Product family data sheet
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo,
XLamp® and EasyWhite® are registered trademarks and XM-L™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS38 REV 8H
Cree® XLamp® XM-L™ EasyWhite® LEDs
PRODUCT DESCRIPTION
The XLamp® XM-L™ EasyWhite® (EZW)
LED eliminates chromaticity binning, and
enables luminaire and bulb manufacturers
to deliver the consistent color and high
efcacy light output of a multi‑die LED in
the compact XM-L footprint. XLamp XM-L
EasyWhite LEDs can reduce LED-to-LED
color variation to within a 2-step MacAdam
ellipse, 94% smaller than the total area of
the corresponding ANSI C78.377 color
region.
The XLamp XM-L EasyWhite LED is the
perfect choice for lighting applications
where moderate to high luminous ux
output is required from a single, small
point source. Example applications
include: LED retrot bulbs, commercial/
retail display spotlights, and other indoor
general-illumination applications.
FEATURES
• Available in 4-step and 2-step
EasyWhite bins at 2700K, 3000K,
3500K, 4000K, 5000K CCT
• Wide range of operating current–up
to 2A @ 6V
• 85°C binning and characterization
• Available in 6‑V and 12‑V versions
• Low thermal resistance: 2.5°C/W
• Wide viewing angle: 115°
• Wide variety of CRI choices: standard
CRI as well as 80-, 85-, 90-minimum
CRI
• Electrically neutral thermal path
• Unlimited oor life at ≤30ºC/85%
RH
• Reow solderable ‑ JEDEC
J‑STD‑020C
• RoHS and REACh compliant
• UL® recognized component
(E349212)
TABLE OF CONTENTS
Characteristics ...........................................2
Flux Characteristics, Standard Order
Codes and Bins, 6‑Volt XM‑L EZW ............3
Flux Characteristics, Standard Order
Codes and Bins, 12‑Volt XM‑L EZW ..........6
Relative Spectral Power Distribution ........9
Relative Flux vs. Junction Temperature ....9
Electrical Characteristics .........................10
Relative Flux vs. Current ..........................11
Relative Chromaticity vs. Current and
Temperature .............................................12
Typical Spatial Distribution ......................13
Thermal Design ........................................13
Performance Groups – Brightness .........14
Performance Groups – Chromaticity ......14
Cree EasyWhite® Bins Plotted on the
1931 CIE Color Space ..............................15
Cree ANSI White Bins Plotted on the
1931 CIE Color Space ..............................16
Bin and Order Code Formats ...................16
Reow Soldering Characteristics ............17
Notes ........................................................18
Mechanical Dimensions ..........................20
Tape and Reel ........................................... 21
Packaging .................................................22
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® Xm-L™ EasyWhitE® LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 2.5
Viewing angle (FWHM) degrees 115
Temperature coefcient of voltage (6V) mV/°C ‑6.0
Temperature coefcient of voltage (12V) mV/°C ‑12.0
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
DC forward current (6V) mA 2000
DC forward current (12V) mA 1000
Reverse current (6V, 12V) mA ‑0.1
Forward voltage (@ 700mA, 85°C, 6V) V 5.7 7.0
Forward voltage (@ 350mA, 85°C, 12V) V11.5 14.0
LED junction temperature °C 150
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 18).
• For Standard CRI parts, typical CRI is 80 for 4000 – 3500K CCT parts and 82 for 3000 – 2700K CCT parts.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® Xm-L™ EasyWhitE® LED
mA, TJ
The following table provides the order codes for 6‑Volt XLamp XM‑L EZW LEDs.
Color CCT
Range
Minimum Luminous Flux
 2-Step 4-Step
Group
Flux


