CPH3215-TL-E - ON Semiconductor - Datasheet.Directory

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

PNP/NPN Epitaxial Planar Silicon Transistors

DC/DC Converter Applications

Ordering number:ENN6344

CPH3115/CPH3215

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

21000TS (KOTO) TA-2681 No.6344–1/5

retemaraPlobmySsnoitidnoCsgnitaRtinU

egatloVesaB-ot-rotcelloCV

OBC 04)03–(V

egatloVrettimE-ot-rotcelloCV

OEC 03)–(V

egatloVesaB-ot-rettimEV

OBE 5)–(V

tnerruCrotcelloCI

C5.1)–(A

)esluP(tnerruCrotcelloCI

PC 3)–(A

tnerruCesaBI

B003)–(Am

noitapissiDrotcelloCP

C9.0W

erutarepmeTnoitcnuJjT 051

erutarepmeTegarotSgtsT 051+ot55–

0.05

0.9

0.7 0.2 1.6 0.60.6

1.9

2.8

0.2

2.9

0.15

0.4

Package Dimensions

unit:mm

2150A

[CPH3115/CPH3215]

Applications

· Relay drivers, lamp drivers, motor drivers, and

strobes.

Features

· Adoption of MBIT processes.

· Large current capacitance.

· Low collector-to-emitter saturation voltage.

· High-speed switching.

· Ultrasmall-sized package permitting applied sets to

be made small and slim (mounting height : 0.9mm).

· High allowa ble power dissipation.

˚C

Electrical Characteristics at Ta = 25˚C

1 : Base

2 : Emitter

3 : Collector

SANYO : CPH3

Mounted on a ceramic board (600mm2×0.8mm)

Marking : CPH3115 : AQ, CPH3215 : CQ Continued on next page.

Specifications

( ) : CPH3115

Absolute Maximum Ratings at Ta = 25˚C

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

tnerruCffotuCrotcelloCI

OBC VBC I,V03)–(= E0=1.0)–(Aµ

tnerruCffotuCrettimEI

OBE VBE I,V4)–(= C0=1.0)–(Aµ

niaGtnerruCCD hEF VEC I,V2)–(= CAm001)–(= 002065

tcudorPhtdiwdnaB-niaGf

TVEC I,V01)–(= CAm003)–(= )054(zHM

005zHM

ecnaticapaCtuptuOboCV

BC zHM1=f,V01)–(= 8)9(Fp

CPH3115/CPH3215

No.6344–2/5

Continued from preceding page.

Switching Time Test Circuit

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

egatloVnoitarutaSrettimE-ot-rotcelloCV

)tas(EC ICI,Am057)–(= BAm51)–(= )052–()573–(Vm

051522Vm

egatloVnoitarutaSrettimE-ot-esaBV

)tas(EB ICI,Am057)–(= BAm51)–(=58.0)–(2.1)–(V

egatloVnwodkaerBesaB-ot-rotcelloCV

OBC)RB( ICI,Aµ01)–(= E0= )03–(V

04V

egatloVnwodkaerBrettimE-ot-rotcelloCV

OEC)RB( ICR,Am1)–(= EB =∞03)–(V

egatloVnwodkaerBesaB-ot-rettimEV

OBE)RB( IEI,Aµ01)–(= C0=5)–(V

emiTNO-nruTt

no .tiucrictsetdeificepseeS 53sn

emiTegarotSt

gts .tiucrictsetdeificepseeS )511(sn

502sn

emiTllaFt

f.tiucrictsetdeificepseeS 03sn

50Ω

INPUT

VRRBRL

12V

100µF 470µF

–5V

PW=20µsIB1

IB2

DC≤1%

20IB1= –20IB2= IC=750mA

(For PNP, the polarity is reversed.)

--2.0

--1.0

--1.8

--1.6

--1.4

--1.2

--0.8

--0.6

--0.4

--0.2

IC -- VCE

0 --0.2--0.1 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0.20.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

