To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
August 2008
Single-Channel: 6N135, 6N136, HCPL2503, HCPL4502
Dual-Channel: HCPL2530, HCPL2531
High Speed Transistor Optocouplers
Features
■
High speed –1 MBit/s
■
Superior CMR – 10kV/µs
■
Dual-Channel HCPL2530/HCPL2531
■
Double working voltage – 480V RMS
■
CTR guaranteed 0–70°C
■
U.L. recognized (File # E90700)
Applications
■
Line receivers
■
Pulse transformer replacement
■
Output interface to CMOS-LSTTL-TTL
■
Wide bandwidth analog coupling
Description
The HCPL4502, HCPL2503, 6N135, 6N136, HCPL2530
and HCPL2531 optocouplers consist of an AlGaAs
LED optically coupled to a high speed photodetector
transistor.
A separate connection for the bias of the photodiode
improves the speed by several orders of magnitude over
conventional phototransistor optocouplers by reducing
the base-collector capacitance of the input transistor.
An internal noise shield provides superior common
mode rejection of 10kV/µs. An improved package allows
superior insulation permitting a 480V working voltage
compared to industry standard of 220V.
Schematics Package Outlines
8
1
8
1
8
1
1
2
3
4 5
6
7
8
+
_
VF1
VCC
V01
V02
GND
VF2
_
+
HCPL2530/HCPL2531
1
2
3
4 5
6
7
8
+
_
VF
VCC
VB
VO
GNDN/C
N/C
6N135, 6N136, HCPL2503, HCPL4502
Pin 7 is not connected in
Part Number HCPL4502
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 2
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Notes:
1. Derate linearly above 70°C free-air temperature at a rate of 0.8mA/°C.
2. Derate linearly above 70°C free-air temperature at a rate of 1.6mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
Symbol Parameter Condition Value Units
T
STG
Storage Temperature -55 to +125 °C
T
OPR
Operating Temperature -55 to +100 °C
T
SOL
Lead Solder Temperature 260 for 10 sec °C
EMITTER
I
F
(avg) DC/Average Forward Input
Current Each Channel
(1)
25 mA
I
F
(pk) Peak Forward Input Current
Each Channel
(2)
50% duty cycle, 1ms P.W. 50 mA
I
F
(trans) Peak Transient Input Current
Each Channel
≤
1µs P.W., 300pps 1.0 A
V
R
Reverse Input Voltage Each
Channel
5V
P
D
Input Power Dissipation Each
Channel
6N135/6N136 and HCPL2503/4502 100 mW
HCPL-2530/253
(3)
45
DETECTOR
I
O
(avg) Average Output Current Each
Channel
8 mA
I
O
(pk) Peak Output Current Each
Channel
16 mA
V
EBR
Emitter-Base Reverse Voltage 6N135, 6N136 and HCPL2503 only 5 V
V
CC
Supply Voltage -0.5 to 30 V
V
O
Output Voltage -0.5 to 20 V
I
B
Base Current 6N135, 6N136 and HCPL2503 only 5 mA
PD Output Power Dissipation
Each Channel
6N135, 6N136, HCPL2503, HCPL4502
(4)
100 mW
HCPL2530, HCPL2531 35 mW
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 3
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics
