Specialty Tools Plumb Bobs Pin Vises Retrieving Tools Tweezers Holding Tools Calipers Micrometers Meters Magnifiers Inspection Mirrors Magnetic Tools Sweepers Magnets Knives Carving Tools Grommets, Fasteners Punches Pliers File Sets Probe Sets Levels SPECIALTY TOOLS Measure 'N Mark /Plumb Bobs The New "Measure 'N Mark" is a pocket pen with a 3 foot removable tape measure. A handy little pen tool for those on the go. A Plumb Bob is a pointed, tapered brass or steel weight which is suspended from a cord for determining the vertical or plumb line to a point on the ground. General's Plumb Bobs are available in a wide range of sizes and conform to government specifications. 309 POCKET PEN WITH REMOVABLE TAPE MEASURE * 3' (914mm) removable tape measure * Pen with comfort grip * Convenient pocket clip * Great for high-traffic areas like checkout counters and end-cap shelving * Available only as a 15 piece counter display UPC NO. 02126 8 309CD Countertop Display 15 pieces (Sold only as a counter display see Page T-117 for display) 309CD Patent Pending BRASS PLUMB BOBS * Machined of solid brass, fully polished and lacquered * Removable self-centering cord cap for easy cord replacement. Cap used with 5/64" (0.078) braided cord * Replaceable hardened steel point * Conforms to government specs GGG-P-501e * Now with extra string and tip * 10' (3mm) long braided cord * Available in six sizes SPECIALTY 800 B UPC NO. 42624 6 42630 7 42633 8 42639 0 42641 3 800-8 8 oz. 4-1/2" (114mm) 800-12 12 oz. 5" (127mm) 800-16 16 oz. 5-3/4" (146mm) 800-32 32 oz. 7-1/4" (184mm) 800NP Replacement Point 10-33 Thread WEIGHT (A) (B) 1-3/16" (30mm) 1-3/8" (35mm) 1-1/2" (38mm) 1-7/8" (48mm) A HEXAGON STEEL PLUMB BOBS * Made of hexagonal cold drawn steel and nickel plated to prevent rust * Removable cord cap for 3/32" (0.094) * 10' (3mm) long braided cord 790 T-80 B A UPC NO. WEIGHT (A) (B) 42612 3 42615 4 42618 5 790-5 790-8 790-12 5 oz. 8 oz. 12 oz. 3-3/8" (86mm) 4" (102mm) 4-1/2" (114mm) 3/4" (19mm) 7/8" (22mm) 1" (25mm) Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Pin Vises General's Pin Vises are useful for securely holding small stock, taps, drills, reamers, scribers, wire, files and other tools. The tool steel collets are hardened SINGLE END PIN VISE SET * For holding small rods, wire, drills, taps and other small tools * Tool steel collets are hardened and grip firmly when screw chuck is tightened and grip firmly when the screw chuck is tightened. The Swivel Head Pin Vise is an exceptional tool for precise work on models, instuments and jewelry. * Nickel plated body is hollow to permit holding of long rods of wire * Available in individual sizes * Conforms to government specfications GGG-V-412a 94A S94 94B 94C UPC NO. RANGE (A) (B) (C) 41068 9 41074 0 41077 1 41080 1 41083 2 S94 94A 94B 94C 94D Set of 4 sizes, A-D 0 to 0.055" (0 to 1.4mm) 0.025 to 0.075" (.6 to 1.9mm) 0.045 to 0.125" (1.1 to 3.2mm) 0.110 to 0.187" (2.8 to 4.8mm) 3-1/8" (79mm) 3-1/2" (89mm) 3-13/16" (97mm) 4" (102mm) 5/16" (8mm) 3/8" (10mm) 7/16" (11mm) 9/16" (14mm) 3/16" (5mm) 1/4" (6mm) 1/4" (6mm) 5/16" (8mm) 94D C B A SWIVEL HEAD PIN VISE * An exceptional pin vise for precise work UPC NO. CAPACITY on models, instruments and jewelry * Two double end collets made of hardened tool steel * Has large freewheeling swivel head * Collets stored in handle 41062 7 92 0.0 to 0.125" 0.0 to 3.2mm 5/16" (8mm) 3/8" (10mm) 92 3-11/16" (94mm) DOUBLE END PIN VISE * Each end has a double end collet which may be reversed to desired size * Nickel plated body is hollow to permit use of long wire or rods * Collets stored in handle * Holds a variety of small tools for fine detail work UPC NO. CAPACITY 41058 0 90 0.0 to 0.0125" 0.0 to 3.2mm ADJUSTABLE PIN VISE UPC NO. CAPACITY 41065 8 93 0.040 to 0.250" 1mm to 6.4mm * Use for electronic assembling, tool-making, model making and hobbies * Holds small drills, deburrers, wires, files, reamers and other small tools * 3-jaw hardened steel keyless chuck and sturdy plastic handle 3/8" (10mm) 7/16" (11mm) 90 3-5/8" (92mm) 1" (25mm) 93 5-3/4" (146mm) * This popular vise grips firmly to glass, metal, laminate, fiberglass, or any smooth nonporous surface with quick lever action * Universal ball joint swivels 360 to any position and tilts 90 to any angle * V-grooved hardened steel jaws are 3" wide and open to 2-5/8" ADJUSTABLE FILE/TOOL HANDLE * For holding files, reamers, hacksaw blades and other tang handled tools * Exclusive steel parallel clamping jaws grip the entire length of the inserted tang to prevent slipping * Large, quick adjusting knurled knob ensures positive locking * Rustproof handle with steel parts * Furnished with slide-on rubber jaws for fragile work * Folds for storage UPC NO. SIZE 43960 4 1850 6-1/4" triangular BASE HEIGHT OVERALL WEIGHT 6-1/4" 5 lbs. 1850 * Conforms to government specifications NN-H-0085 UPC NO. 43666 5 890 1-1/16" (27mm) 890 4-1/8" (105mm) "It's Your Job . . . General Tools Make It Easier" T-81 SPECIALTY SWIVEL VACUUM VISE SPECIALTY TOOLS Mechanical Pick-Ups The new Lighted Mechanical Pick-Ups allow you to retrieve items from dark, hard to reach places. The powerful LED light sheds a beam of light on your subject. The strong 4-prong steel jaws allows you to retrieve small items. The shaft comes in 3 different lengths, 12", 24", and 36". LIGHTED MECHANICAL PICK-UPS * Strong spring steel retrieval claw * Power Source: 3 "LR41" batteries (included) * Retrieve items from dark/hard-to-reach places * Push On Powerful LED light * Continued push opens retrieval claw * Comfortable ergonomically designed hand controls * Flexible shaft UPC NO. 70399 6 26003 1 70393 4 70393 12" OAL 70396 24" OAL 70399 36" OAL LR41 replacement battery 70399 70396 70393 MINI MECHANICAL PICKUP * Strong four prong steel jaws retrieve small objects up to 1/2" (12mm) * Knurled body with tapered point for hard-toreach work areas * Smooth traveling plunger actuator for greater control * Chrome finish to prevent rust * Can be used as a screw starter 388 UPC NO. 42214 9 388 9/32" (7mm) 4-1/2" (114mm) 1/2" (12mm) 9/32" (7mm) 4-1/2" (114mm) SPECIALTY MECHANICAL PICKUP * Strong four prong steel jaws retrieve small items from hard-to-reach places * Smooth actuator for greater control 396 * Chrome finish to prevent rust * Flexible shaft to avoid obstacles UPC NO. 22145 2 396 24" (610mm) TELESCOPING ALLIGATOR CLIP 400 * Ideal for lighting pilot lights and barbeques * Jaw capacity: .170" (4.30mm) * Chrome finish to prevent rust * Convenient pocket-clip 5/16" (8mm) 6-1/4" (159mm) Closed 24-1/2" (622mm) Extended T-82 UPC NO. 42217 0 400 Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Tweezers Utility Tweezers are used by mechanics, craftspeople and hobbyists where value is desired. The Nut Starter and Screw Starters are used for starting and removing nuts and screws in hard-to-reach places. They can also be used when nuts and screws are too small to be held by hand while being threaded. UTILITY TWEEZERS. Utility tweezers for mechanics, craftspeople and hobbyists INDIVIDUAL STYLES OF UTILITY TWEEZERS UPC NO. POINT STYLE LENGTH 42291 0 414 6-1/2" 414 42294 1 42297 2 415 416 Blunt serrated (self closing) Curved Spade 6-1/2" 4-1/2" 415 416 SWISS PATTERN TWEEZERS * Light tension and hardened points for subminiature assemblies * Stainless steel construction * Finest quality precision points UPC NO. 42249 1 42251 4 423-3 423-3C POINT STYLE LENGTH Very fine Very fine 4-5/8" 4-1/8" 423-3 423-3C SIX-PIECE TWEEZER SET * Consists of six tweezers for home and industrial use * One each of Nos. 401XX, 403, 412, 414, 415, 417 * In clear vinyl pouch UPC NO. 42309 2 C421 C421 TWEEZER MAGNIFIER * Useful for detailed projects * 5-power lens * Stainless steel tweezer * Double hinged adjustable arm * Durable plastic handle and frame * Finely ground points * Length 2-1/4" (57mm) UPC NO. 42258 3 425 425 NUT STARTER * Knurled aluminum handle UPC NO. 42682 6 8081 5/16" (8mm) 5" (127mm) 8081 SLOTTED SCREW STARTER * For starting or removing slotted screws in hard-to-reach areas. Can also be used when screws are too small to be held by hand while being threaded * Spring loaded steel chuck holds slotted screws from No. 3 to 7/16" sizes 5/16" (8mm) * Knurled aluminum handle UPC NO. 42684 0 8082 5-1/8" (130mm) 8082 CROSS POINT SCREW STARTER * For starting or removing cross point screws in hard-to-reach areas. Can also be used when screws are too small to be held by hand while being threaded * Easy-to-use spring steel chuck holds screws from No. 6 to 1/4" size SPECIALTY * For starting or removing threaded nuts in hard-to-reach areas. Can also be used when nuts are too small to be held by hand while being threaded * Easy-to-use spring steel chuck will hold nut sizes from 3-48 thread (3/32" or 2.5mm) to 5/16" (8mm) 5/16" (8mm) * Knurled aluminum handle UPC NO. 42686 4 8083 "It's Your Job . . . General Tools Make It Easier" 5" (127mm) 8083 T-83 Shed Some Light On Your