CSM_E2V_DS_E_2_1
1
All Metals and Long-distance Types
E2V
Aluminum and Iron Both Detectable
from Long Distances
1.5 to 2 times the
aluminum detection
distance of
previous models
Twice the max.
distance
Long-distance Long-distance
aluminum detectionaluminum detection
Long-distance
aluminum detection
Equipped with a
function to prevent
the detection of
aluminum chips
Aluminum chip
Aluminum chip
protection
protection
Aluminum chip
protection
Refer to Safety Precautions on page 8.
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Features
Aluminum Detection Distance: 1.5 to 2 Times Previous Models *
Immunity against aluminum chips has enabled achieving long-distance detection of aluminum workpieces. The same detection distance has also
been achieved for iron, allowing the E2V-X@ to be separated from workpieces made of either metal farther than any other Proximity Sensor.
* In-house comparison of M18 Shielded Long-distance Models
Detection Made Visible
An operation indicator that is visible from any direction is provided as a standard feature.
This indicator flashes under unstable conditions for easy installation condition verification at a glance.
Embeddable in Metal.
The first Long-distance Sensor that is shielded. Possible to be completely embedded in metal.
01234567
89
Excellent Performance, with Aluminum Chip Immunity!
01234567
89
Sensing distance (mm)
E2E
E2EM
E2EZ
E2EV
E2V
Aluminum Also Detects Iron at Long Distances!
Iron
×1.5
E2E
Standard Model
E2EM
Long-distance (Ferrous Metals)
E2EZ
Aluminum Chip Immunity
E2EV
All Metals
E2V
Sensing distance (mm)
Previous Sensor
Visible
The indicator
may be difficult
to see from
some
directions.
The indicator
is visible
from any
direction.
The indicator
is visible
from any
direction.
E2V Pre-wired Models
and Pre-wired Connector Models
E2V Connector Models
180°180°180°
Embedded Mounting in Metal
E2EM E2V
Workpiece
Protruding
distance
Bracket
Workpiece
E2V
2
Ordering Information
Sensors (Dimensions ➜ page 9)
Standard-distance type
DC 3-wire, Pre-wired Models (Standard Cable Length: 2 m)
Long-distance type
DC 3-wire, Pre-wired Models (Standard Cable Length: 2 m)
Long-distance type
DC 3-wire, Connector Models
Long-distance type
DC 3-wire, Smartclick Pre-wired Connector (M12) Models
Appearance Sensing distance Output Model
Operation mode NO Operation mode NC
M12 PNP E2V-X2B1 2M E2V-X2B2 2M
NPN E2V-X2C1 2M E2V-X2C2 2M
M18 PNP E2V-X5B1 2M E2V-X5B2 2M
NPN E2V-X5C1 2M E2V-X5C2 2M
M30 PNP E2V-X10B1 2M E2V-X10B2 2M
NPN E2V-X10C1 2M E2V-X10C2 2M
Appearance Sensing distance Output Model
Operation mode NO Operation mode NC
M12 PNP E2V-X4B1 2M E2V-X4B2 2M
NPN E2V-X4C1 2M E2V-X4C2 2M
M18 PNP E2V-X8B1 2M E2V-X8B2 2M
NPN E2V-X8C1 2M E2V-X8C2 2M
M30 PNP E2V-X15B1 2M E2V-X15B2 2M
NPN E2V-X15C1 2M E2V-X15C2 2M
Appearance Sensing distance Output Model
Operation mode NO Operation mode NC
M12 PNP E2V-X4B1-M1 E2V-X4B2-M1
NPN E2V-X4C1-M1 E2V-X4C2-M1
M18 PNP E2V-X8B1-M1 E2V-X8B2-M1
NPN E2V-X8C1-M1 E2V-X8C2-M1
M30 PNP E2V-X15B1-M1 E2V-X15B2-M1
NPN E2V-X15C1-M1 E2V-X15C2-M1
Appearance Sensing distance Output Model
Operation mode NO
M12 PNP E2V-X4B1-M1TJ 0.3M
NPN E2V-X4C1-M1TJ 0.3M
M18 PNP E2V-X8B1-M1TJ 0.3M
NPN E2V-X8C1-M1TJ 0.3M
M30 PNP E2V-X15B1-M1TJ 0.3M
NPN E2V-X15C1-M1TJ 0.3M
Shielded
2 mm
5 mm
10 mm
Shielded
4 mm
8 mm
15 mm
Shielded
4 mm
8 mm
15 mm
15 mm
Shielded
4 mm
8 mm
15 mm
15 mm
15 mm
E2V
3
Accessories (Order Separately)
Sensor I/O Connectors (M12, Sockets on One Cable End)
(Required for models with Pre-wired Connectors.) A Connector
is not provided with the Sensor. Be sure to order a Connector separately.
