOCK DRIVER FAN OUT BUFFER Package Outline and Package Dimensions (20 pin SSOP, 150Mil. Body) Package dimensions are kept current with JEDEC Publication No. 95 Millimeters 20 Symbol E1 A A1 A2 b C D E E1 e L E INDEX AREA 1 2 D Min Inches* Max 1.35 1.75 0.10 0.25 -1.50 0.20 0.30 0.18 0.25 8.55 8.75 5.80 6.20 3.80 4.00 0.635 Basic 0.40 1.27 0 8 Min Max .053 .069 .0040 .010 -.059 0.008 0.012 .007 .010 .337 .344 .228 .244 .150 .157 0.025 Basic .016 .050 0 8 *For reference only. Controlling dimensions in mm. A 2 A A 1 c -Ce b SEATING PLANE L .10 (.004) C Ordering Information Part / Order Number Marking Shipping Packaging Package Temperature MK3807-01RILF 3807-01RILF Tubes 20-pin SSOP -40 to +85 C MK3807-01RILFTR 3807-01RILF Tape and Reel 20-pin SSOP -40 to +85 C "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDTTM BUFFER/CLOCK DRIVER 6 MK3807-01 REV G 051310 MK3807-01 BUFFER/CLOCK DRIVER FAN OUT BUFFER Innovate with IDT and accelerate your future networks. Contact: www.IDT.com For Sales For Tech Support 800-345-7015 408-284-8200 Fax: 408-284-2775 www.idt.com/go/clockhelp Corporate Headquarters Integrated Device Technology, Inc. www.idt.com (c) 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA