Specialty Tools
Plumb Bobs
Pin Vises
Retrieving Tools
Tweezers
Holding Tools
Calipers
Micrometers
Meters
Magnifiers
Inspection
Mirrors
Magnetic Tools
Sweepers
Magnets
Knives
Carving Tools
Grommets,
Fasteners
Punches
Pliers
File Sets
Probe Sets
Levels
HEXAGON STEEL PLUMB BOBS
Made of hexagonal cold drawn steel and
nickel plated to prevent rust
Removable cord cap for 3/32" (0.094)
10' (3mm) long braided cord
SPECIALTY
T-80
The New “Measure ’N Mark” is a pocket pen with a
3 foot removable tape measure. A handy little pen
tool for those on the go. A Plumb Bob is a pointed,
tapered brass or steel weight which is suspended
from a cord for determining the vertical or plumb
line to a point on the ground. General’s Plumb Bobs
are available in a wide range of sizes and conform to
government specifications.
Measure ’N Mark/Plumb Bobs
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
800
309CD
BRASS PLUMB BOBS
Machined of solid brass, fully polished and
lacquered
Removable self-centering cord cap for easy
cord replacement. Cap used with 5/64"
(0.078) braided cord
Replaceable hardened steel point
Conforms to government specs GGG-P-501e
Now with extra string and tip
10' (3mm) long braided cord
Available in six sizes
UPC NO. WEIGHT (A) (B)
42624 6 800-8 8 oz. 4-1/2" (114mm) 1-3/16" (30mm)
42630 7 800-12 12 oz. 5" (127mm) 1-3/8" (35mm)
42633 8 800-16 16 oz. 5-3/4" (146mm) 1-1/2" (38mm)
42639 0 800-32 32 oz. 7-1/4" (184mm) 1-7/8" (48mm)
42641 3 800NP Replacement Point 10-33 Thread
A
B
A
B
UPC NO. WEIGHT (A) (B)
42612 3 790-5 5 oz. 3-3/8" (86mm) 3/4" (19mm)
42615 4 790-8 8 oz. 4" (102mm) 7/8" (22mm)
42618 5 790-12 12 oz. 4-1/2" (114mm) 1" (25mm)
790
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
309
POCKET PEN WITH
REMOVABLE TAPE MEASURE
3' (914mm) removable tape measure
Pen with comfort grip
Convenient pocket clip
Great for high-traffic areas like checkout
counters and end-cap shelving
Available only as a 15 piece counter display
UPC NO.
02126 8 309CD Countertop Display 15 pieces
(Sold only as a counter display -
see Page T-117 for display)
Patent Pending
ADJUSTABLE PIN VISE
Use for electronic assembling, tool-making,
model making and hobbies
Holds small drills, deburrers, wires, files,
reamers and other small tools
3-jaw hardened steel keyless chuck and
sturdy plastic handle
UPC NO. CAPACITY
41065 8 93 0.040 to 0.250"
1mm to 6.4mm
SPECIALTY
T- 8 1
ItsYourJob...General Tools Make It Easier”
General’s Pin Vises are useful for securely holding
small stock, taps, drills, reamers, scribers, wire, files
and other tools. The tool steel collets are hardened
and grip firmly when the screw chuck is tightened.
The Swivel Head Pin Vise is an exceptional tool for
precise work on models, instuments and jewelry.
Pin Vises
SPECIALTY TOOLS
C
UPC NO. RANGE (A) (B) (C)
41068 9 S94 Set of 4 sizes, A-D
41074 0 94A 0 to 0.055" (0 to 1.4mm) 3-1/8" (79mm) 5/16" (8mm) 3/16" (5mm)
41077 1 94B 0.025 to 0.075" (.6 to 1.9mm) 3-1/2" (89mm) 3/8" (10mm) 1/4" (6mm)
41080 1 94C 0.045 to 0.125" (1.1 to 3.2mm) 3-13/16" (97mm) 7/16" (11mm) 1/4" (6mm)
41083 2 94D 0.110 to 0.187" (2.8 to 4.8mm) 4" (102mm) 9/16" (14mm) 5/16" (8mm)
94A
S94
94B
94C
94D
SINGLE END PIN VISE SET
For holding small rods, wire, drills, taps
and other small tools
Tool steel collets are hardened and grip
firmly when screw chuck is tightened
Nickel plated body is hollow to permit
holding of long rods of wire
Available in individual sizes
Conforms to government specfications
GGG-V-412a
92
SWIVEL HEAD PIN VISE
An exceptional pin vise for precise work
on models, instruments and jewelry
Two double end collets made of hardened
tool steel
Has large freewheeling swivel head
Collets stored in handle
UPC NO. CAPACITY
41062 7 92 0.0 to 0.125"
0.0 to 3.2mm
B
A
3/8"
(10mm)
5/16" (8mm)
3-11/16" (94mm)
7/16"
(11mm)
3/8" (10mm)
3-5/8" (92mm)
5-3/4" (146mm)
DOUBLE END PIN VISE
Each end has a double end collet which
may be reversed to desired size
Nickel plated body is hollow to permit use
of long wire or rods
Collets stored in handle
Holds a variety of small tools for fine detail
work
UPC NO. CAPACITY
41058 0 90 0.0 to 0.0125"
0.0 to 3.2mm
90
93
1"
(25mm)
1850
SWIVEL VACUUM VISE
This popular vise grips firmly to glass, metal,
laminate, fiberglass, or any smooth non-
porous surface with quick lever action
Universal ball joint swivels 360° to any
position and tilts 90° to any angle
V-grooved hardened steel jaws are 3" wide
and open to 2-5/8"
Furnished with slide-on rubber jaws for
fragile work
Folds for storage
BASE OVERALL
UPC NO. SIZE HEIGHT WEIGHT
43960 4 1850 6-1/4" 6-1/4" 5 lbs.