(Dimensions ➜ XS5)
Sensor I/O Connectors (M12, Sockets on One Cable End) Standard type (Required for models for Connectors.) A Connector is not
provided with the Sensor. Be sure to order a Connector separately.
(Dimensions ➜ XS2)
Appearance Type Cable length Model Applicable Proximity Sensor Models
Standard cable
2 m XS5F-D421-D80-F
E2V-X@B1-M1TJ
E2V-X@C1-M1TJ
5 m XS5F-D421-G80-F
Oil-resistant polyurethane
cable
2 m XS5F-D421-D80-P
5 m XS5F-D421-G80-P
Appearance Cable length Sensor I/O Connector
model number Applicable Proximity Sensor Models
2 m XS2F-D421-DC0-F E2V-X@C1-M1
E2V-X@B1-M1
5 m XS2F-D421-GC0-F
2 m XS2F-D421-D80-F E2V-X@C@-M1
E2V-X@B@-M1
5 m XS2F-D421-G80-F
2 m XS2F-D422-DC0-F E2V-X@C1-M1
E2V-X@B1-M1
5 m XS2F-D422-GC0-F
2 m XS2F-D422-D80-F E2V-X@C@-M1
E2V-X@B@-M1
5 m XS2F-D422-G80-F
Smartclick
Connector,
Straight
Straight
L-shape
E2V
4
Ratings and Specifications
* The response frequency is an average value.
Measurement conditions are as follows: Standard sensing object, a distance between target objects of twice the size of the standard sensing object, and a set distance
of half the sensing distance.
Size
M12
M18 M30
Item Model
E2V-X2
@@
E2V-X4
@@
E2V-X5
@@
E2V-X8
@@
E2V-X10
@@
E2V-X15
@@
Sensing distance 2 mm±10% 4 mm±10% 5 mm±10% 8 mm±10% 10 mm±10% 15 mm±10%
Set distance 0 to 1.6 mm 0 to 3.2 mm 0 to 4.0 mm 0 to 6.4 mm 0 to 8.0 mm 0 to 12.0 mm
Differential travel 10% max. of sensing distance
Detectable object Ferrous metals and non-ferrous metals (The sensing distance depends on the material of the sensing object. Refer to
Engineering Data (Reference value).)
Standard sensing
object
Aluminum:
12 × 12 × 3 mm
Aluminum:
12 × 12 × 3 mm
Aluminum:
18 × 18 × 3 mm
Aluminum:
24 × 24 × 3 mm
Aluminum:
30 × 30 × 3 mm
Aluminum:
45 × 45 × 3 mm
Response
frequency * 150 Hz 40 Hz 70 Hz 40 Hz 70 Hz 30 Hz
Power supply
voltage
(operating voltage
range)
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Current
consumption 450 mW max. (Current consumption: 15 mA max. at power supply voltage of 30 V)
Control
output
Load
current Open-collector output, 100 mA max.
Residual
voltage 2 V max. (Load current: 100 mA, Cable length: 2 m)
Indicators NO Models: Operation indicator (yellow) (flashing), Setting indicator (yellow) (lit); NC Models: Operation indicator (yellow)
(lit)
Operation mode B1/C1 Models: NO (Refer to the timing charts under I/O Circuit Diagrams for details.)
B2/C2 Models: NC
Protection circuits Power supply reverse polarity protection, reversed output polarity protection, load short-circuit protection, surge
suppressor
Ambient
temperature Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 95% (with no condensation)
Temperature
influence
Based on the sensing distance at 23°C in the temperature range of -25 to 70°C
±10% max. ±15% max. ±10% max. ±15% max. ±10% max. ±15% max.
Voltage influence ±1.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation
resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration
resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of
protection IEC IP67 (Pre-wired Models and Pre-wired Connector Models are oil-resistant to the OMRON in-house standard.)