Flux


Chromaticity
Region Order Code Chromaticity
Region Order Code
Standard
CRI
EasyWhite
5000 K
U4 340 404
50H
XMLEZW-00-0000-0B00U450H
50F
XMLEZW-00-0000-0B00U450F
U5 360 427 XMLEZW-00-0000-0B00U550H XMLEZW-00-0000-0B00U550F
U6 380 451 XMLEZW‑00‑0000‑0B00U650H XMLEZW‑00‑0000‑0B00U650F
V2 400 475 XMLEZW-00-0000-0B00V250H XMLEZW-00-0000-0B00V250F
4000 K
U2 300 356
40H
XMLEZW-00-0000-0B00U240H
40F
XMLEZW-00-0000-0B00U240F
U3 320 380 XMLEZW-00-0000-0B00U340H XMLEZW-00-0000-0B00U340F
U4 340 404 XMLEZW-00-0000-0B00U440H XMLEZW-00-0000-0B00U440F
3500 K
T6 280 332
35H
XMLEZW‑00‑0000‑0B00T635H
35F
XMLEZW‑00‑0000‑0B00T635F
U2 300 356 XMLEZW-00-0000-0B00U235H XMLEZW-00-0000-0B00U235F
U3 320 380 XMLEZW-00-0000-0B00U335H XMLEZW-00-0000-0B00U335F
3000 K
T5 260 309
30H
XMLEZW-00-0000-0B00T530H
30F
XMLEZW-00-0000-0B00T530F
T6 280 332 XMLEZW‑00‑0000‑0B00T630H XMLEZW‑00‑0000‑0B00T630F
U2 300 356 XMLEZW-00-0000-0B00U230H XMLEZW-00-0000-0B00U230F
U3 320 380 XMLEZW-00-0000-0B00U330H XMLEZW-00-0000-0B00U330F
2700 K
T4 240 285
27H
XMLEZW-00-0000-0B00T427H
27F
XMLEZW-00-0000-0B00T427F
T5 260 309 XMLEZW-00-0000-0B00T527H XMLEZW-00-0000-0B00T527F
T6 280 332 XMLEZW‑00‑0000‑0B00T627H XMLEZW‑00‑0000‑0B00T627F
U2 300 356 XMLEZW-00-0000-0B00U227H XMLEZW-00-0000-0B00U227F
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 18).
• For Standard CRI parts, typical CRI is 80 for 4000 – 3500K CCT parts and 82 for 3000 – 2700K CCT parts.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® Xm-L™ EasyWhitE® LED
Color CCT
Range
Minimum Luminous Flux
 2-Step 4-Step
Group
Flux


Flux


Chromaticity
Region Order Code Chromaticity
Region Order Code
80-CRI
Minimum
EasyWhite
4000K
T6 280 332
40H
XMLEZW‑00‑0000‑0B0HT640H
40F
XMLEZW‑00‑0000‑0B0HT640F
U2 300 356 XMLEZW-00-0000-0B0HU240H XMLEZW-00-0000-0B0HU240F
U3 320 380 XMLEZW-00-0000-0B0HU340H XMLEZW-00-0000-0B0HU340F
U4 340 404 XMLEZW-00-0000-0B0HU440H XMLEZW-00-0000-0B0HU440F
3500K
T5 260 309
35H
XMLEZW-00-0000-0B0HT535H
35F
XMLEZW-00-0000-0B0HT535F
T6 280 332 XMLEZW‑00‑0000‑0B0HT635H XMLEZW‑00‑0000‑0B0HT635F
U2 300 356 XMLEZW-00-0000-0B0HU235H XMLEZW-00-0000-0B0HU235F
U3 320 380 XMLEZW-00-0000-0B0HU335H XMLEZW-00-0000-0B0HU335F
3000K
T5 260 309
30H
XMLEZW-00-0000-0B0HT530H
30F
XMLEZW-00-0000-0B0HT530F
T6 280 332 XMLEZW‑00‑0000‑0B0HT630H XMLEZW‑00‑0000‑0B0HT630F
U2 300 356 XMLEZW-00-0000-0B0HU230H XMLEZW-00-0000-0B0HU230F
U3 320 380 XMLEZW-00-0000-0B0HU330H XMLEZW-00-0000-0B0HU330F
2700K
T4 240 285
27H
XMLEZW-00-0000-0B0HT427H
27F
XMLEZW-00-0000-0B0HT427F
T5 260 309 XMLEZW-00-0000-0B0HT527H XMLEZW-00-0000-0B0HT527F
T6 280 332 XMLEZW‑00‑0000‑0B0HT627H XMLEZW‑00‑0000‑0B0HT627F
U2 300 356 XMLEZW-00-0000-0B0HU227H XMLEZW-00-0000-0B0HU227F
85-CRI
Minimum
EasyWhite
3000K
T3 220 261
30H
XMLEZW-00-0000-0B0PT330H
30F
XMLEZW-00-0000-0B0PT330F
T4 240 285 XMLEZW-00-0000-0B0PT430H XMLEZW-00-0000-0B0PT430F
T5 260 309 XMLEZW-00-0000-0B0PT530H XMLEZW-00-0000-0B0PT530F
T6 280 332 XMLEZW‑00‑0000‑0B0PT630H XMLEZW‑00‑0000‑0B0PT630F
2700K
T2 200 237
27H
XMLEZW-00-0000-0B0PT227H
27F
XMLEZW-00-0000-0B0PT227F
T3 220 261 XMLEZW-00-0000-0B0PT327H XMLEZW-00-0000-0B0PT327F
T4 240 285 XMLEZW-00-0000-0B0PT427H XMLEZW-00-0000-0B0PT427F
T5 260 309 XMLEZW-00-0000-0B0PT527H XMLEZW-00-0000-0B0PT527F
mA, TJ
CONTINUED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 18).
• For Standard CRI parts, typical CRI is 80 for 4000 – 3500K CCT parts and 82 for 3000 – 2700K CCT parts.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® Xm-L™ EasyWhitE® LED
Color CCT
Range
Minimum Luminous Flux
 2-Step 4-Step
Group
Flux