triangular
ADJUSTABLE FILE/TOOL HANDLE
For holding files, reamers, hacksaw blades
and other tang handled tools
Exclusive steel parallel clamping jaws grip
the entire length of the inserted tang to
prevent slipping
Large, quick adjusting knurled knob ensures
positive locking
Rustproof handle with steel parts
Conforms to government specifications
NN-H-0085
UPC NO.
43666 5 890
4-1/8" (105mm)
1-1/16"
(27mm)
890
SPECIALTY
T-82
The new Lighted Mechanical Pick-Ups allow you to
retrieve items from dark, hard to reach places. The
powerful LED light sheds a beam of light on your
subject. The strong 4-prong steel jaws allows you to
retrieve small items. The shaft comes in 3 different
lengths, 12", 24", and 36".
Mechanical Pick-Ups
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
9/32"
(7mm)
4-1/2" (114mm)
1/2"
(12mm) 9/32" (7mm)
4-1/2" (114mm)
388
396
MECHANICAL PICKUP
Strong four prong steel jaws retrieve small
items from hard-to-reach places
Smooth actuator for greater control
Chrome finish to prevent rust
Flexible shaft to avoid obstacles
UPC NO.
22145 2 396
24" (610mm)
LIGHTED MECHANICAL PICK-UPS
Retrieve items from dark/hard-to-reach
places
Push On Powerful LED light
Continued push opens retrieval claw
Comfortable ergonomically designed
hand controls
Flexible shaft
Strong spring steel retrieval claw
Power Source: 3 “LR41” batteries (included)
UPC NO.
70399 6 70393 12" OAL
26003 1 70396 24" OAL
70393 4 70399 36" OAL
LR41 replacement battery
70393
70396
70399
TELESCOPING ALLIGATOR CLIP
Ideal for lighting pilot lights and barbeques
Jaw capacity: .170" (4.30mm)
Chrome finish to prevent rust
Convenient pocket-clip
UPC NO.
42217 0 400
400
5/16"
(8mm)
6-1/4" (159mm) Closed
24-1/2" (622mm) Extended
MINI MECHANICAL PICKUP
Strong four prong steel jaws retrieve small
objects up to 1/2" (12mm)
Knurled body with tapered point for hard-to-
reach work areas
Smooth traveling plunger actuator
for greater control
Chrome finish to prevent rust
Can be used as a screw starter
UPC NO.
42214 9 388
SPECIALTY
T- 8 3
ItsYourJob...General Tools Make It Easier”
Utility Tweezers are used by mechanics, crafts-
people and hobbyists where value is desired. The
Nut Starter and Screw Starters are used for starting
and removing nuts and screws in hard-to-reach
places. They can also be used when nuts and screws
are too small to be held by hand while being
threaded.
Tweezers
SPECIALTY TOOLS
SIX-PIECE TWEEZER SET
Consists of six tweezers for home and
industrial use
One each of Nos. 401XX, 403, 412, 414,
415, 417
In clear vinyl pouch
UPC NO.
42309 2 C421
NUT STARTER
For starting or removing threaded nuts in
hard-to-reach areas. Can also be used when
nuts are too small to be held by hand while
being threaded
Easy-to-use spring steel chuck will hold
nut sizes from 3-48 thread
(3/32" or 2.5mm) to 5/16" (8mm)
Knurled aluminum handle
UPC NO.
42682 6 8081
SLOTTED SCREW STARTER
For starting or removing slotted screws in
hard-to-reach areas. Can also be used when
screws are too small to be held by hand
while being threaded
Spring loaded steel chuck holds slotted
screws from No. 3 to 7/16" sizes
Knurled aluminum handle
UPC NO.
42684 0 8082
For starting or removing cross point screws
in hard-to-reach areas. Can also be used
when screws are too small to be held by
hand while being threaded
Easy-to-use spring steel chuck holds screws
from No. 6 to 1/4" size
Knurled aluminum handle
UPC NO.
42686 4 8083
CROSS POINT SCREW STARTER
INDIVIDUAL STYLES
OF UTILITY TWEEZERS
UPC NO. POINT STYLE LENGTH
42291 0 414 Blunt serrated 6-1/2"
(self closing)
42294 1 415 Curved 6-1/2"
42297 2 416 Spade 4-1/2"
TWEEZER MAGNIFIER
Useful for detailed projects
5-power lens
Stainless steel tweezer
Double hinged adjustable arm
Durable plastic handle and frame
Finely ground points
Length 2-1/4" (57mm)
UPC NO.
42258 3 425
UTILITY TWEEZERS. Utility tweezers for mechanics, craftspeople and hobbyists
414
416
415
423-3
423-3C
SWISS PATTERN TWEEZERS
Light tension and hardened points for
subminiature assemblies
Stainless steel construction
Finest quality precision points
UPC NO. POINT STYLE LENGTH
42249 1 423-3 Very fine 4-5/8"
42251 4 423-3C Very fine 4-1/8"
C421
425
5" (127mm)
5/16" (8mm)
8083
8082
5-1/8" (130mm)
5/16" (8mm)
8081
5" (127mm)
5/16" (8mm)
Shed Some Light On Your Subject
Bent Tip
No. 70408
Pointed Tip
No. 70401
1
2
3
4
5
Lighted Tweezers
Push On /
Push Off
Powerful
LED Light
1
Non-Slip
Comfort
Grips
2
Heat
Treated
Steel
3
Serrated
Blunt Tips
6.25" (159mm)
No. 70403
Serrated
Bent Tips
6.5" (165mm)
No. 70408
Smooth
Pointed Tip
6.25" (159mm)
No. 70401
5
Corrosion
Resistant
Non-Glare
Black Finish
4
Includes 3 “LR41” batteries
1
2
3
4
5
Push On
Powerful
LED Light
1
Continued
Push Opens
Retrieval Claw
2
Comfortable
Hand Controls
3
Corrosion
Resistant
Black Finish
5
FLEXI-SHAFTTM
Lighted
Mechanical
Pick-Up
No. 70393
12" (305 mm)
No. 70396
24" (610 mm)
No. 70399
36" (914 mm)
4
Includes
3 “LR41”
batteries
6
6
Strong Retrieval
Claw Can Grasp
Objects Up To
1" (52mm)
Blunt Tip
No. 70403
24" Lighted
Mechanical Pick-up
FLEXI-
SHAFTTM
with Lighted Tweezers and Lighted Mechanical Pick-Up
Shed Some Light On Your Subject
with Lighted Tweezers and Lighted Mechanical Pick-Up
No. 70400
3 Piece Set
70401, 70403,
70408
No. 70402
2 Piece Set
70401, 70408
T-84
SPECIALTY
T- 8 5
ItsYourJob...General Tools Make It Easier”
The new Lighted Tweezers allow you to retrieve
items from dark, hard-to-reach places. The powerful
LED light allows you to put the light exactly where
you need it. Ideal for electronics, computer,
instrument, radio and other small or sub-miniature
assembly, servicing and repairs. Available in three tip
configurations.
Tweezers
SPECIALTY TOOLS
INDUSTRIAL TWEEZERS. General’s quality tweezers for toolmakers, repairmen, electronic assemblers and other professionals
INDIVIDUAL STYLES
OF INDUSTRIAL TWEEZERS
UPC NO. POINT STYLE LENGTH
42263 7 401XX Strong sharp 4-1/2"
42266 8 403 Blunt serrated 6"
42271 2 408 Sharp bent 4-1/4"
42280 4 410 Narrow sharp 4-1/4"
401XX
403
408
410
Smooth Point Tip
Serrated Bent Tip
70401
70403
70408
LIGHTED TWEEZERS
Now, put the light exactly where you need it!
Push ON/Push OFF powerful LED light
Non-slip comfort grip
Heat treated steel
Corrosion resistant non-glare black finish
Tweezers are approximately 6.25" (159mm) long
Sets come with heavy-duty
Ballistic nylon carrying case
Power Source:
3 “LR41” batteries
per tweezer (included)
UPC NO.
