Table of Contents Amphenol(R)/Pyle(R) MIL-C-26500 Miniature Cylindrical Connectors Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . Insert Arrangements, Alternate Keying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page . . 1 . . 2 . . 3 . . 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum/Stainless Steel MIL-C-26500 Connectors Product Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flange Mounted Receptacle, threaded coupling MS24264( )XXT D-Hole Mounted Receptacle, threaded coupling MS24265( )XXT Straight Plug, threaded coupling . . . . . . . . MS24266( )XXT Flange Mounted Receptacle, bayonet coupling . MS24264( )XXB D-Hole Mounted Receptacle, bayonet coupling . MS24265( )XXB Straight Plug, bayonet coupling . . . . . . . . . MS24266( )XXB Non-Decoupling, Ratchet Lock Plug . . . . . . . . . . . . . . . . Ratchet Lock Plug and Mating Flange Receptacle . . . . . . . . . 5, 6 7,8 . 9 10 11 12 13 14 15 16 Amphenol 48 Series MIL-C-26500 Connectors Receptacle Short Skirt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Wire Splice Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Firewall, Class K MIL-C-26500 Connectors Product Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flange Mounted Receptacle, threaded/bayonet coupling . MS27613KXXT or B. D-Hole Mounted Receptacle, threaded/bayonet coupling . MS27614KXXT or B. Straight Plug, threaded/bayonet coupling . . . . . . . . . MS27615KXXT or B. Ratchet Lock Plug and Non-Decoupling Straight Plug, threaded coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 20 . 21 . 22 . 23 . 24 . 25 Hermetic MIL-C-26500 Connectors General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Contacts and Accessories for MIL-C-26500 Connectors Crimp Contacts, Special Application Contacts, Sealing Plugs, Sealing Gaskets Shielded/Coaxial Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact Termination Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact Termination Tools (48 Series) . . . . . . . . . . . . . . . . . . . . . Assembly Instructions (Contact Termination/Insertion/Removal) . . . . . . . . Cable Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dummy Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Protection Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sales Office Listing If more information is needed concerning the connectors covered in this publication, or if there are special application needs, please contact: Amphenol Corporation Amphenol Aerospace 40-60 Delaware Avenue Sidney, New York 13838-1395 Telephone: 607-563-5011 Fax: 607-563-5351 Website: www.amphenol-aerospace.com Amphenol is a Certified ISO 9001 Manufacturer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 28, 29 . . 30 . . 31 32, 33 34, 35 . . 36 . . 37 Amphenol(R) /Pyle(R) MIL-C-26500 Connectors - environmental connectors for military/aerospace applications High quality and dependability are the earned reputations of the Amphenol(R)/Pyle(R) Series of connectors designed to meet the specification requirements of MIL-C-26500. Serving such diverse fields as avionics, missile systems, aircraft general-purpose applications, aircraft engines and firewalls, the Amphenol(R)/Pyle(R) MIL-C-26500 connector family meets the myriad of problems with innovative connector solutions. Amphenol (R) /Pyle (R) MIL-C-26500 Connectors are medium sized connectors with a rugged design, lightweight construction and continuously dependable performance. This product family provides design features and options which are listed below in the order of the sections of this catalog. * Aluminum Shells in threaded or bayonet coupling, proprietary (ZZY or ZZW), or supplied to military classes R and G * general purpose, environmentally resistant * square flange or single hole receptacles, and straight plug shell styles * ratchet lock plug style, which eliminates the need for safety wiring, and a mating threaded receptacle * black anodize non-conductive finish for class R and a conductive finish in class G that provides a minimum resistance path through the shell for grounding purposes * coupling nuts are hardcoat treated for added protection against wear * rear accessory threads accommodate standard MS27291 series cable supports or related accessory hardware * Stainless Steel Shells in threaded or bayonet coupling, proprietary (ZZY or ZZW), or supplied to military class E * machined from 300 series stainless steel providing superior strength and wear characteristics * at elevated temperatures, 204C (399F), shells experience a less than 10% loss in yield strength * shell hardware resists corrosion for the life of the connector without the need of additional finishes * same shell styles offered as in aluminum * a variety of stainless steel accessories are available * Amphenol special application connector, 48 Series* receptacle short skirt * low profile design for restricted installation requirements * Wire splice connector * space saving, single contact, wire splice module * Firewall Capability Connectors meet the fireproof requirements of MIL-C-5015, Class K. Proprietary (FPK or FYL), or supplied to military Class K * also FPL - threaded coupling, same as FPK but used on Lockheed Aircraft. and FP5K - threaded coupling, qualified for General Electric * non-magnetic stainless steel shells designed for superior strength and elevated temperatures up to 460F for extended periods * same shell styles as stainless steel and aluminum versions * Hermetically sealed MIL-C-26500 connectors, supplied to military class H are also available. * See page 26 for brief description * See page 4 for hermetic insert availability * Consult Amphenol, Sidney, NY for availability and ordering information. * Contacts and Accessories for MIL-C-26500 connectors * MIL-C-39029 qualified contacts and special application contacts including thermocouple, printed circuit board and shielded/coaxial types * Boeing specification contacts * Aluminum and stainless steel cable supports; aluminum dummy receptacles * Contact crimping/ installation/removal tools for Amphenol 48 series and Pyle-National MIL-C-26500 series * For more information on other Amphenol(R)/Pyle(R) 48 Series products consult Amphenol, Sidney, NY. 1 MIL-C-26500 Connectors features Connector Sealing Amphenol(R)/Pyle(R) MIL-C-26500 Connectors are qualified to Military Specification MIL-C-26500, as well as numerous high performance customer specifications. As the chart below indicates, these connectors are available with aluminum or stainless steel shells - bayonet or threaded - and are qualified to meet the specifications of these MIL-C-26500 classes: MIL-C-26500 Classes Amphenol/ Pyle Series Classes Hardware Description The insert design utilizes a combination of resilient and rigid insulators to offer a connector with total sealing capabilities. Bonded interfaces between the resilient and rigid dielectric components eliminate air voids and thus protect the connector from potential degradation due to moisture and altitude conditions. In Firewall Class K connectors the resilient insert forms the primary contact seal and is bonded to a molded ceramic rigid insert. The insert assembly is physically bonded and mechanically retained to the inside surface of the stainless steel shell, providing a voidless, monoblock configuration impervious to adverse environments. Finish Class R: (Environmental Resistant) A Aluminum Alloy Anodize Class G M Aluminum Alloy Chromium Class E R Stainless Steel Passivated Class K Firewall FPK/FYL Stainless Steel Passivated Class H Hermetic HC CRS/Stainless Steel Various A pressure seal at the connector interface is accomplished through the aid of a coupling device which compresses the front resilient insulations and thus offers a seal around each contact which prevents the passage of air or moisture through the contact cavity. Back resilient insulators are designed with a triple sealing grip at each wire hole to offer positive sealing and prevent wicking of moisture through the connector without the use of external clamping rings or adapters. Crimp Contacts Rear insertable, front releasable, crimp style contacts are machined from a copper alloy material, plated