Flux


Chromaticity
Region Order Code Chromaticity
Region Order Code
90-CRI
Minimum
EasyWhite
3000K
T2 200 237
30H
XMLEZW-00-0000-0B0UT230H
30F
XMLEZW-00-0000-0B0UT230F
T3 220 261 XMLEZW-00-0000-0B0UT330H XMLEZW-00-0000-0B0UT330F
T4 240 285 XMLEZW-00-0000-0B0UT430H XMLEZW-00-0000-0B0UT430F
T5 260 309 XMLEZW-00-0000-0B0UT530H XMLEZW-00-0000-0B0UT530F
2700K
S6 180 214
27H
XMLEZW‑00‑0000‑0B0US627H
27F
XMLEZW‑00‑0000‑0B0US627F
T2 200 237 XMLEZW-00-0000-0B0UT227H XMLEZW-00-0000-0B0UT227F
T3 220 261 XMLEZW-00-0000-0B0UT327H XMLEZW-00-0000-0B0UT327F
T4 240 285 XMLEZW-00-0000-0B0UT427H XMLEZW-00-0000-0B0UT427F
Color CCT Range
Minimum Luminous Flux
 Chromaticity Regions Order Code
Group 



ANSI White 5000 K
U4 340 404
0E3
XMLEZW-00-0000-0B00U40E3
U5 360 427 XMLEZW-00-0000-0B00U50E3
U6 380 451 XMLEZW‑00‑0000‑0B00U60E3
V2 400 475 XMLEZW-00-0000-0B00V20E3
mA, TJ
CONTINUED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 18).
• For Standard CRI parts, typical CRI is 80 for 4000 – 3500K CCT parts and 82 for 3000 – 2700K CCT parts.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® Xm-L™ EasyWhitE® LED
mA, TJ
The following table provides the order codes for 12‑Volt XLamp XM‑L EZW LEDs.
Color CCT
Range
Minimum Luminous Flux
 2-Step 4-Step
Group
Flux


Flux


Chromaticity
Region Order Code Chromaticity
Region Order Code
Standard
CRI
EasyWhite
5000 K
U4 340 404
50H
XMLEZW-00-0000-0D00U450H
50F
XMLEZW-00-0000-0D00U450F
U5 360 427 XMLEZW-00-0000-0D00U550H XMLEZW-00-0000-0D00U550F
U6 380 451 XMLEZW‑00‑0000‑0D00U650H XMLEZW‑00‑0000‑0D00U650F
V2 400 475 XMLEZW-00-0000-0D00V250H XMLEZW-00-0000-0D00V250F
4000 K
U2 300 356
40H
XMLEZW-00-0000-0D00U240H
40F
XMLEZW-00-0000-0D00U240F
U3 320 380 XMLEZW-00-0000-0D00U340H XMLEZW-00-0000-0D00U340F
U4 340 404 XMLEZW-00-0000-0D00U440H XMLEZW-00-0000-0D00U440F
3500 K
T6 280 332
35H
XMLEZW‑00‑0000‑0D00T635H
35F
XMLEZW‑00‑0000‑0D00T635F
U2 300 356 XMLEZW-00-0000-0D00U235H XMLEZW-00-0000-0D00U235F
U3 320 380 XMLEZW-00-0000-0D00U335H XMLEZW-00-0000-0D00U335F
3000 K
T5 260 309
30H
XMLEZW-00-0000-0D00T530H
30F
XMLEZW-00-0000-0D00T530F
T6 280 332 XMLEZW‑00‑0000‑0D00T630H XMLEZW‑00‑0000‑0D00T630F
U2 300 356 XMLEZW-00-0000-0D00U230H XMLEZW-00-0000-0D00U230F
U3 320 380 XMLEZW-00-0000-0D00U330H XMLEZW-00-0000-0D00U330F
2700 K
T4 240 285
27H
XMLEZW-00-0000-0D00T427H
27F
XMLEZW-00-0000-0D00T427F
T5 260 309 XMLEZW-00-0000-0D00T527H XMLEZW-00-0000-0D00T527F
T6 280 332 XMLEZW‑00‑0000‑0D00T627H XMLEZW‑00‑0000‑0D00T627F
U2 300 356 XMLEZW-00-0000-0D00U227H XMLEZW-00-0000-0D00U227F
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 18).
• For Standard CRI parts, typical CRI is 80 for 4000 – 3500K CCT parts and 82 for 3000 – 2700K CCT parts.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® Xm-L™ EasyWhitE® LED
Color CCT
Range
Minimum Luminous Flux
 2-Step 4-Step
Group
Flux