26004 8 70401 Smooth Point Tip
26005 5 70403 Serrated Blunt Tip
26006 2 70408 Serrated Bent Tip
70402 3 70402 (2 pc. set) 70401, 70408
70400 9 70400 (3 pc. set)
70401, 70403, 70408
70400
70402
401AA
BOLEY PATTERN TWEEZER
A fine quality tweezer for jewelers, watch-
makers, instrument assemblers and crafts-
people
For radio, television and other repairs
UPC NO. POINT STYLE LENGTH
42240 8 401AA Strong bevel 5"
PRECISION TWEEZERS. For electronic, computer, instrument, radio and other small or subminiature assembly, servicing and repairs
Serrated Blunt Tip
From the Hobbyist
to the Technician and
Measuring Everything
in Between
Fractions
Inches
Metric
Specifications:
Range:
No. 1433 (3")
0 - 3" (0-76mm)
No. 146 (6")
0 - 6" (0 - 150mm)
Accuracy:
No. 1433 (3")
+/- 0.005", +/- 0.1mm
No. 146 (6")
+/- 0.008", +/- 0.2mm
Resolution:
0.0005"
0.01mm
1/64"
Repeatability:
0.0005"
0.01mm
1/64"
TM
2 Sizes Now Available
3" (76mm) / 6" (150mm)
3" Fraction+ Caliper
Clips into Your Pocket
Convenient Auto
On/Off Feature
3 Mode Digital Display
No. 146 (6")
No. 1433 (3")
Light Weight Non-Marring
Carbon Fiber Construction
T-86
T- 8 7
ItsYourJob...General Tools Make It Easier”
Fraction+Calipers
SPECIALTY TOOLS
6" (153mm) range
Lightweight, non-marring carbon fiber
composite
Convenient auto-off feature
Three mode digital display: Decimal
Inches,
Fractions, Metric
Inside, outside, depth & step measurements
Accuracy: +/- 0.008", +/- 0.2mm
Resolution: 0.0005", 0.01mm, 1/64"
Power Source: 1 “SR44” (1.5V) battery
(included)
UPC NO. RANGE
01460 3 146 0 - 6" (0 - 153mm)
SR44 replacement battery
6" CARBON FIBER
DIGITAL FRACTIONAL CALIPER
No. 146 Digital Display
1433
3" (76mm) range
Lightweight non-marring carbon fiber
composite
Convenient auto-off feature
Three mode digital display: Decimal Inches,
Fractional and Metric
Convenient pocket clip
Inside, outside, depth & step measurements
Accuracy: +/- 0.005", +/- 0.1mm
Resolution: 0.0005", 0.01mm, 1/64"
Power Source: 1 “SR54” (1.5V) silver oxide
battery (included)
UPC NO. RANGE
01433 7 1433 0 - 3" (0 - 76mm)
3" CARBON FIBER
DIGITAL FRACTIONAL CALIPER
6", 8" & 12"
STAINLESS STEEL
DIGITAL FRACTIONAL CALIPERS
No. 1433 Digital Display
146
No. 147 Digital Display
147
6" (153mm) range
Heavy-duty stainless steel construction
Convenient auto-off feature
Three mode digital display: Decimal Inches,
Fractions, Metric
Inside, outside, depth & step measurements
Accuracy: +/- 0.001", +/- 0.02mm
Resolution: 0.0005", 0.01mm, 1/64"
Power Source: 1 “SR44” (1.5V) battery
(included)
UPC NO. RANGE
01470 2 147 0 - 6" (0 - 153mm)
01478 3 1478 0 - 8" (0 - 203mm)
14712 7 14712 0 - 12" (0 - 305mm)
The Famil
y
SPECIALTY
SPECIALTY
T-88
General’s high quality, easy-to-read Dial Calipers
give precise readings Inside, Outside, Depth and
Step measurements. The 6" Plastic Dial Caliper is
made of fiberglass reinforced plastic and gives
precision measurements at an economical price.
The 6" Dial Caliper is a stainless steel construction for
greater accuracy and durability.
Dial Calipers
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
Fiberglass reinforced plastic gives
precision measurements at an
economical price
Measuring capacity 0 to 6"
Contrasting color coded dial is graduated in
.01" and 64ths with inch and mm on bar
scale
No-glare easy-to-read dial with adjustable
bezel
Inside, outside, depth and step
measurements
Freewheeling friction roller for
repetitive and accurate readings
Fractional conversion table
on back
UPC NO.
44145 4 142
6" PLASTIC, DIRECT READING DIAL CALIPER
142
6" DIAL CALIPER
Stainless steel construction for accuracy and
durability
Large, clear dial accurately
readsto.001"
Satin chrome scale with clearly etched
tenths of inch graduations
Covered rack ensures smooth operation by
preventing dirt and chips from entering rack
and gear mechanism
Inside, outside, depth and step
measurement
Lock for repetitive measurement
Free wheeling thumb roller
Depth stop rod
Adjustable bezel for zero setting
UPC NO.
10700 8 107
107
DIAL CALIPER AND MARKING SET
This set contains three of the most useful
measuring and marking tools for mechanics
and machinists
Set includes: 6" Dial Caliper; 6" x 3/4"
Stainless Steel Rule with satin finish and
reversible Tip Carbide Scriber with magnetic
pick-up
Rule has etched and filled 4 graduations
(1/8", 1/16", 1/32", 1/64")
Scriber has aluminum body with knurled
handle with an overall length of 4-3/4"
Caliper has inside, outside, depth and step
measurements
Caliper has lock for repetitive measurement
Caliper has free wheeling thumb roller
Packaged in a sturdy, fitted, plastic case
designed specifically for this set
UPC NO.
10800 5 108
108
Capacity 0 to 6"
Readings in .001"
Single revolution of dial is .100"
Resolution .001"
6" scale is graduated in tenths/mm
Non-glare dial with adjustable bezel
Packed in reusable plastic hang-up case
Inside, outside, depth and step
measurements
Freewheeling friction roller for
repetitive and accurate readings
UPC NO.
