SNAP-CDBBDIN - OPTO 22 - Datasheet.Directory

SNAP TEX Mounting/Wiring

Tools and Spare Parts

PAGE

DATA SHEET

Form 1772-141031

SNAP TEX Mounting/Wiring Tools and Spare Parts

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2008–2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Features

Securely mount SNAP I/O racks, controllers, and power

supplies to DIN rails

Easily jumper 4-channel digital I/O modules

Commission high-density digital modules

Replace lost or damaged parts

Use legacy and current brains and mounting racks

together

Description

SNAP TEX mounting and wiring tools and spare parts are

all part of the SNAP TEX family of wiring and mounting

accessories. The parts in this data sheet are used for:

•Securely mounting SNAP I/O racks, controllers, power

supplies, and other devices on DIN rails

•Wiring and commissioning SNAP I/O modules

•Replacing lost or damaged parts

•Adapting legacy parts to newer SNAP PAC parts

For cables and breakout boards in the SNAP TEX family,

see form #1756, the SNAP TEX Cables and Breakout Boards

Data Sheet.

DIN-Rail Mounting Clips and Kits

Opto 22 SNAP I/O mounting racks, controllers, power

supplies, breakout boards, etc. can be panel mounted or

DIN-rail mounted. For DIN-rail mounting, these clips and

kits adapt the bottom of the hardware to attach securely

to DIN rails.

Choose the kit or clips you need based on the table on

page 2.

Operator Interface for SNAP HDD Modules

The OptoTerminal-G20 makes it easier to commission

and troubleshoot SNAP high-density digital (HDD)

modules such as the SNAP-IAC-16 and the SNAP-ODC-

32-SRC.

The OptoTerminal-G20 displays the status of a high-

density digital module’s points on a two-line LCD display

and can also be used to turn output points on and off.

See Opto 22 form 1547, the SNAP High-Density Digital

Modules User’s Guide, for more details.

SNAP TEX Family

Part Numbers

Part Description

Rack Accessories

SNAP-PSDIN DIN-rail adapter kit for most SNAP power

supplies and controllers

SNAP-PSUDIN DIN-rail adapter kit for large-footprint SNAP

power supplies

SNAP-ROKDIN DIN-rail adapter kit for SNAP-PAC-SRA or

SNAP-RPSW

SNAP-S2DIN DIN-rail adapter kit for SNAP-PAC-S2

SNAP-LCM4DIN DIN-rail adapter kit for SNAP-LCM4

SNAP-CDBBDIN DIN-rail adapter kit for classic digital brain

boards (E1, B1, B5, B100)

