1
10-2014, Rev. 1014
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Low Power PCB Relays
n 2 pole 8A, 2 form C (CO) or 2 form A (NO) contacts
n DC or AC coil
n 5kV/10mm coil-contact, reinforced insulation
n Ambient temperature up to 85°C
n WG version: product in accordance to IEC60335-1
n Reflow version: for THR (Through-Hole Reflow) soldering process
Typical applications
Boiler control, timers, garage door control, POS automation, interface
modules.
Approvals
VDE Cert. No. 40007571, UL E214025, cCSAus 1142018
Technical data of approved types on request.
Contact Data
Contact arrangement 2 form C (CO) or 2 form A (NO)
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 8A, UL: 10A
Limiting continuous current 8A, UL: 10A
Limiting making current, max. 4s, duty factor 10% 15A
Breaking capacity max. 2000VA
Contact material AgNi 90/10, AgNi 90/10 gold plated,
AgSnO2
Frequency of operation, with/without load
DC coil 360/72000h-1
AC coil 360/36000h-1
Operate/release time max., DC coil 8/6ms
Bounce time max., DC coil, form A/form B 4/10ms
Electrical endurance see electrical endurance graph1)
Contact ratings
Type Contact Load Cycles
IEC 61810
RT424 DC coil C (CO) 8A, 250VAC, cosφ=1, 85°C 10x103
RT444 AC coil A (NO) 8A, 250VAC, cosφ=1, 70°C 50x103
RT424 AC coil C (CO) 8A, 250VAC, cosφ=1, 70°C 30x103
UL 508
RT424 DC coil A/B (NO/NC) 10A, 250VAC, gen. purpose, 85°C 20x103
RT424 DC coil A/B (NO/NC) 1/2hp, 240VAC, 85°C 1x103
RT424 DC coil A/B (NO/NC) Pilot duty, B300, R300, 85°C 6x103
EN60947-5-1
RTE24 DC coil A/B (NO/NC) AC15, 250VAC, 3A 6.050
RTE24 DC coil A/B (NO/NC) DC13, 24VDC, 2A 6.050
RTE24 DC coil A/B (NO/NC) DC13, 250VDC, 0.2A 6.050
EN60730-1
RT424 DC coil A/B (NO/NC) 6(2)A, 250VAC, 85°C 100x103
1) For reflow solderable versions: actual contact performance may be influenced by the
reflow soldering process.
Contact Data (continued)
Mechanical endurance
DC coil >30x106 operations
DC coil, reflow version >10x106 operations
AC coil >5x106 operations
AC coil, reflow version >2x106 operations
Coil Data
Coil voltage range, DC coil/AC coil 5 to 110VDC / 24 to 230VAC
Operative range, IEC 61810 2
Coil insulation system according UL class F
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%2) mW
005 5 3.5 0.5 62 403
006 6 4.2 0.6 90 400
009 9 6.3 0.9 200 400
012 12 8.4 1.2 360 400
024 24 16.8 2.4 1440 400
048 48 33.6 4.8 5520 417
060 60 42.0 6.0 85702) 420
110 110 77.0 11.0 288002) 420
2) Coil resistance ±12%. All figures are given for coil without pre-energization, at ambient
temperature +23°C. Other coil voltages on request.
Coil versions, AC coil 50Hz
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VAC VAC VAC Ω±15%3) VA
524 24 18.0 3.6 3503) 0.76
615 115 86.3 17.3 8100 0.76
620 120 90.0 18.0 8800 0.75
700 200 150.0 30.0 24350 0.76
730 230 172.5 34.5 32500 0.74
3) Coil resistance ±10%. All figures are given for coil without pre-energization, at ambient
temperature +23°C, 50Hz. Other coil voltages on request.
Power PCB Relay RT2 DC and AC (for global markets)
Z
b
2
10-2014, Rev. 1014
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Low Power PCB Relays
Power PCB Relay RT2 DC and AC (for global markets) (Continued)
Other Data (continued)
Terminal type PCB-THT, plug-in
reflow version PCB-THR
Mounting distance, AC coil ≥2.5mm
Weight 13g
Resistance to soldering heat THT, IEC 60068-2-20
RTII 270°C/10s
RTIII 260°C/5s
Resistance to soldering heat THR
reflow soldering (for reflow version) forced gas convection 4) or
vapour phase 5)
temperature profile according EN61730
Packaging/unit tube/20pcs., box/500pcs.