Flux


Chromaticity
Region Order Code Chromaticity
Region Order Code
80-CRI
Minimum
EasyWhite
4000K
T6 280 332
40H
XMLEZW‑00‑0000‑0D0HT640H
40F
XMLEZW‑00‑0000‑0D0HT640F
U2 300 356 XMLEZW-00-0000-0D0HU240H XMLEZW-00-0000-0D0HU240F
U3 320 380 XMLEZW-00-0000-0D0HU340H XMLEZW-00-0000-0D0HU340F
U4 340 404 XMLEZW-00-0000-0D0HU440H XMLEZW-00-0000-0D0HU440F
3500K
T5 260 309
35H
XMLEZW-00-0000-0D0HT535H
35F
XMLEZW-00-0000-0D0HT535F
T6 280 332 XMLEZW‑00‑0000‑0D0HT635H XMLEZW‑00‑0000‑0D0HT635F
U2 300 356 XMLEZW-00-0000-0D0HU235H XMLEZW-00-0000-0D0HU235F
U3 320 380 XMLEZW-00-0000-0D0HU335H XMLEZW-00-0000-0D0HU335F
3000K
T5 260 309
30H
XMLEZW-00-0000-0D0HT530H
30F
XMLEZW-00-0000-0D0HT530F
T6 280 332 XMLEZW‑00‑0000‑0D0HT630H XMLEZW‑00‑0000‑0D0HT630F
U2 300 356 XMLEZW-00-0000-0D0HU230H XMLEZW-00-0000-0D0HU230F
U3 320 380 XMLEZW-00-0000-0D0HU330H XMLEZW-00-0000-0D0HU330F
2700K
T4 240 285
27H
XMLEZW-00-0000-0D0HT427H
27F
XMLEZW-00-0000-0D0HT427F
T5 260 309 XMLEZW-00-0000-0D0HT527H XMLEZW-00-0000-0D0HT527F
T6 280 332 XMLEZW‑00‑0000‑0D0HT627H XMLEZW‑00‑0000‑0D0HT627F
U2 300 356 XMLEZW-00-0000-0D0HU227H XMLEZW-00-0000-0D0HU227F
85-CRI
Minimum
EasyWhite
3000K
T3 220 261
30H
XMLEZW-00-0000-0D0PT330H
30F
XMLEZW-00-0000-0D0PT330F
T4 240 285 XMLEZW-00-0000-0D0PT430H XMLEZW-00-0000-0D0PT430F
T5 260 309 XMLEZW-00-0000-0D0PT530H XMLEZW-00-0000-0D0PT530F
T6 280 332 XMLEZW‑00‑0000‑0D0PT630H XMLEZW‑00‑0000‑0D0PT630F
2700K
T2 200 237
27H
XMLEZW-00-0000-0D0PT227H
27F
XMLEZW-00-0000-0D0PT227F
T3 220 261 XMLEZW-00-0000-0D0PT327H XMLEZW-00-0000-0D0PT327F
T4 240 285 XMLEZW-00-0000-0D0PT427H XMLEZW-00-0000-0D0PT427F
T5 260 309 XMLEZW-00-0000-0D0PT527H XMLEZW-00-0000-0D0PT527F
mA, TJ
CONTINUED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 18).
• For Standard CRI parts, typical CRI is 80 for 4000 – 3500K CCT parts and 82 for 3000 – 2700K CCT parts.
* Flux values @ 25°C are calculated and for reference only.
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® Xm-L™ EasyWhitE® LED
Color CCT
Range
Minimum Luminous Flux
 2-Step 4-Step
Group
Flux


Flux


Chromaticity
Region Order Code Chromaticity
Region Order Code
90-CRI
Minimum
EasyWhite
3000K
T2 200 237
30H
XMLEZW-00-0000-0D0UT230H
30F
XMLEZW-00-0000-0D0UT230F
T3 220 261 XMLEZW-00-0000-0D0UT330H XMLEZW-00-0000-0D0UT330F
T4 240 285 XMLEZW-00-0000-0D0UT430H XMLEZW-00-0000-0D0UT430F
T5 260 309 XMLEZW-00-0000-0D0UT530H XMLEZW-00-0000-0D0UT530F
2700K
S6 180 214
27H
XMLEZW‑00‑0000‑0D0US627H
27F
XMLEZW‑00‑0000‑0D0US627F
T2 200 237 XMLEZW-00-0000-0D0UT227H XMLEZW-00-0000-0D0UT227F
T3 220 261 XMLEZW-00-0000-0D0UT327H XMLEZW-00-0000-0D0UT327F
T4 240 285 XMLEZW-00-0000-0D0UT427H XMLEZW-00-0000-0D0UT427F
Color CCT Range
Minimum Luminous Flux
 Chromaticity Regions Order Code
Group 