44150 8 145
6" PLASTIC DIAL CALIPER, THOUSANDTHS READING, SINGLE REVOLUTION
145
Capacity 0 to 150mm by 0.1mm
Accurately graduated dial has direct read-
ings in metric 0.1mm
Complete with instructions and reusable
plastic hang-up case
Inside, outside, depth and step measure-
ments
Freewheeling friction roller for
repetitive and accurate readings
UPC NO.
44148 5 144MM
144MM
PLASTIC, METRIC DIAL CALIPER
SPECIALTY
T- 8 9
ItsYourJob...General Tools Make It Easier”
Slide Calipers come in different styles - Electronic
Digital Calipers, Mechanical Dial Calipers, Vernier Cali-
pers and Plain Slide Calipers.
General’s all-purpose
Slide Calipers, sized to slip into your pocket, can
make quick, accurate, inside and outside diameter
measurements. General’s Utility Micrometer is a
practical and economical measuring device for
beginners as well as hobbyists.
Calipers/Micrometers
SPECIALTY TOOLS
722
Graduated in mm and 16ths of an inch with
vernier reading of .1mm and 1/128"
Economical steel vernier calipers have 5"
(125mm) capacity
Inside and outside jaws and full length
depth gage
Caliper has inside, outside depth and step
measurement
Caliper has lock for repetitive
measurement
Friction roller adjustment
Slide lock for gaging
UPC NO.
42577 5 722
METRIC AND ENGLISH VERNIER CALIPER
132ME
POCKET CALIPER
Stainless steel slide caliper with inside and
outside readings in metric and inches
Decimal equivalents on back
Scale has etched and filled graduations
3" (76mm) capacity
UPC NO. GRADS
44136 2 132ME 32nds and mm
4-INCH SLIDE CALIPERS
Stainless steel caliper with inside and
outside readings in 16ths and 32nds
Decimal equivalents table on back
Scale has etched and filled graduations
4" (102mm) capacity
UPC NO. GRADS
42581 2 729 16ths and 32nds
42594 2 729ME mm and 16ths
729
POCKET CALIPER
Precision made high strength, fiberglass
reinforced plastic caliper
Opens to 3" (76mm) outside measurement
capacity
4" (102mm) rule graduated in 16ths on back
Inside and outside readings graduated in
32nds and mm
UPC NO. GRADS
44139 3 141ME 32nds and mm
141ME
102
UTILITY MICROMETER
A practical and economical measuring
device for beginners and hobbyists
Well-suited for use in training programs,
general toolroom and machine shop use and
automotive work
Accuracy guaranteed to .001"
Special wrench is included for simple zero
adjustments
Ground and polished carbide
measuring faces
Engraved graduations on barrel
Lock for repetitive measurement
UPC NO. RANGE INCLUDES
44103 4 102 0" to 1"
SPECIALTY
T-90
The Precision Measuring Kit contains four of the most
useful measuring and marking tools for mechanics
and machinists: Micrometer, Dial Caliper, 6" Steel
Rule and Carbide Scriber. The Marking Kit contains a
6" Steel Rule, Magnetic Pick-Up, Automatic Center
Punch and Scriber.
Measuring/Marking Kits
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
S004
PRECISION MEASURING KIT
This kit contains four of the most use-
ful measuring and marking tools for
mechanics or machinists
Kit includes: No. 102, 0 to 1" micro-
meter; No. 145, 0 to 6" thousandths
reading dial caliper; No. 676, 6" rigid
stainless steel rule graduated in 8ths,
16ths, 32nds, and 64ths; No. 88CM,
tungsten carbide scriber with magnet-
ic pickup
Packaged in sturdy, fitted, blow molded
case designed specifically for these tools
Instructions and conversion table (fractions
to decimals to millimeters) included
UPC NO.
34106 8 S004
POCKET PROTECTOR
TOOL/MARKING KIT
This handy pocket size tool kit is designed
for the mechanic, machinist or hobbyist
The kit contains four of General’s best
selling tools: No. 300/1, 6" rule;
No. 383NX, telescoping magnetic pickup;
No. 87, automatic center punch and
No. 88, scriber
All tools packaged in vinyl pocket protector
which can be snapped closed
UPC NO. KIT INCLUDES ONE EACH:
34112 9 S008 6" rule, magnetic pickup,
automatic center punch,
scriber
PLUNGER DIAL INDICATOR
Large 2-1/4" (57mm) diameter dial indicator
•Accuracyto.001"
Dial is continuous and may be rotated
for setting at any point
Full 1" travel
Revolution accumulator counter
Direct decimal two-way reading
left and right
Adjustable limit indicators
Lug mount standard
UPC NO. READINGS
10900 2 109
0 to .001" by .001"
109
SPECIALTY
T- 9 1
ItsYourJob...General Tools Make It Easier”
General’s NEW LumiLENSLighted Magnifier puts the
light directly on your subject to be viewed. With its
powerful extra bright LED light you will never be left
in the dark again. Two lens magnifications,
3x and 6x, as well as an integrated stand for Hands-
Free use make this tool a must in laboratory quality
control, inspection and assembly functions.
