Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Electrolytic Capacitors
Cap. Polarity bar (Positive)
R.V. codeLot No.
W2
W1
L
P
W2
P
H
+
–
W1
L
+
P1
W2
W2
P4
H
P2
P3 P1
–
+
–
● Large capacitance (560 F max.)
● Super Low ESR (3 mΩ max.)
● Low ESL ( 3-terminals : 50 % less than 2-terminals) [Suffi x : L]
● High ripple current (10200 mAr.m.s. max.)
● RoHS compliance, Halogen free
Surface Mount Type
Series : GX (Super Low ESR Products)
Features
Speci cations
Series GX
Category temp. range
–55 °C to +105 °C
Rated voltage range 2 V.DC to 2.5 V.DC
Nominal cap.range 330 µF to 560 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
DC leakage cur rent I < 0.1 CV (µA) 2 minutes
Dissipation factor (tan d)
< 0.06 (120 Hz/+20 °C)
Surge voltage (V.DC) Rated voltage × 1.25 (15 °C to 35 °C)
Endurance
+105 °C, 2000 h, rated voltage applied
Capacitance change Within ±20 % of the initial value
tan d< 2 times of the initial limit
DC leakage cur rent < 3 times of the initial limit
Damp heat
(Steady state)
+60 °C, 90 %, 500 h, No-applied voltage
Capacitance change of
initial measurd val ue
2 V.DC to 2.5 V.DC
+70 %, –20 %
tan d< 2 times of the initial limit
DC leakage current Within the initial limit
Marking
✽ Externals of fi gure are the reference. ✽ Externals of fi gure are the reference.
Series L±0.2
W1±0.2 W2±0.1
H±0.1
P1±0.3 P2±0.1 P3±0.2 P4±0.2
GX 7.3 4.3 2.4 1.9 1.3 1.1 0.7 1.4
2 terminals 3 terminals
Unit : mm Unit : mm
Dimensions (not to scale)
Rated voltage mark
d 2 V.DC
e 2.5 V.DC
Series L±0.2 W1±0.2 W2±0.1 H±0.1 P±0.3
GX 7.3 4.3 2.4 1.9 1.3
Mar. 201806
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Electrolytic Capacitors
Reflow ✽3<Standard>
Characteristics list
✽1: Ripple current (100 kHz/ +45°C ), ✽2: ESR (100 kHz/+20 °C)
✽3: Please refer to the page of “Mounting Specifi cations”.
✽4: Please contact us when 500 pcs packing is necessary.
Series
Rated
voltage
(V.DC)
Capacitance
(±20 %)
(µF)
Case size (mm) Specifi cation
The number
of
terminals
Part number
Min.✽4
Packaging
Q’ty
(pcs)
LWH
✽1
Ripple
current
(mAr.m.s.)
✽2
ESR
(mΩ max.)
23
GX
2
330 7.3 4.3 1.9 10200 3 ○EEFGX0D331R 3500
470 7.3 4.3 1.9 10200 3 ○EEFGX0D471R 3500
7.3 4.3 1.9 10200 3 ○EEFGX0D471L 3500
560 7.3 4.3 1.9 10200 3 ○EEFGX0D561R 3500
7.3 4.3 1.9 10200 3 ○EEFGX0D561L 3500
2.5
330 7.3 4.3 1.9 10200 3 ○EEFGX0G331R 3500
470 7.3 4.3 1.9 10200 3 ○EEFGX0E471R 3500
7.3 4.3 1.9 10200 3 ○EEFGX0E471L 3500
Temperature compensation multipliers for ripple current
Temp. T < 45 °C 45 °C < T < 85 °C 85 °C < T < 105 °C
Coeffi cient 1.0 0.7 0.25
NEW
Mar. 201806