ANSI White 5000 K
U4 340 404
0E3
XMLEZW-00-0000-0D00U40E3
U5 360 427 XMLEZW-00-0000-0D00U50E3
U6 380 451 XMLEZW‑00‑0000‑0D00U60E3
V2 400 475 XMLEZW-00-0000-0D00V20E3
mA, TJ
CONTINUED
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® Xm-L™ EasyWhitE® LED
RELATIVE SPECTRAL POWER DISTRIBUTION
RELATIVE FLUX VS. JUNCTION TEMPERATURE (6-V - IF mA; 12-V - IF m
Relative Spectral Power
0
20
40
60
80
100
380 430 480 530 580 630 680 730 780
Relative Radiant Power (%)
Wavelength (nm)
5000 K CCT
3000 K CCT
Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® Xm-L™ EasyWhitE® LED
ELECTRICAL CHARACTERISTICS (TJ
Electrical Characteristics (Tj = 85ºC)
0
250
500
750
1000
1250
1500
1750
2000
5.2 5.4 5.6 5.8 6.0 6.2 6.4
Forward Current (mA)
Forward Voltage (V)
6 V
0
250
500
750
1000
10.0 10.5 11.0 11.5 12.0 12.5 13.0
Forward Current (mA)
12 V
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® Xm-L™ EasyWhitE® LED
RELATIVE FLUX VS. CURRENT (TJ
LF vs. I @ 85
0%
25%
50%
75%
100%
125%
150%
175%
200%
225%
0 250 500 750 1000 1250 1500 1750 2000
Relative Luminous Flux
Forward Current (mA)
6 V
not used and not roboto
0%
25%
50%
75%
100%
125%
150%
175%
200%
225%
0 200 400 600 800 1000
Relative Luminous Flux
Forward Current (mA)
12 V
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® Xm-L™ EasyWhitE® LED
RELATIVE CHROMATICITY VS. CURRENT AND TEMPERATURE
XLamp XM-L EZW LED, 6-V
XLamp XM-L EZW LED, 12-V
XLamp XM-L EZW LED, 6-V, 12V
XM-L EZW 6V
XM-L EZW 12V
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
0 400 800 1200 1600 2000
Current (mA)
ΔCCx
ΔCCy
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
0 200 400 600 800 1000
Current (mA)
ΔCCx
ΔCCy
XM-L EZW 6V
XM-L EZW 12V
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
0 400 800 1200 1600 2000
Current (mA)
ΔCCx
ΔCCy
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
0 200 400 600 800 1000
Current (mA)
ΔCCx
ΔCCy
XM-L EZW, 6V, 12V
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
25 50 75 100 125 150
Tsp (°C)
ΔCCx
ΔCCy
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® Xm-L™ EasyWhitE® LED
TYPICAL SPATIAL DISTRIBUTION
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
XLamp XM-L EZW LED, 6-V XLamp XM-L EZW LED, 12-V
Typical Spatial Radiation Pattern
0
20
40
60
80
100
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity (%)
Angle (º)
Thermal Design (6V) from XML DS
0
500
1000
1500
2000
2500
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 4 °C/W
Rj-a = 7 °C/W
Rj-a = 10 °C/W
Rj-a = 15 °C/W
Thermal Design (12V) from XML DS
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 4 °C/W
Rj-a = 7 °C/W
Rj-a = 10 °C/W
Rj-a = 15 °C/W
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp® Xm-L™ EasyWhitE® LED
PERFORMANCE GROUPS – BRIGHTNESS (TJ
XLamp XM‑L EasyWhite LEDs are tested for luminous ux and placed into one the following bins.
Group Code
Minimum Luminous


