LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ AUTOMOTIVE COMPLIANT DUAL AND QUAD DIFFERENTIAL COMPARATORS Pin Assignments The LM2901Q/2903Q series comparators consist of four and two independent precision voltage comparators with very low input offset voltage specification. They are designed to operate from a single power supply over a wide range of voltages; however operation from split power supplies is also possible. They offer low power supply current independent of the magnitude of the power supply voltage. The LM2901Q/2903Q series comparators are designed to directly interface with TTL and CMOS. The LM2903Q dual devices are available in SO-8, MSOP-8 and TSSOP-8; and the LM2901Q quad devices are available in SO-14 and TSSOP-14 - all are in industry-standard pinouts. LM2903Q/ LM2903AQ (Top View) 1OUT 1IN1IN+ GND 1 2 3 8 VCC 7 2OUT - 6 2IN- + 5 2IN+ 1 + ADVANCED INFORMATION Description 2 4 SO-8/TSSOP-8/MSOP-8 All use "green" mold compound and are qualified to AEC-Q100 Grade 1 and are Automotive Compliant supporting PPAPs. LM2901Q/ LM2901AQ Features Notes: 2IN- 4 2 2IN+ 5 1IN- 6 7 - 1IN+ 1 11 4IN+ 4 + 3 13 4OUT 12 GND + VCC 14 3OUT + 2OUT 1 2 1OUT + (Top View) Wide Power Supply Range: Single Supply: 2V to 36V Dual Supplies: 1.0V to 18V Very Low Supply Current Drain - Independent of Supply Voltage LM2903Q: 0.6mA LM2901Q: 0.9mA Low Input Bias Current: 25nA Low Input Offset Current: 5nA Typical Offset Voltage: Non-A Device: 2mV A Device: 1mV Common-Mode Input Voltage Range Includes Ground Differential Input Voltage Range Equal to the Power Supply Voltage Low Output Saturation Voltage: LM2903Q: 200mV at 4mA LM2901Q: 100mV at 4mA Output Voltage Compatible with TTL, MOS and CMOS Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q100 Grade 1 PPAP Capable (Note 4) 3 - 10 4IN9 3IN+ 8 3IN- SO-14/TSSOP-14 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q100 qualified and are PPAP capable. Refer http://www.diodes.com/quality/product_compliance_definitions/. LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 1 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Schematic Diagram ADVANCED INFORMATION V Q2 +INPUT CC Q3 Q1 Q4 OUTPUT -INPUT Q8 Q7 Q6 Q5 Functional Block Diagram of LM2901Q/2901AQ/2903Q/2903AQ (Each Comparator) Pin Descriptions LM2901Q, LM2901AQ Pin Name Pin # 1OUT 1 2OUT 2 Function Channel 1 Output Channel 2 Output VCC 3 Chip Supply Voltage 2IN2IN+ 4 5 Channel 2 Inverting Input Channel 2 Non-Inverting Input 1IN- 6 Channel 1 Inverting Input 1IN+ 3IN- 7 8 Channel 1 Non-Inverting Input Channel 3 Inverting Input 3IN+ 9 Channel 3 Non-Inverting Input 4IN- 10 Channel 4 Inverting Input 4IN+ GND 11 12 Channel 4 Non-Inverting Input Ground 4OUT 13 Channel 4 Output 14 Channel 3 Output 1OUT 1IN1IN+ GND 2IN+ 2IN2OUT 1 2 3 4 5 6 7 Channel 1 Output Channel 1 Inverting Input Channel 1 Non-inverting Input Ground Channel 2 Non-Inverting Input Channel 2 Inverting Input Channel 2 Output VCC 8 Chip Supply Voltage 3OUT LM2903Q, LM2903AQ LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 2 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Absolute Maximum Ratings (Note 5) (@TA = +25C, unless otherwise specified.) ADVANCED INFORMATION