SONG CHUAN
133
832
Approx. 22g (open type)ˣ27g (832A)ˣ36g (832AWP)ˣ38g (832AW) Weight
Operating extremes 10焍55Hz , amplitude 1.5 mm
Vibration resistance
Damage limits 10焍55Hz , amplitude 1.5 mm
Operating extremes 10G
Shock resistance
Damage limits 100G
10,000,000 ops.
5,000,000 ops. (for 832/832A H/BH)
Mechanical
(frequency 18,000 ops./hr)
100,000 ops. (frequency 1,200 ops./hr)
Life expectancy
20,000 ops. for 20A/250VAC
832/832A H/BH series :
100,000 ops. for 10A/250VAC
Electrical
(frequency 900 ops./hr)
Operating ambient temperature -55焍+85°C (no freezing)
15 ms Max.
Operate time (1)
20 ms Max. (for 832/832A H/BH)
10 ms Max.
Release time (1)
5 ms Max. (for 832/832A H/BH)
Note 烉(1) Initial value. Operate and release time excluding contact bounce.
(2) Unless otherwise specified, all tests are under room temperature and humidity.
(3) Consider the heat of PCB is necessary, please check the actual condition of PCB.
(4) Applying no diode to this relay. The life expectancy will be lower when a diode is used. To use
a varistor (ZNR) could absorb the coil surge of relay that is recommended.
(5) Do not use the relay exceeding the coil rating, contact rating and life expectancy, or this may cause
the risk of overheating.
(6) To assure optimum performance, avoid the relay from dropping, hitting, or other unnecessary shocks.
(7) Do not switch the contacts without any load as the contact resistance may become increased rapidly.
(8) Flux tight version is recommended. If there is cleaning process and sealed type is selected,
the vent-hole should be removed after the process.
(9) Use suitable harnesses and bus bars according to the current as below︰
20A type︰Min. 3.0 mm
30A type︰Min. 6.0 mm
(10) Usage, transport and storage conditions
焍+85°C
within the range indicated in the graph below.
(11) Please contact Song Chuan for the detailed information.
2
2
Tolerance range
Humidity, RH
(Avoid freezing
when used at
temperatures
lower than 0°C)
(Avoid
condensation
when used at
temperatures
higher than 0°C )
Temperature, °C