Maximum Luminous


S6 180 200
T2 200 220
T3 220 240
T4 240 260
T5 260 280
T6 280 300
U2 300 320
U3 320 340
U4 340 360
U5 360 380
U6 380 400
V2 400 420
PERFORMANCE GROUPS – CHROMATICITY (TJ
XLamp XM‑L EasyWhite LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
EasyWhite Color Temperatures – 4-Step
Code CCT x y
50F 5000 K
0.3407 0.3459
0.3415 0.3586
0.3499 0.3654
0.3484 0.3521
40F 4000 K
0.3744 0.3685
0.3782 0.3837
0.3912 0.3917
0.3863 0.3758
35F 3500 K
0.3981 0.3800
0.4040 0.3966
0.4186 0.4037
0.4116 0.3865
30F 3000 K
0.4242 0.3919
0.4322 0.4096
0.4449 0.4141
0.4359 0.3960
27F 2700 K
0.4475 0.3994
0.4573 0.4178
0.4695 0.4207
0.4589 0.4021
EasyWhite Color Temperatures – 2-Step
Code CCT x y
50H 5000 K
0.3429 0.3507
0.3434 0.3571
0.3475 0.3604
0.3469 0.3539
40H 4000 K
0.3784 0.3741
0.3804 0.3818
0.3867 0.3857
0.3844 0.3778
35H 3500 K
0.4030 0.3857
0.4061 0.3941
0.4132 0.3976
0.4099 0.3890
30H 3000 K
0.4291 0.3973
0.4333 0.4062
0.4395 0.4084
0.4351 0.3994
27H 2700 K
0.4528 0.4046
0.4578 0.4138
0.4638 0.4152
0.4586 0.4060
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp® Xm-L™ EasyWhitE® LED
PERFORMANCE GROUPS – CHROMATICITY (TJ
CREE EASYWHITE® BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ
ANSI White Bins
Code CCT Bin
Code x y
0E3 5000 K
3A0
.3371 .3490
.3451 .3554
.3440 .3427
.3366 .3369
3B0
.3376 .3616
.3463 .3687
.3451 .3554
.3371 .3490
3C0
.3463 .3687
.3551 .3760
.3533 .3620
.3451 .3554
3D0
.3451 .3554
.3533 .3620
.3515 .3487
.3440 .3427
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
5700 K
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI C78.377 Quadrangle
EasyWhite 4-step
EasyWhite 2-step
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp® Xm-L™ EasyWhitE® LED
CREE ANSI WHITE BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ
BIN AND ORDER CODE FORMATS
Bin codes and order codes are congured as follows:
Order Code Bin Code
2600 K
2700 K
2900 K
3000 K
3200 K
3500 K
3700 K
4000 K
4300 K
4500 K
4750 K
5000 K
5300 K
3A0
3B0
3C0
3D0
5A0
5B0
5C0
5D0
6A0
6B0
6C0
6D0
7A0
7B0
7C0
7D0
8A0
8B0 8C0
8D0
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
2600K
2700K
2900K
3000K
3200K
3500K
3700K
4000K
4300K
4500K
4750K
5000K
5300K
3A0
3B0
3C0
3D0
5A0
5B0
5C0
5D0
6A0
6B0
6C0
6D0
7A0
7B0
7C0
7D0
8A0
8B0
8C0
8D0
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
2700K
3000K
3500K
4000K
4500K
5000K
5700K
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI C78.377 Quadrangle
EasyWhite 4-step
EasyWhite 2-step
SSSCCC-B-WWW-FFF-GAAAAAA
Series
XML = XM-L
Internal code
Flux bin
Internal code
Vf class
B = 6-V class
D = 12-V class
Chromaticity bin
Color
EZW = EasyWhite
SSSCCC-BB-HHHH-HGNNNNNNN
Series
XML = XM-L
Internal code
Kit code
Vf class
B = 6-V class
D = 12-V class
Reel size
0 = 1000 (standard)
Color
EZW = EasyWhite
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp® Xm-L™ EasyWhitE® LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XM‑L EasyWhite LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As
a general guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp)1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax)170 °C
Preheat: Time (tsmin to tsmax)65‑150 seconds
Time Maintained Above: Temperature (TL)217 °C
Time Maintained Above: Time (tL) 45-90 seconds
Peak/Classication Temperature (Tp) 235 ‑ 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 ‑ 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp® Xm-L™ EasyWhitE® LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.

Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long‑term reliability for XLamp
LEDs and details of Cree’s pre‑release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM‑80‑08 and TM‑21‑11 methods for collecting long‑term data and extrapolating LED lumen maintenance.
For information on the specic LM‑80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XM‑L EasyWhite LEDs may be stored as MSL 1 per JEDEC J‑STD‑033, meaning they have unlimited oor
life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up‑to‑date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp® Xm-L™ EasyWhitE® LED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING. Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
NOTES - CONTINUED
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp® Xm-L™ EasyWhitE® LED
MECHANICAL DIMENSIONS
Thermal vias, if present, are not shown on these drawings.
All measurements are ±.13 mm unless otherwise indicated.
Bottom View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
5.00
5.00
R2.26
3.02
.73
4.78
.50
.50
2.78
3.78
4.78
4.78
.80
.25
.50
.97
4.78
.80
.25
4.78
4.78
2.78
.50
.50
1/116.000
A
2610-00039
OUTLINE DRAWING, XML EZW
--
--
----
----
2/2/14D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A NEW RELEASE DC 2/2/14
RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
Anode
Top View Side View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
5.00
5.00
R2.26
3.02
.73
4.78
.50
.50
2.78
3.78
4.78
4.78
.80
.25
.50
.97
4.78
.80
.25
4.78
4.78
2.78
.50
.50
1/116.000
A
2610-00039
OUTLINE DRAWING, XML EZW
--
--
----
----
2/2/14D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A NEW RELEASE DC 2/2/14
RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
5.00
5.00
R2.26
3.02
.73
4.78
.50
.50
2.78
3.78
4.78
4.78
.80
.25
.50
.97
4.78
.80
.25
4.78
4.78
2.78
.50
.50
1/116.000
A
2610-00039
OUTLINE DRAWING, XML EZW
--
--
----
----
2/2/14D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A NEW RELEASE DC 2/2/14
RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
Recommended PCB Solder Pad Recommended Stencil Pattern

Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp® Xm-L™ EasyWhitE® LED
TAPE AND REEL
All Cree carrier tapes conform to EIA‑481D, Automated Component Handling Systems Standard.
All dimensions in mm.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTANED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
SURFACE FINISH:
63
330
+.25
-.75
12.4
+1.0
-.5
MEASURED AT EDGE
16.4
+0.2
.0
MEASURED AT HUB
12.4
+.2
.0
MEASURED AT HUB
±.213.1
1.9±.4
±.421
60° 60°
1/10.500
A
2400-00009
REEL, 13" X 12MM, 3 PIECE SNAP
-
ANTI-STATIC HIPS
----
----
09/29/09D. CRONIN
2400-00009
INDEX QTY ITEM COMMENTS
1 1 2400-00009-CORE
2 2 2400-00009-REEL
REVISONS
REV DESCRIPTION BY DATE APP'D
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
Trailer
160mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
Loaded Pockets
(1000 Lamps)
Leader
400mm (min.) of
empty pockets with
at least 100mm
sealed by tape
(40 empty pockets min.)
12
1.75
4
83.35
1/13.000
B
2402-00012
XM LOADING SPEC
--
--
----
----
06/08/10D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A Loaded pocket count was 750 DDS 11/8/10 BS
B MADE CATHODE AND ANODE NOTE LARGER DC 2/26/12
END START
User Feed Direction
CATHODE SIDE
ANODE SIDE
1
234
6 5
D
C
B
A
APP'DDATEBY
REVISIONS
REV DESCRIPTION
SIZE
TITLE
OF
REV.
SHEET
A
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
1
23456
4600 Silicon Drive
Fax (919) 313-5558
Durham, N.C 27703
Phone (919) 313-5300
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
63
1/1DRAWING SCALE
A
2402-00011
XM 5050 CARRIER TAPE
4/23/10 D. CRONIN
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
.36[.014]
T
5.40[.213]
Ao
3.35[.132]
Ko
3.0°
5.40[.213]
Bo
2.00[.079]
P2
4.00[.157]
Po
Do1.50 +.10
-.00 .0591 +.0039
-.0000 [ ]
10.25
[.404]
E2
7.0°
12.00[.472]
NOMINAL
12.30 [.484]
MAX
W
1.75[.069]
E1
5.50[.217]F
1.50[.059]
D1
8.00[.315]
P
POCKET SIZE
Ao - 5.40mm [.213"]
Bo - 5.40mm [.213"]
Ko - 3.35mm [.132"]
1
234
6 5
D
C
B
A
APP'DDATEBY
REVISIONS
REV DESCRIPTION
SIZE
TITLE
OF
REV.
SHEET
A
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
1
23456
4600 Silicon Drive
Fax (919) 313-5558
Durham, N.C 27703
Phone (919) 313-5300
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
63
1/1DRAWING SCALE
A
2402-00011
XM 5050 CARRIER TAPE
4/23/10 D. CRONIN
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
.36[.014]
T
5.40[.213]
Ao
3.35[.132]
Ko
3.0°
5.40[.213]
Bo
2.00[.079]
P2
4.00[.157]
Po
Do1.50 +.10
-.00 .0591 +.0039
-.0000 [ ]
10.25
[.404]
E2
7.0°
12.00[.472]
NOMINAL
12.30 [.484]
MAX
W
1.75[.069]
E1
5.50[.217]F
1.50[.059]
D1
8.00[.315]
P
POCKET SIZE
Ao - 5.40mm [.213"]
Bo - 5.40mm [.213"]
Ko - 3.35mm [.132"]
1
234
6 5
D
C
B
A
APP'DDATEBY
REVISIONS
REV DESCRIPTION
SIZE
TITLE
OF
REV.
SHEET
A
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
1
23456
4600 Silicon Drive
Fax (919) 313-5558
Durham, N.C 27703
Phone (919) 313-5300
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
63
1/1DRAWING SCALE
A
2402-00011
XM 5050 CARRIER TAPE
4/23/10 D. CRONIN
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
.36[.014]
T
5.40[.213]
Ao
3.35[.132]
Ko
3.0°
5.40[.213]
Bo
2.00[.079]
P2
4.00[.157]
Po
Do1.50 +.10
-.00 .0591 +.0039