Connection
method
Pre-wired Models (Standard cable length: 2 m), Connector Models, Pre-wired Connector Models (Standard cable length:
300 mm)
Weight
(packed
state)
Cable Approx. 120 g Approx. 150 g Approx. 200 g
Connector Approx. 30 g Approx. 45 g Approx. 120 g
Pre-wired
Connector
Models
Approx. 50 g Approx. 70 g Approx. 140 g
Materials
Case Nickel-plated brass
Sensing
surface Heat-resistant ABS
Clamping
nuts Nickel-plated brass
Toothed
washer Zinc-plated iron
Accessories Instruction manual
E2V
5
Engineering Data (Reference Value)
Influence of Sensing Object Size and Material
E2V-X2 E2V-X4 E2V-X5
E2V-X8 E2V-X10 E2V-X15
Influence of Sensing Object Size and Material
E2V-X2 E2V-X4 E2V-X5
Side length of sensing object d (mm)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0 5 10 15 20 25 30
Iron
Brass
Copper
X
t= 3 mm
Stainless steel (SUS304)
Sensing distance X (mm)
@
d
Aluminum
@
d
X
0 5 10 15 20 25 30
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Side length of sensing object d (mm)
Iron
Brass
Aluminum
Copper
t= 3 mm
Stainless steel (SUS304)
Sensing distance X (mm)
X
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
0 5 10 15 20 25 30 35 40
Side length of sensing object d (mm)
Iron
Brass
Aluminum
Copper
t= 3 mm
Stainless steel (SUS304)
Sensing distance X (mm)
@
d
X
0.0
2.0
4.0
6.0
8.0
10.0
0 5 10 15 20 25 30 35 40
Side length of sensing object d (mm)
Iron
Brass
Aluminum
Copper
t= 3 mm
Stainless steel (SUS304)
Sensing distance X (mm)
@
d
X
10 20 30 40 50 60
0.0
2.0
4.0
6.0
8.0
10.0
12.0
0Side length of sensing object d (mm)
Iron
Brass
Aluminum
Copper
t= 3 mm
Stainless steel (SUS304)
Sensing distance X (mm)
@
d
X
10 20 30 40 50 600
0.0
2.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
Side length of sensing object d (mm)
Iron
Brass
Aluminum
Copper
t= 3 mm
Stainless steel (SUS304)
Sensing distance X (mm)
@
d
t
X
0123456
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Thickness of sensing object: t (mm)
Iron
Brass
Aluminum
Copper
Stainless steel
(SUS304)
Sensing object size: 12 × 12 mm
Sensing distance X (mm)
t
X
0123456
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Thickness of sensing object: t (mm)
Iron
Brass
Aluminum
Copper
Stainless steel (SUS304)
Sensing object size: 12 × 12 mm
Sensing distance X (mm)
t
X
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
012345678
Thickness of sensing object: t (mm)
Iron
Brass
Copper
Stainless steel (SUS304)
Sensing object size: 18 × 18 mm
Sensing distance X (mm)
Aluminum
E2V
6
E2V-X8 E2V-X10 E2V-X15
Sensing Area
t
X
012345678
0.0
2.0
4.0
6.0
8.0
10.0
Thickness of sensing object: t (mm)
Iron
Brass
Aluminum
Copper
Stainless steel (SUS304)
Sensing object size: 24 × 24 mm
Sensing distance X (mm)
t
X
024681012
0.0
2.0
4.0
6.0
8.0
10.0
12.0
Thickness of sensing object: t (mm)
Iron
Brass
Aluminum
Copper
Stainless steel (SUS304)
Sensing object size: 30 × 30 mm
Sensing distance X (mm)
t
X
024681012
0.0
2.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
Thickness of sensing object: t (mm)
Iron
Brass
Stainless steel (SUS304)
Sensing object size: 45 × 45 mm
Sensing distance X (mm)
Aluminum
Copper
XY
-12.0 -9.0 -6.0 -3.0
0.0 3.0 6.0 9.0 12.0
0.0
2.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
E2V-X5@
E2V-X10@
E2V-X8@
E2V-X15@
Sensing area (Aluminum) (Thickness: 3.0 mm)
Sensing distance Y (mm)
Sensing distance X (mm)
E2V-X4@
E2V-X2@
XY
-12.0 -9.0 -6.0 -3.0
0.0 3.0 6.0 9.0 12.0
0.0
2.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
E2V-X15@
Sensing area (Iron) (Thickness: 3.0 mm)
Sensing distance Y (mm)
Sensing distance X (mm)
E2V-X10@
E2V-X5@
E2V-X8@
E2V-X4@
E2V-X2@
E2V
7
I/O Circuit Diagrams
NPN Output
PNP Output
Connections for Sensor I/O Connectors
Model Operation mode Timing charts Output circuit
E2V-X@C@
(-M1/-M1TJ)
NO
NC
Model Operation mode Timing charts Output circuit
E2V-X@B@
(-M1/-M1TJ)
NO
NC
Proximity Sensor Sensor I/O Connector
model number Connections
Type Operation
mode Model
DC 3-wire
NO E2V-X@C1-M1
E2V-X@B1-M1
NC E2V-X@C2-M1
E2V-X@B2-M1
Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details.