(T
A
= 0 to 70°C Unless otherwise specified)
Individual Component Characteristics
*All Typicals at T
A
= 25°C
Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit
EMITTER
V
F
Input Forward Voltage I
F
= 16mA, T
A
=25°C 1.45 1.7 V
I
F
= 16mA 1.8
B
VR
Input Reverse Breakdown
Voltage
I
R
= 10 µA 5.0 V
∆
V
F
/
∆
T
A
Temperature Coefficient of
Forward Voltage
I
F
= 16mA -1.6 mV/°C
DETECTOR
I
OH
Logic High Output Current I
F
= 0mA, V
O
= V
CC
= 5.5V,
T
A
=25°C
All 0.001 0.5 µA
I
F
= 0mA, V
O
= V
CC
= 15V,
T
A
=25°C
6N135
6N136
HCPL4502
HCPL2503
0.005 1
I
F
= 0mA, V
O
= V
CC
= 15V All 50
I
CCL
Logic Low Supply Current I
F
= 16mA, V
O
= Open,
V
CC
= 15V
6N135
6N136
HCPL4502
HCPL2503
120 200 µA
I
F1
= I
F2
= 16mA,
V
O
= Open, V
CC
= 15V
HCPL2530
HCPL2531
200 400
I
CCH
Logic High Supply Current I
F
= 0mA, V
O
= Open,
V
CC
= 15V, T
A
=25°C
6N135
6N136
HCPL4502
HCPL2503
1µA
I
F
= 0mA, V
O
= Open,
V
CC
= 15V
6N135
6N136
HCPL4502
HCPL2503
2
I
F
= 0mA, V
O
= Open,
V
CC
= 15V
HCPL2530
HCPL2531
0.02 4
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 4
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics
(Continued) (T
A
= 0 to 70°C unless otherwise specified)
Transfer Characteristics
*All Typicals at T
A
= 25°C
Note:
5. Current Transfer Ratio is defined as a ratio of output collector current, I
O
, to the forward LED input current, I
F
,
times 100%.
Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit
COUPLED
CTR Current Transfer
Ratio
(5)
I
F
= 16mA, V
O
= 0.4 V,
V
CC
= 4.5V, T
A
=25°C
6N135
HCPL2530
71850%
6N136
HCPL4502
HCPL2531
19 27 50 %
HCPL2503 12 27 %
I
F
= 16mA,
V
CC
= 4.5V
V
OL
= 0.4V 6N135 5 21 %
V
OL
= 0.5V HCPL2530
V
OL
= 0.4V 6N136
HCPL4502
15 30 %
V
OL
= 0.5V HCPL2531
V
OL
= 0.4V HCPL2503 9 30 %
V
OL
Logic LOW Output
Voltage
I
F
= 16mA, I
O
= 1.1mA,
V
CC
= 4.5V, T
A
=25°C
6N135 0.18 0.4 V
HCPL2530 0.18 0.5
I
F
= 16mA, I
O
= 3mA,
V
CC
= 4.5V, T
A
=25°C
6N136
HCPL2503
0.25 0.4
HCPL2531 0.25 0.5
I
F
= 16mA, I
O
= 0.8mA,
V
CC
= 4.5V
6N135
HCPL2530
0.5
I
F
= 16mA, I
O
= 2.4mA,
V
CC
= 4.5V
HCPL4502
HCPL2531
0.5
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 5
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics
(Continued) (T
A
= 0 to 70°C unless otherwise specified)
Switching Characteristics
(VCC = 5V)
** All Typicals at TA = 25°C
Notes:
6. The 4.1kΩ load represents 1 LSTTL unit load of 0.36mA and 6.1kΩ pull-up resistor.
7. The 1.9kΩ load represents 1 TTL unit load of 1.6mA and 5.6kΩ pull-up resistor.
8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge
of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V).
Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge
of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V).
Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit
TPHL Propagation Delay
Time to Logic LOW
TA = 25°C, RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
6N135
HCPL2530
0.45 1.5 µs
RL = 1.9kΩ, IF = 16mA,
TA = 25°C(7) (Fig. 7)
6N136
HCPL4502
HCPL2503
HCPL2531
0.45 0.8 µs
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135
HCPL2530
2.0 µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) 6N136
HCPL4502
HCPL2503
HCPL2531
1.0 µs
TPLH Propagation Delay
Time to Logic HIGH
TA = 25°C, (RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
6N135
HCPL2530
0.5 1.5 µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
TA = 25°C
6N136
HCPL4502
HCPL2503
HCPL2531
0.3 0.8 µs
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135
HCPL2530
2.0 µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) 6N136
HCPL4502
HCPL2503
HCPL2531
1.0 µs
|CMH| Common Mode
Transient
Immunity at
Logic High
IF = 0mA, VCM = 10VP-P,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
6N135
HCPL2530
10,000 V/µs
IF = 0mA, VCM = 10VP-P,
RL = 1.9kΩ, TA = 25°C(8) (Fig. 8)
6N136
HCPL4502
HCPL2503
HCPL2531
10,000 V/µs
|CML| Common Mode
Transient
Immunity at
Logic Low
IF = 16mA, VCM = 10 VP-P,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
6N135
HCPL2530
10,000 V/µs
IF = 16mA, VCM = 10 VP-P,
RL = 1.9kΩ(8) (Fig. 8)
6N136
HCPL4502
HCPL2503
HCPL2531
10,000 V/µs
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 6
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
Isolation Characteristics (TA = 0 to 70°C Unless otherwise specified)
Notes:
9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are
shorted together.
10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
Symbol Characteristics Test Conditions Min Typ** Max Unit
II-O Input-Output Insulation
Leakage Current
Relative humidity = 45%,
TA = 25°C, t = 5s,
VI-O = 3000 VDC(9)
1.0 µA
VISO Withstand Insulation Test
Voltage
RH ≤ 50%, TA = 25°C, II-O ≤ 2µA,
t = 1 min.(9) 2500 VRMS
RI-O Resistance (Input to Output) VI-O = 500VDC(9) 1012 Ω
CI-O Capacitance (Input to Output) f = 1MHz(9) 0.6 pF
HFE DC Current Gain IO = 3mA, VO = 5V(9) 150
II-I Input-Input Insulation Leakage
Current
RH ≤ 45%, VI-I = 500VDC(10)
t = 5 s, (HCPL2530/2531 only)
0.005 µA
RI-I Input-Input Resistance VI-I = 500 VDC(10)
(HCPL2530/2531 only)
1011 Ω
CI-I Input-Input Capacitance f = 1MHz)(10)
(HCPL2530/2531 only)
0.03 pF
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 7
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Typical Performance Curves
Fig. 1 Normalized CTR vs. Forward Current
IF - FORWARD CURRENT (mA)
0.1 1 10 100
NORMALIZED CTR
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Fig. 2 Normalized CTR vs. Temperature
TA - TEMPERATURE (°C)
-60 -40 -20 0 20 40 60 80 100
NORMALIZED CTR
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Fig. 3 Output Current vs. Output Voltage
VO – OUTPUT VOLTAGE (V)
02468101214161820
I
O
– OUTPUT CURRENT (mA)
0
2
4
6
8
10
12
14
16
IF = 5mA
IF = 10mA
IF = 15mA
IF = 20mA
IF = 25mA
IF = 30mA
IF = 35mA
IF = 40mA
Normalized to:
IF = 16 mA
VO = 0.4 V
VCC = 5 V
TA = 25°C
Normalized to:
TA = 25°C
IF = 16mA
VCC = 5 V
VO = 0.4 V
Fig. 4 Logic High Output Current