gold over nickel, and are qualified to specification MIL-C-39029. Contacts are crimp terminated outside the connector assembly and inserted into the appropriate cavity by means of a hand tool. In addition, a dynamic "O" ring seal engages the front of the plug shell when connectors are mated and offers yet another barrier to moisture and containments. Socket contacts utilize a multi-tined construction and feature a "C" spring which grips the tines, and thus insures consistent and repetitive insertion/withdrawal forces. Contact tines are protected by a stainless steel shroud. An optional pencil-clip thermocouple socket design is also offered. See page 27 for more information on thermocouple contacts. Fluid/Temperature Resistance The fluorosilicone compound elastomer, developed by PyleNational, exceeds all specification requirements and provides excellent resistance to tear, compression set, fluids, and high temperatures. Amphenol/Pyle's fluorosilicone compound offered in Class R, G, E and K is capable of reliability resisting MIL-H-5606 hydraulic fluid and MIL-L-9236 lubricating oil; as well as MIL-L-7808 and MIL-L-23699 lubricating oils, MIL-J-5624 (JP-5) jet fuel, glycol, and alkaline cleaning solutions of pH 10 or higher. Test methods are as defined in MIL-C-26500 specification. Alternate compounds have been developed by Pyle-National to solve unique user requirements not addressed by the specifications. Alternate Keying All MIL-C-26500 Series Connectors with aluminum and stainless steel hardware, can be furnished with normal or any of five alternate key positions. (See page 4). Each plug shell has a master key and four alternate keys. The position of the alternate keys in relation to the fixed master key determines the key identification. Inserts are bonded to the shell in relation to the master key, thus allowing positive protection against mismating when differing circuits exist side by side. Connectors have the capability of resisting high ambient temperatures up to 200C (392F) for long periods of time, thus contributing to an extended connector life. Connectors will withstand a combined ambient and internal temperature due to thermal rise of current carrying capacity of 238C (469F). Amphenol(R)/Pyle(R) Firewall, Class K, connectors have the inherent ability to resist high temperatures up to 460F (total temperature) for extended periods of time and can resist short time exposures (20 minutes) to prevent passage of a direct 2000F flame. 2 MIL-C-26500 specifications TEST REQUIREMENTS MILITARY SPECIFICATIONS PYLE CONNECTOR CAPABILITIES Air Leakage (Classes E, G, R & K) 1 cu. inch per hr. max. -55C (-67F) Comply Altitude Immersion (Classes E, G, R & K) Sea level 1 inch of mercury, 3 cycles (IR 5000 megohms hi-pot 1500 volts-submerged) Comply Contact Retention (Classes E, G, R & K) Size 20 contact 20 lbs. min. Size 16 contact 25 lbs. min. Size 12 contact 30 lbs.min. Exceeds specifications Collet Retention No requirement Without damage to the collet or its retention means: Size 20 - 75 lbs. min. Size 16 - 140 lbs. min Size 12 - 160 lbs. min. Contact Insertion Force (Classes E, G, R & K) All size contacts 10 lbs. max. Comply Coupling Forces Torque required to couple and uncouple mating plugs and receptacles is not to exceed the values listed: 8 10 12 14 16 18 20 22 24 Shell size Torque inch lbs. 9 10 14 17 23 26 31 38 46 Comply Fluid Resistance (Classes E, G, R & K) 20 hrs. immersion in MIL-H-5606 hydraulic fluid and MIL-L-9236 lubrication oil. Must meet hi-pot. 20 hrs. min., fully functional physically and electrically after immersion. No deterioration of resilient material. Ground Resistance (Class G) .250 ohms backshell of plug to rear of receptacle flange. Comply High Potential (Classes E, G, R & K) 1500 VRMS mated & unmated at sea level 1000 VRMS mated to 110,000 ft. altitude Exceed with ample margin of safety. Insert Retention (Classes E, G, R & K) 75 psi. from either direction for 5 seconds. Exceeds specifications. Insulation Resistance (Classes E, G, R & K) 21C (70F), 5000 megohms between adjacent contacts and any contact and shell. Exceeds specifications. Low Temperature (Classes E, G, R & K) -55C (-67F) Comply Magnetic Permeability (Classes E, G, R & K) 2 mu. maximum Comply Moisture Resistance (Classes E, G, R & K) 1000 megohms min. per mil-std. 202 method 106 Comply Ozone Exposure (Classes E, G, R & K) 0.10 to .015% ozone exposure Comply Physical Shock (Classes E, G, R & K) 50 G's, 3 axis, per mil-std-202, method 213, test condition C, wired to monitor 1 microsecond discontinuity. Comply Sand & Dust Exposure (Classes E, G, R & K) No requirement. Meet MIL-E-5272 condition "B" Temperature Life (Classes E, G, R & K) Connector fully functional for 1000 hours at 200C (392F) ambient internal temperature 238C (460F) Comply Thermal Shock (Mated) (Classes E, G, R & K) Cycled five times from -55C to 260C, held for 30 minutes at each temperature and transferred to the other in 2 minutes or less, with no evidence of damage. Comply Vibration (Classes E, G, R & K) MIL-Std. 202 method 204 condition "D" at R. T., -55C (-67F) and +200C (+392F). Comply - monitored for a max. of 1 microsecond discontinuity. Flame Resistance (Class K) Performance requirements of Paragraph 4.5.18 Fireproof (Class K of MIL-C-5015D) Exceeds specifications 3 MIL-C-26500 insert arrangements Rear face of pin insert shown (socket insert opposite). Symmetrical about center line. designates Non-MS Configurations. K designates Firewall Class K inserts. H designates Hermetic inserts. Contact cavities are identified with a spiral guide line indicating cavity sequence. The first and last cavities are numbered and every tenth cavity is bracketed. 08-02 08-03H 10-02 10-05H 10-20H 12-03 K H 12-12H 14-03 14-04 K 14-07 K H 14-12 14-15 K H 2 # 20 3 # 20 2 # 20 5 # 20 2 # 16 3 # 16 12 # 20 1 #1 shielded 2 # 16 4 # 12 7 # 16 9 # 20 3 # 16 15 # 20 16-10 K H 16-24 K H 18-8K H 18-11 18-14 K H 18-31 K H 20-16 20-25 20-28 10 # 16 24 # 20 8 # 12 1 #1 shielded 10 # 16 14 # 16 31 # 20 16 # 16 19 # 20 6 # 12 24 # 20 4 # 12 20-39 20-41 22-12 K 22-19 K H 22-27 22-32 22-55 K H 37 # 20 2 # 16 41 # 20 12 # 12 19 # 16 27 # 16 26 # 20 6 # 12 55 # 20 24-30 K 24-43 24-57 24-61 28-40 K 28-42 K 30 # 16 23 # 20 20 # 16 2 # 12 55 # 20 61 # 20 4 # 12 36 # 16 42 # 16 Alternate Keying ALTERNATE POLARITY KEYWAY ARRANGEMENTS (Shell sizes 12, 14, 16, 18, 20, 22, 24, 28) View of front face of receptacle shell. Angles are counter-clockwise from "N" keyway. For plug shell, the key locations are clockwise when viewed from front of plug. For Connectors Size 8 and 10 Position For Connectors Size 12, 14, 16, 18, 20, 22, 24 and 28 A B C D A B C D Normal 105 140 215 265 105 140 215 265 6 102 132 248 320 18 149 192 259 7 80 118 230 312 92 152 222 342 8 35 140 205 275 84 152 204 334 9 64 155 234 304 24 135 199 240 Y or 10* 25 115 220 270 98 152 268 338 * Y is used for all Military part number callouts - aluminum/stainless steel and firewall; 10 is used for Amphenol/Pyle part number callouts - aluminum/stainless steel only. (See how to order pages 7, 8 and 21). 