Magnifiers
SPECIALTY TOOLS
800543
LIGHTED MAGNIFIER
Push On / Push Off Powerful LED light
Contoured Handle for Handheld Use
Integrated Stand for Hands-Free Use
Shatter-Resistant Lens
3-1/2" Lens Diameter (89mm)
3X Magnification (6X Inset lens)
Power Source: 2 “AA” batteries (included)
UPC NO.
26001 7 800543
553
Handy 4 power magnifier has plastic body
and lens
Power Source: “AAA” batteries and
No. 222 bulb (included)
UPC NO. POWER
42456 3 553 4
4 POWER POCKET ILLUMINATED MAGNIFER
4" ILLUMINATED MAGNIFIER
4" diameter with 3 power lens covers
large areas of print
5 power bifocal lens insert gives even
greater magnification
Bulb gives wide circle of illumination
Plastic body and optical plastic lens
Power Source: 2 “C” batteries (included)
FOCAL
UPC NO. POWER LENGTH
42462 4 554 3.0 3-1/3"
Bifocal 5.0 2"
554
3x Magnification, 6x Inset Lens Extra-Bright LED
Hands-Free Use
SPECIALTY
T-92
General’s Magnifiers are used by toolmakers, jewel-
ers, instrument assemblers, laboratory technicians,
engineers, mechanics and inspectors who need
sharp clear magnification without eyestrain. These
magnifiers are designed for demanding jobs in lab-
oratory quality control, inspections and assembly
functions. The Illuminated Magnifiers are of the
highest optical quality and offer fine resolution.
Magnifiers
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
2" MAGNIFIER
Economical and versatile magnifier for lab-
oratory and industrial uses, for do-it-your-
selfers, mechanics and inspectors
2" diameter with 4 power lens
Lightweight, durable 1-piece molded
plastic frame
FOCAL
UPC NO. POWER LENGTH
42414 3 538 42"
538
565
Lens measures 2" x 4" for distortion-free
magnification of large areas
Reversible light reflector adapts for right-
or left-hand use
2.5 power shatterproof lens, with 5 power
bifocal insert
Replaceable bulb and 2 “AA” batteries
are included
FOCAL
UPC NO. POWER LENGTH
42509 6 565 2.5 4"
Bifocal 5.0 2"
RECTANGULAR ILLUMINATED MAGNIFIER
ULTRATECHGLASS MAGNIFIERS
Polished optical glass lens with a metal frame
Versa-GripHandle with non-slip cushion grip
Full range of sizes from 2" (50mm) to 4-1/2" (115mm)
Round lens is distortion free
A powerful magnifier for working in confined or obstructed spaces
Designed for demanding jobs in laboratory quality control,
inspection and assembly functions
Used by engineers, mechanics, inspectors, lab technicians,
toolmakers, instrument assemblers, jewelers, do-it-yourselfers,
hobby and crafts people
FOCAL
UPC NO. DIAMETER POWER LENGTH
00540 3 700540 2" (50mm) 1.6 6"
50541 5 750541 2-1/2" (65mm) 1.6 6"
50542 2 750542 3" (75mm) 1.6 6"
50543 9 750543 3-1/2" (90mm) 1.25 8"
50544 6 750544 4" (100mm) 1.25 8"
50545 3 750545 4-1/2" (115mm) 1.25 8"
750545
1050
Epoxy coated steel rod stand has adjustable lens
for factory, industrial and hobby use
Illumination: 7 watt bulb
6 ft. cord plugs into 110-120V AC. UL listed
Big lens - 4" (102mm) diameter
Small lens - 0.8" diameter
3x magnifier with 6x spot lens
UPC NO. POWER
43750 1 1050 3x (Big lens)
6x (Small Lens)
ADJUSTABLE ILLUMINATED MAGNIFIER
700540
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
SPECIALTY
T- 9 3
ItsYourJob...General Tools Make It Easier”
General’s Magnifiers are used by toolmakers, jewel-
ers, instrument assemblers, laboratory technicians,
engineers, mechanics and inspectors who need
sharp clear magnification without eyestrain. These
magnifiers are designed for demanding jobs in lab-
oratory quality control, inspections and assembly
functions. Our magnifiers are of the highest optical
quality and offer fine resolution.