2.0

1.0

IC -- VCE

IB=0

IC -- VBE

--1.6

--1.4

--1.2

--1.0

--0.8

--0.6

--0.4

--0.2

00 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2

CPH3115

VCE=--2V

--25°C

25°C

Ta=75°C

1.8

1.6

1.4

1.2

0.8

0.6

0.4

0.2

IC -- VBE

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

00 0.2 0.4 0.6 0.8 1.21.0

--25°C

CPH3215

VCE=2V

Ta=75°C

25°C

IT01673

IT01675

IT01674

IT01676

CPH3115

--50mA

--40mA

--30mA

--20mA

--10mA

--2mA

--4mA

--6mA

--8mA

IB=0

CPH3215

50mA

40mA

30mA

20mA

10mA

8mA

6mA

4mA

2mA

Collector Current, IC–A

Collector-to-Emitter Voltage, VCE –V

Collector Current, IC–A

Collector-to-Emitter Voltage, VCE –V

Collector Current, IC–A

Base-to-Emitter Voltage, VBE –V

Collector Current, IC–A

Base-to-Emitter Voltage, VBE –V

CPH3115/CPH3215

No.6344–3/5

hFE -- IC

1000

10 23 57

--0.01 --1.0--0.1 23 57 23

100

CPH3115

VCE=--2V

--25°C

25°C

Ta=75°C

fT -- IC

1000

23 57 23 257

--0.01 --1.0--0.1

100

hFE -- IC

1000

10 23 57

0.01 1.0

0.1 23 57 23

100

CPH3215

VCE=2V

--25°C

25°C

Ta=75°C

fT -- IC

1000

100

223 57 23 257

0.01 1.00.1

CPH3115

VCE=--10V CPH3215

VCE=10V

IT01677

IT01679

IT01678

IT01680

Cob -- VCB

100

23 57

0.1 1.0 23 57

10 23 5

Cob -- VCB

100

223 57

--0.1 --1.0 23 57

--10 23 5

CPH3215

f=1MHz

VCE(sat) -- IC

1.0

23 57

0.01 1.00.1 23 57 23

0.1

0.01

VCE(sat) -- IC

--1.0

--0.01 23 57

--0.01 --1.0--0.1 23 57 23

--0.1

CPH3115

IC / IB=20

--25°C

25°C

Ta=75°C

IT01681

IT01683

IT01682

IT01684

CPH3115

f=1MHz

CPH3215

IC / IB=20

--25°C

Ta=75°C

25°C

DC Current Gain, hFE

Collector Current, IC–A

Output Capacitance, Cob – pF

Collector-to-Base Voltage, VCB –V

Gain-Bandwidth Product, fT– MHz

Collector Current, IC–A

Collector-to-Emitter

Saturation Voltage, VCE(sat) –V

DC Current Gain, hFE

Collector Current, IC–A

Output Capacitance, Cob – pF

Collector-to-Base Voltage, VCB –V

Gain-Bandwidth Product, fT– MHz

Collector Current, IC–A

Collector-to-Emitter

Saturation Voltage, VCE(sat) –V

CPH3115/CPH3215

No.6344–4/5

VCE(sat) -- IC

1.0

0.01 23 57

0.01 1.00.1 23 57 23

0.1

CPH3215

IC / IB=50

75°C

Ta=--25°C

VBE(sat) -- IC

0.1 23 57

0.01 1.00.1 23 57 23

1.0

CPH3215

IC / IB=50

Ta=--25°C

25°C

75°C

VCE(sat) -- IC

23 57

--0.01

--0.01 --1.0--0.1 23 57 23

CPH3115

IC / IB=50

75°C

25°C

Ta=--25°C

--1.0

--0.1

VBE(sat) -- IC

--10

--0.1 23 57

--0.01 --1.0--0.1 23 57 23

--1.0

CPH3115

IC / IB=50

Ta=--25°C

75°C

IT01685

IT01687

IT01686

IT01688

25°C

PC -- Ta

1.4

0.2

0.4

0.6

0.8

0.9

1.0

1.2

0 20 40 60 80 100 120 140 160

A S O

1.0

0.1

0.01 23 57 23 57 23 57

0.1 1.0 10 100

DC operation

100ms

10ms

500µs

100µs

ICP

IT01689 IT01690

1ms

CPH3115/CPH3215 CPH3115/CPH3215

25°C

Collector Current, IC–A

Collector-to-Emitter

Saturation Voltage, VCE(sat) –V

Collector Current, IC–A

Base-to-Emitter

Saturation Voltage, VBE(sat) –V

Collector Current, IC–A

Collector-to-Emitter

Saturation Voltage, VCE(sat) –V

Collector Current, IC–A

Base-to-Emitter

Saturation Voltage, VBE(sat) –V

Collector Current, IC–A

Collector-to-Emitter Voltage, VCE –V

Collector Dissipation, PC–W

Ambient Temperature, Ta – °C

Ta=25°C

Single pulse

Mounted on a ceramic board(600mm

×0.8mm)

For PNP, minus sign is omitted.

Mounted on a ceramic board (600mm

×0.8mm)

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer's

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of February, 2000. Specifications and information herein are subject

to change without notice.

CPH3115/CPH3215

PS No.6344–5/5