4 MIL-C-26500 aluminum/stainless steel, threaded/bayonet coupling THREADED COUPLING PYLE ZZY MS2426X( )TXX Shell Style (Stainless Steel pictured) Square Flange Mounted Receptacle Threaded Coupling Single Hole (D-Hole) Mounted Receptacle Threaded Coupling Straight Plug Threaded Coupling Basic Performance Level Hardware Description* General Purpose, Environmental Resistant Aluminum Superior Strength, Corrosion Resistance up to 204C (399F) Stainless Steel General Purpose, Environmental Resistant Aluminum Superior Strength, Corrosion Resistance up to 204C (399F) Stainless Steel General Purpose, Environmental Resistant Aluminum Superior Strength, Corrosion Resistance up to 204C (399F) Class* Basic Part Number** Military Class R or G MS24264(R or G)XXTXX Pyle A or M Series ZZY-(A or M)X-17XX Military Class E MS24264EXXTXX Pyle R Series ZZY-RX-17XX Military Class R or G MS24265(R or G)XXTXX Pyle A or M Series ZZY-(A or M)X-15XX Military Class E MS24265EXXTXX Pyle R Series ZZY-RX-15XX Military Class R or G MS24266(R or G)XXTXX Pyle A or M Series ZZY-(A or M)X-10XX Military Class E MS24266EXXTXX Pyle R Series ZZY-RX-10XX Stainless Steel BAYONET COUPLING PYLE ZZW MS2426X( )BXX Shell Style (Stainless Steel pictured) Square Flange Mounted Receptacle Bayonet Coupling Single Hole (D-Hole) Mounted Receptacle Bayonet Coupling Straight Plug Bayonet Coupling Basic Performance Level Hardware Description* General Purpose, Environmental Resistant Aluminum Superior Strength, Corrosion Resistance up to 204C (399F) Stainless Steel General Purpose, Environmental Resistant Aluminum Superior Strength, Corrosion Resistance up to 204C (399F) Stainless Steel General Purpose, Environmental Resistant Aluminum Superior Strength, Corrosion Resistance up to 204C (399F) Class* Basic Part Number** Military Class R or G MS24264(R or G)XXBXX Pyle A or M Series ZZW-(A or M)X-17XX Military Class E MS24264EXXTXX Pyle R Series ZZW-RX-17XX Military Class R or G MS24265(R or G)XXBXX Pyle A or M Series ZZW-(A or M)X-15XX Military Class E MS24265EXXTXX Pyle R Series ZZW-RX-15XX Military Class R or G MS24266(R or G)XXBXX Pyle A or M Series ZZW-(A or M)X-10XX Military Class E MS24266EXXTXX Pyle R Series ZZW-RX-10XX Stainless Steel NA designates not available * See how to order, page 7, for further description of hardware classes. ** See how to order, page 7, to complete part numbers. 5 MIL-C-26500 aluminum/stainless steel ratchet lock coupling RATCHET LOCK PLUG PYLE ZZY Shell Style (Stainless steel only) Ratchet Lock Plug Non-Decoupling Basic Performance Level Hardware Description* Superior Strength, Corrosion Resistance up to 204C (399F) Employs ratchet feature in last 180 of rotation to eliminate need for safety-wiring Stainless Steel only Class* Basic Part Number** Pyle R Series (Proprietary only) ZZY-RX-12XX * See how to order, page 7, for further description of hardware classes. ** See how to order, page 7, to complete part numbers. RATCHET LOCK PLUG & MATING FLANGE MOUNTED, THREADED RECEPTACLE PYLE ZZY Shell Style (Stainless steel pictured) Ratchet Lock Plug Non-Decoupling Square Flange Mounted Receptacle Threaded Coupling Basic Performance Level Hardware Description* Designed to meet high vibration requirements beyond MIL-C-26500. Designed to meet high vibration requirements beyond MIL-C-26500. * See how to order, page 8, for further description of hardware classes. ** See how to order, page 8, to complete part numbers. 6 Class* Pyle Basic Part Number** Aluminum Pyle A Series ZZY (A or F) X-12 (D, E or F) XX Stainless Steel Pyle R Series ZZY-RX-12 (D, E or F)XX Aluminum Pyle A Series ZZY (A or F) X-17(D, E or F) XX Stainless Steel Pyle R Series ZZY-RX-17 (D, E or F) XX MIL-C-26500 - how to order aluminum/stainless steel, threaded/bayonet/ratchet lock coupling Military Designation Sample ordering number: MS24266 R 22 T 55 P 6 Shell Style MS24264 - Square Flange Receptacle MS24265 - Single Hole Mounting Receptacle MS24266 - Straight Plug Alternate Keying 6, 7, 8, 9, Y (N for normal) See page 4 Contact Type Pin - P Socket - S Class R - Aluminum, non-conductive (black anodize finish) G - Aluminum, conductive (chromium finish) E - Stainless steel, passivated Insert Arrangement (See chart, page 4) Coupling Type Threaded - T Bayonet - B Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24 Amphenol(R)/Pyle-National(R) Designation Sample ordering number: ZZY - A C - 10 22 - 55 P 06 D - HXX Variations Hardware Deviation - HXX Insert Deviation - AXX Shell Style ZZY - Threaded Coupling ZZW - Bayonet Coupling Contact Plating Gold - D Rhodium - T Class A - Aluminum, non-conductive (black anodize finish) M- Aluminum, conductive (chromium finish) R - Stainless steel, passivated Alternate Keying 06, 07, 08, 09, 10 (omit for normal) See page 4 Accessories* No Digit - with contacts and cable support C - without cable support, with contacts D - without contacts, with cable support O - without contacts or cable support Contact Type Pin - P Socket - S Insert Arrangement See chart, page 4 Shell Style 10 - Straight Plug 12 - Non-Decoupling (Ratchet Lock) 15 - Single Hole Mounting Receptacle 17 - Square Flange Receptacle Shell Size 8, 10, 12, 14, 16, 18, 20, 22, 24, 28 * Accessory threads for aluminum and stainless steel hardware differ, and care should be taken in selection of alternate accessory hardware that will conform to the threads noted in the dimensional tables within this catalog. 7 MIL-C-26500 - how to order aluminum/stainless steel, ratchet lock plug, mating flange receptacle Additional features include: Amphenol(R)/Pyle(R) connectors are specifically designed to meet high vibration requirements above and beyond the specification requirements of MIL-C-26500. The plug connector features a unique nondecoupling device which offers a ratchet mechanism designed to engage as the threaded connectors approach a bottomed condition. Connector coupling assembly continues to ratchet for approximately 120 degrees until the mated connectors reach a complete metal-to-metal bottomed condition. The ratchet device maintains the connectors in a fully coupled condition, thus eliminating the need for safety wiring. * Modified accessory thread to accommodate MIL-C-83723 backshell hardware. * Rear accessory teeth are featured on both the plug and receptacle shell to assure non-rotation of accessory hardware * Intermateable with all MIL-C-26500 threaded connectors of like insert arrangement and key position Amphenol(R)/Pyle-National(R) Designation Sample ordering number: ZZY - A C - 12 D 14 - 04 P Shell Style ZZY - Threaded Coupling 06 D Contact Finish Gold plate per MIL-C-39029 - D Rhodium plate per MIL-C-26636 - T Series A - Anodized Aluminum Shell R - Stainless Steel, passivated F - Clear Cadmium plated Aluminum Shell Alternate Key Position 06, 07, 08, 09, 10 (omit for normal) See page 4 Contact Type Pin - P Socket - S Contacts & Accessories No Digit - with contacts, with clamp C - with contacts O - without contacts Insert Arrangement See chart, page 4 Shell Style 12 - Non-Decoupling Plug, Ratchet Lock 17 - Square Flange Receptacle Shell Size 10, 12, 14, 16, 18, 20, 22, 24, 28 Accessory Size* Rear accessories per MIL-C-83723 - D Rear accessories per MS 3155 - E Rear accessories per MS 3155 with EMI Band - F * Accessory threads for aluminum and stainless steel hardware differ, and care should be taken in selection of alternate accessory hardware that will conform to the threads noted in the dimensional tables within this catalog. 8 Flange Mounted Receptacle aluminum/stainless steel threaded coupling STAINLESS STEEL Pyle ZZY-RC-17XX* Series MS24264EXXTXX* Military Class E ALUMINUM Pyle ZZY-AC-17XX* Series MS24264RXXTXX* Military Class R * To complete order number, see how to order, page 7. Cable Support Thread M Shell Size 08** Steel NS-2A Alum. UNEF-2A Modified Aluminum Connector Weight (lbs.) max including Contacts Pin Insert Socket Insert Coupling Thread R Flange Width S .005 Mounting Hole Centers T .005 Back Mount Min. Hole Y Front Mount Min. Hole Z NA .437-28 .025 .026 .562-24 .812 .594 .606 .443 10 .563-36 .562-24 .042 .044 .687-24 .937 .719 .748 .572 12 .733-36 .750-20 .061 .062 .875-20 1.031 .812 .913 .760 14 .803-36 .812-20 .072 .074 .937-20 1.125 .906 .980 .822 16 .930-36 .937-20 .087 .090 1.062-18 1.250 .969 1.107 .948 18 1.036-36 1.062-18 .110 .112 1.187-18 1.343 1.062 1.209 1.072 20 1.161-36 1.187-18 .130 .134 1.312-18 1.437 1.156 1.325 1.197 22 1.286-36 1.312-18 .152 .159 1.437-18 1.562 1.250 1.452 1.322 24 1.411-36 1.437-18 .181 .188 1.562-18 1.703 1.375 1.577 1.448 28 1.661-36 NA NA NA 1.812-16 2.000 1.562 1.827 1.700 NA designates not available. ** Not available in Stainless Steel. All dimensions for reference only. Not available in Aluminum. 