SNAP-TEX-DRC10 SNAP PAC rack DIN-rail adapter clip,

10-pack

SNAP-TEX-RCKCAP SNAP PAC rack connector cap, pack of 16

SNAP-TEX-REC10N Narrow end cap for SNAP PAC racks DIN-rail

assemblies, 10-pack

SNAP-TEX-REC10W Wide end cap for SNAP PAC racks DIN-rail

assemblies, 10-pack

Other Tools and Parts

OPTOTERMINAL-G20 Operator interface for commissioning SNAP

high-density digital modules

SNAP-STRAPB Pack of 10 jumper straps for digital SNAP I/O

modules

SNAP-STRAP-OMR Jumper strap for SNAP-OMR6 modules

SNAP-WIRESTRAPB Pack of 10 jumper connectors for digital

SNAP I/O modules

SNAP-MODTOOL SNAP I/O module removal tool, 10-pack

SNAP-FIELDCONB SNAP module field connector, 10-pack

SNAP-RCK-B2M Adapter for using legacy SNAP brain on

SNAP PAC or M-series racks

SNAP-RCK-M2B Adapter for u sing SNAP PAC or SNAP M

brains on SNAP B-series racks

SNAP-MR10 Mechanical relay replacement for breakout

boards, 10 A

SNAP TEX Mounting/Wiring Tools and Spare Parts

PAGE

DATA SHEET

Form 1772-141031

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

DIN-Rail Clips and Kits

For these SNAP products Clips needed Use this adapter clip Use this end cap

Power Supplies

SNAP-PS5

SNAP-PS24 SNAP-PS5-24DC 1 kit SNAP-PSDIN N/A

SNAP-PS5U SNAP-PS24U 1 kit SNAP-PSUDIN N/A

Controllers

SNAP-PAC-S1

SNAP-PAC-S1-W SNAP-PAC-S1-FM 1 kit SNAP-PSDIN N/A

SNAP-PAC-S2 SNAP-PAC-S2-W 1 kit SNAP-S2DIN N/A

Mounting Racks

SNAP-PAC-RCK4 SNAP-PAC-RCK4-FM 2 clips

SNAP-TEX-DRC10*

(10 clips in package)

SNAP-TEX-REC10W*

(10 in package; use 2

per rack)

SNAP-PAC-RCK8

SNAP-PAC-RCK8-FM SNAP-PAC-RCK12

SNAP-PAC-RCK12-FM 3 clips

SNAP-PAC-RCK16 SNAP-PAC-RCK16-FM 4 clips

Breakout Boards

SNAP-TEX-MR10-4 2 clips SNAP-TEX-DRC10*

(10 clips in package)

SNAP-TEX-REC10W*

(10 in package; use 2

per rack)

SNAP-TEX-MR10-16 SNAP-TEX-MR10-16C 3 clips

SNAP-AIMA-HDB

SNAP-AIMA-HDB-FM

SNAP-AIV-HDB

SNAP-AIV-HDB-FM

SNAP-IDC-HDB

SNAP-IDC-HDB-FM

SNAP-TEX-32

SNAP-TEX-FB16-H

SNAP-TEX-FB16-L

2 clips SNAP-TEX-DRC10*

(10 clips in package)

SNAP-TEX-REC10N*

(10 in package; use 2

per board)

SNAP-ODC-HDB

SNAP-ODC-HDB-FM SNAP-SCM-BB4 3 clips

Other SNAP Devices

SNAP-PAC-SRA SNAP-RPSW 1 kit SNAP-ROKDIN N/A

* Requires the black plastic extrusion that comes with new racks and boards. Older racks and boards have a light-colored

plastic extrusion. The black plastic extrusion is not sold separately. It is included with a new board or rack.

SNAP-PSDIN SNAP-TEX-DRC10SNAP-TEX-REC10W

SNAP TEX Mounting/Wiring Tools and Spare Parts

SNAP TEX Mounting/Wiring Tools and Spare Parts DATA SHEET

Form 1772-141031

PAGE

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

Racks: Installing SNAP Rack DIN-Rail Clips

1. For racks with three or more clips only: Slide one DIN clip

to the middle position and secure with the provided

rivet. For racks with four clips, add another middle clip.

2. Insert one edge of the circuit board into the extrusion.

3. Push down hard on the other edge to snap the board

into place.

4. Attach one DIN clip to each end cap using the slots in

the end caps as shown.

5. Using the screws provided, secure an end cap and DIN

clip assembly to each end of the extrusion.

Attaching the Adapter Clip to a DIN Rail

1. Hook the DIN-rail clip over the top of the DIN rail.

2. Using a screwdriver, pry open the DIN-rail clip flange at

the bottom of the clip. Push the clip towards the DIN rail.

3. Snap the DIN-rail clip into place.

To remove: Use a screwdriver to pry open the DIN-rail clip

flange.

Power Supplies: Installing SNAP-PSDIN

Adapters

1. Remove the four screws that fasten the panel mounting

base plate to the power supply.

2. Remove the panel mounting base plate making sure to

save the screws.

3. Using the two flat-head screws included with the kit,

assemble the SNAP-PSDIN-RAIL adapter as shown.

4. Using the four screws removed in step 1, fasten the DIN-

rail adapter to the power supply.

5. Mount the power supply on the DIN rail next to the rack

or controller it will power.

Rivet

321

DIN rail

Extrusion

assembly

NOTE: The SNAP-PS5-

24DC power supply is

shown. Other power

supplies have similar

base plates.