Subject Lighted Tweezers with Lighted Tweezers and Lighted Mechanical Pick-Up 1 Push On / Push Off Powerful LED Light 24" Lighted Mechanical Pick-up 1 2 Non-Slip Comfort Grips 3 3 2 3 Continued Push Opens Retrieval Claw 3 Comfortable Hand Controls 4 4 4 Corrosion Resistant Non-Glare Black Finish Corrosion Resistant Black Finish 5 5 5 FLEXI-SHAFT Lighted Mechanical Pick-Up No. 70393 12" (305 mm) No. 70396 24" (610 mm) No. 70399 36" (914 mm) TM Serrated Blunt Tips 6.25" (159mm) No. 70403 Serrated Bent Tips 6.5" (165mm) No. 70408 Smooth Pointed Tip 6.25" (159mm) No. 70401 2 2 Heat Treated Steel 4 1 1 Push On Powerful LED Light Bent Tip No. 70408 Pointed Tip No. 70401 FLEXISHAFT TM 5 Blunt Tip No. 70403 Includes 3 "LR41" batteries No. 70400 3 Piece Set 70401, 70403, 70408 No. 70402 2 Piece Set 70401, 70408 6 Strong Retrieval Claw Can Grasp Objects Up To 1" (52mm) Includes 3 "LR41" batteries 6 T-84 SPECIALTY TOOLS Tweezers The new Lighted Tweezers allow you to retrieve items from dark, hard-to-reach places. The powerful LED light allows you to put the light exactly where you need it. Ideal for electronics, computer, instrument, radio and other small or sub-miniature assembly, servicing and repairs. Available in three tip configurations. LIGHTED TWEEZERS Now, put the light exactly where you need it! * Push ON/Push OFF powerful LED light * Non-slip comfort grip * Heat treated steel * Corrosion resistant non-glare black finish * Tweezers are approximately 6.25" (159mm) long * Sets come with heavy-duty Ballistic nylon carrying case * Power Source: 3 "LR41" batteries per tweezer (included) UPC NO. 26004 8 26005 5 26006 2 70402 3 70400 9 70401 70403 70408 70402 70400 Smooth Point Tip Serrated Blunt Tip Serrated Bent Tip (2 pc. set) 70401, 70408 (3 pc. set) 70401, 70403, 70408 70402 70401 Smooth Point Tip 70403 Serrated Blunt Tip 70408 70400 Serrated Bent Tip BOLEY PATTERN TWEEZER * A fine quality tweezer for jewelers, watchmakers, instrument assemblers and craftspeople * For radio, television and other repairs UPC NO. POINT STYLE LENGTH 42240 8 401AA Strong bevel 5" 401AA INDUSTRIAL TWEEZERS. General's quality tweezers for toolmakers, repairmen, electronic assemblers and other professionals INDIVIDUAL STYLES OF INDUSTRIAL TWEEZERS UPC NO. POINT STYLE LENGTH 42263 7 42266 8 42271 2 42280 4 401XX 403 408 410 Strong sharp Blunt serrated Sharp bent Narrow sharp 4-1/2" 6" 4-1/4" 4-1/4" 401XX 408 403 410 "It's Your Job . . . General Tools Make It Easier" T-85 SPECIALTY PRECISION TWEEZERS. For electronic, computer, instrument, radio and other small or subminiature assembly, servicing and repairs TM Light Weight Non-Marring Carbon Fiber Construction 3 Mode Digital Display Inches Metric Fractions 2 Sizes Now Available 3" (76mm) / 6" (150mm) 3" Fraction+ Caliper Clips into Your Pocket Convenient Auto On/Off Feature Specifications: Range: No. 1433 (3") 0 - 3" (0-76mm) No. 146 (6") 0 - 6" (0 - 150mm) No. 146 (6") No. 1433 (3") Accuracy: No. 1433 (3") +/- 0.005", +/- 0.1mm No. 146 (6") +/- 0.008", +/- 0.2mm Resolution: 0.0005" 0.01mm 1/64" Repeatability: 0.0005" 0.01mm 1/64" T-86 From the Hobbyist to the Technician and Measuring Everything in Between SPECIALTY TOOLS Fraction+ Calipers The Family 6", 8" & 12" STAINLESS STEEL 147 DIGITAL FRACTIONAL CALIPERS * 6" (153mm) range * Heavy-duty stainless steel construction * Convenient auto-off feature * Three mode digital display: Decimal Inches, Fractions, Metric * Inside, outside, depth & step measurements * Accuracy: +/- 0.001", +/- 0.02mm * Resolution: 0.0005", 0.01mm, 1/64" * Power Source: 1 "SR44" (1.5V) battery (included) UPC NO. 01470 2 01478 3 14712 7 147 0 - 6" (0 - 153mm) 1478 0 - 8" (0 - 203mm) 14712 0 - 12" (0 - 305mm) RANGE No. 147 Digital Display 6" CARBON FIBER DIGITAL FRACTIONAL CALIPER * 6" (153mm) range * Lightweight, non-marring carbon fiber composite * Convenient auto-off feature * Three mode digital display: Decimal Inches, Fractions, Metric * Inside, outside, depth & step measurements * Accuracy: +/- 0.008", +/- 0.2mm * Resolution: 0.0005", 0.01mm, 1/64" * Power Source: 1 "SR44" (1.5V) battery (included) UPC NO. 01460 3 146 0 - 6" (0 - 153mm) SR44 replacement battery 146 RANGE No. 146 Digital Display DIGITAL FRACTIONAL CALIPER * 3" (76mm) range * Lightweight non-marring carbon fiber composite * Convenient auto-off feature * Three mode digital display: Decimal Inches, Fractional and Metric * Convenient pocket clip * Inside, outside, depth & step measurements * Accuracy: +/- 0.005", +/- 0.1mm * Resolution: 0.0005", 0.01mm, 1/64" * Power Source: 1 "SR54" (1.5V) silver oxide battery (included) UPC NO. RANGE 01433 7 1433 0 - 3" (0 - 76mm) 1433 No. 1433 Digital Display "It's Your Job . . . General Tools Make It Easier" T-87 SPECIALTY 3" CARBON FIBER SPECIALTY TOOLS Dial Calipers General's high quality, easy-to-read Dial Calipers give precise readings - Inside, Outside, Depth and Step measurements. The 6" Plastic Dial Caliper is made of fiberglass reinforced plastic and gives precision measurements at an economical price. The 6" Dial Caliper is a stainless steel construction for greater accuracy and durability. 6" PLASTIC, DIRECT READING DIAL CALIPER * Fiberglass reinforced plastic gives precision measurements at an economical price * Measuring capacity 0 to 6" * Contrasting color coded dial is graduated in .01" and 64ths with inch and mm on bar scale * No-glare easy-to-read dial with adjustable bezel 142 * Inside, outside, depth and step measurements * Freewheeling friction roller for repetitive and accurate readings * Fractional conversion table on back UPC NO. 44145 4 142 6" DIAL CALIPER * Stainless steel construction for accuracy and durability * Large, clear dial accurately reads to .001" * Satin chrome scale with clearly etched tenths of inch graduations * Covered rack ensures smooth operation by preventing dirt and chips from entering rack and gear mechanism 107 * Inside, outside, depth and step measurement * Lock for repetitive measurement * Free wheeling thumb roller * Depth stop rod * Adjustable bezel for zero setting UPC NO. 10700 8 107 DIAL CALIPER AND MARKING SET * This set contains three of the most useful measuring and marking tools for mechanics and machinists * Set includes: 6" Dial Caliper; 6" x 3/4" Stainless Steel Rule with satin finish and reversible Tip Carbide Scriber with magnetic pick-up * Rule has etched and filled 4 graduations (1/8", 1/16", 1/32", 1/64") * Scriber has aluminum body with knurled handle with an overall length of 4-3/4" * Caliper has inside, outside, depth and step measurements * Caliper has lock for repetitive measurement * Caliper has free wheeling thumb roller * Packaged in a sturdy, fitted, plastic case designed specifically for this set 108 UPC NO. 10800 5 108 SPECIALTY 6" PLASTIC DIAL CALIPER, THOUSANDTHS READING, SINGLE REVOLUTION * Capacity 0 to 6" * Readings in .001" * Single revolution of dial is .100" * Resolution .001" * 6" scale is graduated in tenths/mm * Non-glare dial with adjustable bezel * Packed in reusable plastic hang-up case * Inside, outside, depth and step measurements * Freewheeling friction roller for repetitive and accurate readings UPC NO. 44150 8 145 145 PLASTIC, METRIC DIAL CALIPER * Capacity 0 to 150mm by 0.1mm * Accurately graduated dial has direct readings in metric 0.1mm * Complete with instructions and reusable plastic hang-up case * Inside, outside, depth and step measurements * Freewheeling friction roller for repetitive and accurate readings UPC NO. 44148 5 144MM 144MM T-88 Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Calipers/Micrometers Slide Calipers come in different styles - Electronic Digital Calipers, Mechanical Dial Calipers, Vernier Calipers and Plain Slide Calipers. General's all-purpose Slide Calipers, sized to slip into your pocket, can make quick, accurate, inside and outside diameter measurements. General's Utility Micrometer is a practical and economical measuring device for beginners as well as hobbyists. METRIC AND ENGLISH VERNIER CALIPER * Graduated in mm and 16ths of an inch with vernier reading of .1mm and 1/128" * Economical steel vernier calipers have 5" (125mm) capacity * Inside and outside jaws and full length depth gage * Caliper has inside, outside depth and step measurement * Caliper has lock for repetitive measurement * Friction roller adjustment * Slide lock for gaging UPC NO. 42577 5 722 722 4-INCH SLIDE CALIPERS * Stainless steel caliper with inside and outside readings in 16ths and 32nds * Decimal equivalents table on back * Scale has etched and filled graduations * 4" (102mm) capacity UPC NO. GRADS 42581 2 42594 2 729 729ME 16ths and 32nds mm and 16ths 729 POCKET CALIPER * Stainless steel slide caliper with inside and outside readings in metric and inches * Decimal equivalents on back * Scale has etched and filled graduations * 3" (76mm) capacity UPC NO. GRADS 44136 2 132ME 32nds and mm 132ME POCKET CALIPER UPC NO. GRADS 44139 3 141ME 32nds