9 D-Hole Mounted Receptacle aluminum/stainless steel threaded coupling STAINLESS STEEL Pyle ZZY-RC-15XX* Series MS24265EXXTXX* Military Class E ALUMINUM Pyle ZZY-AC-15XX* Series MS24265RXXTXX* Military Class R * To complete order number, see how to order, page 7. Cable Support Thread M Aluminum Connector Weight (lbs.) max including Contacts Lock Nut Flats T Socket Insert Coupling Thread R Flange Width S .005 Steel Shell Size Steel NS-2A Alum. Mounting Hole Dia. Y 08 NA NA NA NA NA NA NA NA NA NA NA 10 .563-36 .562-24 .049 .050 1.171-24 1.104 .937 .937 .760 .730 36 56 12** Pin Insert Mounting Hole Flat Z Rec. min. Torque Jam Nut Inch/Lbs. Alum. UNEF-2A Modified NA .750-20 .069 .070 .875-20 1.291 1.125 1.125 .947 .917 14 .803-36 .812-20 .087 .089 .937-20 1.391 1.062 1.187 1.010 .980 65 16 .930-36 .937-20 .104 .106 1.062-18 1.516 1.187 1.312 1.135 1.105 69 18 1.036-36 1.062-18 .131 .133 1.187-18 1.614 1.312 1.437 1.260 1.225 81 20 NA NA .152 .157 NA NA NA NA NA NA 100 22 1.286-36 1.312-18 .181 .187 1.312-18 1.954 1.562 1.687 1.510 1.475 123 24 1.411-36 1.437-18 .208 .212 NA NA NA NA NA NA 133 28 NA NA NA NA NA NA NA NA NA NA NA NA designates not available. ** Not available in Stainless Steel. All dimensions for reference only. 10 Straight Plug aluminum/stainless steel threaded coupling STAINLESS STEEL Pyle ZZY-RC-10XX* Series MS24266EXXTXX* Military Class E ALUMINUM Pyle ZZY-AC-10XX* Series MS24266RXXTXX* Military Class R * To complete order number, see how to order, page 7. Cable Support Thread M Aluminum Connector Weight (lbs.) max including Contacts Coupling Nut Dia S Max. Socket Insert Coupling Thread R Steel Shell Dia. T +.000 -.005 Shell Size Steel NS-2A Alum. UNEF-2A Modified 08** NA .437-28 .030 .031 .562-24 NA .776 .424 10 .563-36 .562-24 .044 .045 .687-24 .826 .906 .526 12 .733-36 .750-20 .063 .064 .875-20 .996 1.078 .696 14 .803-36 .812-20 .074 .076 .937-20 1.066 1.141 .765 16 .930-36 .937-20 .091 .094 1.062-18 1.193 1.266 .892 18 1.036-36 1.062-18 .110 .112 1.187-18 1.299 1.375 .998 20 1.161-36 1.187-18 .133 .136 1.312-18 1.424 1.510 1.123 22 1.286-36 1.286-18 .154 .160 1.437-18 1.549 1.625 1.248 24 1.411-36 1.437-18 .184 .188 1.562-18 1.674 1.670 1.373 28 1.661-36 NA NA NA 1.812-16 1.912 NA 1.623 Pin Insert NA designates not available. ** Not available in Stainless Steel. All dimensions for reference only. 11 Not available in Aluminum. Alum. Flange Mounted Receptacle aluminum/stainless steel bayonet coupling STAINLESS STEEL Pyle ZZW-RC-17XX* Series MS24264EXXBXX* Military Class E ALUMINUM Pyle ZZW-AC-17XX* Series MS24264RXXBXX* Military Class R * To complete order number, see how to order, page 7. Cable Support Thread M Shell Size 08** Steel NS-2A Alum. UNEF-2A Modified Aluminum Connector Weight (lbs.) max including Contacts Pin Insert Socket Insert Flange Width S .005 Mounting Hole Centers T .005 Back Mount Min. Hole Y Front Mount Min. Hole Z NA .437-28 .025 .026 .812 .594 .606 .443 10 .563-36 .562-24 .042 .044 .937 .719 .748 .572 12 .733-36 .750-20 .061 .062 1.031 .812 .913 .760 14 .803-36 .812-20 .072 .074 1.125 .906 .980 .822 16 .930-36 .937-20 .087 .090 1.250 .969 1.107 .948 18 1.036-36 1.062-18 .110 .112 1.343 1.062 1.209 1.072 20 1.161-36 1.187-18 .130 .134 1.437 1.156 1.325 1.197 22 1.286-36 1.312-18 .152 .159 1.562 1.250 1.452 1.322 24** NA 1.437-18 .181 .188 1.703 1.375 1.577 1.447 28 NA NA NA NA NA NA NA NA NA designates not available. ** Not available in Stainless Steel. All dimensions for reference only. 12 D-Hole Mounted Receptacle aluminum/stainless steel bayonet coupling STAINLESS STEEL Pyle ZZW-RC-15XX* Series MS24265EXXBXX* Military Class E ALUMINUM Pyle ZZW-AC-15XX* Series MS24265RXXBXX* Military Class R * To complete order number, see how to order, page 7. Cable Support Thread M Aluminum Connector Weight (lbs.) max including Contacts Lock Nut Flats T Socket Insert Flange Width S .005 Steel Shell Size Steel NS-2A 08** NA .437-28 .029 .030 .979 NA .812 .635 .605 33 .563-36 .562-24 .049 .050 1.104 .937 .937 .760 .730 36 56 10 12** Pin Insert Alum. Mounting Hole Dia. Y Mounting Hole Flat Z Recom. min. Torque Jam Nut Lb. - inches Alum. UNEF-2A Modified NA .750-20 .069 .070 1.291 1.125 1.125 .947 .917 14 .803-36 .812-20 .087 .089 1.391 1.062 1.187 1.010 .980 65 16 .930-36 .937-20 .104 .106 1.561 1.187 1.312 1.135 1.105 69 18 1.036-36 1.062-18 .131 .133 1.641 1.312 1.437 1.260 1.225 81 20 1.161-36 1.187-18 .152 .157 1.766 1.562 NA 1.385 1.350 100 22 1.286-36 1.312-18 .181 .187 1.954 1.585 1.687 1.510 1.475 123 24 1.411-36 1.437-18 .208 .212 2.079 1.687 1.812 1.635 1.600 133 28 NA NA NA NA NA NA NA NA NA NA NA designates not available. ** Not available in Stainless Steel. All dimensions for reference only. 13 Straight Plug aluminum/stainless steel bayonet coupling STAINLESS STEEL Pyle ZZW-RC-10XX* Series MS24266EXXBXX* Military Class E ALUMINUM Pyle ZZW-AC-10XX* Series MS24266RXXBXX* Military Class R * To complete order number, see how to order, page 7. Cable Support Thread M Aluminum Connector Weight (lbs.) max including Contacts Coupling Nut Dia S Max. Shell Dia. T +.000 -.005 Shell Size Steel NS-2A Alum. UNEF-2A Modified 08** NA .437-28 .030 .031 NA .762 .424 10 .563-36 .562-24 .044 .045 .848 .904 .526 12 .733-36 .750-20 .063 .064 1.018 1.076 .696 14 .803-36 .812-20 .074 .076 1.087 1.122 .765 16 .930-36 .937-20 .091 .094 1.214 1.264 .892 18 1.036-36 1.062-18 .110 .112 1.320 1.373 .998 20 1.161-36 1.187-18 .133 .136 1.445 1.503 1.123 22 1.286-36 1.312-18 .154 .160 1.570 1.623 1.248 24 1.411-36 1.437-18 .184 .188 1.695 1.752 1.373 28 NA NA NA NA NA NA NA Pin Insert Socket Insert Steel NA designates not available. ** Not available in Stainless Steel. All dimensions for reference only. 14 Alum. Non-Decoupling, Ratchet Lock Plug stainless steel ratchet lock coupling STAINLESS STEEL Pyle ZZY-RC-12XX* Series Military Class E * To complete order number, see how to order, page 7. Shell Size 08 Cable Support Thread M Coupling Thread R NA NA Coupling Nut Dia S Shell Dia. T NA NA 10 .563-36 .687-24 .931 .526 12 .733-36 .875-20 1.111 .696 14 .803-36 .937-20 1.175 .765 16 .930-36 .812-20 1.302 .892 18 1.036-36 .937-20 1.408 .998 20 NA NA NA NA 22 1.286-36 1.437-18 1.658 1.248 24 1.411-36 1.562-18 1.783 1.373 28 1.661-36 1.812-16 2.038 1.623 NA designates not available. All dimensions for reference only. 15 Ratchet Lock Plug and Mating Flange Receptacle aluminum/stainless steel ratchet lock coupling RATCHET LOCK PLUG Stainless Steel/Aluminum Pyle ZZY-RC/AC-12XX* Series MATING FLANGE MOUNTED, THREADED RECEPTACLE Stainless Steel/Aluminum Pyle ZZY-RC/AC-17XX* Series * To complete order number, see how to order, page 8. Plug Shell Size Cable Support Thread M Coupling Nut Dia. S Max. Receptacle Shell Dia. T +.000 -.005 Coupling Thread R Flange Width S .005 Mounting Hole Centers T .005 Back Mount Hole (min.) Y Front Mount Hole (min.) Z 08 NA NA NA NA NA NA NA NA 10 .6250-24 .945 .526 .6875-24 .937 .719 .706 .635 12 .7500-20 1.165 .696 .8750-20 1.031 .812 .885 .760 14 .8750-20 1.230 .765 .9375-20 1.125 .906 .947 .885 16 1.0000-20 1.353 .892 1.0625-18 1.250 .969 1.072 1.010 18 1.0625-18 1.468 .998 1.1875-18 1.343 1.062 1.197 1.072 20 1.1875-18 1.607 1.123 1.3125-18 1.437 1.156 1.322 1.197 22 1.3125-18 1.733 1.248 1.4375-18 1.562 1.250 1.447 1.322 24 1.4375-18 1.858 1.373 1.5625-18 1.703 1.375 1.572 1.448 28 1.7500-18 2.113 1.623 1.8120-16 2.000 1.562 1.822 1.760 NA designates not available. All dimensions for reference only. 16 MIL-C-26500 - 48 Series receptacle short skirt Receptacle Short Skirt - Aluminum - Bayonet Coupling Shorter, lighter, and more economical than the standard MIL-C-26500 connector receptacles, the 48 Series receptacle short skirt comes in two versions: with standard flange and with reduced flange. Both versions are 1.100" long which is .275" shorter than the length of the standard MIL-C-26500 connector. They have molded epoxy fiberglass inserts and can operate continuously up to 125C (257F), but otherwise they offer the same environmental sealing, from the panel out, as standard MIL-C-26500 connectors. They have bayonet coupling and mate with standard MIL-C-26500 plugs. The hard dielectric inserts, with resilient face seal and molded-in gold plated solder cup pin contacts, are available in insert arrangements shown in the chart below. AVAILABLE WITH PIN CONTACTS ONLY Receptacle Short Skirt with Standard Flange Insert Amphenol ArrangePart Number* ment Receptacle Short Skirt with Reduced Flange A .005 B .005 C Max. D +.000 -.005 E Max. Insert Amphenol ArrangePart Number* ment A Max. B .005 C Max. D +.000 -.005 E Max. 10-5 48-7115-XX .937 .719 .696 .659 .562 10-5 48-7132-XX .870 .647 .696 .659 .562 12-3 48-7116-XX 1.031 .812 .875 .829 .750 12-3 48-7133-XX .996 .773 .875 .829 .750 12-12 48-7117-XX 1.031 .812 .875 .829 .750 12-12 48-7134-XX .996 .773 .875 .829 .750 14-4 48-7118-XX 1.125 .906 .935 .898 .812 14-7 48-7119-XX 1.125 .906 .935 .898 .812 14-15 48-7120-XX 1.125 .906 .935 .898 .812 16-24 48-7121-XX 1.250 .969 1.062 1.025 .938 18-8 48-7122-XX 1.343 1.062 1.187 1.131 1.062 18-14 48-7123-XX 1.343 1.062 1.187 1.131 1.062 18-31 48-7124-XX 1.343 1.062 1.187 1.131 1.062 20-25 48-7251-XX 1.437 1.156 1.312 1.256 1.182 20-28 48-7175-XX 1.437 1.156 1.312 1.256 1.182 22-12 48-7125-XX 1.562 1.250 1.437 1.381 1.312 22-19 48-7126-XX 1.562 1.250 1.437 1.381 1.312 22-55 48-7127-XX 1.562 1.250 1.437 1.381 1.312 * To complete part number: Replace XX with alternate keying positions (omit for normal position). See page 4. 