Magnifiers
SPECIALTY TOOLS
EYE LOUPE
For toolmakers, jewelers, instrument assem-
blers and others who need sharp, clear
magnification without eyestrain
Clear optical glass lens is ground and
polished
1" diameter lens
FOCAL
UPC NO. POWER LENGTH
42339 9 527 5.0 2"
527
532
2.5 POWER POCKET MAGNIFIER
Has 2.5 power ground and polished optical
glass
Folds into case for storage
FOCAL
UPC NO. POWER LENGTH
42400 6 532 2.5 Simulated 4"
Black Leather case
536
533
FOLDING POCKET MAGNIFIERS
Fine quality magnifiers for laboratory techni-
cians, engineers, mechanics and inspectors
Case and lens rims are made of black
molded plastic
Available in single lens and double lens
models
IND. TOT. LENS FOCAL
UPC NO. MOD. POW. POW. DIA. LENGTH
42403 7
533
Sing. 4.0 4.0 1" 2.5"
42409 9
536
Dble. 4.0 8.0 1" 1.25"
42412 9
537
Dble. 3.0 6.0 1-1/4" 1.6"
BINOCULAR MAGNIFIER
For assemblers and inspectors of electronic and
other small or subminiature parts, toolmakers,
jewelers and engravers
Leaves hands free to work
Ground and polished optical lenses eliminate
eyestrain
Tilt-up lens frame
Fits over prescription glasses
FOCAL
UPC NO. POWER LENGTH
43734 1 950-5 2.25 8"
950
SPECIALTY
T-94
The Mini-Light has an LED light bulb which has a life
of 100,000 hours of continuous use. These lights
require 4 “LR41” batteries which have a life of
48 continuous hours. The Mini’s come with either
a telescoping handle which extends up to
28-3/4" (720mm) or with an alligator clip which
clips on anything, anytime, anywhere for instant,
direct light.
Mirrors/Mini Lights
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
Adjustable 3-1/2" x 2" oblong glass inspection
mirror mounted to a permanent magnet
Attaches to any steel or iron machine,
tool, appliance or other equipment
Has wing nut ball joint adjustment
UPC NO.
42475 4 MB560
MAGNETIC BASE INSPECTION MIRROR
MB560
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
“LITE-IT” CLIP-ON MINI-LIGHT
Clips on to anything, anytime, anywhere for
instant, direct light
Light is fastened to a rugged high-impact
ABS plastic Alligator Clip with a double ball
joint that adjusts to any angle
4 Alkaline, “LR41”, batteries with a battery
life of 48 continuous hours
LED bulb has a life of 100,000 hours
of continuous use
UPC NO. PKG.
58001 6 580 Carded
TELESCOPING MINI-LIGHT WITH MAGNETIC PICK-UP
Mini Light with 2 lb. Neodymium Magnetic
pick-up are both fastened to a stainless
steel telscoping wand molded into a
rugged high-impact ABS plastic handle
Telescopes from 7-3/4" 28-3/4"
(197mm 720mm)
4 Alkaline, “LR41”, batteries with a battery
life of 48 continuous hours
LED bulb has a life of 100,000 hours of
continuous use
Has a 2 lb. smooth surface pull capacity
Neodymium donut magnet
Precision engineered 750 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
75966 5 759581
Carded
75967 2 759582
Carded
580
759582
TELESCOPING MINI-LITE WITH MAGNETIC PICK-UP
A powerful permanent magnetic
pick-up tool
Ideal for retrieving steel and iron parts from
hard-to-reach and see work areas
Magnet is fitted in a 5-1/2" (140mm) long
ergonomically designed handle
4 Alkaline, “LR41”, batteries with a
battery life of 48 continuous hours
Light Bulb has a life of 100,000 hours of
continuous use
Mini-Light is fastened to a chrome plated
brass wand with a double ball joint
Ball and socket feature for simple,
positive adjustments
UPC NO. PKG.
05820 1 582 Carded
582
759563
2-1/2" ROUND TELESCOPING
3X POWER MAGNIFYING MIRROR
For the inspection of obstructed and hard
to see objects
High quality 2-1/2" (64mm) diameter
magnifying glass mirror improves visibility
High strength corrosion resistant stainless
steel wand extends from 8-1/2" to 29"
(216mm 737mm)
Precision engineered 750 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
75959 7 759563 Carded
21/2"
Diameter
SPECIALTY
T- 9 5
ItsYourJob...General Tools Make It Easier”
Inspection Mirrors facilitate inspection of
inaccessible workpieces and machines by
toolmakers, assemblers, inspectors and mechanics.
Fully polished mirrors are enclosed in plated holders
which are attached to knurled handles with ball and
socket joints. Telescoping arms and vinyl cushion
grip handles are offered on some mirrors.
Inspection Mirrors
SPECIALTY TOOLS
558
560
570
557
577
555
GLASS INSPECTION MIRRORS
These mirrors facilitate inspection of inaccessible workpieces
and machines by toolmakers, assemblers, inspectors and
mechanics
Fully polished glass mirrors are enclosed in plated holders
which are attached to knurled handles with ball and
socket joints
Nos. 557, 577, 560, and 570 have telescoping arms
and vinyl cushion grip handles
UPC NO. SIZE OVERALL LENGTH
42465 5 555 1-1/4" dia. 8"
42468 6 557 2-1/4" dia. 10-1/2", extends to 15"
42471 6 558 1" x 2" oval 9"
42473 0 560 3-1/2" x 2" 11-1/2", extends to 16"
oblong
ACRYLIC PLASTIC INSPECTION MIRRORS
UPC NO. SIZE OVERALL LENGTH
42480 8 577 2-1/4" dia. 10-1/2" 15"
42477 8 570 3-1/2" x 2" 11-1/2" 16"
REPLACEMENT MIRRORS WITH FRAMES
UPC NO.