and mm 141ME UTILITY MICROMETER * A practical and economical measuring device for beginners and hobbyists * Well-suited for use in training programs, general toolroom and machine shop use and automotive work * Accuracy guaranteed to .001" * Special wrench is included for simple zero adjustments * Ground and polished carbide measuring faces * Engraved graduations on barrel * Lock for repetitive measurement UPC NO. RANGE INCLUDES 44103 4 102 0" to 1" "It's Your Job . . . General Tools Make It Easier" 102 T-89 SPECIALTY * Precision made high strength, fiberglass reinforced plastic caliper * Opens to 3" (76mm) outside measurement capacity * 4" (102mm) rule graduated in 16ths on back * Inside and outside readings graduated in 32nds and mm SPECIALTY TOOLS Measuring/Marking Kits The Precision Measuring Kit contains four of the most useful measuring and marking tools for mechanics and machinists: Micrometer, Dial Caliper, 6" Steel Rule and Carbide Scriber. The Marking Kit contains a 6" Steel Rule, Magnetic Pick-Up, Automatic Center Punch and Scriber. PRECISION MEASURING KIT * This kit contains four of the most useful measuring and marking tools for mechanics or machinists * Kit includes: No. 102, 0 to 1" micrometer; No. 145, 0 to 6" thousandths reading dial caliper; No. 676, 6" rigid stainless steel rule graduated in 8ths, 16ths, 32nds, and 64ths; No. 88CM, tungsten carbide scriber with magnetic pickup S004 * Packaged in sturdy, fitted, blow molded case designed specifically for these tools * Instructions and conversion table (fractions to decimals to millimeters) included UPC NO. 34106 8 S004 PLUNGER DIAL INDICATOR SPECIALTY 109 * Large 2-1/4" (57mm) diameter dial indicator * Accuracy to .001" * Dial is continuous and may be rotated for setting at any point * Full 1" travel * Revolution accumulator counter * Direct decimal two-way reading left and right * Adjustable limit indicators * Lug mount standard UPC NO. READINGS 10900 2 109 0 to .001" by .001" POCKET PROTECTOR TOOL/MARKING KIT * This handy pocket size tool kit is designed for the mechanic, machinist or hobbyist * The kit contains four of General's best selling tools: No. 300/1, 6" rule; No. 383NX, telescoping magnetic pickup; No. 87, automatic center punch and No. 88, scriber * All tools packaged in vinyl pocket protector which can be snapped closed T-90 UPC NO. KIT INCLUDES ONE EACH: 34112 9 S008 6" rule, magnetic pickup, automatic center punch, scriber Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Magnifiers General's NEW LumiLENSTM Lighted Magnifier puts the light directly on your subject to be viewed. With its powerful extra bright LED light you will never be left in the dark again. Two lens magnifications, * Hands-Free Use 3x and 6x, as well as an integrated stand for HandsFree use make this tool a must in laboratory quality control, inspection and assembly functions. * 3x Magnification, 6x Inset Lens * Extra-Bright LED LIGHTED MAGNIFIER 800543 * Push On / Push Off Powerful LED light * Contoured Handle for Handheld Use * Integrated Stand for Hands-Free Use * Shatter-Resistant Lens * 3-1/2" Lens Diameter (89mm) * 3X Magnification (6X Inset lens) * Power Source: 2 "AA" batteries (included) UPC NO. 26001 7 800543 4 POWER POCKET ILLUMINATED MAGNIFER UPC NO. POWER 42456 3 553 4 553 4" ILLUMINATED MAGNIFIER * 4" diameter with 3 power lens covers large areas of print * 5 power bifocal lens insert gives even greater magnification * Bulb gives wide circle of illumination * Plastic body and optical plastic lens * Power Source: 2 "C" batteries (included) UPC NO. 42462 4 554 Bifocal POWER FOCAL LENGTH 3.0 5.0 3-1/3" 2" "It's Your Job . . . General Tools Make It Easier" 554 T-91 SPECIALTY * Handy 4 power magnifier has plastic body and lens * Power Source: "AAA" batteries and No. 222 bulb (included) SPECIALTY TOOLS Magnifiers General's Magnifiers are used by toolmakers, jewelers, instrument assemblers, laboratory technicians, engineers, mechanics and inspectors who need sharp clear magnification without eyestrain. These magnifiers are designed for demanding jobs in laboratory quality control, inspections and assembly functions. The Illuminated Magnifiers are of the highest optical quality and offer fine resolution. ULTRATECHTM GLASS MAGNIFIERS * Polished optical glass lens with a metal frame * Versa-GripTM Handle with non-slip cushion grip * Full range of sizes from 2" (50mm) to 4-1/2" (115mm) * Round lens is distortion free * A powerful magnifier for working in confined or obstructed spaces * Designed for demanding jobs in laboratory quality control, inspection and assembly functions * Used by engineers, mechanics, inspectors, lab technicians, toolmakers, instrument assemblers, jewelers, do-it-yourselfers, hobby and crafts people 750545 UPC NO. DIAMETER 00540 3 50541 5 50542 2 50543 9 50544 6 50545 3 700540 750541 750542 750543 750544 750545 2" (50mm) 2-1/2" (65mm) 3" (75mm) 3-1/2" (90mm) 4" (100mm) 4-1/2" (115mm) FOCAL LENGTH POWER 1.6 1.6 1.6 1.25 1.25 1.25 6" 6" 6" 8" 8" 8" 700540 2" MAGNIFIER * Economical and versatile magnifier for laboratory and industrial uses, for do-it-yourselfers, mechanics and inspectors * 2" diameter with 4 power lens * Lightweight, durable 1-piece molded plastic frame UPC NO. 42414 3 538 POWER 4 FOCAL LENGTH 2" 538 RECTANGULAR ILLUMINATED MAGNIFIER SPECIALTY * Lens measures 2" x 4" for distortion-free magnification of large areas * Reversible light reflector adapts for rightor left-hand use * 2.5 power shatterproof lens, with 5 power bifocal insert * Replaceable bulb and 2 "AA" batteries are included UPC NO. 42509 6 565 Bifocal POWER 2.5 5.0 FOCAL LENGTH 4" 2" 565 ADJUSTABLE ILLUMINATED MAGNIFIER * Epoxy coated steel rod stand has adjustable lens for factory, industrial and hobby use * Illumination: 7 watt bulb * 6 ft. cord plugs into 110-120V AC. UL listed * Big lens - 4" (102mm) diameter * Small lens - 0.8" diameter * 3x magnifier with 6x spot lens UPC NO. POWER 43750 1 1050 3x (Big lens) 6x (Small Lens) 1050 T-92 Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Magnifiers General's Magnifiers are used by toolmakers, jewelers, instrument assemblers, laboratory technicians, engineers, mechanics and inspectors who need sharp clear magnification without eyestrain. These magnifiers are designed for demanding jobs in laboratory quality control, inspections and assembly functions. Our magnifiers are of the highest optical quality and offer fine resolution. 2.5 POWER POCKET MAGNIFIER * Has 2.5 power ground and polished optical glass * Folds into case for storage FOCAL LENGTH UPC NO. POWER 42400 6 532 2.5 Simulated Black Leather case 4" 532 EYE LOUPE * For toolmakers, jewelers, instrument assemblers and others who need sharp, clear magnification without eyestrain * Clear optical glass lens is ground and polished * 1" diameter lens UPC NO. POWER FOCAL LENGTH 42339 9 527 5.0 2" 527 FOLDING POCKET MAGNIFIERS * Fine quality magnifiers for laboratory technicians, engineers, mechanics and inspectors * Case and lens rims are made of black molded plastic * Available in single lens and double lens models UPC NO. IND. MOD. TOT. POW. LENS POW. FOCAL DIA. LENGTH 42403 7 42409 9 42412 9 533 536 537 Sing. Dble. Dble. 4.0 4.0 3.0 4.0 8.0 6.0 1" 1" 1-1/4" 2.5" 1.25" 1.6" 533 536 SPECIALTY BINOCULAR MAGNIFIER * For assemblers and inspectors of electronic and other small or subminiature parts, toolmakers, jewelers and engravers * Leaves hands free to work * Ground and polished optical lenses eliminate eyestrain * Tilt-up lens frame * Fits over prescription glasses UPC NO. 43734 1 950-5 POWER FOCAL LENGTH 2.25 8" 950 "It's Your Job . . . General Tools Make It Easier" T-93 SPECIALTY TOOLS Mirrors/Mini Lights The Mini-Light has an LED light bulb which has a life of 100,000 hours of continuous use. These lights require 4 "LR41" batteries which have a life of 48 continuous hours. The Mini's come with either a telescoping handle which extends up to 28-3/4" (720mm) or with an alligator clip which clips on anything, anytime, anywhere for instant, direct light. MAGNETIC BASE INSPECTION MIRROR MB560 * Adjustable 3-1/2" x 2" oblong glass inspection mirror mounted to a permanent magnet * Attaches to any steel or iron machine, tool, appliance or other equipment * Has wing nut ball joint adjustment UPC NO. 42475 4 MB560 "LITE-IT" CLIP-ON MINI-LIGHT * Clips on to anything, anytime, anywhere for instant, direct light * Light is fastened to a rugged high-impact ABS plastic Alligator Clip with a double ball joint that adjusts to any angle * 4 Alkaline, "LR41", batteries with a battery life of 48 continuous hours * LED bulb has a life of 100,000 hours of continuous use 580 UPC NO. PKG. 58001 6 580 Carded TELESCOPING MINI-LIGHT WITH MAGNETIC PICK-UP 759582 * Mini Light with 2 lb. Neodymium Magnetic pick-up are both fastened to a stainless steel telscoping wand molded into a rugged high-impact ABS plastic handle * Telescopes from 7-3/4" - 28-3/4" (197mm - 720mm) * 4 Alkaline, "LR41", batteries with a battery life of 48 continuous hours * LED bulb has a life of 100,000 hours of continuous use * Has a 2 lb. smooth surface pull capacity Neodymium donut magnet * Precision engineered 750 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 75966 5 75967 2 759581 759582 Carded Carded TELESCOPING MINI-LITE WITH MAGNETIC PICK-UP SPECIALTY 582 21/2" Diameter 759563 T-94 * A powerful permanent magnetic pick-up tool * Ideal for retrieving steel and iron parts from hard-to-reach and see work areas * Magnet is fitted in a 5-1/2" (140mm) long ergonomically designed handle * 4 Alkaline, "LR41", batteries with a battery life of 48 continuous hours * Light Bulb has a life of 100,000 hours of continuous use * Mini-Light is fastened to a chrome plated brass wand with a double ball joint * Ball and socket feature for simple, positive adjustments 2-1/2" ROUND TELESCOPING 3X POWER MAGNIFYING MIRROR * High strength corrosion resistant stainless steel wand extends from 8-1/2" to 29" (216mm - 737mm) * Precision engineered 750 Series Versa-GripTM handle for maximum performance * For the inspection of obstructed and hard to see objects * High quality 2-1/2" (64mm) diameter magnifying glass mirror improves visibility UPC NO. PKG. 05820 1 582 Carded UPC NO. PKG. 75959 7 759563 Carded Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Inspection Mirrors Inspection Mirrors facilitate inspection of inaccessible workpieces and machines by toolmakers, assemblers, inspectors and mechanics. Fully polished mirrors are enclosed in plated holders which are attached to knurled handles with ball and socket joints. Telescoping arms and vinyl cushion grip handles are offered on some mirrors. TELECSCOPING LIGHTED INSPECTION MIRROR * 2 Extra bright LED lights facilitate the inspection of hard-to-see and hard-to-reach areas * Ideal for toolmakers, machinists, inspectors and mechanics * Fully polished glass mirror is shatter-resistant * 2 "CF2032" batteries included * 360 Swivel double ball joint UPC NO. SIZE OVERALL LENGTH 02146 5 80560 2" x 3" 12-1/4", extends to 33" 80560 LONG TELECSCOPING INSPECTION MIRROR * Handle has black cushion grip * Non-slip grip * Mirror size: 2" diameter * 36" telescoping UPC NO. 05590 3 559 559 METAL INSPECTION MIRRORS * Includes plastic protective sheath * Heavy-duty construction 5562 UPC NO. SIZE OVERALL LENGTH 05531 3 05562 0 05563 7 5561 5562 5563 1-1/4" x 2" 2" x 3-3/4" 3-3/4" dia. 9-3/4", extends to 26" 10-3/4", extends to 26" 9-3/4", extends to 26" 5561 5563 GLASS INSPECTION MIRRORS UPC NO. SIZE OVERALL LENGTH 42465 5 42468 6 42471 6 42473 0 555 557 558 560 1-1/4" dia. 2-1/4" dia. 1" x 2" oval 3-1/2" x 2" oblong 8" 10-1/2", extends to 15" 9" 11-1/2", extends to 16" ACRYLIC PLASTIC INSPECTION MIRRORS UPC NO. SIZE OVERALL LENGTH 42480 8 42477 8 577 570 2-1/4" dia. 3-1/2" x 2" 10-1/2" - 15" 11-1/2" - 16" 560 570 SPECIALTY * These mirrors facilitate inspection of inaccessible workpieces and machines by toolmakers, assemblers, inspectors and mechanics * Fully polished glass mirrors are enclosed in plated holders which are attached to knurled handles with ball and socket joints * Nos. 557, 577, 560, and 570 have telescoping arms and vinyl cushion grip handles 558 557 577 REPLACEMENT MIRRORS WITH FRAMES UPC NO. 42478 5 42484 6 557RMF for No. 557 560RMF for No. 560 and No. MB560 "It's Your Job . . . General Tools Make It Easier" 555 T-95 SPECIALTY TOOLS Inspection Mirrors Inspection Mirrors facilitate inspection of inaccessible workpieces and machines by toolmakers, assemblers, inspectors and mechanics. Fully polished mirrors are enclosed in plated holders which are attached to ergonomically designed handles with ball and socket joints. DOUBLE BALL JOINT CONNECTION PERMITS INFINITE ANGLE ADJUSTMENTS HIGH STRENGTH CORROSION RESISTANT STAINLESS STEEL TELESCOPING WAND ERGONOMICALLY DESIGNED HANDLE WITH CONTOURED HEAD FOR GREATER CONTROL AND COMFORT EIGHT SIDED CUSHION GRIP HAS A NON-SLIP SURFACE RUGGED HIGH IMPACT ABS PLASTIC HANDLE ROTATING CAP FACETS FIT PALM UTILITY TELESCOPING INSPECTION MIRRORS * These mirrors facilitate inspection of inaccessible work pieces and machines by toolmakers, assemblers, inspectors and mechanics * Fully polished mirrors are enclosed in plated holders which are attached to handles with a double ball and socket joint * Double ball and socket joints adjust to any angle * Nos. 70557 have telescoping arms and vinyl cushion grip handles 70557 70555 759575 11/2" OVERALL LENGTH UPC NO. SIZE 22344 9 70555 1-3/8" dia. 22347 0 70557 2-1/4" dia. 1-1/2" ROUND PLASTIC TELESCOPING MIRROR * For the inspection of obstructed and hard to see objects * High performance 1-1/2" (38mm) diameter LexanTM mirror resists scratching and shattering 5" extends to 27-1/2" 9-3/4" extends to 14-3/4" * High strength corrosion resistant stainless steel wand extends from 7-5/8" to 28" (194mm - 711mm) * Precision engineered 750 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 75957 3 759575 Carded 759570 SPECIALTY 2" X 3" RECTANGULAR PLASTIC TELESCOPING MIRROR * For the inspection of obstructed and hard to see objects * High performance 2" x 3" (51mm x 76mm) rectangular LexanTM mirror resists scratching and shattering 11/2" 1-1/2" ROUND PLASTIC, FIXED LENGTH, INSPECTION MIRROR * For the inspection of obstructed and hard to see objects * High performance 1-1/2" (38mm) diameter LexanTM mirror resists scratching and shattering * High strength corrosion resistant stainless steel wand extends from 9-1/4" to 30" (235mm - 762mm) * Precision engineered 750 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 75950 4 759570 Carded * High strength stainless steel shaft resists corrosion * Overall length is 8" (203mm) * Precision engineered 700 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 70972 1 709575 Carded 709575 T-96 Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Inspection Sets TM TELESCOPING * Stainless Steel Speed-ChuckTM and telescoping wand combination provides quick and limitless inspection and retrieval solutions * Ergonomically designed handle with contoured head for greater control and comfort * Handle telescopes from 6-3/8" (163mm) to 26" (660mm) * Spring-loaded Speed-ChuckTM allows blade changes instantly * All attachments are fastened to a stainless steel Speed-ChuckTM adapter with a double ball joint, adjusts to any angle INSPECTION SETS * Precision Locking System firmly holds blades in place * Available attachments: * Neodymium magnets: 2 lb., 5 lb. and 10 lb. smooth surface pull capacities * Mirrors & Magnifiers: 1-1/2" (38mm) diameter * 2" x 3" (51mm x 76mm) rectangular mirror * 2-3/8" (60mm) dia. 3x power magnifying mirror * 2-1/2" (64mm) dia. 3x power magnifier; * Alligator clip * Mini-Lite * All sets are securely and safely protected within a fitted zippered case 3-PIECE TELESCOPING "SPEED-CHUCKTM" INSPECTION SET * Set includes: * 26" stainless steel telescoping wand with Speed-ChuckTM handle * 2 lb. magnetic pick-up * 1-1/2" round plastic mirror * Mini-Lite * Batteries included * Precision engineered 750 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 75960 3 759903 Zippered Case/Boxed 759903 5-PIECE TELESCOPING "SPEED-CHUCKTM " INSPECTION SET * Set includes: * 26" stainless steel telescoping wand with Speed-ChuckTM assembly * 5 lb. magnetic pick-up * 2" x 3" rectangular plastic mirror * 3x power magnifier, alligator clip * Mini-Lite. Batteries included * Precision engineered 750 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 75961 0 759905 Zippered Case/Boxed 759905 9-PIECE TELESCOPING "SPEED-CHUCKTM " INSPECTION SET UPC NO. PKG. 75962 7 759909 Zippered Case/Boxed 759909 TELESCOPING MAGNETIC PICK-UPS * High powered 2 lb., 5 lb., 10 lb. Neodymium magnets are 6 times stronger than standard Cobalt magnets * Double ball joint connection permits infinite angle adjustments * High strength corrosion resistant stainless steel wand extends from 6-1/2" - 27" (165mm - 686mm) * Magnet holder is constructed of highstrength reinforced nylon * Precision engineered 750 Series Versa-GripTM handle for maximum performance UPC NO. PULL PKG. 75933 7 75958 0 75939 9 759383 759394 759398 2 lb. 5 lb. 10 lb. Carded Carded Carded "It's Your Job . . . General Tools Make It Easier" 759383 759394 759398 T-97 SPECIALTY * Set includes: * 26" stainless steel telescoping wand with Speed-ChuckTM assembly * 2 lb., 5 lb. and 10 lb. magnetic pick-ups * 1-1/2" round mirror * 2" x 3" rectangular mirror * 2-1/2" round glass magnifying mirror * 3x power magnifier, alligator clip * Mini-Lite * Batteries included * Precision engineered 750 Series Versa-GripTM handle for maximum performance SPECIALTY TOOLS Magnetic Retreiving Tools FIXED LENGTH MAGNETIC PICK-UP, 2 LB. PULL 709392 * Has a 2 lb. smooth surface magnetic pull capacity with an overall length of 6-3/4" (171mm) * High strength stainless steel shaft resists corrosion * Durable ball joint connection