17 MIL-C-26500 - 48 Series wire splice connector Special Application Wire Splice Connector The Amphenol(R) 48 Series wire splice connector is a low cost, spacesaving connector design that can be used for various design applications. The push-mating/twist-pull-unmating feature provides a simple solution to many design requirements without sacrificing performance. This wire splice connector utilizes a metal retention clip for a single size 16 pin and socket contact. Features and benefits include: * Push-mating/twist-pull-unmating * Uses standard M39029/31-229 pin and M39029/32-248 socket contacts * Incorporates environmental sealing grommet * Metal collet retention * Uses standard MIL-C-26500 contact removable tools * Low cost * Weight savings design * Space savings design * Color coded connector halves - red or blue Receptacle Wire Splice RECEPTACLE Amphenol 48 Series Part Number Amphenol 10- Part Number Color 48-7191 10-804342 Blue 48-7191-1 10-804342-1 Red Size 16 Contact Part Number Pin ZZL-4016-36LD Socket ZZL-4116-36LD Plug Wire Splice PLUG Amphenol 48 Series Part Number 18 Amphenol 10- Part Number Color 48-7190 10-804341 Blue 48-7190-1 10-804341-1 Red Size 16 Contact Part Number Pin ZZL-4016-36LD Socket ZZL-4116-36LD MIL-C-26500 - Firewall Class K Class K stainless steel threaded coupling THREADED COUPLING, FIREWALL PYLE FPK, FPL, FP5K MS2761X-KXXTXX Shell Style (Firewall stainless steel only) Basic Performance Level Hardware Description* Square Flange Mounted Receptacle Threaded Coupling High performance. Environmentally sealed. Resists high temperatures up to 238C (460F). Class K Firewall Stainless Steel Single Hole (D-Hole) Mounted Receptacle Threaded Coupling High performance. Environmentally sealed. Resists high temperatures up to 238C (460F). Class K Firewall Stainless Steel Straight Plug Threaded Coupling High performance. Environmentally sealed. Resists high temperatures up to 238C (460F). Class K Firewall Stainless Steel High performance. Environmentally sealed. Resists high temperatures up to 238C (460F). Class K Firewall Stainless Steel Ratchet Locking Plug Threaded Coupling * See how to order, page 21, for further description of hardware classes. ** See how to order, page 21, to complete part numbers. 19 Class* Basic Part Number** Military Class K MS27613-KXXTXX Pyle FPK or FPL or FP5K Series FPK-17( ) or FPL-17( ) or FP5K-17( ) Military Class K MS27614-KXXTXX Pyle FPK or FPL or FP5K Series FPK-19( ) or FPL-19( ) or FP5K-19( ) Military Class K MS27615-KXXTXX Pyle FPK or FPL FPK-11( FPL-11( Military Class K MS27615KXXSXX Pyle FPK or FPL or FP5K Series FPK-12( ) or FPL-12( ) or FP5K-12( ) ) or ) MIL-C-26500 - Firewall Class K Class K stainless steel bayonet coupling BAYONET COUPLING, FIREWALL PYLE FYL MS2761X-KXXBXX Shell Style (Firewall stainless steel only) Basic Performance Level Hardware Description* Square Flange Mounted Receptacle Bayonet Coupling High performance. Environmentally sealed. Resists high temperatures up to 238C (460F). Class K Firewall Stainless Steel Single Hole (D-Hole) Mounted Receptacle Bayonet Coupling High performance. Environmentally sealed. Resists high temperatures up to 238C (460F). Class K Firewall Stainless Steel Straight Plug Bayonet Coupling High performance. Environmentally sealed. Resists high temperatures up to 238C (460F). Class K Firewall Stainless Steel * See how to order, page 21, for further description of hardware classes. ** See how to order, page 21, to complete part numbers. 20 Class* Basic Part Number** Military Class K MS27613-KXXBXX Pyle FYL Series FYL-17 ( Military Class K MS27614-KXXBXX Pyle FYL Series FYL-19 ( Military Class K MS27615-KXXBXX Pyle FYL Series FYL-11 ( ) ) ) MIL-C-26500 - Firewall, Class K how to order Class K stainless steel, threaded/bayonet/ratchet lock coupling Military Designation Sample ordering number: MS27613 K 14 T 7 P 6 - D Shell Type MS27613 - Square Flange Receptacle MS27614 - Single Hole Mounting Receptacle MS27615 - Straight Plug Cable Support Long (MS27658) - D Short (MS27657) - P Right Angle (MS27659) - J (omit for no support) Class K - Firewall - Stainless steel, passivated Alternate Keying 6, 7, 8, 9, Y (omit for normal) See page 4 Shell Size 12, 14, 16, 18, 22, 24, 28 Contact Type Pin - P Socket - S Coupling Type B - Bayonet S - Ratchet Locking Thread T - Standard Threaded Insert Arrangement See chart, page 4 Amphenol(R)/Pyle-National(R) Designation Sample ordering number: FPK - 11 28 - 42 S T 06 - D - WXX Connector Type FPK - Threaded Coupling, qualified to MIL-C-26500 and BACC63 Series FPL - Threaded Coupling, same as FPK, but used on Lockheed Aircraft FP5K - Threaded Coupling, qualified for General Electric FYL - Bayonet Coupling, qualified to MIL-C-26500 Variations Insert - W Hardware - Y Standard for Plug Bayonet Hardware - Y19 Cable Support Long - D Short - P Right Angle - J (omit for no support) Shell Type 11 - Straight Plug 12 - Ratchet Locking Threaded Plug 13 - Improved Non-Decoupling Plug 17 - Square Flange Receptacle 19 - D-Hole Mounting Receptacle Alternate Keying 06, 07, 08, 09, Y (omit for normal) See page 4 Contact Style No Contacts - E Rhodium - T Gold Contacts - D Shell Size 12, 14, 16, 18, 22, 24, 28 Contact Type Pin - P Socket -S Insert Arrangement See chart, page 4 Boeing Company Designation Sample ordering number: BAC C 63X 14 - 07 P Boeing Aircraft Company 6 Alternate Keying 6, 7, 8, 9, Y, (omit for normal) See page 4 Electrical Connector Contact Type Pin - P Socket - S Shell Type 63X - Plug, Threaded, Fire Barrier 63Y - Receptacle, Threaded Fire Barrier 63AE - Plug, Threaded, for use with No. 20 Wire Fire Barrier 63AF - Receptacle, Flange Mount, Threaded, Fire Barrier, For use with No. 20 Wire Fire Barrier. Note: AE & AF require W11 variation on Pyle Number. Insert Arrangement See chart, page 4 Accessories To order with D Cable Clamp, replace - with Letter C Shell Size 12, 14, 16, 18, 22, 24, 28 21 Firewall Class K Flange Mounted Receptacle Class K stainless steel, threaded/bayonet coupling THREADED COUPLING Class K Stainless Steel Pyle FPK-17XX* Series MS27613KXXTXX* Military Class K BAYONET COUPLING Class K Stainless Steel Pyle FYL-17XX* Series MS27613KXXBXX* Military Class K * To complete order number, see how to order, page 21. Shell Size Cable Support Thread M Coupling Thread R Flange Width S .005 Mounting Hole Centers T .005 Back Mount Min. Hole Y Front Mount Min. Hole Z 08 NA NA NA NA NA NA 10 NA NA NA NA NA NA 1.031 .812 .913 .760 12** .733-36 .875-20 14 .803-36 .937-20 1.125 .906 .980 .822 16 .930-36 1.062-18 1.250 .969 1.107 .948 18 1.036-36 1.187-18 1.343 1.062 1.209 1.072 20 NA NA NA NA 22 1.286-36 1.437-18 1.562 24** 1.411-36 1.562-18 28** 1.661-36 1.812-16 NA NA 1.250 1.452 1.322 1.703 1.375 1.577 1.422 2.000 1.562 1.827 1.700 NA designates not available. ** Available in Threaded Coupling only. All dimensions for reference only. 22 Firewall Class K D-Hole Mounted Receptacle Class K stainless steel, threaded/bayonet coupling THREADED COUPLING Class K Stainless Steel Pyle FPK-19XX* Series MS27614KXXTXX* Military Class K BAYONET COUPLING Class K Stainless Steel Pyle FYL-19XX* Series MS27614KXXBXX* Military Class K * To complete order number, see how to order, page 21. Shell Size Cable Support Thread M Coupling Thread R Flange Width S Lock Nut Flats T Mounting Hole Dia. Y Mounting Hole Flat Z Recom. min. Torque