Symbol Rating Unit VCC Supply Voltage 36 V VID Differential Input Voltage 36 V VIN Input Voltage -0.3 to +36 V IIN Input Current (VIN < -0.3V) 50 mA VO Output Voltage 36 V IO Output Current 20 mA -- Duration of Output Short Circuit to Ground (Note 6) LM2903_QS-13 LM2903_QTH-13 Package Thermal Impedance LM2903_QM8-13 (Note 7) LM2901_QS14 LM2901_QT14 Unlimited 150 175 200 89 100 -- JA TA Operating Temperature Range TJ Operating Junction Temperature TST Storage Temperature Range TLEAD Notes: Parameter Lead Temperature (Soldering, 10 seconds) C/W -40 to +125 C +150 C -65 to +150 C +260 C 5. Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only; functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 6. Short circuits from outputs to VCC can cause excessive heating and eventual destruction. 7. Maximum power dissipation is a function of TJ(MAX), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(MAX) - TA)/JA. Operating at the absolute maximum TJ of +150C can affect reliability. ESD Ratings Human Body Mode ESD Protection (Note 8) Charge Device Mode ESD Protection Note: LM2901_QS14 LM2901_QT14 LM2903_QS-13 LM2903_QTH-13 LM2903_QM8-13 LM2901_QS14 LM2901_QT14 LM2903_QS-13 LM2903_QTH-13 LM2903_QM8-13 500 500 500 500 <500 V 1,000 8. Human body model, 1.5k in series with 100pF. Recommended Operating Conditions (Over Operating Free-Air Temperature Range, unless otherwise noted.) Parameter Supply Voltage Single Supply Dual Supply Ambient Temperature Range Junction Temperature Range LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 3 of 19 www.diodes.com Min 2 1 -40 -40 Max 36 18 +125 +125 Units V C June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Electrical Characteristics (Notes 9 & 10) (@VCC = 5.0V, GND = 0V, TA = +25C, unless otherwise specified.) LM2901Q, LM2901AQ Parameter Input Offset Voltage ADVANCED INFORMATION VIO Conditions VIC = VCMR Min, VO = 1.4V, VCC = 5V to 30V (Note 11) Non-A Device A-Suffix Device IB Input Bias Current IIN+ or IIN- with OUT in Linear Range, VCM = 0V (Note 12) IIO Input Offset Current IIN+ - IIN-, VCM = 0V Input Common-Mode Voltage Range VCC = 30V (Note 13) VCMR Supply Current (Four Comparators) ICC TA Min TA = +25C -- 2 7 Full Range -- -- 15 TA = +25C -- 1 2 RL = on Quad Channels VCC = 5V Max Full Range -- -- 4 TA = +25C -- 25 250 Full Range -- -- 500 TA = +25C -- 5 50 Full Range -- 0 to VCC -1.5 -- 200 -- -- TA = +25C VCC = 30V Typ Unit mV nA nA V Full Range 0 to VCC -2 -- -- TA = +25C -- 1.2 2.5 Full range -- -- -- 3.5 TA = +25C 0.9 2 mA Full Range -- -- 3.0 TA = +25C 50 200 -- V/mV ns AV Voltage Gain VCC = 15V, VOUT = 1V to 11V, RL 15k, -- Large Signal Response Time VIN = TTL Logic Swing, VREF = 1.4V, VRL = 5V, RL = 5.1k TA = +25C -- 300 -- -- Response Time VRL = 5V, RL = 5.1k (Note 14) TA = +25C -- 1.3 -- s IO(SINK) Output Sink Current VIN- = 1V, VIN+ = 0, VO 1.5V TA = +25C 6 16 -- mA VSAT Saturation Voltage VIN- = 1V, VIN+ = 0, ISINK 4mA TA = +25C -- 100 400 Full Range -- 700 Output Leakage Current IO(LEAK) Differential Input Voltage VID Notes: 9. 10. 11. 12. 13. 14. 