Input Voltage Derating (Ta=25°C)
125
75
50
25
0
100
Input Voltage (VAC)
115 264
Output Power (%)
90 230
LIGHTLINE
AC/DC-Converter
with 5 year Warranty
RACD60
60 Watt PFC
Single Output
●60W Class II AC-DC LED Power Supply
●Constant Current Operation
●Power Factor Corrected
●Universal Input Voltage Range
●User Adjustable Current Limit (/OF)
●Thermal Feedback Dimming (/TOF)
●Waterproof Enclosure (/IP67)
●cUL/UL8750 Certified, CE Marked
●Class 2 Power Unit UL1310
●High Efficiency
●Long 5 Year Warranty
Features
LED DRIVER
Selection Guide
Part Output Output Factory Set Efficiency Output
Number Voltage Range Current Range Current (230VAC) Power
(min - max)** (min - max) Limit Typ. Range
RACD60-700* 38 - 54V 700 - 1100mA 0.7A 89% 27-60W
RACD60-1050* 38 - 54V 700 - 1100mA 1.0A 89% 27-60W
RACD60-1400* 21 - 28V 1400 - 2140mA 1.4A 89% 30-60W
RACD60-2100* 21 - 28V 1400 - 2140mA 2.1A 89% 30-60W
RACD60-2400* 17 - 24V 2150 - 2500mA 2.4A 87% 30-60W
RACD60-4200* 11 - 13.5V 3570 - 4200mA 4.2A 85% 40-60W
* use suffix /OF for open frame version (standard) - output current limit adjustable with on-board trimmer
* use suffix /TOF for open frame version with thermal feedback - output current limit externally adjustable.
* use suffix /IP67 for waterproof potted version - fixed output currents only
** adjustable output current range at potentiometer (only /OF types)
Input Voltage Range All Versions 90-264VAC
Rated Power 60 Watts max.
Input Frequency Range All Versions 50/60 Hz
Power Factor Correction Full Load, 115VAC/230VAC > 0.9
THD Full Load, 115VAC 17% max.
Full Load, 230VAC 20% max.
Input Current (full load) 115VAC/230VAC 0.8A / 0.4A max.
Inrush Current (cold start) 115VAC/230VAC 25A / 50A max.
Leakage Current 230VAC/63Hz <0.7mA max.
Input Fuse Built-in 3.15A Slow Blow
Output Current Accuracy Full load ±5%
Output Current Adjust Preset Potentiometer (/OF) 75% to 100% approx.
External Voltage (/TOF)
Line Voltage Regulation LL to HL at Full Load ±4% typ.
Load Voltage Regulation 60% to 100% Load ±5% typ.
Minimum Load Current see table
Operating Frequency All Versions 65kHz typ.
continued on next Page
Description
Specifications (typical at 25°C and after warm up time unless otherwise specified )
The RACD60 is a compact universal input voltage 60W constant current power module suitable for driving high power LEDs.
The RACD60 series have active power factor correction, universal input voltage range and are fully protected against
output short circuit, overload and over-temperature. Three versions are available: a low cost open-frame with either internal
(/OF) or external user-adjustable current limit (/TOF), and a sealed IP67 potted version (/IP67) with factory set output
currents for outdoor or high humidity applications. The LED driver is a class II power supply with CSA, UL and CE
certifications and comes with a five year warranty.
UL 8750 Certified
cUL 8750 Certified*
EN 61347 Certified
E340696
ordering examples:
RACD60-700/OF= open frame, adustable current limit preset to 700mA.
RACD60-1050/TOF=open frame,1050mA, adjustable 700-1050mA with ext. voltage or PWM signal.
RACD60-1400/IP67 = enclosed IP67 waterproof, non-adjustable 1400mA output.
Note: all currents within range are available - use RACD60-xxxx/IP67 where xxxx is the desired fixed current
e.g. RACD60-900/IP67 = enclosed IP67 waterproof, non-adjustable 900mA output.* except 700mA/1100mA Versions
RoHS
2011/65/EU
6/6
Note:
All LED Drivers may not be used without a
load. They must be switched on the primary
side only. Noncompliance may damage the
LED or reduce its lifetime.