Sensing object
Rated
sensing
distance
(%) 100 0 80
Flashing
Stable sensing
area
Non-sensing
area
Unstable
sensing area
Set position
Proximity sensor
ON
OFF
ON
OFF
Yellow indicator
Control output
Proximity
Sensor
main
circuit
0 V
+V
Load
Note: Connector Models
NO Models:
NC Models:
Compatible Connector Cables: XS5F Series
XS2F Series
M1:
M1TJ:
Brown
Black
Blue
Sensing object
Rated sensing
distance
(%) 100 0
Non-sensing area
Proximity sensor
ON
OFF
ON
OFF
Sensing area
Yellow indicator
Control output
100 0 80
Sensing object
Rated
sensing
distance
(%)
Flashing
Stable sensing
area
Non-sensing
area
Unstable
sensing area
Set position
Proximity sensor
ON
OFF
ON
OFF
Yellow indicator
Control output
+V
0 V
Proximity
Sensor
main
circuit
Load
Brown
Black
Blue
Note: Connector Models
NO Models:
NC Models:
Compatible Connector Cables: XS5F Series
XS2F Series
M1:
M1TJ:
100 0
Sensing object
Rated sensing
distance
(%)
Non-sensing area
Proximity sensor
ON
OFF
ON
OFF
Sensing area
Yellow indicator
Control output
XS2F-D42@-@C0-F
1: Straight
2: L-shape
D: 2-m cable
G: 5-m cable
1
2
3
4
1
2
3
4
E2V
Main
Circuit
XS2F
Brown (+V)
Blue (0 V)
Black (Output)
XS2F-D42@-@80-F
1: Straight
2: L-shape
D: 2-m cable
G: 5-m cable
E2V XS2F
1
2
3
4
1
2
3
4
Brown (+V)
Blue (0 V)
White (Blank)
Black (Output)
Main
Circuit
E2V XS2F
1
2
3
4
1
2
3
4
Brown (+V)
Blue (0 V)
Black (Blank)
White (Output)
Main
Circuit
E2V
8
Safety Precautions
Refer to the Proximity Sensors Technical Guide.
This product is not designed or rated for ensuring
safety of persons. Do not use it for such purposes.
Never use the product with an AC power supply.
Otherwise, explosion may result.
Do not use the product in atmospheres or environments that exceed
product ratings.
Designing
Influence of Surrounding Metal
When embedding the Sensor in metal, be sure that the clearances given
in the following table are maintained.
Table 1. Influence of Surrounding Metal (Unit: mm)
* If the thickness of the mounting bracket (t) exceeds 5 mm, be sure to install
the Sensor so that ≥ 2, d (dia.) ≥ 45, and D ≥ 2.
Mutual Interference
When installing Sensors face-to-face or side-by-side, be sure that the
minimum distances given in table 2 are maintained.
Chart 2. Mutual Interference (Unit: mm)
Sensing Distance
•The sensing distance depends on the sensing object size,
material, and thickness.
•If the sensing object has a thickness of less than 1 mm, the sensing
distance will decrease.
•In some cases, it may not be possible to detect stainless steel.
Use the following graph and the Influence of Sensing Object Size
and Material information in Engineering Data (Reference Value) as
a reference.
Aluminum and Iron Cuttings
Normally aluminum or iron cuttings will not be detected even if they
adhere to or accumulate on the sensing surface. Detection signals
may be output for the following. If this occurs, remove the cuttings
from the sensing surface.
