Products and specifications subject to chang e without notice.
Order/Technical Support - Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com
4/8
➜ Ø 42 mm 10 to 17 Watts
D.C. direct drive brushed motors
A range of 42 mm diameter D.C. direct-drive brushed
motors with 10 or 17 Watts output power.
■ Available in either 12, 24 or 48V D.C. versions
■ Sintered bronze bearings lubricated for life
■ Supply connection by 4.75 mm tags
■ Replaceable brushes
■ Optional magnetic encoder
Specifications
10 Watts 10 Watts 17 Watts 17 Watts
Type 82 810 0 82 810 0 82 800 0 82 800 0
Voltage 12 V24 V12 V24 V
Part numbers 82 810 017 82 810 018 82 800 036 82 800 037
No-load characteristics
Speed of rotation (rpm) 2850 2780 2960 2750
Absorbed power (W ) 4.8 4.3 4.8 4.3
Absorbed current (A) 0.4 0.18 0.4 0.18
Nominal characteristics
Speed (rpm) 2000 2000 2000 2000
Torque (mN.m) 45 41.5 75 75
Usable power (W) 9.4 8.7 15.7 15.6
Absorbed power (W) 20.4 15.6 30 26.4
Absorbed current (A) 1.7 0.65 2.5 1.1
Gearbox case temperature rise (°C) 45 46 44 40
Efficiency (%) 46 55.7 52 59
General characteristics
Insulation class (conforming to IEC
85) F (155 °C) F (155 °C) F (155 °C) F (155 °C)
Protection (IEC 529) Housing IP20 IP20 IP20 IP20
Max. output (W ) 10.3 9.5 16.3 17
Start torque (mN.m) 127 117 185 210
Starting current (A) 4 1.7 5.8 2.7
Resistance (Ω) 3.1 14.6 2 7.7
Inductance (mH) 2.5 10.7 1.8 6.9
Torque constant (Nm/A) 0.035 0.077 0.0342 0.0724
Electrical ti me constant (ms) 0.8 0.73 0.89 0.89
Mechanical time constant (ms) 19 17 18 16
Thermal time constant (min) 10 10 12 12
Inertia (g.cm2)80 72 105 110
Weight (g) 310 310 400 400
No of segments 8 8 8 8
Service life (h) 3000 3000 3000 3000
Sintered bronze bearings ✓ ✓ ✓ ✓
Replaceable brushes (mm) ✓ ✓ ✓ ✓
Products adaptations, available on request
■ Special output shafts
■ Pinion on output shaft
■ Special supply voltages
■ Special cable lengths
■ Special output bearings
■ Optional encoder
■ Special mounting plate
■ Customized electronics
■ Special connectors
CrouzetMotors.book Page 8 Wednesday, July 7, 2004 2:51 PM