15. mV VIN- = 0V, VIN+ = 1, VO = 5V TA = +25C -- -- 0.1 -- nA VIN- = 0V, VIN+ = 1, VO = 30V Full Range -- -- 1 A Full Range -- -- 36 V All VIN 0V (or V- if used) (Note 15) Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material. All limits are guaranteed by testing or statistical analysis. Limits over the full temperature (-40 TA +125C) are guaranteed by design, but not tested in production. VO 1.4V, RS = 0 with VCC from 5V to 30V. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output so no loading change exists on the input lines. The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V (@ +25C). The upper end of the common-mode voltage range is VCC -1.5V (@ +25C), but either or both inputs can go to +36V without damage, independent of the magnitude of V CC. The response time specified is for a 100mV step input with 5mV overdrive. For larger overdrive signals 300ns can be obtained, see typical performance characteristics. Positive excursions of input voltage may exceed the power supply level. As long as other voltages remain within the common mode range, the comparator will provide a proper output stage. The low voltage state must not be less than -0.3V (or 0.3V below the magnitude of the negative power supply, if used). LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 4 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Electrical Characteristics (continued) (Notes 9 & 10) (@VCC = 5.0V, GND = 0V, TA = +25C, unless otherwise specified.) LM2903Q, LM2903AQ ADVANCED INFORMATION Parameter Input Offset Voltage VIO Conditions VIC = VCMR Min, VO = 1.4V, VCC = 5V to =30V (Note 11) Non-A Device A-Suffix Device IB Input Bias Current IIN+ or IIN- with OUT in Linear Range, VCM = 0V (Note 12) IIO Input Offset Current IIN+ - IIN-, VCM = 0V Input Common-Mode Voltage Range VCC= 30V (Note 13) Supply Current RL = on Both Channels VCMR ICC TA Min Typ Max TA = +25C -- 2 7 Full Range -- -- 15 TA = +25C -- 1 2 Full Range -- -- 4 TA = +25C -- 25 250 Full Range -- -- 500 TA = +25C -- 5 50 Full Range -- 0 to VCC -1.5 0 to VCC-2 -- 200 -- -- -- -- TA = +25C -- 0.7 1.7 Full Range -- -- 3.0 TA = +25C -- 0.6 1 TA = +25C Full Range VCC= 30V VCC = 5V Unit mV nA nA V mA Full Range -- -- 2.0 TA = +25C 50 200 -- V/mV AV Voltage Gain VCC = 15V, VOUT = 1V to 11V, RL 15k, -- Large Signal Response Time VIN = TTL Logic Swing, VREF = 1.4V, VRL = 5V, RL = 5.1k TA = +25C -- 300 -- ns -- Response Time VRL = 5V, RL = 5.1k (Note 14) TA = +25C -- 1.3 -- s Output Sink Current VIN- = 1V, VIN+ = 0, VO 1.5V TA = +25C 6 16 -- mA TA = +25C -- 200 400 Full Range -- -- 700 VIN- = 0V, VIN+ = 1, VO = 5V TA = +25C -- 0.1 -- nA VIN- = 0V, VIN+ = 1, VO = 30V Full Range -- -- 1 A All VIN 0V (or V- if used) (Note 15) Full Range -- -- 36 V IO(SINK) Saturation Voltage VSAT IO(LEAK) Output Leakage Current VID Differential Input Voltage Notes: 9. 10. 11. 12. 13. 14. 15. VIN- = 1V, VIN+ = 0, ISINK 4mA mV Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material All limits are guaranteed by testing or statistical analysis. Limits over the full temperature (-40 TA +125C) are guaranteed by design, but not tested in production. VO 1.4V, RS = 0 with VCC from 5V to 30V. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output so no loading change exists on the input lines. The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V (@ +25C). The upper end of the common-mode voltage range is VCC -1.5V (@ +25C), but either or both inputs can go to +36V without damage, independent of the magnitude of V CC. The response time specified is for a 100mV step input with 5mV overdrive. For larger overdrive signals 300ns can be obtained, see typical performance characteristics. Positive excursions of input voltage may exceed the power supply level. As long as other voltages remain within the common-mode range, the comparator will provide a proper output stage. The low voltage state must not be less than -0.3V (or 0.3V below the magnitude of the negative power supply, if used). LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 5 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Performance Characteristics 2.0 1.0 Output Low State O TA=-40 C Output Low State 1.8 O TA=-40 C O TA=+25 C Supply Current (mA) Supply Current (mA) 1.6 0.6 0.4 O TA=+25 C 1.4 1.2 1.0 0.8 0.6 O O TA=+85 C 0.4 TA=+85 C 0.2 O O TA=+125 C TA=+125 C 0.2 LM2903Q/LM2903AQ LM2901Q/LM2901AQ 0.0 0.0 0 0 4 8 12 16 20 24 28 32 36 4 8 12 40 16 20 24 28 32 36 40 Supply Voltage (V) Supply Voltage (V) Supply Current vs. Supply Voltage Supply Current vs. Supply Voltage 2.0 1.0 Output Low State 0.9 Supply Current (mA) Supply Current (mA) 1.6 0.7 0.6 Output Low State 1.8 VCC=30V 0.8 VCC=5.0V 0.5 0.4 0.3 VCC=30V 1.4 1.2 1.0 VCC=5.0V 0.8 0.6 0.4 0.2 0.2 0.1 LM2903Q/LM2903AQ -40 -25 -10 5 20 35 50 65 80 95 110 LM2901Q/LM2901AQ 0.0 0.0 -40 125 -25 -10 5 20 35 50 65 80 95 110 125 O Supply Voltage (V) Temperature ( C) Supply Current vs. Temperature Supply Current vs. Temperature 100 100 VCM=0V 90 VCC=5.0V VCM=0V 90 O 80 80 TA=-40 C 70 TA=+25 C O Input Bias Current (nA) Input Bias Current (nA) ADVANCED INFORMATION 0.8 60 50 40 30 O 20 TA=+85 C 10 TA=+125 C 70 60 50 40 30 20 O 10 LM2903Q/LM2903AQ LM2903Q/LM2903AQ 0 0 0 4 8 12 16 20 24 28 32 36 Document number: DS37814 Rev. 2 - 2 -25 -10 5 20 35 50 65 80 95 110 125 O Input Bias Current vs. Supply Voltage LM2901Q/LM2901AQ/LM2903Q/LM2903AQ -40 Temperature ( C) Supply Voltage (V) Input Bias Current vs. Temperature 6 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Performance Characteristics (continued) 100 100 VCM=0V 90 VCC=5.0V VCM=0V 90 O TA=-40 C Input Bias Current (nA) Input Bias Current (nA) 80 O TA=+25 C 70 O TA=+85 C O 60 TA=+125 C 50 40 30 70 60 50 40 30 20 20 10 10 LM2901Q/LM2901AQ LM29001Q/LM2901AQ 0 0 0 4 8 12 16 20 24 28 32 -40 36 -25 -10 5 20 35 50 65 80 95 110 125 O Temperature ( C) Supply Voltage (V) Input Bias Current vs. Supply Voltage Input Bias Current vs. Temperature 10 10 VCC=15V VCC=15V Output Saturation Voltage (V) O Output Saturation Voltage (V) ADVANCED INFORMATION 80 O TA=-40 C 1 O TA=+25 C O TA=+85 C O TA=+125 C 0.1 0.01 LM2901Q/LM2901QA 1E-3 TA=-40 C O TA=+25 C 1 O TA=+85 C O TA=+125 C 0.1 0.01 LM2903Q/LM2903QA 1E-3 0.1 0.1 1 10 100 Output Sink Current (mA) Output Saturation Voltage vs. Sink Current Output Saturation Voltage vs. Sink Current Response Time for Various Input Overdrive Response Time for Various Input Overdrive Document number: DS37814 Rev. 2 - 2 10 100 Output Sink Current (mA) LM2901Q/LM2901AQ/LM2903Q/LM2903AQ 