W717.B (11/15)1pulseelectronics.com
Automotive Chip Choke
EMI Suppression for CAN-Bus Networks
2-Line Common Mode Chokes
®
Meets AEC-Q200 Requirements
Suppression of common mode noise without
attenuating the signal
Magnetically shielded versions for lower Rdc
and higher current
USB 3.0 and other high speed differential signal
lines (IEEE1394, LVDS)
PE-1812ACCXXXSTS
Mechanical Schematic
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768
Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C
Part Number
Common Mode Impedance
(10MHZ)
Inductance
(uH)
Standard
Tolerance
RDC
(Ω Max)
IDC
(A MAX)Min Typ
PE-1812ACC110STS 300 600 11 +50/-30% 0.5 0.36
PE-1812ACC220STS 600 1200 22 +50/-30% 0.6 0.31
PE-1812ACC510STS 1500 3500 51 +50/-30% 1.0 0.23
PE-1812ACC101STS 3000 7500 100 +50/-30% 2.0 0.20
All Units in mm
14
23
4.5±0.2
3.2±0.2
3.8 ref
0.65 ref
0.7 ref
3.0 max
5.9
3.2
3.4
1.6
1
2
4
3
Weight ......................120 grams/reel
Tape & Reel ..................150/reel
W717.B (11/15)2pulseelectronics.com
Automotive Chip Choke
EMI Suppression for CAN-Bus Networks
2-Line Common Mode Chokes
®
PE-1812ACC110STS
Impedance vs Frequency Temp vs DC Current
0.1
1
10
100
1,000
10,000
110100 1,000
Frequency(MHz)
Impedance(Ω)
Common mode Differenal mode
0.0
10.0
20.0
30.0
40.0
50.0
60.0
0.00.2 0.40.6 0.
81
.0
IDC(A)
ːT(
℃)
ːT@25℃
0.1
1.0
10.0
100.0
1,000.0
10,000.0
110100 1,000
Frequency(MHz)
Impedance(Ω)
Common mode Differenal mode
0.0
10.0
20.0
30.0
40.0
50.0
60.0
0.00.2 0.40.6 0.8
IDC(A)
ːT(
℃)
ːT@25℃
PE-1812ACC220STS
0.1
1
10
100
1,000
10,000
110100 1,000
Frequency(MHz)
Impedance(Ω)
Common mode Differenal mode
0.0
10.0
20.0
30.0
40.0
50.0
60.0
0.00.2 0.40.6 0.81.0
IDC(A)
ːT(
℃)
ːT@25℃
0.1
1.0
10.0
100.0
1,000.0
10,000.0
110100 1,000
Frequency(MHz)
Impedance(Ω)
Common mode Differenal mode
0.0
10.0
20.0
30.0
40.0
50.0
60.0
0.00.2 0.40.6 0.8
IDC(A)
ːT(
℃)
ːT@25℃
W717.B (11/15)3pulseelectronics.com
Automotive Chip Choke
EMI Suppression for CAN-Bus Networks
2-Line Common Mode Chokes
®
PE-1812ACC101STS
Impedance vs Frequency Temp vs DC Current
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
0.00.1 0.20.3 0.40.5 0.60.7
IDC(A)
ːT(℃)
ːT@25℃
0.0
10.0
20.0
30.0
40.0
50.0
60.0
0.00 0.10 0.20 0.30 0.40 0.50
IDC(A)
ːT(
℃)
ːT@25℃
1.0
10.0
100.0
10,000.0
100,000.0
110100 1,000
Impedance(Ω)
Frequency(MHz)
Common mode Differenal mode
1.0
10.0
100.0
1,000.0
10,000.0
100,000.0
110100 1,000
Impedance(Ω)
Common mode Differenal mode
PE-1812ACC510STS
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
0.00.1 0.20.3 0.40.5 0.60.7
IDC(A)
ːT(℃)
ːT@25℃
0.0
10.0
20.0
30.0
40.0
50.0
60.0
0.00 0.10 0.20 0.30 0.40 0.50
IDC(A)
ːT(
℃)
ːT@25℃
1.0
10.0
100.0
10,000.0
100,000.0
110100 1,000
Impedance(Ω)
Frequency(MHz)
Common mode Differenal mode
1.0
10.0
100.0
1,000.0
10,000.0
100,000.0
110100 1,000
Impedance(Ω)
Common mode Differenal mode
W717.B (11/15)4pulseelectronics.com
Automotive Chip Choke
EMI Suppression for CAN-Bus Networks
2-Line Common Mode Chokes
®
Item Reference documents Test Condition Test Specification
1. High Temperature Exposure MIL-STD-202 Method 108 1. Temperature: 125�C
2. Time: 96 hours
1. No mechanical and electrical damage
2. Inductance shall not change more than ±30%
2. Temperature Cycling JESD22 Method JA-104
1. Temperature: 40�C~125�C
2. Number of cycles: 96 cycle
3.Dwell time: 30 minutes
1. No mechanical and electrical damage
2. Inductance shall not change more than ±30%
3. Biased Humidity Test MIL-STD-202 Method 103
1. Temperature: 85±5�C
2. Time: 96 hours
3. Humidity: 85±5% RH
1. No mechanical and electrical damage
2. Inductance shall not change more than ±30%
4. Operational Life MIL-PRF-27
1. Temperature: 125�C
2. Time: 96 hours
3. Apply rated current
1. No mechanical and electrical damage
2. Inductance shall not change more than ±30%
5. External Visual MIL-STD-883 Method 2009 Inspect product construction, marking and
workmanship
Per product specification standard
6. Physical Dimensions JESD22 Method JB-100 Verify physical dimensions to the applicable product
detail specification
Per product specification standard
7. Resistance to solvents MIL-STD-202 Method 215
Immerse into solvent for 3±0.5 minutes & brush 10
times for their cycles.