Refer to Application Notes
L-50 www.recom-power.comREV: 0/2015
L
Select R1/RT so that thermal derating
starts at around 75°C, e.g. for RACD60-
1050 with 15 LEDS and a 100k (@25°C)
thermistor: R1=33k.
RACD60-xxxx/TOF
N
R11st LED
Last LED
+Vout
Dim
FG -Com
RT
NTC
SIMPLE THERMAL FEEDBACK DIMMING CIRCUIT
thermal
contact
10V
100%
25 35 45 55 65 75 85 95 105
Thermistor Temperature (°C)
50%
LED Current
RACD60
RACD60
Series
LIGHTLINE
AC/DC-Converter
Efficiency at Full Load see Selection Guide
Isolation Voltage (60Hz RMS) input to output 3.75kVAC / 1 minute
input to filter ground 1880VAC / 1 minute
output to filter ground 500VAC / 1 minute
Temperature Coefficient All Versions ±0.02%/°C typ.
Overload Protection All Versions 105% typ.
Short Circuit Protection Continuous, Hiccup, Automatic Restart
Open Circuit Output Voltage 4200mA 19VDC
(Zener Diode Clamp) 2400mA 25VDC
Typical Values 2100mA/1400mA 29VDC
1050mA/700mA 55VDC
Output Current Adjust (/TOF only) External Voltage (1-10V) 10.5V max.
External PWM (10V) 300Hz max.
Operating Temperature Range free air convection, with derating -30°C to +70°C
(refer to derating graphs) Case temperature (/IP67) 85°C max.
Storage Temperature Range -40°C to +85°C
Humidity non-condensing 95% RH max.
Environmental Protection Open Frame (/OF, /TOF) Indoor Use Only
Potted Version (/IP67) IP67
PCB Material Plastic Resin with Fibreglass (UL94V-0)
Weight Open Frame (/OF, /TOF) 165g
Potted Version (/IP67) 200g
Packing Quantity 1pc
EMC EN 55015, EN61347-1, EN61347-2-13
Harmonics Certified to meet EN 61000-3-2 (Class C, Full load) and EN 61000-3-3
MTBF (using MIL-HDBK-217F, 25°C) 583 x 10³ hours
Safety Standards LED Lighting Safety Report: E34696 UL8750
LED Lighting Safety (Canada) Report: E34696 cUL8750
Class 2 Power Supply Safety Report: E34696 UL1310
Extra Low-Voltage Class 2 Output Report: E34696 CSA C22.2 No. 223-M91
LED equipment for lighting application Report: E34696 CSA C22.2 No. 250.13-12
CE LVD Directive -all models EN61347
Input/Output Connections /OF Pin Header (suitable matching connector JST VHR or similar) . /IP67
340mm Cable ± 20mm
Specifications (typical at 25°C and after warm up time unless otherwise specified )
/TOF Output Current Adjustment
Normalised Output current (%)
1.0
2
Input Voltage (V) or PWM Duty Cycle (%)
0.75
010
0.5
RACD60-4200/TOF
468
20%
0% 100%
40% 60% 80%
RACD60-2400/TOF
RACD60-1400/TOF
RACD60-1100/TOF
The /TOF offers the possibility to derate the output current
with an external voltage or PWM signal.
Thermal feedback derating is an effective way to reduce the
LED current at high temperatures to avoid over-stressing
the LED.