Jam Nut 08 NA NA NA NA NA NA 33 10 NA NA NA NA NA NA 36 12** .733-36 .875-20 1.291 1.215 .947 .917 56 14 .803-36 .937-20 1.391 1.062 1.010 .980 65 16 .930-36 1.062-18 1.516 1.187 1.135 1.105 69 18 1.036-36 1.187-18 1.614 1.312 1.260 1.225 81 20 NA NA 1.286-36 1.437-18 24 NA NA NA NA 28 NA NA NA NA 22** NA NA NA 1.954 1.562 1.510 NA designates not available. ** Available in Threaded Coupling only. All dimensions for reference only. 23 NA 100 1.475 123 NA NA 133 NA NA NA Firewall Class K Straight Plug Class K stainless steel, threaded/bayonet coupling THREADED COUPLING Class K Stainless Steel Pyle FPK-11XX* Series MS27615KXXTXX* Military Class K BAYONET COUPLING Class K Stainless Steel Pyle FYL-11XX* Series MS27615KXXBXX* Military Class K * To complete order number, see how to order, page 21. Shell Size Cable Support Thread M Coupling Thread R Coupling Nut Dia. S1 Dia. S2 Shell Dia. T 08 NA NA NA NA NA 10 NA NA NA NA 12 .733-36 .875-20 .984 1.018 .696 .765 NA 14 .803-36 .937-20 1.054 1.087 16 .930-36 1.062-18 1.181 1.214 .892 18 1.036-36 1.187-18 1.287 1.320 .998 20 NA NA NA NA 22 1.286-36 1.437-18 1.537 1.570 1.248 24 1.411-36 1.562-18 1.662 1.695 1.373 28** 1.661-36 1.812-16 1.912 NA 1.623 NA designates not available. ** Available in Threaded Coupling only. All dimensions for reference only. 24 NA Firewall Class K Ratchet Lock Plug, Class K stainless steel, threaded coupling RATCHET LOCK PLUG Threaded Coupling Class K Stainless Steel Pyle FPK-12XX* Series MS27615KXXSXX Military Class K * To complete order number, see how to order, page 21. Shell Size Cable Support Thread M Coupling Thread R NA Coupling Nut Dia S Shell Dia. T 08 NA NA NA 10 .563-36 .687-24 .931 .526 12 .733-36 .875-20 1.111 .696 14 .803-36 .937-20 1.175 .765 16 .930-36 1.062-18 1.302 .892 18 1.036-36 1.187-18 1.408 .998 20 NA NA NA NA 22 1.286-36 1.437-18 1.658 1.248 24 1.411-36 1.562-18 1.783 1.373 28 1.661-36 1.812-16 2.038 1.623 NA designates not available. All dimensions for reference only. 25 Hermetic MIL-C-26500 Connectors hermetically sealed Amphenol(R)/Pyle(R) is an experienced supplier of highly reliable hermetic connectors for the aircraft industry. Amphenol's ZZL and ZZB series of hermetic receptacles are designed to the requirements of MIL-C-26500, and are available in tin-plated cold-rolled steel shells and gold-plated nickel-iron alloy contacts. Other material variations, including stainless steel, are available. Hermetic receptacles are available in shell sizes 8, 10, 12, 14, 16, 18, 22, 24 and 28. The hermetic series is offered in a variety of receptacle shell styles, which include solder mount, square flange and "D" hole mount. These connectors can be ordered with either eyelet, solderwell or printed circuit tail pin contacts. Consult Amphenol, Sidney, NY for more information on hermetic connectors, and for optional connector designs. Amphenol(R)/Pyle(R) How to Order Designation for Hermetic Connectors Sample ordering number: ZZL - HC - 14 12 - 03 P 06 W - H45 Special Modifications H45 - 304L stainless steel shell H52 - Tinned termination tails H56 - Same as standard; gold contacts H77 - 304L stainless steel shell, Inconel contacts H127 - Same as H125 except 304L stainless steel shell H146 - 303 stainless steel shell, 100 microinch gold H152 - 304L stainless steel shell with individual beads, loose seals H177 - 303 stainless steel shell, loose seals H181 - Tin plated contacts Series Designation ZZL - Threaded Coupling ZZB - Bayonet Coupling Class HC - Denotes Hermetic Class Shell Style 14 - Solder Mount Receptacle 15 - Single Hole Mounting Receptacle 17 - Square Flange Receptacle Shell Size 8, 10, 12, 14, 16, 18, 22, 24, 28 Insert Arrangement See inserts labeled with an "H" on page 4. Contact Style E - designates eyelet W - designates solderwell Consult Amphenol, Sidney, NY for ordering information of printed circuit tail contacts. Contact Type P denotes male pin contacts with standard gold plate Alternate Key Position 06, 07, 08, 09, 10 (omit for normal) (See page 4) 26 Contacts and Accessories for MIL-C-26500 cylindrical connectors Crimp Contacts per MIL-C-39029 - Copper Alloy, Gold Plating PIN CONTACTS SOCKET CONTACTS Contact Size Spec. Number Bin Code MS Number Amphenol/Pyle No. Contact Size Spec. Number Bin Code MS Number Amphenol/Pyle No. 20 M39029/31 241 MS24254-20P ZZL-4020-36LD* 20 M39029/32 260 MS24255-20S ZZL-4120-36LD* 16 M39029/31 229 MS24254-16P ZZL-4016-36LD* 16 M39029/32 248 MS24255-16S ZZL-4116-36LD* 12 M39029/31 235 MS24254-12P ZZL-4012-36LD* 12 M39029/32 254 MS24255-12S ZZL-4112-36LD* * Add - H139 for Boeing Marking for Pin/Socket, Standard Plating. Add - H148 for Boeing Marking for Pin/Socket, Select Plate. Amphenol(R)/Pyle(R) Special Application Contacts Thermocouple Contacts Copper Alloy, Rhodium plated Contacts Contact Size Description 20 Copper Alloy/ Rhodium plated 16 12 Amphenol/Pyle Pin No. Amphenol/Pyle Socket No. ZZL-4020-36LT ZZL-4120-36LT Copper Alloy/ Rhodium plated ZZL-4016-36LT Copper Alloy/ Rhodium plated ZZL-4012-36LT Amphenol/Pyle Socket No. Contact Size Material Amphenol/Pyle Pin No. Pencil Clip Design* Split Tine Design** Color Code 20 Alumel Chromel Constantan ZZL-4020-10R ZZL-4020-10P ZZL-4020-10N ZZL-4120-10R ZZL-4120-10P ZZL-4120-10N ZZY-4120-10R ZZY-4120-10P ZZY-4120-10N Green White Yellow 16 Alumel Chromel Constantan ZZL-4016-10R ZZL-4016-10P ZZL-4016-10N ZZL-4116-10R ZZL-4116-10P ZZL-4116-10N ZZY-4116-10R ZZY-4116-10P ZZY-4116-10N Green White Yellow 12 Alumel Chromel Constantan ZZL-4012-10R ZZL-4012-10P ZZL-4012-10N ZZL-4112-10R ZZL-4112-10P ZZL-4112-10N ZZY-4112-10P ZZY-4112-10P ZZY-4112-10N Green White Yellow ZZL-4116-36LT ZZL-4112-36LT Contacts qualified to Boeing BACC47CN/CP. * Pencil clip socket design - see page 2 for description. ** Split tine socket with napkin ring design - see page 2 for description. Printed Circuit Board/Wire-Wrap Contacts Sealing Gaskets A variety of different designs are available; please consult Amphenol, Sidney, NY for more information. For use with square flange mounted receptacles. Provide waterproofing and pressure sealing features. Reel Contacts 2000 contacts per reel (gold or rhodium plated) are available. Consult Amphenol, Sidney, NY for more information. Sealing Plugs For sealing spare contact holes. Same sealing plug is used in both plug and receptacle. Contact Size Amphenol/Pyle No. MS Number Color Code 20 10-405996-20 MS-27488-20 Red 16 10-405996-16 MS-27488-16 Blue 12 & #1 Shielded 10-405996-12 MS-27488-12 Yellow # 2 Shielded 10-405996-8 MS27187-4 White Contact Size Amphenol/ Pyle No. 08 ZZL-6508-10D 10 ZZL-6510-10D 12 ZZL-6512-10D 14 ZZL-6514-10D 16 ZZL-6516-10D 18 ZZL-6518-10D 20 ZZL-6520-10D 22 ZZL-6522-10D 24 NA Cable Supports - Aluminum 27 Shielded/Coaxial Contacts for MIL-C-26500 cylindrical connectors Drawing (See below and on next page) Type 1 #1 Shielded Type 2 #1 Shielded Type 3 #1 Shielded Type 4 Shielded Contact Part No./ Contact Type Cable Stripping Dim.