permits infinite angle adjustments * High powered Neodymium Magnet is 6 times stronger than standard Cobalt Magnets * Magnet holder is made of high-strength reinforced nylon * Precision engineered 700 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 70972 1 709392 Carded POCKET MAGNETIC PICKUP 386 384N * Powerful permanent magnet in a knurled aluminum holder with handy pocket clip * High-powered neodymium magnet is six times more powerful than standard magnet * Ideal for retrieving small steel and iron parts from hard-to-reach areas * Measures 5-1/2" (140mm) overall UPC NO. MAGNET PULL 42219 4 386 NEO 2 lb. pull FLEX-O-STIFF MAGNETIC PICKUP * An ideal tool for retrieving steel parts from hard-to-reach places * High-powered neodymium magnet is six times more powerful than standard magnet * Permanent magnetic power * Magnet is fitted into an 18" (457mm) nickel plated holder, which can be extended to a 32" (813mm) flexible retriever UPC NO. MAGNET PULL 42210 1 384N NEO 2 lb. pull MAGNETIC PICKUP WITH PIVOT JOINT SPECIALTY 392 * An excellent tool for retrieving small steel parts from hard-to-reach places * High-power neodymium magnet lifts up to two pounds and will never lose its magnetism * 8-3/4" (222mm) overall length * Locking pivot joint allows user to pick up objects around corners * Nickel plated steel body with cushion grip handle * Pocket clip for convenient storage UPC NO. PULL 42224 8 392 2 lb. pull EXTRA-LONG, MAGNETIC PICKUP WITH PIVOT JOINT 394 T-98 * An excellent tool for retrieving steel parts from hard-to-reach places * High-power neodymium magnet lifts up to five pounds and will never lose its magnetism * Steel body measures 13" (330mm) and can be extended to 27" (685mm) * Locking pivot joint allows user to pick up objects around corners * Body is chrome plated, with a vinyl cushion grip handle UPC NO. PULL 42228 6 394 5 lb. pull Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Magnetic Retrieving Tools BENDABLE MAGNETIC PICK-UP * An excellent tool for retrieving steel parts from hard-to-reach places * High-power neodymium magnet * Knurled aluminum body with bendable 15" (381mm) wire * Overall length is 20" (508mm) * Lifts up to 2 pounds UPC NO. PULL 42229 3 395 2 lb. pull 395 TELESCOPING MAGNETIC PICKUP * A powerful permanent magnetic pickup tool * Ideal for retrieving steel and iron parts from hard-to-reach work areas * Magnet is fitted in a 5-1/2" long nickel plated steel handle that can extend up to 23-1/2" * Holder is fitted with a pocket-clip UPC NO. PULL 42208 8 383NX 2 lb. pull 383NX TELESCOPING MINI-LIGHT WITH MAGNETIC PICK-UP * Mini Light with 2 lb. Neodymium Magnetic pick-up are both fastened to a stainless steel telscoping wand molded into a rugged high-impact ABS plastic handle * Telescopes from 7-3/4" - 28-3/4" (197mm - 720mm) * 4 Alkaline, "LR41", batteries with a battery life of 48 continuous hours * LED bulb has a life of 100,000 hours of continuous use * Has a 2 lb. smooth surface pull capacity Neodymium donut magnet * Precision engineered 750 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 75966 5 75967 2 759581 759582 Carded Carded 759582 TELESCOPING MINI-LITE WITH MAGNETIC PICK-UP * A powerful permanent magnetic pick-up tool * Ideal for retrieving steel and iron parts from hard-to-reach and see work areas * Magnet is fitted in a 5-1/2" (140mm) long ergonomically designed handle * 4 Alkaline, "LR41", batteries with a battery life of 48 continuous hours * Light Bulb has a life of 100,000 hours of continuous use * Mini-Light is fastened to a chrome plated brass wand with a double ball joint * Ball and socket feature for simple, positive adjustments UPC NO. PKG. 05820 1 582 Carded 582 PRECISION MAGNETIZER/DEMAGNETIZER * Demagnetize tools for use in electronics * Step design permits greater conrol of magnetism UPC NO. DIMENSIONS 36010 6 3601 2" x 2" x 1-1/8" (58 x 58 x 29mm) 3601 MAGNETIZER/DEMAGNETIZER * Specially designed for magnetizing and demagnetizing screwdrivers, nut drivers, wrenches, taps and small tools * Converts any tool blade into a magnetic retriever for screws, nuts and metallic particles UPC NO. DIMENSIONS 42021 3 360 1" x 1" x 1-3/4" (25 x 25 x 44mm) "It's Your Job . . . General Tools Make It Easier" 360 T-99 SPECIALTY * Magnetize and demagnetize screwdrivers, tweezers, tool bits and other steel objects * Magnetize by sliding the tool through the (+) opening * Demagnetize by sliding the tool through the (-) opening SPECIALTY TOOLS Magnetic Retrieving Tools The Magnetic Sweeper is an ideal tool for retrieving iron, steel and all ferrous materials. Especially effective around new construction sites, both indoors and outdoors. Also effective in machine shops for cleaning up around power equipment such as drill presses, milling machines and lathes. The Magnetic Tool Rack holds and organizes tools in garages, work shops and service stations. PICKUP STICKTM SWEEPER * An ideal tool for retrieving iron, steel and all ferrous materials * Powerful, permanent magnet for a no-stoop pick-up * Vinyl-coated magnet for long-life and durability * 37" (940mm) steel shaft for greater strength and durability * Plastic handle grip for greater control and comfort UPC NO. 31434 5 397 Pickup Stick 397 UTILITY SWEEPER 354 * An ideal tool for retrieving iron, steel and all ferrous materials * Powerful, permanent magnets for a no-stoop pick-up * 39" (991mm) aluminum shaft * Plastic handle grip for greater control and comfort * Some assembly required UPC NO. WIDTH 22189 6 354 Sweeper 24" (610mm) MAGNETIC TOOL RACK * Holds and organizes tools in garages, workshops and service stations * Powerful permanent magnet * Includes: 1 - 20" Magnetic Tool Rack, 2 mounting brackets with screws * Modular mounting brackets can be used to create additional lengths UPC NO. WIDTH 25001 8 250 20" (508mm) 250 SPECIALTY MAGNETIC STRIPS 368 * Our flexible magnetic strip with adhesive backing adheres to most smooth clean surfaces * Holds small-metal objects * 1/16" thick and easily cuts to desired length with scissors or knife UPC NO. SIZE 42027 5 42033 6 42036 7 42038 1 366 368 369 369-100 1/2" x 30" 1" x 30" 1" x 10' 1" x 100' SHALLOW POT CERAMIC MAGNETS 376 T-100 * Shallow depth permits use in confined spaces * Nos. 376A and 376B have 3/16" diameter clearance holes for fastening with rods or bolts * No. 376C has a 9/32" diameter clearance hole UPC NO. DIA. 42111 1 42114 2 42117 3 376A 376B 376C 1-3/8" 3/16" 2" 1/4" 2-5/8" 3/8" DEPTH Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com PULL 12 lbs. 20 lbs. 35 lbs. ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Alnico Magnets Aluminum, nickle and cobalt alloy make General's Alnico line of magnets strong and permanent. The strong magnetic pull of the Alnico Magnets make it perfect for lifting, holding, sorting, clamping or retrieving steel or iron parts. Alnico Magnets will retain their magnetic force indefinitely. Removable keepers insure long life and optimum performance. BUTTON TYPE ALNICO MAGNETS * Button shaped magnet has almost unlimited applications * Retrieves screws and steel parts * Center hole on top of magnet for easy fastening UPC NO. DIA. HT. PULL CORED HOLE 42073 2 42076 3 42079 4 42082 4 42085 5 372A 372B 372C 372D 372E 1/2" 3/4" 1" 1-1/4" 1-1/2" 3/8" 1/2" 5/8" 3/4" 7/8" 1-1/2 lbs. 4 lbs. 6-1/2 lbs. 14 lbs. 18-1/2 lbs. 1/8" 1/8" 3/16" 3/16" 1/4" 372 POT TYPE ALNICO MAGNETS * Unique combination of strong magnet with insulating ring gives this magnet the superior holding power of larger magnets * 1/4" diameter x 20 threads-per-inch hole for attaching to fixtures and machines UPC NO. 42093 0 42096 1 42102 9 42105 0 374A 374B 374C 374D DIA. PULL 11/16" 6 lbs. 13/16" 10 lbs. 1-1/16" 18 lbs. 1-3/8" 35 lbs. WT. HT. 6 oz. 5/8" 6 oz. 3/4" 12 oz. 1" 24 oz. 1-3/16" 374 POWER ALNICO MAGNETS 370-1 * Strong magnetic pull for lifting, holding, sorting, clamping or retrieving steel or iron parts * Hole in top of magnet for attaching conveyors, racks, and welding jigs UPC NO. APPROX. SIZE PULL WIDTH OZ. LBS. IN. 42041 1 42044 2 42050 3 42053 4 42056 5 42061 9 42064 0 42067 1 370-1 370-2 370-4 370-6 370-8 370-12 370-16 370-24 .8 2 4 6 8 12 16 24 8 13 22 30 32 42 50 70 1-1/8" 1-1/8" 1-1/2" 1-3/4" 2-3/16" 2-5/8" 3" 2-1/2" HT. IN. DEPTH IN. POLE WIDTH IN. OPENING BETWEEN POLES, IN. CORED HOLE OZ. WEIGHT EACH WITH KEEPER 1" 3/4" 1" 1-1/8" 1-13/16" 2-1/4" 2-1/2" 1-13/16" 5/16" 3/4" 1" 1-1/8" 15/16" 15/16" 15/16" 1-7/8" 5/16" 1/4" 5/16" 5/16" 1/2" 5/8" 3/4" 5/8" 1/4" 9/16" 3/4" 7/8" 1-3/16" 1-3/8" 1-1/2" 1-3/8" -- 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 1/4" 1 3 5 8 10 15 20 28 370-2 WELDING MAGNET * Small compact design makes the "quick clamp" useful for all light ferrous fabrication work * Ideal to include in the tool kit for numerous holding applications UPC NO. THICKNESS PULL LBS. WT. OZ. 42122 7 377 .468 50.0 9.0 377 MAGNETIC ADJUSTABLE WELDING LINK * Ideal for holding steel plates in position for welding, brazing, and