1 7 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Performance Characteristics (continued) 4.0 2.0 VCC=5.0V 3.5 1.2 2.5 Input Offset Voltage (mV) Input Offset Voltage (mV) ADVANCED INFORMATION 3.0 O TA=-40 C O 2.0 TA=25 C 1.5 TA=125 C O 1.0 0.5 0.8 0.4 O 0.0 TA=-40 C O -0.4 TA=25 C -0.8 TA=125 C O 0.0 -1.2 -0.5 -1.6 -1.0 0.0 VCC=30V 1.6 -2.0 0.5 1.0 1.5 2.0 2.5 3.0 0 3.5 Input Offset Voltage vs. Input Common-Mode Voltage LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Input Common Mode Voltage(V) Input Common Mode Voltage(V) Input Offset Voltage vs. Input Common-Mode Voltage 8 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Application Information ADVANCED INFORMATION General Information The LM2901Q/2903Q series comparators are high-gain, wide-bandwidth devices, and like most comparators, can easily oscillate if the output lead is inadvertently allowed to capacitive couple to the inputs via stray capacitance. This shows up only during the output voltage transition intervals as the comparator changes states. Standard PC board layout is helpful as it reduces stray input-output coupling. Reducing the input resistors to <10k reduces the feedback signal levels and finally, adding even a small amount (1.0 to 10mV) of positive feedback (hysteresis) causes such a rapid transition that oscillations due to stray feedback are not possible. Simply socketing the IC and attaching resistors to the pins will cause inputoutput oscillations during the small transition intervals unless hysteresis is used. If the input signal is a pulse waveform, with relatively fast rise and fall times, hysteresis is not required. All input pins of any unused comparators should be tied to the negative supply. The bias network of the LM2901Q/2903Q series comparators establishes a quiescent current independent of the magnitude of the power supply voltage over the range of from 2.0 VDC to 30 VDC. The differential input voltage may be larger than VCC without damaging the device. Protection should be provided to prevent the input voltages from becoming negative more than -0.3 VDC (@ +25C). An input clamp diode can be used as shown in the applications section. The output of the LM2901Q/2903Q series comparators is the uncommitted collector of a grounded-emitter NPN output transistor. Many collectors can be tied together to provide an output OR'ing function. An output pull-up resistor can be connected to any available power supply voltage within the permitted supply voltage range and there is no restriction on this voltage due to the magnitude of the voltage applied to the VCC terminal of LM2901/2903 series comparator package. The output can also be used as a simple SPST switch to ground (when a pull-up resistor is not used). The amount of current the output device can sink is limited by the drive available (which is independent of VCC) and the of this device. When the maximum current limit is reached (approximately 16mA), the output transistor will come out of saturation and the output voltage will rise very rapidly. The output saturation voltage is limited by the approximately 60 RSAT of the output transistor. The low offset voltage of the output transistor (1.0mV) allows the output to clamp essentially to ground level for small load currents. LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 9 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Typical Application Circuit (VCC = 5.0 VDC) ADVANCED INFORMATION Vcc 5V 3K +VIN 100K +VIN + Vo - +VREF + 1/2 +VREF 8 Vo LM2903/A - Basic Comparator Driving CMOS +5VDC V+ 10K +VREF 3K - + Vo Vo 10K + - 10M +VIN Non-Inverting Comparator with Hysteresis Driving TTL V+ V+ 3K - +VIN Vo V+ + 5.1K + + 1M VIN 1M Vo -5 VDC 1M V Comparator with a Negative Reference Inverting Comparator with Hysteresis LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 10 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Typical Application Circuit (continued) (VCC = 5.0 VDC) V+ V+ 200K R1 1M D1 1N914 R2 100K D2 1N914 2K 15K ADVANCED INFORMATION 100K 80pF V+ 0.1uF V+ - 6us 0 60us t0 t1 0 Vo Vo 1M +15VDC + + 1M 1M CRYSTAL f = 100KHz 200K t2 * For large ratios of R1/R2, D1 can be omitted. Pulse Generator Crystal Controlled Oscillator V+ V+ 6.2K 39K - +0.375V Vo 100K 3K - 1K f A 100K + + B STROBE INPUT * C 100K 1K V+ *Or logic gate without pull-up resistor 0 "0""1" AND Gate Output Strobing V+ V+ V+ 200K +0.075V 100K 3K 0 "0""1" - 1K 100K 100K Vout D2 + B C D3 100K V+ D1 A + B 3K - f A 100K 10K C 1K D4 0 D "0""1" OR Gate Large Fan-in AND Gate LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 11 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Typical Application Circuit (cont.) (VCC = 5.0 VDC) V+(12VDC) 2RS + ADVANCED INFORMATION +VREF HIGH 10K 2N2222 100K LAMP 12 ESB + 100K 5.1K -VIN2 + + VIN - RS +VIN1 2N2222 2RS - +VREF LOW Comparing Input Voltage of Opposite Polarity Limit Comparator V+ V+ V+ + 0 3.0K "0""1" 100K 5.1K 100K 5.1K - VO 5.1K VIN - 1N914 Vo + + 20M 10K - Zero Crossing Detector (Single Power Supply) ORing the Outputs V+ V+ 4.3K 100K 1M 100pF 10K - 0 V+ 75pF + 0 1M t0 1:100KHz Vo 1N914 Vo + V+ 0.001uF 1ms t0 t1 0 1M One-Shot Multivibrator Document number: DS37814 Rev. 2 - 2 + V+ 100K 100K 1N914 LM2901Q/LM2901AQ/LM2903Q/LM2903AQ 100K PW Squarewave Oscillator 12 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ ADVANCED INFORMATION Ordering Information Notes: 13" Tape and Reel Part Number Package Code Packaging (Note 16) Quantity Part Number Suffix Qualification Grade (Note 17) LM2901QT14-13 T14 TSSOP-14 2,500/Tape & Reel -13 Automotive Compliant LM2901AQT14-13 T14 TSSOP-14 2,500/Tape & Reel -13 Automotive Compliant LM2901QS14-13 S14 SO-14 2,500/Tape & Reel -13 Automotive Compliant LM2901AQS14-13 S14 SO-14 2,500/Tape & Reel -13 Automotive Compliant LM2903QS-13 S SO-8 2,500/Tape & Reel -13 Automotive Compliant LM2903AQS-13 LM2903QTH-13 LM2903AQTH-13 LM2903QM8-13 LM2903AQM8-13 S TH TH M8 M8 SO-8 TSSOP-8 TSSOP-8 MSOP-8 MSOP-8 2,500/Tape & Reel 2,500/Tape & Reel 2,500/Tape & Reel 2,500/Tape & Reel 2,500/Tape & Reel -13 -13 -13 -13 -13 Automotive Compliant Automotive Compliant Automotive Compliant Automotive Compliant Automotive Compliant 16. For packaging details, go to our website at http://www.diodes.com/products/packages.html. 17. LM2901Q/2903Q have been qualified to AEC-Q100 grade 1 and are classified as "Automotive Compliant" which supports PPAP