SNAP TEX Mounting/Wiring Tools and Spare Parts

PAGE

DATA SHEET

Form 1772-141031

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

Installing the SNAP-ROKDIN Adapter Kit

This adapter kit is for the SNAP-PAC-SRA arbiter or the SNAP-

RPSW redundant power switch. The DIN-rail clip adds an

additional 0.375 inches (0.95 cm) to the device’s height. You

need one adapter kit per device.

1. Turn the device over. Unscrew the four flat-head screws

and remove the base plate. Save the screws.

2. Attach the new, plain base plate to the device using the

saved screws.

3. Align the DIN-rail clip to the new base plate so that the

spring will be at the bottom of the device when it is

mounted on the DIN rail. Use the two round-head screws

provided with the kit to attach the clip..

4. To mount, align the spring clip with the bottom edge of

the DIN rail, push up to engage the spring, and slip the

two top flanges over the top edge of the DIN rail.

Wiring Accessories

Jumper Straps for SNAP Digital I/O

SNAP I/O module jumper straps let you easily make jumper

connections on a 4-channel digital SNAP I/O module.

•The SNAP-STRAPB plugs into individual wire connections

on an an 8-position pluggable field connector.

•The SNAP-STRAP-OMR plugs into the 12-position field

connectors on SNAP-OMR6 mechanical relay output

modules to connect the third wire of each channel.

•SNAP-STRAPs on multiple modules can be connected

using the SNAP-WIRESTRAPB.

Both parts are Factory Mutual approved.

For other wiring options, see form #1756, the SNAP TEX Cables

and Breakout Boards Data Sheet.

Length of wire between connectors = 3.25" (8.26 cm)

SNAP-STRAP-OMR works with 12-position gray

field connectors on SNAP-OMR6 modules.

SNAP-STRAPB works with 8-position field

connectors on many SNAP I/O modules.

SNAP TEX Mounting/Wiring Tools and Spare Parts

SNAP TEX Mounting/Wiring Tools and Spare Parts DATA SHEET

Form 1772-141031

PAGE

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

Other Accessories

Connector Caps

The SNAP-TEX-RCKCAP slips over an empty module

connector on the rack to keep it dirt- and dust-free. The

flexible black plastic cap is removable at any time. Pack of 16.

Replacement Parts

The SNAP-FIELDCONB replaces lost or damaged field

connectors (pack of 10). The connector plugs into the top of a

SNAP I/O module and is used for wiring field devices to the

module. Used with most 1-, 2-, and 4-channel digital and

analog modules, it accepts up to 14 AWG wire. Torque

specifications for connector screws: 5.26 inch lbs

(0.6 Newton m.)

The SNAP-MR10 is a replacement mechanical relay (10 A)

and clip for SNAP-TEX-MR10-16, SNAP-TEX-MR10-16C, and

SNAP-TEX-MR10-4 breakout boards. Typical life expectancy

(Electrical): 1 x 105.

SNAP I/O Module Removal Tool

The SNAP-MODTOOL, included with each I/O mounting rack,

is used to remove a SNAP I/O module from the rack. If you

need extra tools, order this pack of 25.

To remove a module:

1. If the modules are held in place with screws, remove

them.

2. Holding the SNAP module tool (provided) as shown in

the illustration below, insert it into the notch at the base

of the module.

3. Squeeze the module tool against the module to open

the release latch, and pull straight up on the module to

remove it.

Rack Adapters for Mixing Legacy and Current

Brains and Racks

While it’s always best to use brains and racks designed to work

together, sometimes mixing them is temporarily necessary.

Two rack adapters are available:

•SNAP-RCK-B2M allows a legacy SNAP brain such as a

SNAP-B3000-ENET (blue connector) to be used on a SNAP

PAC rack or a SNAP M-series rack (black connector).

•SNAP-RCK-M2B allows a newer SNAP PAC brain or rack-

mounted controller, such as a SNAP-PAC-EB2 or a SNAP-

PAC-R1 (black connector), to be used on an older SNAP B-

series rack (blue connector).

Please note that the adapter does not change the

functionality or limitations of the older products. For example,

when used with a newer brain or controller, a SNAP B-series

rack is still limited to using digital modules only in its first eight

slots.

