© 2004 IXYS All rights reserved 1 - 4
419
MCC 26
MCD 26
IXYS reserves the right to change limits, test conditions and dimensions
ITRMS = 2x50 A
ITAVM = 2x32 A
VRRM = 800-1600 V
VRSM VRRM Type
VDSM VDRM
V V Version 1 B 8 B Version 1 B 8 B
900 800 MCC 26-08 io1 B / io8 B MCD 26-08 io1 B / io8 B
1300 1200 MCC 26-12 io1 B / io8 B MCD 26-12 io1 B / io8 B
1500 1400 MCC 26-14 io1 B / io8 B MCD 26-14 io1 B / io8 B
1700 1600 MCC 26-16 io1 B / io8 B MCD 26-16 io1 B / io8 B
Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated.
Features
• International standard package,
JEDEC TO-240 AA
• Direct copper bonded Al2O3 -ceramic
base plate
• Planar passivated chips
• Isolation voltage 3600 V~
• UL registered, E 72873
• Gate-cathode twin pins for version 1B
Applications
• DC motor control
• Softstart AC motor controller
• Light, heat and temperature control
Advantages
• Space and weight savings
• Simple mounting with two screws
• Improved temperature and power cycling
• Reduced protection circuits
Symbol Conditions Maximum Ratings
ITRMS, IFRMS TVJ = TVJM 50 A
ITAVM, IFAVM TC = 75°C; 180° sine 32 A
TC = 85°C; 180° sine 27 A
ITSM, IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine 520 A
VR = 0 t = 8.3 ms (60 Hz), sine 560 A
TVJ = TVJM t = 10 ms (50 Hz), sine 460 A
VR = 0 t = 8.3 ms (60 Hz), sine 500 A
∫∫
∫∫
∫i2dt TVJ = 45°C t = 10 ms (50 Hz), sine 1350 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 1300 A2s
TVJ = TVJM t = 10 ms (50 Hz), sine 1050 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 1030 A2s
(di/dt)cr TVJ = TVJM repetitive, IT = 45 A 150 A/µs
f =50 Hz, tP = 200 µs
VD = 2/3 VDRM
IG = 0.45 A non repetitive, IT = ITAVM 500 A/µs
diG/dt = 0.45 A/µs
(dv/dt)cr TVJ = TVJM;V
DR = 2/3 VDRM 1000 V/µs
RGK = ∞; method 1 (linear voltage rise)
PGM TVJ = TVJM tP = 30 µs 10 W
IT = ITAVM tP = 300 µs 5 W
PGAV 0.5 W
VRGM 10 V
TVJ -40...+125 °C
TVJM 125 °C
Tstg -40...+125 °C
VISOL 50/60 Hz, RMS t = 1 min 3000 V~
IISOL ≤ 1 mA t = 1 s 3600 V~
MdMounting torque (M5) 2.5-4.0/22-35 Nm/lb.in.
Terminal connection torque (M5) 2.5-4.0/22-35 Nm/lb.in.
Weight Typical including screws 90 g
Thyristor Modules
Thyristor/Diode Modules
6745
3
2
1
TO-240 AA
31542
MCD
Version 1 B
MCC
Version 8 B
361 52
MCD
Version 8 B
3152
MCC
Version 1 B
3671 542
© 2004 IXYS All rights reserved
2 - 4
419
MCC 26
MCD 26
IXYS reserves the right to change limits, test conditions and dimensions
Symbol Conditions Characteristic Values
IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM 3mA
VT, VFIT, IF = 80 A; TVJ = 25°C 1.64 V
VT0 For power-loss calculations only (TVJ = 125°C) 0.85 V
rT11.0 mΩ
VGT VD = 6 V; TVJ = 25°C 1.5 V
TVJ = -40°C 1.6 V
IGT VD = 6 V; TVJ = 25°C 100 mA
TVJ = -40°C 200 mA
VGD TVJ = TVJM;V
D = 2/3 VDRM 0.2 V
IGD 10 mA
ILTVJ = 25°C; tP = 10 µs; VD = 6 V 450 mA
IG = 0.45 A; diG/dt = 0.45 A/µs
IHTVJ = 25°C; VD = 6 V; RGK = ∞ 200 mA
tgd TVJ = 25°C; VD = 1/2 VDRM 2µs
IG = 0.45 A; diG/dt = 0.45 A/µs
tqTVJ = TVJM; IT = 20 A, tP = 200 µs; -di/dt = 10 A/µs typ. 150 µs
VR = 100 V; dv/dt = 20 V/µs; VD = 2/3 VDRM
QSTVJ = TVJM; IT, IF = 25 A, -di/dt = 0.64 A/µs 50 µC
IRM 6A
RthJC per thyristor/diode; DC current 0.88 K/W
per module other values 0.44 K/W
RthJK per thyristor/diode; DC current see Fig. 8/9 1.08 K/W
per module 0.54 K/W
dSCreepage distance on surface 12.7 mm
dAStrike distance through air 9.6 mm
aMaximum allowable acceleration 50 m/s2
Optional accessories for module-type MCC 26 version 1 B
Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode
= red
Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385,
Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1
Dimensions in mm (1 mm = 0.0394")
MCC Version 1 B MCC Version 8 B MCD Version 8 B
10 100 1000
1
10
100
1000
100101102103104
0.1
1
10
IG
VG
mA
mA
IG
1: IGT, TVJ = 125°C
2: IGT, TVJ = 25°C
3: IGT, TVJ = -40°C
µs
tgd
V
4: PGAV = 0.5 W
5: PGM = 5 W
6: PGM = 10 W
IGD, TVJ = 125°C
3
4
2
1
56
Limit
typ.
TVJ = 25°C
Fig. 1 Gate trigger characteristics
Fig. 2 Gate trigger delay time
© 2004 IXYS All rights reserved 3 - 4
419
MCC 26
MCD 26
IXYS reserves the right to change limits, test conditions and dimensions
Fig. 3 Surge overload current
ITSM, IFSM: Crest value, t: duration
Fig. 4 ∫i2dt versus time (1-10 ms) Fig. 4a Maximum forward current
at case temperature
Fig. 5 Power dissipation versus on-state
current and ambient temperature
(per thyristor or diode)
Fig. 6 Three phase rectifier bridge:
Power dissipation versus direct
output current and ambient
temperature
© 2004 IXYS All rights reserved
4 - 4
419
MCC 26
MCD 26
IXYS reserves the right to change limits, test conditions and dimensions
Fig. 7 Three phase AC-controller:
Power dissipation versus RMS
output current and ambient
temperature
Fig. 8 Transient thermal impedance
junction to case (per thyristor or
diode)
Fig. 9 Transient thermal impedance
junction to heatsink (per thyristor
or diode)
RthJC for various conduction angles d:
d RthJC (K/W)
DC 0.88
180° 0.92
120° 0.95
60° 0.98
30° 1.01
Constants for ZthJC calculation:
iR
thi (K/W) ti (s)
1 0.019 0.0031
2 0.029 0.0216
3 0.832 0.191
RthJK for various conduction angles d:
d RthJK (K/W)
DC 1.08
180° 1.12
120° 1.15
60° 1.18
30° 1.21
Constants for ZthJK calculation:
iR
thi (K/W) ti (s)
1 0.019 0.0031
2 0.029 0.0216
3 0.832 0.191
4 0.2 0.45