vs. Temperature
TA – TEMPERATURE (°C)
-60 -40 -20 0 20 40 60 80 100
I
OH
– LOGIC HIGH OUTPUT CURRENT (nA)
0.1
1
10
100
1000
Fig. 5 Propagation Delay vs. Temperature
TA – TEMPERATURE (°C)
-60 -40 -20 0 20 40 60 80 100
Tp – PROPAGATION DELAY (ns)
0
100
200
300
400
500
600
700
800
RL = 1.9kΩ (TPHL)
R = 4.1kΩ (TPLH)
L
RL = 1.9kΩ (TPLH)
RL
= 4.1kΩ (TPLH)
Fig. 6 Propagation Delay vs. Load Resistance
RL – LOAD RESISTANCE (kΩ)
1 10
T
P
- PROPAGATION DELAY (ns)
100
1000
10000
IF - 16mA (TPHL)
IF - 10mA (TPHL)
IF - 10mA (TPLH)
IF - 16mA (TPLH)
TA = 25°C
VCC = 5 V IF = 0 mA
VCC = 5 V
VO = 5 V
IF = 16mA
VCC = 5 V
VCC = 5 V
TA = 25°C
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 8
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Test Circuits
Pulse Gen
CM
V
V
FF
B
A
+-
+5 V
O
V
-
I
F
3
4
+
F
V
-
2
1
Shield
Noise
6
O
5
GND
7
8
V
B
V
CC
V
L
R
PLH
OL
V
V
O
0
5 V
1.5 V
F
I
1.5 V
T
PHL
T
Switch at A : I = 0 mA
F
Switch at A : I = 16 mA
F
t
r
V
O
O
V
OL
V
5 V
0 V 10% 10%
90%
CM
V 10 V
4 5
Noise
1
2
3
Shield
8
7
6
+5 V
O
V
V
CC
V
01
V
02
GND
V
F1
-
+
F2
V
-
F
I+
10% DUTY CYCLE
I/f < 100µS
F
I
MONITOR
L
R
C = 1.5 µF
L
Pulse
Generator
tr = 5ns
Z = 50
O
Ω
GND
+
4 5
1
3
2
-
F2
V
V
F1
-
Shield
Noise
+5 V
CC
8
V
L
V
6
02
V
7
R
01
V
O
V
CM
A
B
Pulse Gen
F
I
+-
+
3
I Monitor
F
4
I/f < 100µs
10% D.C.
tr = 5ns
Generator
Pulse
Z = 50
O
+
V
F
I
Ω
F
-
2
1
Shield
Noise
V
O
O
6
5
GND
7
8
V
B
V
L
R
CC
V+5 V
0.1 µF
L
C = 1.5 µF
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL- 4502
0.1 µF
Test Circuit for HCPL-2530 and HCPL-2531
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL-4502 Test Circuit for HCPL-2530 and HCPL-2531
f
t
0.1 µF
0.1 µF
FF
V
m
R
m
R
90%
Fig. 7 Switching Time Test Circuit
Fig. 8 Common Mode Immunity Test Circuit
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 9
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Ordering Information
Marking Information
Option Example Part Number Description
S 6N135S Surface Mount Lead Bend
SD 6N135SD Surface Mount; Tape and reel
W 6N135W 0.4" Lead Spacing
V 6N135V VDE0884
WV 6N135WV VDE0884; 0.4” lead spacing
SV 6N135SV VDE0884; surface mount
SDV 6N135SDV VDE0884; surface mount; tape and reel
1
2
6
43 5
Definitions
1 Fairchild logo
2 Device number
3 VDE mark (Note: Only appears on parts ordered with VDE option –
See order entry table)
4 Two digit year code, e.g., ‘03’
5 Two digit work week ranging from ‘01’ to ‘53’
6 Assembly package code
2503
T1YYXXV
©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 10
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Tape Specifications
Reflow Profile
4.0 ± 0.1
Ø1.55 ± 0.05
User Direction of Feed
4.0 ± 0.1
1.75 ± 0.10
7.5 ± 0.1
16.0 ± 0.3
12.0 ± 0.1
0.30 ± 0.05
13.2 ± 0.2
4.90 ± 0.20
0.1 MAX 10.30 ± 0.20
10.30 ± 0.20
Ø1.6 ± 0.1
• Peak reflow temperature: 225C (package surface temperature)
• Time of temperature higher than 183C for 60–150 seconds
• One time soldering reflow is recommended
215 C, 10–30 s
225 C peak
Time (Minute)
0
300
250
200
150
100
50
00.5 1 1.5 2 2.5 3 3.5 4 4.5
Temperature (°C)
Time above 183C, 60–150 sec
Ramp up = 3C/sec
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