1. No body change in appearance
2. No marking blurred.
3. Inductance shall not change more than ±30%
8. Vibration Test MIL-STD-202 Method 204
1. Frequency and Amplified: 10-2000-10 Hz, 1.5mm
2. Direction: X, Y, Z
3. Test duration: 2 hours for each direction, 6 hours
in total
1. No mechanical and electrical damage
2. Inductance shall not change more than ±30%
9. Resistance to Soldering Heat Test MIL-STD-202 Method 210
1. Temperature: 250±5�C
2. Time: (temp.≥217�C) 60~150 Second
3. IR reflow times: 3 times
1. No mechanical and electrical damage
2. Inductance shall not change more than ±30%
10. Rated Current MIL-STD-202 Method 330 Apply rated current for 5 seconds. 1. No mechanical and electrical damage
2. Inductance shall not change more than ±30%
11. Temperature Rise MIL-PRF-27 Apply rated current for 10 minutes. 1. No mechanical and electrical damage
2. Inductance shall not change more than ±30%
12. Over load MIL-PRF-27 Apply twice as rated current for 5 minutes. 1. No mechanical and electrical damage
2. Inductance shall not change more than ±30%
13. Solderability Test J-STD-002
1. Bakeing in pre-testing: 155±5�C / 16Hours±30min.
2. Peak temperature: 240±5�C
3. Time: (temp.≥217�C) 60~150 Second
4. IR reflow times: 1 time
The terminal shall be at least 95% covered with fresh
solder.
14. Electrical Characterization User Spec. 1. Operating temperature:-40�C~125�C
2. Room Temperature: 25�C
1. No mechanical and electrical damage
2. Inductance shall not change more than ±30%
15. Withstanding Voltage Test MIL-STD-202 Method 201 1. DV: 500V
2. Time: 1 minute
1. During the test no breakdown.
2. The characteristic is normal after test.
16. Drop JESD22-B111 Package & Drop down from 1m. In 1 angle 1 ridge
& 2 surfaces orientation
1. No case deformation or change in appearance.
2. Inductance shall not change more than ±30%
17. Terminal Strength Test JIS-C-6429 1. Apply push force to samples mounted on PCB.
2. Force of 1.8 kg for 60±1 seconds.
After test, inductors shall be on mechanical damge.
Reliability Test
5pulseelectronics.com
Automotive Chip Choke
EMI Suppression for CAN-Bus Networks
2-Line Common Mode Chokes
W717.B (11/15)
®
For More Information
Pulse Worldwide
Headquarters
12220 World Trade Drive
San Diego, CA
92128
U.S.A.
Tel: 858 674 8100
Fax: 858 674 8262
Pulse Europe
Einsteinstrasse 1
D-71083 Herren-
berg
Germany
Tel: 49 7032 78060
Fax: 49 7032 7806 135
Pulse China Headquarters
B402, Shenzhen Academy of
Aerospace Technol-
ogy Bldg.
10th Kejinan Road
High-Tech Zone
Nanshan District
Shenzen, PR China
518057
Tel: 86 755 33966678
Fax: 86 755 33966700
Pulse North China
Room 2704/2705
Super Ocean Finance
Ctr.
2067 Yan An Road
West
Shanghai 200336
China
Tel: 86 21 62787060
Fax: 86 2162786973
Pulse South Asia
135 Joo Seng Road
#03-02
PM Industrial Bldg.
Singapore 368363
Tel: 65 6287 8998
Fax: 65 6287 8998
Pulse North Asia
3F, No. 198
Zhongyuan Road
Zhongli City
Taoyuan County 320
Taiwan R. O. C.
Tel: 886 3 4356768
Fax: 886 3 4356823 (Pulse)
Fax: 886 3 4356820 (FRE)
Performance warranty of products oered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2015. Pulse Electronics, Inc. All rights reserved.
Tape and Reel Specifications
Series Parts per Reel A B C D E W P1 P2 P3 H T
1812 ACC 500 178 60 13 17 14 12 2 8 4 4 0.35
Reel Dimensions (mm) Tape Dimensions (mm)
III. Description:
a. Ferrite drum core construction
b. Magnetically shielded
c. Enameled copper wire: H class
d. Product weight: 0.15g (ref.)
e. Moisture sensitivity Level 1
f. Products comply with RoHS’ requirements
g. Halogen Free available
IV. General specification:
a. Storage temp: -40�Cto+125�C
b. Operating temp: -40�Cto+125�C
(Temp. rise included)
c. Resistance to solder heat: 250�C 10 secs.
Recommended Solder Heat Resistance Profile
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Pulse:
PE-1812ACC220STS PE-1812ACC510STS PE-1812ACC110STS PE-1812ACC101STS