Diameter of cutting = d and diameter of sensing surface = D
Cuttings in center of sensing surface
with d ≥ 2/3D
(Unit: mm)
Tightening Torque
Do not tighten the nut with excessive force.
A washer must be used with the nut.
WARNING
Precautions for Correct Use
Item Model E2V-X2 E2V-X5 E2V-X10
000
d dia. 12 18 30
D000
m12 24 45
n18 27 45
Item Model E2V-X4 E2V-X8 E2V-X15
000 *
d dia. 12 18 30 *
D000 *
m12 24 45
n18 27 45
Item Model E2V-X2 E2V-X5 E2V-X10
A30 50 100
B20 30 50
Item Model E2V-X4 E2V-X8 E2V-X15
A35 60 120
B25 35 70
mn
t t t
mDd dia.
ℓ
ℓ
ℓ
A
B
Mode Size D
E2V-X2
@
/X4
@
10
E2V-X5
@
/X8
@
16
E2V-X10
@
/X15
@
28
Tightening Torque Part A Part B
Model Dimension (mm)
Torque Torque
E2V-X2/X4 17 5.9 N⋅m 9.8 N⋅m
E2V-X5/X8 22 15 N⋅m 45 N⋅m
E2V-X10/X15 26 39 N⋅m 78 N⋅m
d
DSensing
surface
Cutting Cutting
Pressed against
sensing surface.
Part B Part A
(Shielded Model)
E2V
9
Dimensions
Sensors
Pre-wired Models
Pre-wired Connector Models
(Unit: mm)
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
4
M12 × 1
4760
17
21 dia.
Two clamping nuts
Toothed washer
Indicator *1
6-dia. vinyl-insulated round cable
with 3 conductors
(Conductor cross section: 0.5 mm
2
,
Insulator diameter: 1.9 mm),
Standard length: 2 m
E2V-X2/X4
24 42
60
52
4
M18 × 1 Two clamping nuts
Toothed washer
Indicator *1
6-dia. vinyl-insulated round cable
with 3 conductors
(Conductor cross section: 0.5 mm
2
,
Insulator diameter: 1.9 mm),
Standard length: 2 m
29 dia.
E2V-X5/X8
5
36 42
60
52
M30 × 1.5 Two clamping nuts
Toothed washer
Indicator *1
6-dia. vinyl-insulated round cable
with 3 conductors
(Conductor cross section: 0.5 mm
2
,
Insulator diameter: 1.9 mm),
Standard length: 2 m
*1 NO Models: Operation indicator (yellow) (flashing)
Setting indicator (yellow) (ON)
NC Models: Operation indicator (yellow) (ON)
42 dia.
E2V-X10/X15
4
17 4760
M12 × 1 M12 × 1
Two clamping nuts
Toothed washer
Indicator *1
6-dia. vinyl-insulated round cable
Standard length: 300 mm
21 dia.
E2V-X4-M1TJ
4
24
42
60
52
M18 × 1 M12 × 1
Two clamping nuts
Toothed washer
Indicator *1
6-dia. vinyl-insulated round cable
Standard length: 300 mm
29 dia.
E2V-X8-M1TJ
5
*1 NO Models: Operation indicator (yellow) (flashing)
Setting indicator (yellow) (ON)
NC Models: Operation indicator (yellow) (ON)
36 42
60
52
M30 × 1.5
M12 × 1
Two clamping nuts
Toothed washer
Indicator *1
6-dia. vinyl-insulated round cable
Standard length: 300 mm
42 dia.
E2V-X15-M1TJ
E2V
10
Connector Models
Mounting Hole Dimensions
G
A
E
FC
B
D
M12 × 1
Four indicators *1
Two clamping nuts
Toothed washer
*1 NO Models: Operation indicator (yellow) (flashing)
Setting indicator (yellow) (ON)
NC Models: Operation indicator (yellow) (ON)
Model
Item E2V-X4@-M1 E2V-X8@-M1
E2V-X15
@
-M1
AM12 × 1 M18 × 1 M30 × 1.5
B65 60 63
C47 42 42
D52 47 49
E 21 dia. 29 dia. 42 dia.
F17 24 36
G4 4 5
Ｈ
Proximity Sensor dimensions M12 M18 M30
Dimension H (mm) 12.5 dia. 18.5 dia. 30.5 dia.
+0.5
0
+0.5
0
+0.5
0
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2014.1
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2014 All Right Reserved.