4) infrared heating not allowed.
5) recommended fluid LS/230.
Accessories
For details see datasheet
Accessories Industrial Power Relay RT
NOTE: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
Insulation Data
Initial dielectric strength
between open contacts 1000Vrms
between contact and coil 5000Vrms
between adjacent contacts 2500Vrms
Clearance/creepage
between contact and coil ≥10/10mm
between adjacent contacts ≥3/4mm
Material group of insulation parts IIIa
Tracking index of relay base PTI 250V
reflow version PTI 175V
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Resistance to heat and fire
WG version or reflow version according EN60335, par30
Ambient temperature
DC coil -40 to 85°C
AC coil -40 to 70°C
AgSnO2 contacts -40 to 70°C
Category of environmental protection, IEC 61810
standard version RTII - flux proof, RTIII - wash tight
reflow version RTII - flux proof
Vibration resistance (functional),
form A/form B contact, 30 to 300Hz 20g/5g
Shock resistance (destructive) 100g
PCB layout / terminal assignment
Bottom view on solder pins
2 form C (CO) contacts
2 form A (NO) contacts
*) With the recommended PCB hole sizes a grid
pattern from 2.5 mm to 2.54 mm can be used.
Dimensions
Process conditions for Reflow soldering
according to EN61760-1
THT version THR version (reflow solderable)
3
10-2014, Rev. 1014
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Low Power PCB Relays
Power PCB Relay RT2 DC and AC (for global markets) (Continued)
Product code structure Typical product code RT 4 2 4 024
Type
RT Power PCB Relay RT2
Version
4 8A, pinning 5mm, flux proof
E 8A, pinning 5mm, wash tight (not for Reflow version)
Contact arrangement
2 2 form C (CO) contacts
4 2 form A (NO) contacts
Contact material
3 AgSnO
4 AgNi 90/10
5 AgNi 90/10 gold plated
Coil
Coil code: please refer to coil versions table
Version
Blank Standard version
WG Product in accordance with IEC 60335-1 (domestic appliances)
R Reflow solderable
Product code Version Contacts Contact material Coil Version Part number
RT423730 8A, 2 form C (CO) AgSnO 230VAC Standard 4-1393243-3
RT424005 pinning 5mm, contacts AgNi 90/10 5VDC 5-1393243-9
RT424006 flux proof 6VDC 6-1393243-1
RT424012 12VDC 6-1393243-3
RT424012WG IEC60335-1 compliant 7-1415538-8
RT424024 24VDC Standard 6-1393243-8
RT424024WG IEC60335-1 compliant 7-1415538-7
RT424048 48VDC Standard 7-1393243-0
RT424060 60VDC 7-1393243-3
RT424110 110VDC 7-1393243-5
RT424524 24VAC 7-1393243-6
RT424615 115VAC 7-1393243-8
RT424730 230VAC 7-1393243-9
RT425003 AgNi 90/10 3VDC 7-1415525-1
RT425005 gold plated 5VDC 8-1393243-0
RT425012 12VDC 8-1393243-2
RT425024 24VDC 8-1393243-5
RT444012 2 form A (NO) AgNi 90/10 12VDC 9-1393243-7
RT444024 contacts 24VDC 9-1393243-9
RTE24005 8A, 2 form C (CO) 5VDC 1393243-1
RTE24006 pinning 5mm, contacts 6VDC 1393243-2
RTE24012 wash tight 12VDC 1393243-4
RTE24024 24VDC 1-1393243-0
RTE24048 48VDC 1-1393243-1
RTE24110 110VDC 1-1393243-4
RTE24524 24VAC 1-1393243-5
RTE24615 115VAC 1-1393243-7
RTE24730 230VAC 1-1393243-8
RTE25005 AgNi 90/10 5VDC 1-1393243-9
RTE25012 gold plated 12VDC 2-1393243-0
RTE25024 24VDC 2-1393243-1
RTE25524 2-1393243-4
RTE43009 2 form A (NO) AgSnO 9VDC 4-1415535-1
RTE44009 contacts AgNi 90/10 3-1393243-1
RTE44730 230VAC 3-1393243-5
This list represents the most common types and does not show all variants covered by this datasheet.
Other types on request.