documentation. See LM2901/2903 datasheet for commercial qualified versions. LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 13 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ ADVANCED INFORMATION Marking Information (1) TSSOP-14 and SO-14 (2) SO-8 (3) MSOP-8 and TSSOP-8 LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 14 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. E H Gauge Plane L Detail "A" D 7 (4 x) A2 A SO-14 Dim Min Max A 1.47 1.73 A1 0.10 0.25 A2 1.45 Typ B 0.33 0.51 D 8.53 8.74 E 3.80 3.99 e 1.27 Typ H 5.80 6.20 L 0.38 1.27 0 8 All Dimensions in mm e B Detail "A" A1 SO-8 0.254 ADVANCED INFORMATION SO-14 E1 E A1 L Gauge Plane Seating Plane Detail `A' 7~9 h 45 A2 A A3 Detail `A' SO-8 Dim Min Max A -- 1.75 A1 0.10 0.20 A2 1.30 1.50 A3 0.15 0.25 b 0.3 0.5 D 4.85 4.95 E 5.90 6.10 E1 3.85 3.95 e 1.27 Typ h -- 0.35 L 0.62 0.82 0 8 All Dimensions in mm b e D LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 15 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Package Outline Dimensions (Continued) Please see http://www.diodes.com/package-outlines.html for the latest version. 0.25 TSSOP-14 Dim Min Max a1 7 (4X) a2 0 8 A 4.9 5.10 B 4.30 4.50 C 1.2 D 0.8 1.05 F 1.00 Typ F1 0.45 0.75 G 0.65 Typ K 0.19 0.30 L 6.40 Typ All Dimensions in mm B Gauge Plane Seating Plane L F1 a2 Pin# 1 Indent F Detail `A' G K A a1 D C Detail `A' MSOP-8 D 4x 10 0.25 E Gauge Plane x Seating Plane y a ADVANCED INFORMATION TSSOP-14 4x10 L Detail C 1 b E3 A3 A2 A e E1 A1 c See Detail C MSOP-8 Dim Min Max Typ A 1.10 A1 0.05 0.15 0.10 A2 0.75 0.95 0.86 A3 0.29 0.49 0.39 b 0.22 0.38 0.30 c 0.08 0.23 0.15 D 2.90 3.10 3.00 E 4.70 5.10 4.90 E1 2.90 3.10 3.00 E3 2.85 3.05 2.95 e 0.65 L 0.40 0.80 0.60 a 0 8 4 x 0.750 y 0.750 All Dimensions in mm TSSOP-8 TSSOP-8 Dim Min Max Typ a 0.09 A 1.20 A1 0.05 0.15 A2 0.825 1.025 0.925 b 0.19 0.30 c 0.09 0.20 D 2.90 3.10 3.025 D See Detail C E E1 e e c E b a A2 D 0.65 6.40 E1 4.30 4.50 4.425 L 0.45 0.75 0.60 All Dimensions in mm Gauge plane A L A1 Detail C LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 16 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. ADVANCED INFORMATION SO-14 X Dimensions Value (in mm) X 0.60 Y 1.50 C1 5.4 C2 1.27 C1 C2 Y SO-8 X Dimensions X Y C1 C2 C1 Value (in mm) 0.60 1.55 5.4 1.27 C2 Y TSSOP-14 X C1 Dimensions Value (in mm) X 0.45 Y 1.45 C1 5.9 C2 0.65 C2 Y LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 17 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ Suggested Pad Layout (Continued) Please see http://www.diodes.com/package-outlines.html for the latest version. ADVANCED INFORMATION MSOP-8 X C Dimensions Value (in mm) C 0.650 X 0.450 Y 1.350 Y1 5.300 Y Y1 TSSOP-8 Dimensions Value (in mm) X 0.45 Y 1.78 C1 7.72 C2 0.65 C3 4.16 G 0.20 Y X C3 C1 C2 G LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 18 of 19 www.diodes.com June 2016 (c) Diodes Incorporated LM2901Q/ LM2901AQ/ LM2903Q/ LM2903AQ IMPORTANT NOTICE ADVANCED INFORMATION DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2016, Diodes Incorporated www.diodes.com LM2901Q/LM2901AQ/LM2903Q/LM2903AQ Document number: DS37814 Rev. 2 - 2 19 of 19 www.diodes.com June 2016 (c) Diodes Incorporated