-.0000 [ ]
10.25
[.404]
E2
7.0°
12.00[.472]
NOMINAL
12.30 [.484]
MAX
W
1.75[.069]
E1
5.50[.217]F
1.50[.059]
D1
8.00[.315]
P
POCKET SIZE
Ao - 5.40mm [.213"]
Bo - 5.40mm [.213"]
Ko - 3.35mm [.132"]
Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and XM-L™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp® Xm-L™ EasyWhitE® LED
PACKAGING
Label with Cree Bin
Code, Qty, Lot # Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Dessicant
(inside bag)
Humidity Indicator
Card (inside bag)
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
Patent Label
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cree, Inc.:
XMLEZW-00-0000-0B00T427F XMLEZW-00-0000-0B00T427H XMLEZW-00-0000-0B00T527F XMLEZW-00-0000-
0B00T527H XMLEZW-00-0000-0B00T530F XMLEZW-00-0000-0B00T530H XMLEZW-00-0000-0B00T627F
XMLEZW-00-0000-0B00T627H XMLEZW-00-0000-0B00T630F XMLEZW-00-0000-0B00T630H XMLEZW-00-0000-
0B00T635F XMLEZW-00-0000-0B00T635H XMLEZW-00-0000-0B00U227F XMLEZW-00-0000-0B00U227H
XMLEZW-00-0000-0B00U230F XMLEZW-00-0000-0B00U230H XMLEZW-00-0000-0B00U235F XMLEZW-00-0000-
0B00U235H XMLEZW-00-0000-0B00U240F XMLEZW-00-0000-0B00U240H XMLEZW-00-0000-0B00U330F
XMLEZW-00-0000-0B00U330H XMLEZW-00-0000-0B00U335F XMLEZW-00-0000-0B00U335H XMLEZW-00-0000-
0B00U340F XMLEZW-00-0000-0B00U340H XMLEZW-00-0000-0B00U440F XMLEZW-00-0000-0B00U440H
XMLEZW-00-0000-0B0HT427F XMLEZW-00-0000-0B0HT427H XMLEZW-00-0000-0B0HT527F XMLEZW-00-0000-
0B0HT527H XMLEZW-00-0000-0B0HT530F XMLEZW-00-0000-0B0HT530H XMLEZW-00-0000-0B0HT535F
XMLEZW-00-0000-0B0HT535H XMLEZW-00-0000-0B0HT627F XMLEZW-00-0000-0B0HT627H XMLEZW-00-0000-
0B0HT630F XMLEZW-00-0000-0B0HT630H XMLEZW-00-0000-0B0HT635F XMLEZW-00-0000-0B0HT635H
XMLEZW-00-0000-0B0HT640F XMLEZW-00-0000-0B0HT640H XMLEZW-00-0000-0B0HU227F XMLEZW-00-0000-
0B0HU227H XMLEZW-00-0000-0B0HU230F XMLEZW-00-0000-0B0HU230H XMLEZW-00-0000-0B0HU235F
XMLEZW-00-0000-0B0HU235H XMLEZW-00-0000-0B0HU240F XMLEZW-00-0000-0B0HU240H XMLEZW-00-0000-
0B0HU330F XMLEZW-00-0000-0B0HU330H XMLEZW-00-0000-0B0HU335F XMLEZW-00-0000-0B0HU335H
XMLEZW-00-0000-0B0HU340F XMLEZW-00-0000-0B0HU340H XMLEZW-00-0000-0B0PT227F XMLEZW-00-0000-
0B0PT227H XMLEZW-00-0000-0B0PT327F XMLEZW-00-0000-0B0PT327H XMLEZW-00-0000-0B0PT330F
XMLEZW-00-0000-0B0PT330H XMLEZW-00-0000-0B0PT427F XMLEZW-00-0000-0B0PT427H XMLEZW-00-0000-
0B0PT430F XMLEZW-00-0000-0B0PT430H XMLEZW-00-0000-0B0PT527F XMLEZW-00-0000-0B0PT527H
XMLEZW-00-0000-0B0PT530F XMLEZW-00-0000-0B0PT530H XMLEZW-00-0000-0B0PT630F XMLEZW-00-0000-
0B0PT630H XMLEZW-00-0000-0B0US627F XMLEZW-00-0000-0B0US627H XMLEZW-00-0000-0B0UT227F
XMLEZW-00-0000-0B0UT227H XMLEZW-00-0000-0B0UT230F XMLEZW-00-0000-0B0UT230H XMLEZW-00-0000-
0B0UT327F XMLEZW-00-0000-0B0UT327H XMLEZW-00-0000-0B0UT330F XMLEZW-00-0000-0B0UT330H
XMLEZW-00-0000-0B0UT427F XMLEZW-00-0000-0B0UT427H XMLEZW-00-0000-0B0UT430F XMLEZW-00-0000-
0B0UT430H XMLEZW-00-0000-0B0UT530F XMLEZW-00-0000-0B0UT530H XMLEZW-00-0000-0D00T427F
XMLEZW-00-0000-0D00T427H XMLEZW-00-0000-0D00T527F XMLEZW-00-0000-0D00T527H XMLEZW-00-0000-
0D00T530F XMLEZW-00-0000-0D00T530H XMLEZW-00-0000-0D00T627F XMLEZW-00-0000-0D00T627H
XMLEZW-00-0000-0D00T630F XMLEZW-00-0000-0D00T630H