soldering, eliminating the need for clamps or temporary fastening * General's welding links are constructed of two heavy-duty Alnico magnetic blocks linked together with a strong steel bar and wing nuts for easy angle adjustment UPC NO. SIZE OF BLOCK PULL PER BLOCK 42226 2 375 2.4" x 1" x 1" 25 lbs. 375 "It's Your Job . . . General Tools Make It Easier" T-101 SPECIALTY * Designed to enable fast and accurate holding of ferrous metal for welding and assembly jobs * Holds both sheet and tube at angles of 180, 90, 45 and 30 * Two body holes enable the clamp to be built into jigs or hung when not used QP05 TM SAW/DRIVER A 4-IN-1 CUTTING & DRIVING SYSTEM The Keyless Quick Change Locking Chuck accepts both Quick Change Power Bits and Standard Reciprocating Saw Blades. SPECIALTY TOOLS The "QUAD" Saw/Driver "THE QUADTM" Saw/Driver set offers a 4-IN-1 Cutting and Driving System; a jab saw, key hole saw, power driver, and speed driver. The 2 position quick change locking handle offers both power and speed. A convenient holster holds all 14 pieces. SAW/DRIVER "THE QUADTM" 14 PIECE SAW/DRIVER SET * A 4-IN-1 cutting and driving system Jab Saw with straight handle and special Sheetrock reciprocal blade Keyhole Saw in the pistol grip handle position Power Driver in the pistol grip position Speed Driver, screw or nut driver with straight handle * The keyless Quick-Change locking chuck accepts both Quick-Change bits and industry standard reciprocating saw blades 14 PIECE SET INCLUDES: * 3 saw blades; drywall, Metal/PVC, wood, * 7 insert bits * 1 hex to square adaptor * 1 quick change handle * 1 holster with belt-clip * 1 bit extender * Swivel locking chuck holds all reciprocating blades and speed shank power bits * Comfortable handle easily locks in the straight or pistol grip position UPC 86014 9 NO. 86014 Bit Extender 86014 SPECIALTY HOLSTER "It's Your Job . . . General Tools Make It Easier" T-103 SPECIALTY TOOLS Cutting & Carving Tools General Tools Professional Quality Knife Sets are designed specifically for the precision cutting of a variety of materials, from fine, intricate cutting to heavy-duty carving and scraping. General Tools offers a complete line of precision hobby knives for industrial users, crafts people and hobbyists. A broad selection of surgically sharp replacements and accessory blades are available. PRECISION HOBBY KNIVES * Precision knives for fine angle cuts 1901 UPC 1903 43974 1 1901 43976 5 1902 43978 9 1903 1902 1920 1922 1923 HANDLE KNIFE CONSTRUCTION WEIGHT NO. Aluminum Aluminum Aluminum PKG. QTY. Light duty 5 Medium duty 5 Heavy-duty 5 HOBBY KNIFE BLADES 1924 * For precision cutting from medium to heavy cuts * Packed in a quantity of 5. UPC 43988 8 43992 5 43994 9 43996 3 1915 NO. REPLACEMENT FOR 1920 1922 1923 1924 1901 1902, 1903, 1905 1902, 1903, 1905 1902, 1903, 1905 PRECISION KNIFE SET * Consists of one each of Nos. 1901, 1902 and 1903 knives and 10 assorted blades in a fitted wooden case UPC NO. 43984 0 1915 22-PIECE PRECISION KNIFE AND BLADE SET SPECIALTY * Designed specifically for the precision cutting of a variety of materials * Heavy-duty locking screw chuck holds blades securely in place * Set includes: * 2 Multi-Blade Handles No. 1 and No. 2 * 20 Knife Blades * 5 - No. 11 * 5 - No. 16 * 3 - No. 17B * 3 - No. 22 * 2 - No. 26 * 2 - No. 28 blades * Packaged in a pocket sized zippered case * All ULTRATECHTM knife handles accept industry standard blades * Precision engineered 700 and 750 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 75622 0 75622 Zippered Case/Carded 75622 #26 #16 #28 #17 #11 #22 Blades shown actual size T-104 Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Cutting & Carving Tools General's Utility Knives are used for cutting and scoring fiber-board, matboard, roofing, linoleum, carpeting, plasterboard and veneers. The Five-Piece Carving Tool Set offers a fixed blade that is forged tool steel, ground and hardened for lasting sharpness. Handles are made of hardwood for greater control and comfort grip. SLIDE LOCKING UTILITY KNIFE * For cutting and scoring fiberboard, wallboard, matboard, cardboard, corkingboard, roofing, linoleum, carpet, plasterboard, veneers and other materials * Opens instantly to any one of three cutting positions * Blade retracts into handle for safety * Comes with three replaceable heavy-duty alloy steel blades, No. 852, in storage handle UPC NO. 43046 5 855 Heavy-duty 855 HEAVY-DUTY UTILITY KNIFE BLADES UPC NO. THICKNESS 43027 4 43030 4 852-5 852-100 0.025 0.025 852 PKG. QTY 5 100 FIVE-PIECE CARVING TOOL SET * Five different blade shapes * Blades are made of hand forged tool steel, ground and hardened for lasting sharpness * Half round palm style handles are made of hardwood * Comes in vinyl case * Overall length 5" UPC NO. BLADE SHAPE 43900 0 1293 Bent large gouge, 5/16" Straight small gouge, 5/32" Bent V parting tool, 5/32" Straight skew chisel, 5/16" Bent square chisel, 5/16" Bent Large Gouge, 5/16" Bent V Parting Tool, 5/32" Straight Small Gouge, 5/32" Bent Square Chisel, 5/16" Straight Skew Chisel, 5/16" 1293 GLASS CUTTER UPC NO. LENGTH 43061 8 8501 5" (125mm) 8501 JUNIOR HACKSAW * Handy cutting tool for hobbyists, do-it-yourselfers and professionals * Ergonomically designed with a comfortable high-impact plastic handle * 6" (150 mm) replaceable heat treated blade for cutting metal * Sturdy tubular frame * Reversible blade for push or pull cutting * Set of 6 replacement blades: 3 wood and 3 metal UPC NO. 43067 0 43070 0 864 864B Set of 6 Blades 864 "It's Your Job . . . General Tools Make It Easier" T-105 SPECIALTY * Cuts plate glass from 1/8" to 1/4" thick * Steel wheel with honed angle of 120 for cutting single and double strength glass * Ball end handle for snapping of scored glass * Tooth design to remove rough edges SPECIALTY TOOLS Grommets, Snaps & Screw Fasteners General Tools offers Solid Brass Grommet Kits, which are available in three sizes, Snap Fastener Kits and Screw Fastener Kits. These various kits are used to repair canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture and pool covers. Each set has handy step-by-step instructions. UTILITY GROMMET KITS * These various size kits are used to repair canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture and pool covers * Contains brass plated steel grommets with hole cutter and hardwood backer block, hardened mandrel and anvil * Setting tool has knurled body for greater comfort and safety * Setting tool and anvil are coded with lines for each individual size grommet * Three sizes available 1261 INDIVIDUAL SIZE UPC NO. DESCRIPTION 22341 8 71260 22342 5 71262 22343 2 71264 1/4" Grommet Kit with 48 grommets 3/8" Grommet Kit with 24 grommets 1/2" Grommet Kit with 12 grommets GROMMET REFILLS UPC NO. SPECIFICATIONS 41103 7 1261-0 41104 4 1261-2 41105 1 1261-4 1/4" Grommet Refill with 24 Grommets 3/8" Grommet Refill with 24 Grommets 1/2" Grommet Refill with 24 Grommets 71260 SNAP FASTENER KIT * Contains 2-piece setting tool and 6 fastener sets * Solid brass fasteners with nickel plating will not rust * Knurled body for greater comfort and safety SPECIALTY 1265 UPC NO. SPECIFICATIONS 41106 8 1265 41107 5 1266 Snap Fastener Kit with 6 Fasteners 6 Snap Fastener Refills SCREW SNAP FASTENER KIT 1267 T-106 * Contains 2-piece setting tool and 6 fastener sets * Solid brass fasteners with nickel plating will not rust * Knurled body for greater comfort and safety * Screw snap fastener base has 3/8" long screw for attaching to wood, plastic and fiberglass UPC NO. SPECIFICATIONS 41108 2 1267 41109 9 1268 Screw Snap Fastener Kit with 6 Fasteners 6 Screw Snap Fastener Refills Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Punches & Punch Sets Arch Punches, Hollow Steel Punches and Gasket Punches are all used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials. ARCH PUNCHES * Available in individual sizes listed * For punching holes in leather, rubber, gasket material and soft metals * Inside taper for clearance * Heat treated forged steel * The 1271ST consists of seven punches, one each of 1/4", 3/8", 1/2", 5/8", 3/4", 7/8" and 1", comes in plastic roll pouch UPC 43849 2 NO. SIZE 1271ST Set of 7 HOLLOW STEEL PUNCHES * For punching holes in leather, rubber, canvas, cardboard, plastic and other materials * Made of forged steel with side clearance hole for easy removal of punched material * The 1280ST which consists of six punches, 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2", comes in a plastic roll pouch UPC 43896 6 NO. SIZE 1280ST These fine quality tools are forged and heat-treated for long life and the cutting edges will stay sharper longer. Set of 6 UPC 43793 8 43799 0 43804 1 43810 2 43813 3 43816 4 43819 5 43821 8 43822 5 43825 6 43827 0 43829 4 43831 7 43833 1 NO. 1271A 1271C 1271E 1271G 1271H 1271-I 1271J 1271K 1271L 1271M 1271N 1271-O 1271P 1271Q SIZE 1/4" 3/8" 1/2" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1271ST * Available in individual sizes listed UPC 43856 0 43859 1 43862 1 43865 2 43868 3 43870 6 43872 0 43874 4 43876 8 43878 2 43880 5 43882 9 43884 3 43886 7 43888 1 43890 4 NO. 1280A 1280B 1280C 1280D 1280E 1280F 1280G 1280H 1280-I 1280J 1280K 1280L 1280M 1280N 1280-O 1280P SIZE 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 9/32" 5/16" 11/32" 3/8" 13/32" 7/16" 1/2" 9/16" 5/8" 3/4" 1280ST PROFESSIONAL 10-PIECE GASKET PUNCH SET * Fitted plastic storage case UPC NO. DESCRIPTION 43751 8 S1274 10 pc. set S1274 GASKET PUNCH SET * Compact and economical set for punching holes in soft materials and leather * Set of 10 punches, one each of 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8" and 1", with driving mandrel comes in a molded plastic storage case UPC NO. 43759 4 S1270 "It's Your Job . . . General Tools Make It Easier" S1270 T-107 SPECIALTY * For punching holes in gasket material, leather, rubber, canvas, cardboard, plastic and sheet metal * Nine interchangeable hardened and tempered alloy steel punches: 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8" and 1" * Heavy-duty, spring-loaded, self-centering steel mandrel * Both mandrel and punches are knurled and have a threaded coupling to prevent slippage and hold punch securely to mandrel SPECIALTY TOOLS Pliers HIGH QUALITY CHROME VANADIUM STEEL WILL NOT RUST SERRATED JAWS FOR BETTER GRIP DOUBLE DIPPED CUSHION GRIP HANDLES FOR SAFE GRIPPING ERGONOMICALLY SHAPED HANDLE FOR MAXIMUM USER COMFORT AND CONTROL LARGE STEEL LEAF SPRING FOR QUICK OPENING JAWS 8-PIECE TECHNICIAN'S MINI-PLIER SET * A compact set designed for Electricians, Technicians, Hobbyists and Do-it-Yourselfers * High quality Chrome Vanadium Steel will not rust * Serrated jaws for better grip * Large Steel Leaf Spring for quick opening jaws * Fully-polished head * Double dipped cushion grip handles for safe gripping * Durable Vinyl Case for the easy and safe storage of these precision pliers * Consists of eight of the most popular sizes of mini-pliers * No. 901 - Chain Nose Serrated Jaw Pliers. OAL - 5" * No. 902 - Round Nose Pliers. OAL - 4-3/4" * No. 903 - Smooth Jaw Pliers. OAL - 4-7/8 * No. 904 - Curved Chain Nose Pliers. OAL - 4-3/4" * No. 905 - Long Needle Nose Pliers. OAL - 6". * No. 906 - Diagonal Head/Oval Cutter. OAL - 4-1/4" * No. 907 - End Cutter. OAL - 4-1/8" * No. 908 - "Mini" Linemans Pliers. OAL - 4-1/2" * No. 938 - 8 piece "Mini" Plier Set * No. 934 - 4 piece "Mini" Plier Set; Nos. 905, 906, 907, 908 UPC NO. PKG. 00938 8 00934 0 938 934 8 Piece - Vinyl Case/Boxed 4 Piece - Vinyl Case/Boxed SPECIALTY CHAIN NOSE, SERRATED JAW PLIERS * For cutting, shaping, bending and gripping light materials and wire * Side cutter will handle most cutting requirements * OAL jaw length - 1-3/16" (30mm) * OAL length - 5" (127mm) 901 UPC NO. PKG. 41059 7 901 Bulk (Open Stock) ROUND NOSE PLIERS * The perfect jewelers pliers for making loops and jump rings * OAL jaw length - 1-1/16" (27mm) * OAL length - 4-3/4" (120mm) UPC NO. PKG. 41061 0 902 Bulk (Open Stock) T-108 Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com 902 ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Pliers FLAT NOSE, SMOOTH JAW PLIERS * For bending wire, jewelry making and retrieving objects from tight areas * OAL jaw length - 1-1/16" (27mm) * OAL length - 4-7/8" (124mm) 903 UPC NO. PKG. 41064 1 903 Bulk (Open Stock) CURVED CHAIN NOSE PLIERS * Used for odd angle access, retrieving and positioning with non-serrated jaws * OAL jaw length - 1-1/8" (29mm) * OAL length - 4-3/4" (120mm) UPC NO. PKG. 41066 5 904 Bulk (Open Stock) 904 LONG NEEDLE NOSE PLIERS * Used for extreme far reaching access, positioning and retreiving * OAL jaw length - 2-1/8" (54mm) * OAL length - 6" (152mm) 905 UPC NO. PKG. 41067 2 905 Bulk (Open Stock) OVAL HEAD DIAGONAL CUTTER * For cutting soft wire and other light materials. For an accurate cut in tight areas * OAL jaw length - 1/2" (13mm) * OAL length - 4-1/4" (108mm) UPC NO. PKG. 41069 2 906 Bulk (Open Stock) 906 END CUTTER 907 UPC NO. PKG. 00907 4 907 Bulk (Open Stock) SPECIALTY * For accurate flush surface cutting of light materials and wire * OAL jaw length - 9/32" (7mm) * OAL length - 4-1/8" (105mm) "MINI" LINEMAN'S PLIERS * For securing a positive grip on flat objects to form a bend * Serrated jaws for better grip * Side cutter will handle most cutting requirements * OAL jaw length - 7/8" (22mm) * OAL length - 4-1/2" (114mm) UPC NO. PKG. 00908 1 908 Bulk (Open Stock) "It's Your Job . . . General Tools Make It Easier" 908 T-109 SPECIALTY TOOLS Punches, Scrapers & Files General's Revolving Punch Plier is a convenient spring tension, self-opening tool for punching round holes in leather, plastic, rubber, canvas cardboard and similar materials. The Dial Wire Stripper can be set to a desired size for individual or repetitive stripping without damaging the wire. REVOLVING PUNCH PLIER * A convenient spring tension, self-opening tool for punching round holes in leather, plastic, rubber, canvas, cardboard and similar materials * Made of plated steel with six tapered and hollow, hardened steel punches * Punch sizes: 5/64", 3/32", 7/64", 1/8", 5/32", 3/16" (2.0, 2.5, 3.0, 3.5, 4.0, 4.5mm) 72 UPC NO. LENGTH 41039 9 72 8-1/4" (210mm) DIAL WIRE STRIPPER * Dial the wire size desired for individual or repetitive stripping without damaging wire * Spring opening for fast and easy cutting or stripping 69 * Dial lock closes stripper to protect hardened cutting edges * Vinyl cushion handles UPC NO. WIRE GAGE CAPACITY 41036 8 69 12, 14, 16, 18, 20, 22, 24, 26 COTTER PIN PULLER * General's compound bend design allows user to extract cotter pins with either a pull or twist motion. Ideal for use in confined work areas * Plated shaft and point are 4" (101mm) in length and made of long lasting heat treated high carbon steel 64 * A safe and easy way to remove cotter pins * Heavy-duty plastic handle with a comfortable grip UPC NO. SPECIFICATIONS 41030 6 64 Length: 7-1/2" (190mm) The compound bend design allows extraction with either a pull or twist motion. SPECIALTY TRIANGULAR SCRAPER 478 * Useful tool for scraping, trimming, and deburring metals, tubing and other materials * Hardened and tempered triple edge blade is secured in wood handle with steel ferrule * Hollow ground cutting edges stay sharp longer and resharpen easily UPC NO. 42321 4 478 SIX-PIECE SWISS PATTERN NEEDLE FILE SET * Designed to meet the exacting requirements of tool and die makers, instrument makers, jewelers, watchmakers and other craftspeople * Precision made of finest quality tool steel * Packed in snap button plastic case * #2 single style cut UPC NO. LENGTH 42318 4 S476 5-1/2" FILES IN SET 6 FILE END VIEWS S476 T-110 WARDING (FLAT) SQUARE ROUND HALF ROUND THREE SQUARE EQUALLING (MILL) Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Multi-File & Needle File Sets General Tool's Swiss Pattern Needle File Sets are designed to meet the exacting requirements of tool and die makers, instrument makers, jewelers, watchmakers, hobbyists and other craftspeople. Precision made of the finest quality tool steel. The 5-1/2" long knurled aluminum handle provides maximum filing control and comfort and will fit all styles of General's Swiss Pattern Files. FOUR-PIECE SWISS PATTERN NEEDLE FILE SET WITH HANDLE * Set includes three of the most commonly used file shapes: flat, round and triangular. All are high-quality tool steel and measure 5-1/2" (138mm) long * A 5-1/2" (138mm) long knurled aluminum handle provides maximum filing control and comfort * 8-1/2" (213mm) overall size * #2 single style cut * General Purpose file set for hobbyists and craftsmen UPC NO. 42319 1 S477 3 files and handle FILE END VIEWS THREE SQUARE ROUND S477 WARDING (FLAT) SWISS PATTERN NEEDLE FILE SET * A complete set of General Purpose files to meet the needs of craftsman, hobbyists and jewelers * Files are made of high quality tool steel * Set includes 12 different files including the three most commonly used file shapes: flat, round and triangular. All measure 5-1/2" (138mm) long * Packed in snap button plastic case * #2 single style cut UPC NO. LENGTH FILES IN SET 42315 3 S475 5-1/2" 12 FILE END VIEWS WARDING (FLAT) SQUARE CROSSING ROUND OVAL HALF ROUND KNIFE BARRETTE SLITTING JOINT ROUND THREE EDGE SQUARE EQUALLING (MILL) S475 6-PIECE SWISS PATTERN NEEDLE FILE SET UPC NO. PKG. 70746 8 707476 Holster/Carded THREE SQUARE EQUALLING (MILL) ROUND SQUARE WARDING (FLAT) HALF ROUND FILE END VIEWS 707476 ADJUSTABLE FILE/TOOL HANDLE * For holding files, reamers, hacksaw blades and other tang handled tools * Exclusive steel parallel clamping jaws grip the entire length of the inserted tang to prevent slipping * Large, quick adjusting knurled knob ensures positive locking * Rustproof handle with steel parts * Conforms to government specifications NN-H-0085 UPC NO. 43666 5 890 1-1/16" (27mm) 890 4-1/8" (105mm) "It's Your Job . . . General Tools Make It Easier" T-111 SPECIALTY * A basic set of General Purpose Files to meet the needs of craftspeople, tool and die makers, hobbyists and jewelers * Set includes 6 different files. All measure 5-1/2" (138mm) long with 1/8" (3mm) diameter shanks * Files are constructed of high quality Chromium Alloy Steel * All files are 2-1/2" (63mm) long, #2 Single Cut Swiss Pattern * Knurled handle file can be used without handle assembly * Precision locking screw chuck holds files securely in place * Precision engineered 700 Series Versa-GripTM handle for maximum performance SPECIALTY TOOLS File & Probe Sets General Tool's Swiss Pattern Needle File Sets are designed to meet the exacting requirements of tool and die makers, instrument makers, jewelers, watchmakers, hobbyists and other craftspeople. Precision made of the finest quality tool steel. Knurled handle file can be used without handle assembly. Precision locking screw chuck holds files securely in place. General's Probe, Positioning and Spring Hooks are useful in a wide variety of mechanical and electrical functions. Ideal for probing, cleaning, picking or marking small work surfaces. 