1
Inductive sensor NMB15-30GM55-E2
Release date: 2015-02-02 13:46 Date of issue: 2015-02-02 911283_eng.xml
Germany: +49 621 776 4411Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: +1 330 486 0001 Singapore: +65 6779 9091
www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com
fa-info@de.pepperl-fuchs.com
Model Number
NMB15-30GM55-E2
Features
• 15 mm flush
• Stainless steel sensing face
• Increased operating distance
Accessories
AB-30
Mounting aid
Technical Data
General specifications
Switching element function PNP NO
Rated operating distance sn15 mm
Installation flush (Requirements: see drawing below)
Output polarity DC
Assured operating distance sa0 ... 12.15 mm
Actuating element Ferrous and nonferrous targets
Reduction factor rAl 0.4
Reduction factor rCu 0.2
Reduction factor r304 0.85
Reduction factor rSt37 1
Nominal ratings
Operating voltage UB10 ... 30 V DC
Switching frequency f 0 ... 150 Hz
Hysteresis H 3 ... 15 typ. 10 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Volta ge drop Ud≤ 2 V
Operating current IL≤ 200 mA
Off-state current Ir≤ 10 µA
No-load supply current I0≤ 10 mA
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 893 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type cable PUR , 2 m
Core cross-section 0.5 mm2
Housing material Stainless steel 1.4305 / AISI 303
Sensing face Stainless steel 1.4305 / AISI 303
Degree of protection IP69K
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Dimensions
Electrical Connection
36
22,5
45
M30x1,5
55
LED
5
BN L+
L-
BK
BU
Germany: +49 621 776 4411Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: +1 330 486 0001 Singapore: +65 6779 9091
www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com
fa-info@de.pepperl-fuchs.com
Inductive sensor NMB15-30GM55-E2
2
Release date: 2015-02-02 13:46 Date of issue: 2015-02-02 911283_eng.xml
Mild Steel
Sensor face is flush with mounting surface.
30
≥ 4
≥ 82°
