MX1PMT4107D - Microsemi Corp. - Datasheet.Directory

POWERMITE

Low Noise 1 Watt Zener Diodes

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 1

5-06-2005 REV G

WWW.Microsemi .COM

SCOTTSDALE DIVISION

1PMT4614e3 thru 1PMT4627e3,

1PMT4099e3 thru 1PMT4135e3

1PMT4614-27 &

1PMT4099-4135

DESCRIPTION APPEARANCE

This Microsemi Powermite® surface mount low noise Zener package series

provides a higher power handling capability that are also RoHS compliant.

In addition to its size advantages, Powermite® package features include a

full-metallic bottom that eliminates the possibility of solder flux entrapment

during assembly, and a unique locking tab acts as an efficient heat path

from die to mounting plane for external heat sinking with very low thermal

resistance junction to case (bottom). Its innovative design makes this

device ideal for use with automatic insertion equipment.

DO-216

IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com

FEATURES APPLICATIONS / BENEFITS

• Surface mount equivalent to JEDEC registered

1N4099 thru 1N4135 and 1N4614 thru 1N4627

series except with additional power capability

• RoHS compliant

• Options for screening in accordance with Mil-PRF-

19500/435 for JAN, JANTX, JANTXV and JANS are

available by adding MQ, MX, MV, or MSP prefixes

respectively to part numbers. For example,

designate MX1PMT4099 for a JANTX (consult factory

for Tin-Lead plating if required).

• Optional 100% avionics screening available by

adding MA prefix for 100% temperature cycle,

thermal impedance, and 24 hour HTRB testing

(consult factory for Tin-Lead plating if req uire d).

• Extensive selection from 1.8 to 100 V

• Regulates voltage over a broad operating current

and temperature range

• Low noise density (1-3 kHz) at test current

Low reverse leakage current

• Tight tolerances available in plus or minus 2% or 1%

with C or D suffix respectively

• Hermetically sealed surface mount package

• Nonsensitive to ESD per MIL-STD-750 Method 1020

• Compatible with automatic insertion equipment

• Full metallic bottom eliminates flux e ntrapment

MAXIMUM RATINGS MECHANICAL AND PACKAGING

• Operating and Storage T emperatures: -55°C to +150°C

• Steady-State Power: 1.0 watt at TC < 120oC where

TC is case bottom temperature at mounting plane, or

0.5 watts at TA = 30ºC (ambient temperature) when

mounted on FR4 PC board as described for thermal

resistance (also see po wer deratings in Figure 1)

• Thermal Resistance: 30°C/W juncti on to case

(bottom) and 240°C/W junction to ambient on FR4

PC board (1 oz copper) with recommende d footprint

(see last page)

• Forward voltage: 1.1 Volts @ 200 mA

• Solder Temperatures: 260°C for 10 s (max)

• CASE: Void-free transfer molded thermosetting epo xy

compound meeting UL94V-0

• FINISH: Annealed matte-Tin plating over copper and

readily solderable p er MIL-ST D-750 method 2026

(consult factory for Tin-Lead plating)

• POLARITY: Cathode designated by Tab 1 (bottom)

• MARKING: Three numerical digits of P/N and a dot

(see next page listing)

• WEIGHT: 0.016 grams (approx.)

• Package dimensions on last page

• Tape & Reel option: Standard per EIA-481-B

3000 on 7 inch reel and 12,000 on 13” reel

POWERMITE

Low Noise 1 Watt Zener Diodes

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 2

5-06-2005 REV G

WWW.Microsemi .COM

SCOTTSDALE DIVISION

1PMT4614e3 thru 1PMT4627e3,

1PMT4099e3 thru 1PMT4135e3

1PMT4614-27 &

1PMT4099-4135

ELECTRICAL CHARACTERISTICS @ 25°C

NOMINAL

ZENER

VOLTAGE

(1)

VZ @ IZT

ZENER

TEST

CURRENT

IZT

MAXIMUM

ZENER

IMPEDANCE

(2)

ZZT

MAXIMUM

REVERSE

CURRENT

IR @ VR

MAXIMUM

NOISE

DENSITY

ND @ IZT

MAXIMUM

ZENER

CURRENT

(3)