12-PIECE SWISS PATTERN NEEDLE FILE SET * A complete set of General Purpose Files to meet the needs of craftspeople, tool and die makers, hobbyists and jewelers * Set includes 12 different files. All measure 5-1/2" (138mm) long with 1/8" (3mm) diameter shanks * Files are constructed of high quality Chromium Alloy Steel * All files are 2-1/2" (63mm) long, #2 Single Cut Swiss Pattern * Knurled handle file can be used without handle assembly * Precision locking screw chuck holds files securely in place * Precision engineered 700 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 70745 1 707475 Zippered Case/ Carded 707475 FILE END VIEWS WARDING (FLAT) SQUARE CROSSING ROUND OVAL HALF ROUND EQUALLING (MILL) KNIFE BARRETTE SLITTING JOINT ROUND EDGE THREE SQUARE 4-PIECE INTERCHANGEABLE STAINLESS STEEL PROBE SET * For probing, cleaning, picking, or marking small work surfaces * Set Includes: * 4 heat treated stainless steel point configurations: * Straight * 180 Hook * 35 Bend * 90 Bend * Precision locking screw chuck holds blades securely in place * Each blade is 5" long (127mm); OAL 8-1/2" (216mm) with handle * Precision engineered 700 Series Versa-GripTM handle for maximum performance SPECIALTY 707862 UPC NO. PKG. 70786 4 707862 Holster/Carded 4-PIECE PRECISION BLADE PROBE SET - FIXED BLADE * For probing, cleaning, picking or marking small work surfaces * Set includes the most popular mini-tool configurations: * Straight * 180 Hook * 35 Bend * 90 Bend * Each blade is 2-5/8" (67mm) with an overall length of 6" (152mm) * Blades constructed of heat treated 8650 Alloy steel (nickel-chromium-molybdenum) * Precision engineered 600 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 60004 2 60004 Carded Set contains: NO. TYPE SIZE BLADE LENGTH 610001B 610002B 610003B 610004B Probe Probe Probe Probe Straight Probe 35 Bent Probe 90 Bent Probe 180 Hook Probe 2-5/8"(67mm) 2-5/8"(67mm) 2-5/8"(67mm) 2-5/8"(67mm) 60004 T-112 Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Probe Sets 3-PIECE PROBE AND HOOK SET * For probing, cleaning, picking or marking small work surfaces * Three heat treated, high carbon steel point configurations: 45 degree, double bend and hook bend * Extra long aluminum knurled body * Hex head prevents rolling UPC NO. OVERALL LENGTH 24500 7 862 6-1/2" (165mm) 862 4-PIECE MICRO PROBE SET * For probing, cleaning, picking or marking small work surfaces * Four heat treated, high carbon steel point configurations: 45 degree, two double bends and hook bend * Extra long aluminum knurled body * Packaged in a reuseable plastic tube UPC NO. OVERALL LENGTH 24501 4 868 5-1/2" (138mm) 868 12-PIECE STAINLESS STEEL PROBE, POSITIONING & SPRING HOOK SET * Useful in a wide variety of mechanical and electrical functions * For separating and positioning wires, inserting and adjusting wires and springs in hard-to-reach areas * For probing, cleaning, picking or marking small work surfaces * Heavy-duty locking screw chuck holds blades securely in place * Each blade is 5" long (127mm); OAL 7-1/2" - 8-1/2" (184mm - 216mm) with handle * Set Contains: * Twist Chuck Multi-Purpose Handle * 5" Extension blade * Straight * 35 Bend * 90 Bend * 180 Loop, Double Bend * 180 Hook Probes * Offset Pull Hook * 135 Pull Hook * Pull/Push Hook * Adjusting Pull/Push Hook * Placement Guide/Lifter * Packaged in a fitted zippered case for convenient and safe storage * Precision engineered 700 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 70962 2 707865 Zippered Case/Carded 707865 5-PIECE STAINLESS STEEL POSITIONING AND SPRING HOOK SET * Useful in a wide variety of mechanical and electrical functions * For separating and positioning wires, inserting and adjusting wires and springs in hard-to-reach areas * Heavy-duty locking screw chuck holds blades securely in place * Each blade is approximately 5" long (127mm); OAL 7-1/2" - 8-1/2" (184mm 216mm) with handle * Set Contains: * Twist Chuck Multi-Purpose Handle * Offset Pull Hook * 135 Pull Hook * Pull/Push Hook * Adjusting Pull/Push Hook * Placement Guide/Lifter * Holster included for convenient storage * Precision engineered 700 Series Versa-GripTM handle for maximum performance UPC NO. PKG. 75970 2 707863 Holster/Boxed 707863 * For the exact placement of oil or any other lubricant * For technicians, contractors, hobbyists and DIY'ers * Smooth actuator allows for greater control and placement of lubricant * Generous reservoir * Protective screw-on cover prevents leakage * All aluminum construction * Convenient pocket clip * For use with lubricants only UPC NO. OVERALL LENGTH 58900 2 589 5-5/8" (143mm) 589 MAGNETIC TORPEDO LEVEL * Quality crafted torpedo level with large reversible reading vials meets the accuracy requirements of professionals * Heat resistant, unbreakable endplates and internal aluminum frame * Readings possible from top, bottom or side positions * Magnetic working edge for use with metal surfaces * V-grooved working edge for use on pipes UPC NO. LENGTH 42698 7 839 9" "It's Your Job . . . General Tools Make It Easier" 839 T-113 SPECIALTY PRECISION OILER SPECIALTY TOOLS Voltage Detectors General's 3-IN-1 LED and LCD Stud, Voltage and Metal Detectors are ideal for locating studs, pipes, wire carrying voltage and hidden metal. Microprocessor control circuits make it easy to distinguish between battens/studs, metal pipes/tube or objects carrying voltage. An ideal for the DIY home owner, handyman, hobbyist as well a the professional. 81001 ZIP-TOP TOOL AND METER BAG, 16" WIDE * Moisture-resistant reinforced bottom * Steel frame mouth and rivet reinforced for rugged use and durability * Adjustable padded non-slip shoulder strap * Dimensions: 12"H x 16"W x 8"D (305 x 406 x 203mm) UPC NO. 01319 9 81001 TM TOOL BAGS 3-IN-1 LED STUD / VOLTAGE / METAL DETECTOR Ideal for Locating Studs, Pipes, Wires Carrying Voltage and Hidden Metal FEATURES: * Stud, Voltage and Metal Detection combined in one unit * 4-level low power consuming LED's indicate precise stud detection * Metal/Voltage Selector Switch provides accuracy in detecting hidden metal or wiring * Stud Detector can be operated with Metal or Voltage Detector simultaneously * Easy to distinguish between battens/studs, metal pipes/tubes or objects carrying voltage * No probe necessary MSV250 SPECIFICATIONS: Dimensions: 6.1"(L) x 2.6" (W) x 1.3"(D) (155 x 65 x 32mm) Weight: 6.3oz (178g) Power Source: 1 "9V" battery (not included) Includes: * User's Manual UPC NO. 01276 5 MSV250 SPECIALTY DIGITAL 3-IN-1 LCD STUD / VOLTAGE / METAL DETECTOR Ideal for Locating Studs, Pipes, Wires Carrying Voltage and Hidden Metal FEATURES: * Selectable Metal, Voltage and Stud detections or Auto Mode to perform 3 functions simultaneously * Micro-Processor Control Circuits provide precise and accurate detections * Results shown on LCD with buzzer * Multi-Scan-Level to pinpoint exact position * Battery status indicated on LCD * Auto Power OFF * Low power consumption * Ideal for the D. I.Y. Homeowner, Handyman, Hobbyist and Professional MSV350D T-114 SPECIFICATIONS: Dimensions: 6.1"(L) x 2.6" (W) x 1.3"(D) (155 x 65 x 32mm) Weight: 6.5oz (185g) Power Source: 1 "9V" battery (not included) Includes: * User's Manual UPC NO. 01275 8 MSV350D Toll Free 800-697-8665 * Fax 212-431-6499 * www.generaltools.com ALWAYS WEAR OSHA APPROVED SAFETY GOGGLES SPECIALTY TOOLS Auto Emergency Tool * Shatters automotive side windows for emergency escapes * High-visibility red flashing emergency light * Magnets hold the tool to the vehicle * Bright white LED flashlight helps you see at night * Safety blade cuts seat belts * Includes 3 "AAA" batteries in a convenient battery compartment UPC 79020 0 NO. 7902 PKG. Carded LED Flashlight Seat Belt Cutter Flashing Hazard Light Glass Breaker Easy Battery Access "It's Your Job . . . General Tools Make It Easier" T-115