*** +.0156 -.0000 A B 48-1226-02 Pin 48-1227-02 Socket 48-1227-50 Socket .2189 .0781 48-1226-57 Pin 48-1227-57 Socket .2189 48-1226-51, -54 Pin 48-1227-51, -54, -56 Socket 48-1226-55 Pin 48-1227-55 Socket C Type 5 Tool Nest Bushing Crimp Setting #3 Outer Ferrule Crimping Tool 294-529 Cable Application #22 AWG per MIL-C-7078 Type II and MIL-C-27500-22 KING RG-174/U, -188/U .1094 294-268* 294-289** 294-1631 #1 294-529 RG-161/U, -179/U, -179A/U, -187/U .0781 .1094 294-268* 294-289** 294-1631 #1 294-528 Raychem 9530A11 .2189 .0313 .1563 294-268* 294-289** 294-1631 #1 294-528 RG-180/U, -180A/U, -180B/U, -195/U .2344 .0313 .1563 294-268* 294-289** 294-1631 #1 294-529 RG-178/U, -178A/U, -178B/U, -196-U 294-1014 Turret Head 294-1014 294-1015 299-1630 .030 .040 294-528 #18, 20, 22 AWG per MIL-C-7078, Type II and MIL-C-27500-18, -20, -22 KING Extruded Jacket 48-2187-02 Pin 48-2188-02 Socket .2189 .1094 .1406 294-126** 294-243** 294-1166** 294-358** 294-268* 48-2187-50, -51 Pin 48-2188-50, -51, -53, -54 Socket .2189 .1094 .1406 294-1166** 294-358** 294-268* 294-1014 294-1015 294-1630 .030 .040 #3 294-528 RG-180/U, -180A/U, -180B/U, -195/U 48-2187-52 Pin 48-2188-52 Socket .3125 .1094 .1406 294-358** 294-268* 294-1015 294-1630 .037 .041 294-530 RG-59/U and 21-541 #2 Shielded #2 Shielded Amphenol Crimp Tools (Center Contact) * Conforms to MIL-C-22520/2 specification. ** MS3191 tools are inactive for new procurement, but can be used if available. *** Refer to illustration on page 29. Same as 294-126, less positioners. Including Hex Die Set Shielded Contact Assembly Procedure Step 1 Slide sealing boot or sleeve and outer ferrule onto cable and strip cable as shown at right. After stripping, slide spacer over center conductor as shown for Type 2 and Type 3. For Type 3 slide spacer under wire braid. Step 2 Insert stripped center conductor into contact until wire shows through inspection hole and dielectric (Type 1, Type 4 and Type 5) or spacer (Type 2 and Type 3) butts against contact. Fully seat contact in nest bushing of crimp tool and crimp in one full stroke. (Follow same crimping procedures except use nest bushing crimping tool from table above). Step 3 Slightly flair out ends of wire braid to facilitate insertion of inner ferrule of body assembly. Do not comb braid. Step 4 Install center contact in body assembly and slide inner ferrule underneath wire braid as shown. Push center contact until it is locked in place in the body assembly. Pull lightly on cable to make sure that contact is securely locked in place. Step 5 Slide outer ferrule over braid and up against body as shown. There should be no slack in the wire braid. Crimp the outer ferrule with proper tool from table above. Then for Type 1, Type 3 and Type 5 slide sealing sleeve toward contact until sleeve touches outer ferrule. Step 6 Insert the assembled shielded contact into the connector in the same way as the standard contact using applicable insertion tool (see page 28). This completes assembly for Type 1, Type 2, Type 3 and Type 5. Step 7 To complete assembly for Type 4, push sealing boot into connector grommet until O-ring riser of boot snaps into place and seals the assembly. 28 Type 1 Shielded/Coaxial Contacts, cont. for MIL-C-26500 cylindrical connectors Cable Stripping Strip cable jacket, braid and dielectric to the dimensions shown in the table on page 28. Make all cuts square and sharp, being careful not to nick braid, dielectric, or center conductor when cutting. If conductor ends fray, twist them to their normal lay. (Refer to stripping dimensions in chart on page 28) Shielded Contacts after Crimping Shielded Contact Assembly Procedure, cont. Type 2 Type 3 Type 4 29 Type 5 Accessories - contact terminating tools for MIL-C-26500 cylindrical connectors Contact Crimping Tools Crimping Tool with Indenters Contact Size Amphenol/ Mil. No. Pyle No. Adjustable Turret Amphenol/ Pyle No. Mil. No. Checking Gage for Crimping Tool Amphenol/ Pyle No. Mil. No. 20 16 TP-201354 M22520/1-01 (Class 1) TP-201355 M22520/1-02 TP-201356 (Class 1) M22520/3 12 Contact Insertion Tools Contact Size 20 Insertion Tool Replacement Tip & Pin Insertion Tool Amphenol/ Pyle No. Mil. No. Color Code Amphenol/ Pyle No. Mil. No. ZZL-R-9510-A-20 MIL-I-81969/17-9 Red ZZL-R-9531-A-20 - 16 ZZL-R-9510-16 MIL-I-81969/17-4 Blue ZZL-R-9531-16 - 12 ZZL-R-9510-12 MIL-I-81969/17-5 Yellow ZZL-R-9531-12 - Contact Removal Tools Contact Size Amphenol/ Pyle No. 20 20 to 24 .170" - .201" 16 to 18 .207" - .238" 12 12 to 14 .207" - .238" Red Amphenol/ Pyle No. 16 ZZL-R-9511-16 MS-24256-R-16 Blue ZZL-R-9557-16 - 12 ZZL-R-9511-12 MS-24256-R-12 Yellow ZZL-R-9557-12 - See pages 32 and 33 for assembly instructions for proper contact termination and contact insertion/removal. 30 ZZL-R-9557-20 Mil. No. MS-24256-R-20 Stripping Length 16 Color Code ZZL-R-9511-20 Use table below to determine correct wire stripping length for your wire sizes. When stripping the wire, avoid nicking wires or damaging insulation, as it is a functional part of the sealing system. Wire Size Mil. No. 20 Contact Termination Contact Size Removal Tool Replacement Tip Removal Tool - Accessories - contact terminating tools for 48 Series MIL-C-26500 connectors Crimping Tools for Shielded Contacts For Crimping Center Contact Shielded Contact Size Amphenol Tool 357-100 Basic Crimp Tool # 1 Shielded 357-100 # 2 Shielded For Crimping Outer Ferrule Contact Positioner Basic Crimp Tool (Hex dies included) Hex Dimension 294-1631 294-529 .128 Hex 294-1630 294-528 .160 Hex Amphenol Tool 294-529 or 294-528 Standard Crimping Tool for Power Contacts Basic Crimp Tool Amphenol Part No. Military Part No. Use with Turret Head 294-542 M22520/1-01 M22520/1-02 Contact Size Color Code 20 Red 20-22-24 16 Blue 16-18-20 12 Yellow 12-14 Contact Insertion Tools Contact Size Wire Size Contact Removal Tools Amphenol Part No. Military Part No. Contact Size Amphenol Part No. Military Part No. MS2456R20 20 294-88 MS2456A20 20 294-89 16 294-96 MS2456A16 16 294-97 MS2456R16 #12, # 1 Shielded 294-72 MS2456A12 #12, # 1 Shielded 294-73 MS2456R12 #2 Shielded 294-128 - #2 Shielded 294-127 - For more information on other tools available consult Amphenol, Sidney, NY. NOTE: Amphenol and Pyle tools are interchangeable. 31 Assembly Instructions for MIL-C-26500 Connectors Contact Termination Contacts should be crimped to the wire with MS Standard hand crimping tools or specification automatic crimping machines. When stripping the wire avoid nicking wires or damaging the insulation as it is a functional part of the sealing system. Contact Size Wire Size Stripping Length 20 20 to 24 .170" - .201" 16 16 to 18 .207" - .238" 12 12 to 14 .207" - .238" Follow steps 1 - 4, as shown below, for proper contact crimping: 1. Insert stripped wire into contact pocket until it is visible through inspection hole. 2. Carefully seat contact in crimp tool positioner. 3. Crimp in one full stroke. (The ratchet will not release jaws until tool has completed stroke). 4. Inspect crimp for wire visibility through inspection hole. 32 Assembly Instructions for MIL-C-26500 Connectors, cont. Contact Insertion into the Connector The following steps are recommended for assembly. NOTE: The Pyle Miniature Connector is designed with a unique sealing principle. Assembly of contacts into the connector must be made with reasonable care to avoid damage to the silicone rubber insert. 1. Lubricate wire cavities in back face of insert with a very thin film of DC-200 Silicone Oil or equal before inserting contacts. 2. Locate contact in insertion tool (as shown in illustration). 3. Align contact with hole in rear face of insert. The alignment of insertion tool with contact must be coaxial with the axis of the connector. When contact has entered rear seal portion of insert, maintain alignment of contact and tool parallel to, and in line with hole. Insert contact to full depth. Seating of the contact in the retention collet is audible. The contact insertion force is less than five pounds. 4. Extract insertion tool, keeping it aligned with hole. Contact Removal from the Connector A contact is removed from the connector insert with the extraction tool as follows: 1. Set the spacer sleeve in the proper position for removal of male or female contact. 2. Place tool over the contact and insert into front face of cavity. The alignment of removal tool with contact must be coaxial with axis of connector. 3. Exert a nominal force axially (from 5 to 10 lbs.) to release retention collet. Spacer sleeve will shoulder at front face of insulation when tool is inserted to proper depth. 4. Push extraction plunger to force the contact out of the rear of the insert. 5. Grasp contact or wire at rear face of insert and complete the extraction. 6. Remove extraction tool axially. 7. After using extraction tool the spacer sleeve should be set forward in last notch to protect the end of the plunger guide. Panel Mounting Two receptacle shell styles, flange mount and D-hole mount, are available for panel mounting. See the applicable drawings for mounting hole dimensions. The square flange receptacle, sizes 10 through 22, is fastened to the panel with four size #4-40 machine screws. The 24 and 28 size shells are fastened with #6-32 machine screws. 