Instruction Leaflet IL 70-8749 Effective September 2013 Supersede September 2010 FAZ Lockoff for 1-3 Pole Supplementary Protectors Installation Instructions Step 1. (Figure 1) Lift lever and place lockoff bracket to right side of device. Step 2. (Figure 1) Position lockoff bracket over DIN-rail, with lockoff bracket foot aligned on either side of DIN-rail. Lever Screw Screwdriver Device Lockoff Bracket Step 3. (Figure 1) Insert the screw in the bracket hole aligned with circuit breaker bracket hole and tighten with a screwdriver. Step 4. (Figure 1) Insert lockoff bracket tab under right side of device while sliding along DIN-rail until stopping as shown in Figure 2. Step 5. (Figure 2) Close lever so padlock holes are aligned until stopping as shown in Figure 3. Step 6. (Figure 3) Insert padlock shank through padlock hole and lock when desired. DIN-Rail Right Side Lockoff Bracket Foot Lockoff Bracket Tab Figure 1. Lever Padlock Hole FAZ Lockoff for 1-3 Pole Supplementary Protectors FAZPLOFF DIN-Rail CAT. NO. FAZPLOFF QTY. 1 Figure 2. Padlock Hole Figure 3. Instruction Leaflet IL 70-8749 Effective September 2013 FAZ Lockoff for 1-3 Pole Supplementary Protectors This instruction leaflet is published solely for information purposes and should not be considered all-inclusive. If further information is required, you should consult an authorized Eaton sales representative. The sale of the product shown in this literature is subject to the terms and conditions outlined in appropriate Eaton selling policies or other contractual agreement between the parties. This literature is not intended to and does not enlarge or add to any such contract. The sole source governing the rights and remedies of any purchaser of this equipment is the contract between the purchaser and Eaton. NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OR WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE, ARE MADE REGARDING THE INFORMATION, RECOMMENDATIONS, AND DESCRIPTIONS CONTAINED HEREIN. In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or otherwise for any special, indirect, incidental or consequential damage or loss whatsoever, including but not limited to damage or loss of use of equipment, plant or power system, cost of capital, loss of power, additional expenses in the use of existing power facilities, or claims against the purchaser or user by its customers resulting from the use of the information, recommendations and description contained herein. Electrical Sector 1000 Eaton Boulevard Cleveland, OH 44122 USA United States 877-ETN-CARE (877-386-2273) Eaton.com (c) 2013 Eaton Corporation All Rights Reserved Printed in USA Publication No. IL 70-8749 / 002 September 2013 Eaton is a registered trademark of Eaton Corporation. All other trademarks are property of their respective owners.