www.recom-power.com L-51REV: 0/2015
RACD60
Series
LIGHTLINE
AC/DC-Converter
28.0
101.6
50.8
95.3
45
Use M3 Mounting Screws
Current
Limit
1
23
4
FG
5
FG
FG
CN1 CN2
25.5
28.0
Ø3,1mm
RACD60-xxxx/OF and RACD60-xxxx/TOF
110
300mm
Cable
300mm
Cable
124.5
118 35
60
use M3
or 3 x 30
fixing screws
2
40
5
Tc 11
38
Wire Connections
Wire Function
Brown VAC in (L)
Blue VAC in (N)
Red +VDC Out
Black -VDC Out
Dimension Tolerance ± 0.25 mm
RACD60-xxxx/IP67
Typical Characteristicsv
Package Style and Pinning
Pin Connections
Pin # /OF /TOF
1 VAC in (L) VAC in (L)
2 VAC in (N) VAC in (N)
3 NC Thermal feedback
4 +VDC Out +VDC Out
5 -VDC Out Com
Filter Ground connection via mounting holes
Dimension Tolerance ± 0.25 mm
Package Style and Pinning
L-52 www.recom-power.comREV: 0/2015
Maximum Number of LED drivers per circuit breakers
Condition Circuit Breaker Circuit Breaker Current
Typ 10A 16A 20A 25A
115VAC, 1Ohm
90° phase angle C12 20 24 31
230VAC, 1Ohm
90° phase angle
B13 21 25 32
C21 35 41 51
277VAC, 1Ohm
90° phase angle
B15 24 29 37
C24 40 47 58
LIGHTLINE
AC/DC-Converter
RACD60
Series
Application Information
LEDs are typically wired in series to make a string of LEDs and then the strings can be wired in parallel to generate enough light. If only two or
three strings are wired in parallel then it is recommended to add resistors (e.g. 0.5R) to each string to help balance out the LED currents in each
string. All strings must share a common heatsink for better current matching.
1st LED Last LED
1st LED Last LED
1st LED Last LED
String 1
String 2
String n
A typical 1W high brightness white LED has a forward voltage of around 3.3V at its operating temperature and draws 350mA. Thus each LED
actually draws about 1.15W. Similarly, 3W white LEDs have usually the same forward voltage but can be run at 700mA or more. Using the LED
datasheet specification, the optimum LED arrangement and the best driver for each application can be worked out.
The tables below show some examples.Other LED combinations may have different forward voltages at their recommended operating currents.
1W LEDS LED Arrangement AC/DC Driver
24 2 Strings of 12 RACD60-700
26 2 Strings of 13 RACD60-700
28 4 Strings of 7 RACD60-1400
30 3 Strings of 10 RACD60-1050
33 3 Strings of 11 RACD60-1050
35 5 Strings of 7 RACD60-2100
35 7 Strings of 5 RACD60-2400
36 3 Strings of 12 RACD60-1050
39 3 Strings of 13 RACD60-1050
42 3 Strings of 14 RACD60-1050
42 7 Strings of 6 RACD60-2400
42 14 Strings of 3 RACD60-4200
45 3 Strings of 15 RACD60-1050
3W LEDS LED Arrangement AC/DC Driver
12 12 in series RACD60-700
14 2 Strings of 7 RACD60-1400
18 3 Strings of 6 RACD60-2100
18 6 Strings of 3 RACD60-4200
High Power LEDs LED Arrangement AC/DC Driver
Cree CXA2011 Single Array RACD60-1050
Cree XM-L 6 in series RACD60-2100
Lumiled Rebel 13 in series RACD60-700
Osram Dragon 14 in series RACD60-1050
Bridgelux RS Single Array RACD60-2100
Helieon Single Module RACD60-1400
Derating Graphs
125
75
50
25
0
100
Ambient Temperature Range (°C)
060
70 80 90
Output Power (%)
Natural Convection
50
-30
4.2A
All others
40
RACD60
-xxxx/IP67
RACD60 RACD60
-xxxx/OF -xxxx/TOF
RACD60
www.recom-power.com L-53REV: 0/2015
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit
written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
RECOM:
RACD60-1050/IP67 RACD60-1400/IP67 RACD60-2100/IP67 RACD60-2400/IP67 RACD60-2400/OF RACD60-
4200/IP67 RACD60-700/IP67 RACD60-1050/OF RACD60-2100/OF RACD60-4200/OF RACD60-700/OF RACD60-
1400/OF RACD60-4200/TOF RACD60-2400/TOF RACD60-2100/TOF RACD60-1050/TOF