33 Accessories - cable supports for MIL-C-26500 cylindrical connectors Cable Supports - Aluminum Cable clamps support cable or wire at the plug or receptacle and prevent twisting and pulling. Shell Size Non-Conductive, Black Anodize Finish Conductive, Chromium Finish Amphenol/ Pyle No. A Max. Dia. B .015 X I.D. .38 Thread UNEF-2B P Max. 08 MS27291-13 ZZL-R-5308-A MS27291-701 ZZL-M-5308 .582 .935 .180 .4375-28 .785 10 MS27291-1 ZZL-R-5310-A MS27291-101 ZZL-M-5310 .731 .935 .270 .5625-24 .914 12 MS27291-2 ZZL-R-5312-A MS27291-201 ZZL-M-5312 .919 .935 .400 .7500-20 1.026 14 MS27291-3 ZZL-R-5314-A MS27291-301 ZZL-M-5314 .981 1.170 .460 .8125-20 1.090 16 MS27291-4 ZZL-R-5316-A MS27291-401 ZZL-M-5316 1.106 1.170 .610 .9375-20 1.250 18 MS27291-5 ZZL-R-5318-A MS27291-501 ZZL-M-5318 1.231 1.170 .690 1.0625-18 1.358 20 MS27291-14 ZZL-R-5320-A MS27291-801 ZZL-M-5320 1.356 1.170 .830 1.1875-18 1.496 22 MS27291-6 ZZL-R-5322-A MS27291-601 ZZL-M-5322 1.481 1.170 .940 1.3125-18 1.604 24 MS27291-15 ZZL-R-5324-A MS27291-901 ZZL-M-5324 1.606 1.170 1.040 1.4375-18 1.740 Amphenol/ Pyle No. MS. No. MS No. Cable Supports - Stainless Steel, Straight L Standard Straight Support (L = .781) Shell Size A Long Straight Support MS No. Amphenol/ Pyle No. A MS No. Amphenol/ Pyle No. A 10 NA NA NA NA NA NA NA 12 NA NA NA NA NA NA MS27658-12 A L Thread FPL-R-5310L NA NA .563-36 FPL-R-5312L .435 1.070 .753-36 MS27657-14 ZZL-R-5314 .230 MS27657-1 FPL-R-5314 .382 MS27658-14 FPL-R-5314L .504 1.170 .803-36 16 MS27657-16 ZZL-R-5316 .292 MS27657-2 FPL-R-5316 .462 MS27658-16 FPL-R-5316L .686 1.270 .930-36 18 MS27657-18 ZZL-R-5318 .392 MS27657-3 FPL-R-5318 .556 MS27658-18 FPL-R-5318L .794 1.370 1.036-36 NA NA NA FPL-R-5320L NA FPL-R-5322 .608 MS27658-22 FPL-R-5322L 1.038 1.570 1.286-36 22 NA NA NA MS27657-22 ZZL-R-5322 NA .516 MS27657-4 NA NA 24 NA NA NA NA NA NA MS27658-24 FPL-R-5324L 1.162 1.670 1.411-36 28 NA NA NA NA NA NA MS27658-28 FPL-R-5328L 1.412 1.870 1.661-36 Cable Supports - Stainless Steel, Right Angle Cable Support, Right Angle Shell Size A Amphenol/ Pyle No. 14 20 L Similar to MS No. Similar to MS No. Amphenol/Pyle No. 10 NA FPL-R-5210 NA NA .563-36 12 MS27659-12 FPL-R-5212 .435 1.298 .753-36 14 MS27659-14 FPL-R-5214 .504 1.388 .803-36 16 MS27659-16 FPL-R-5216 .686 1.523 .930-36 18 MS27659-18 FPL-R-5218 .794 1.622 1.036-36 22 MS27659-22 FPL-R-5222 1.038 1.878 1.286-36 24 MS27659-24 FPL-R-5224 1.162 2.000 1.411-36 28 MS27659-28 FPL-R-5228 1.412 2.250 1.661-36 A 34 L Thread Accessories - cable supports, cont. for MIL-C-26500 cylindrical connectors Additional right angle conduit adapters and cable support clamps are available which provide added protection for the cable or wiring. Closed back cable support clamps have a removable cover; while open back cable support clamps have a strap to protect the wires at the right angle bend. Cable Supports - Stainless Steel, Closed Right Angle Shell Size Cable Support - Closed Right Angle MS No. Amphenol No. A Dia. Max. B Max. C Max D Max E Thread UNEF-2B 8 MS27558-1 48-2222-08100 .672 1.200 .938 .245 .4375-28 10 MS27558-2 48-2222-10100 .797 1.320 1.049 .370 .5625-24 12 MS27558-3 48-2222-12100 1.016 1.320 1.248 .370 .7500-20 14 MS27558-4 48-2222-14100 1.110 1.487 1.330 .520 .8125-20 16 MS27558-5 48-2222-16100 1.234 1.470 1.447 .520 .9375-20 18 MS27558-6 48-2222-18100 1.360 1.588 1.577 .645 1.0625-18 20 MS27558-7 48-2222-20100 1.485 1.759 1.698 .780 1.1875-18 22 MS27558-8 48-2222-22100 1.610 1.759 1.820 .780 1.3125-18 24 MS27558-9 48-2222-24100 1.735 2.027 1.945 1.065 1.4375-18 D Max E Thread UNEF-2B Cable Supports - Stainless Steel, Open Right Angle Shell Size Cable Support - Open Right Angle MS No. Amphenol No. A Dia. Max. B Max. C Max 8 MS27559-1 48-2222-08200 .672 1.173 .938 .201 .4375-28 10 MS27559-2 48-2222-10200 .797 1.293 1.049 .328 .5625-24 12 MS27559-3 48-2222-12200 1.016 1.293 1.248 .328 .7500-20 14 MS27559-4 48-2222-14200 1.110 1.460 1.330 .452 .8125-20 16 MS27559-5 48-2222-16200 1.234 1.443 1.447 .508 .9375-20 18 MS27559-6 48-2222-18200 1.360 1.561 1.577 .571 1.0625-18 20 MS27559-7 48-2222-20200 1.485 1.732 1.698 .748 1.1875-18 22 MS27559-8 48-2222-22200 1.610 1.732 1.819 .748 1.3125-18 24 MS27559-9 48-2222-24200 1.735 2.000 1.945 .996 1.4375-18 Conduit Adapter- Stainless Steel, Right Angle Shell Size Equivalent MS No. Conduit Adapter - Right Angle Amphenol No. A Dia. Max. B Max. C Max D Max E Thread UNEF-2B F Thread UNEF-2A 8 MS27557-1 48-2222-08000 .672 1.300 1.403 .245 .4375-28 .6250-24 10 MS27557-2 48-2222-10000 .797 1.420 1.514 .370 .5625-24 .7500-20 12 MS27557-3 48-2222-12000 1.016 1.420 1.713 .370 .7500-20 .7500-20 14 MS27557-4 48-2222-14000 1.110 1.575 1.795 .520 .8125-20 .8750-20 16 MS27557-5 48-2222-16000 1.234 1.558 1.912 .520 .9375-20 .8750-20 18 MS27557-6 48-2222-18000 1.360 1.675 2.042 .645 1.0625-18 1.0000-20 20 MS27557-7 48-2222-20000 1.485 1.863 2.163 .780 1.1875-18 1.1875-18 22 MS27557-8 48-2222-22000 1.610 1.863 2.285 .780 1.3125-18 1.1875-18 24 MS27557-9 48-2222-24000 1.735 2.118 2.410 1.065 1.4375-18 1.4375-18 35 Accessories - dummy receptacles for MIL-C-26500 cylindrical connectors Dummy Receptacles - Aluminum - Threaded or Bayonet Used as an anchoring place for disconnected plugs, dummy receptacles eliminate the problems involved in letting plugs swing freely. They also provide a limited air seal and prevent accumulation of foreign material on the face of the plug. Order by part numbers in chart below. Threaded Style pictured RECOMMENDED PANEL CUT-OUT Dimensional Data How to Order Size Thread Size UNEF-2A A Square .005 B .005 C Max. Dia. D Min. Dia. 10 .6875-24 .719 .937 .696 12 .8750-20 .812 1.031 14 .9375-20 .906 1.125 16 1.0625-18 .969 18 1.1875-18 20 1.3125-18 22 24 Bayonet Threaded Amphenol Part No. Equivalent MS Part No. Amphenol Part No. Equivalent MS Part No. .748 48-149-10000 MS27297-1 48-172-10000 MS27296-1 .875 .913 48-149-12000 MS27297-2 48-172-12000 MS27296-2 .935 .980 48-149-14000 MS27297-3 48-172-14000 MS27296-3 1.250 1.062 1.107 48-149-16000 MS27297-4 48-172-16008 MS27296-4 1.062 1.343 1.187 1.209 48-149-18000 MS27297-5 48-172-18000 MS27296-5 1.156 1.437 1.312 1.337 48-149-20000 MS27297-8 48-172-20000 MS27296-8 1.4375-18 1.250 1.562 1.437 1.452 48-149-22000 MS27297-6 48-172-22000 MS27296-6 1.5625-18 1.375 1.703 1.562 1.577 48-149-24000 MS27297-9 48-172-24000 MS27296-9 36 Accessories - protection caps for MIL-C-26500 cylindrical connectors Protection Caps and Chains - Threaded or Bayonet Protective metal caps provide an environmental seal for the connector face. They exclude dirt, dust, moisture and other foreign materials from the face of unmated plugs and receptacles. The caps have a woven steel strap so they can be easily attached near their point of use. For Bayonet Plug Dimensional Data Bayonet Cap Size A Max. Dia. B .250 Chain Length Plug Threaded Cap Receptacle +.000 C -.005 C1 +.005 -.000 Plug Receptacle C Thread UNEF-2A C1 Thread UNEF-2B 10 .906 3.00 .659 .662 .6875-24 .6875-24 12 1.078 3.00 .829 .832 .8750-20 .8750-20 14 1.141 5.00 .898 .901 .9375-20 .9375-20 16 1.266 5.00 1.025 1.028 1.0625-18 1.0625-18 18 1.375 5.00 1.131 1.134 1.1875-18 1.1875-18 20 1.510 5.00 1.256 1.263 1.3125-18 1.3125-18 22 1.625 5.00 1.381 1.384 1.4375-18 1.4375-18 24 1.760 5.00 1.506 1.511 1.5625-18 1.5625-18 For Threaded Receptacle BAYONET Plug Cap THREADED Receptacle Cap Plug Cap How to Order Bayonet Cap & Chain Plug Receptacle Cap How to Order Threaded Cap & Chain Receptacle Plug Receptacle Size Amphenol Part No. Equivalent MS Part No. Amphenol Part No. Equivalent MS Part No. Size Amphenol Part No. Equivalent MS Part No. Amphenol Part No. Equivalent MS Part No. 10 48-2144 MS27293-1 48-2150 MS27295-1 10 48-2340-10 MS27292-1 48-2301-10 MS27294-1 12 48-2143 MS27293-2 48-2149 MS27295-2 12 48-2340-12 MS27292-2 48-2301-12 MS27294-2 14 48-2142 MS27293-3 48-2148 MS27295-3 14 48-2340-14 MS27292-3 48-2301-14 MS27294-3 16 48-2141 MS27293-4 48-2147 MS27295-4 16 48-2340-16 MS27292-4 48-2301-16 MS27294-4 18 48-2140 MS27293-5 48-2146 MS27295-5 18 48-2340-18 MS27292-5 48-2301-18 MS27294-5 20 48-2773 MS27293-8 48-2774 MS27295-8 20 48-2340-20 MS27292-8 48-2301-20 MS27294-8 22 48-2139 MS27293-6 48-2145 MS27295-6 22 48-2340-22 MS27292-6 48-2301-22 MS27294-6 24 48-2767 MS27293-9 48-2768 MS27295-9 24 48-2340-24 MS27292-9 48-2301-24 MS27294-9 37