For additional information, see form #1688, SNAP PAC System

Migration Technical Note and form #1693, Legacy and Current

Product Compatibility Charts.

More About Opto 22

www.opto22.com • Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-131203

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Products

Opto 22 develops and manufactures reliable, flexible, easy-to-use

hardware and software products for industrial automation,

energy management, remote monitoring, and data acquisition

applications.

groov

puts your system on your mobile device. With zero

programming, you can build mobile operator interfaces to

monitor and control systems from Allen-Bradley, Siemens,

Schneider Electric, Modicon, and many more. Web-based

groov

puts mobile-ready gadgets at your fingertips. Tag them from your

existing tag database, and they automatically scale for use on any

device with a modern web browser. See

groov.com

for more

information and your free trial.

SNAP PAC System

Designed to simplify the typically complex

process of selecting and applying an

automation system, the SNAP PAC

System consists of four integrated

components:

•SNAP PAC controllers

•PAC Project™ Software Suite

•SNAP PAC brains

•SNAP I/O™

SNAP PAC Controllers

Programmable automation controllers

(PACs) are multifunctional, modular controllers based on open

standards.

Opto 22 has been manufacturing PACs for over two decades. The

standalone SNAP PAC S-series, the rack-mounted SNAP PAC R-

series, and the software-based SoftPAC™ all handle a wide range

of digital, analog, and serial functions for data collection, remote

monitoring, process control, and discrete and hybrid

manufacturing.

SNAP PACs are based on open Ethernet and Internet Protocol (IP)

standards, so you can build or extend a system easily, without the

expense and limitations of proprietary networks and protocols.

Wired+Wireless™ models are also available.

PAC Project Software Suite

Opto 22’s PAC Project Software Suite provides full-featured, cost-

effective control programming, HMI (human machine interface)

development and runtime, OPC server, and database connectivity

software for your SNAP PAC System.

Control programming includes both easy-to-learn flowcharts and

optional scripting. Commands are in plain English; variables and I/

O point names are fully descriptive.

PAC Project Basic offers control and HMI tools and is free for

download on our website,

www.opto22.com

. PAC Project

Professional, available for separate purchase, adds one SoftPAC,

OptoOPCServer, OptoDataLink, options for controller redundancy

or segmented networking, and support for legacy Opto 22 serial

mistic™

I/O units.

SNAP PAC Brains

While SNAP PAC controllers provide central control and data

distribution, SNAP PAC brains provide distributed intelligence for

I/O processing and communications. Brains offer analog, digital,

and serial functions, including thermocouple linearization; PID

loop control; and optional high-speed digital counting (up to 20

kHz), quadrature counting, TPO, and pulse generation and

measurement.

SNAP I/O

I/O provides the local connection to sensors and equipment.

Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module,

depending on the type of module and your

needs. Analog, digital, and serial modules are

all mixed on the same mounting rack and

controlled by the same processor (SNAP PAC

brain or rack-mounted controller).

Quality

Founded in 1974, Opto 22 has established a

worldwide reputation for high-quality products.

All are made in the U.S.A. at our manufacturing

facility in Temecula, California. Because we

test each product twice before it leaves our

factory, rather than only testing a sample

of each batch, we can guarantee most

solid-state relays and optically isolated I/O

modules for life.

Free Product Support

Opto 22’s California-based Product Support Group offers free,

comprehensive technical support for Opto 22 products. Our staff

of support engineers represents decades of training and

experience. Support is available in English and Spanish by phone

or email, Monday–Friday, 7 a.m. to 5 p.m. PST.

Additional support is always available on our website: how-to

videos, OptoKnowledgeBase, self-training guide, troubleshooting

and user’s guides, and OptoForums.

In addition, hands-on training is available for free at our Temecula,

California headquarters, and you can

Purchasing Opto 22 Products

Opto 22 products are sold directly and through a worldwide

network of distributors, partners, and system integrators. For

more information, contact Opto 22 headquarters at 800-321-

6786 or 951-695-3000, or visit our website at