IZM

TYPICAL

TEMPERATURE

COEFFICIENT

OF ZENER

VOLTAGE

αVZ

MICROSEMI

PART

NUMBER

DEVICE

MARKING

VOLTS μA OHMS μA VOLTS μV/√HZ mA %/°C

1PMT4614 614• 1.8 250 1200 7.5 1.0 1 262.4 -0.075

1PMT4615 615• 2.0 250 1250 5.0 1.0 1 240.6 -0.075

1PMT4616 616• 2.2 250 1300 4.0 1.0 1 218.7 -0.075

1PMT4617 617• 2.4 250 1400 2.0 1.0 1 207.8 -0.075

1MPT4618 618• 2.7 250 1500 1.0 1.0 1 196.8 -0.075

1PMT4619 619• 3.0 250 1600 0.8 1.0 1 190.3 -0.075

1PMT4620 620• 3.3 250 1650 7.5 1.5 1 185.9 -0.075

1PMT4621 621• 3.6 250 1700 7.5 2.0 1 181.5 -0.065

1PMT4622 622• 3.9 250 1650 5.0 2.0 1 174.9 -0.060

1PMT4623 623• 4.3 250 1600 4.0 2.0 1 168.4 -0.050

1PMT4624 624• 4.7 250 1550 10 3.0 1 164.0 -0.040 +0.020

1PMT4625 625• 5.1 250 1500 10 3.0 2 153.1 -0.045 +0.030

1PMT4626 626• 5.6 250 1400 10 4.0 4 142.2 -0.020 +0.040

1PMT4627 627• 6.2 250 1200 10 5.0 5 133.4 -0.010 +0.050

1PMT4099 099• 6.8 250 200 10 5.17 40 122.5 0.040

1PMT4100 100• 7.5 250 200 10 5.70 40 111.5 0.045

1PMT4101 101• 8.2 250 200 1.0 6.24 40 100.6 0.048

1PMT4102 102• 8.7 250 200 1.0 6.61 40 96.2 0.049

1PMT4103 103• 9.1 250 200 1.0 6.92 40 91.9 0.050

1PMT4104 104• 10 250 200 1.0 7.60 40 83.1 0.055

1PMT4105 105• 11 250 200 .05 8.44 40 76.5 0.060

1PMT4106 106• 12 250 200 .05 9.12 40 69.9 0.065

1PMT4107 107• 13 250 200 .05 9.87 40 63.4 0.065

1PMT4108 108• 14 250 200 .05 10.65 40 59.0 0.070

1PMT4109 109• 15 250 100 .05 11.40 40 54.8 0.070

1PMT4110 110• 16 250 100 .05 12.15 40 52.5 0.070

1PMT4111 111• 17 250 100 .05 12.92 40 48.1 0.075

1PMT4112 112• 18 250 100 .05 13.37 40 45.9 0.075

1PMT4113 113• 19 250 150 .05 14.44 40 43.7 0.075

1PMT4114 114• 20 250 150 .01 15.20 40 41.6 0.075

1PMT4115 115• 22 250 150 .01 16.72 40 37.2 0.080

1PMT4116 116• 24 250 150 .01 18.25 40 34.9 0.080

1PMT4117 117• 25 250 150 .01 19.00 40 32.8 0.080

1PMT4118 118• 27 250 150 .01 20.45 40 30.6 0.085

1PMT4119 119• 28 250 200 .01 21.28 40 30.6 0.085

1PMT4120 120• 30 250 200 .01 22.80 40 28.4 0.085

1PMT4121 121• 33 250 200 .01 25.08 40 26.2 0.085

1PMT4122 122• 36 250 200 .01 27.38 40 24.0 0.090

1PMT4123 123• 39 250 200 .01 29.65 40 21.4 0.090

1PMT4124 124• 43 250 250 .01 32.65 40 19.5 0.090

1PMT4125 125• 47 250 250 .01 35.75 40 17.7 0.090

1PMT4126 126• 51 250 300 .01 38.76 40 16.4 0.090

1PMT4127 127• 56 250 300 .01 42.60 40 14.7 0.090

1PMT4128 128• 60 250 400 .01 45.60 40 13.9 0.090

1PMT4129 129• 62 250 500 .01 47.10 40 13.3 0.090

1PMT4130 130• 68 250 700 .01 51.68 40 12.2 0.095

1PMT4131 131• 75 250 700 .01 57.00 40 11.2 0.095

1PMT4132 132• 82 250 800 .01 62.32 40 10.1 0.095

1PMT4133 133• 87 250 1000 .01 66.12 40 9.6 0.095

1PMT4134 134• 91 250 1200 .01 69.16 40 9.2 0.095

1PMT4135 135• 100 250 1500 .01 76.00 40 8.3 0.095

NOTE 1: Product shown has a standard tolerance of ±5% on the nominal zener voltage. Also available in 2% and 1% tolerance with

suffix C and D respectively. VZ is measured at IZT with Tc (TAB 1) at 30°C.

NOTE 2: Zener impedance is derived by superimposing on IZT a 60 Hz rms ac current equal to 10% of IZT (25 μA ac).

NOTE 3: Based on 1 W maximum power dissipation before any derating. Allowance has been made for higher voltage with operation at

higher currents and temperature. For determination of voltage change with current deviations from IZT see Micro Note 202

POWERMITE

Low Noise 1 Watt Zener Diodes

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 3

5-06-2005 REV G

WWW.Microsemi .COM

SCOTTSDALE DIVISION

1PMT4614e3 thru 1PMT4627e3,

1PMT4099e3 thru 1PMT4135e3

1PMT4614-27 &

1PMT4099-4135

GRAPHS AND TEST CIRCUIT

Temperature (oC)

FIGURE 1 NOISE TEST CIRCUIT

Power Derating Curve Where TC is case (bottom) temperature FIGURE 2

and TA is Ambient Temperature on FR4 PC board

FIGURE 3

POWERMITE

Low Noise 1 Watt Zener Diodes

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 4

5-06-2005 REV G

WWW.Microsemi .COM

SCOTTSDALE DIVISION

1PMT4614e3 thru 1PMT4627e3,

1PMT4099e3 thru 1PMT4135e3

1PMT4614-27 &

1PMT4099-4135

PACKAGE DIMENSIO NS & PAD LAYOU T

All dimensions +/-.005 inches MOUNTING PAD in inches