42478 5 557RMF for No. 557
42484 6 560RMF for No. 560 and No. MB560
5561
80560
Includes plastic protective sheath
Heavy-duty construction
METAL INSPECTION MIRRORS
Handle has black cushion grip
Non-slip grip
Mirror size: 2" diameter
36" telescoping
UPC NO.
05590 3 559
LONG TELECSCOPING
INSPECTION MIRROR
2 Extra bright LED lights facilitate the
inspection of hard-to-see and hard-to-reach
areas
Ideal for toolmakers, machinists,
inspectors and mechanics
Fully polished glass mirror is
shatter-resistant
2 “CF2032” batteries included
360º Swivel double ball joint
TELECSCOPING LIGHTED INSPECTION MIRROR
5562
5563
559
UPC NO. SIZE OVERALL LENGTH
05531 3 5561 1-1/4" x 2" 9-3/4", extends to 26"
05562 0 5562 2" x 3-3/4" 10-3/4", extends to 26"
05563 7 5563 3-3/4" dia. 9-3/4", extends to 26"
UPC NO. SIZE OVERALL LENGTH
02146 5 80560 2" x 3" 12-1/4", extends to 33"
SPECIALTY
T-96
Inspection Mirrors
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
709575
1-1/2" ROUND PLASTIC
TELESCOPING MIRROR
For the inspection of obstructed and hard
to see objects
High performance 1-1/2" (38mm) diameter
Lexanmirror resists scratching and
shattering
High strength corrosion resistant stainless
steel wand extends from 7-5/8" to 28"
(194mm 711mm)
Precision engineered 750 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
75957 3 759575 Carded
2" X 3" RECTANGULAR PLASTIC
TELESCOPING MIRROR
For the inspection of obstructed and hard
to see objects
High performance 2" x 3" (51mm x 76mm)
rectangular Lexanmirror resists scratching
and shattering
High strength corrosion resistant stainless
steel wand extends from 9-1/4" to 30"
(235mm - 762mm)
Precision engineered 750 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
75950 4 759570 Carded
1-1/2" ROUND PLASTIC,FIXED
LENGTH, INSPECTION MIRROR
For the inspection of obstructed and hard
to see objects
High performance 1-1/2" (38mm) diameter
Lexanmirror resists scratching and
shattering
High strength stainless steel shaft
resists corrosion
Overall length is 8" (203mm)
Precision engineered 700 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
70972 1 709575 Carded
11/2"
11/2"
DOUBLE BALL JOINT
CONNECTION PERMITS
INFINITE ANGLE
ADJUSTMENTS
RUGGED
HIGH IMPACT
ABS PLASTIC
HANDLE
ROTATING
CAP FACETS
FIT PALM
HIGH STRENGTH
CORROSION RESISTANT
STAINLESS STEEL
TELESCOPING WAND
EIGHT SIDED
CUSHION GRIP
HAS A NON-SLIP
SURFACE
ERGONOMICALLY DESIGNED
HANDLE WITH CONTOURED
HEAD FOR GREATER
CONTROL AND COMFORT
759575
759570
UTILITY TELESCOPING INSPECTION MIRRORS
These mirrors facilitate inspection of inaccessible work
pieces and machines by toolmakers, assemblers, inspectors
and mechanics
Fully polished mirrors are enclosed in plated holders which
are attached to handles with a double ball and socket joint
Double ball and socket joints adjust to any angle
Nos. 70557 have telescoping arms and vinyl cushion grip
handles
OVERALL
UPC NO. SIZE LENGTH
22344 9 70555 1-3/8" dia. 5" extends
to 27-1/2"
22347 0 70557 2-1/4" dia. 9-3/4" extends
to 14-3/4"
70555
70557
Inspection Mirrors facilitate inspection of
inaccessible workpieces and machines by
toolmakers, assemblers, inspectors and mechanics.
Fully polished mirrors are enclosed in plated holders
which are attached to ergonomically designed
handles with ball and socket joints.
SPECIALTY
T- 9 7
ItsYourJob...General Tools Make It Easier”
Inspection Sets
SPECIALTY TOOLS
759905
TELESCOPING INSPECTION SETS
Stainless Steel Speed-Chuckand telescoping wand
combination provides quick and limitless inspection
and retrieval solutions
Ergonomically designed handle with contoured head
for greater control and comfort
Handle telescopes from 6-3/8" (163mm) to 26"
(660mm)
Spring-loaded Speed-Chuckallows blade changes
instantly
All attachments are fastened to a stainless steel
Speed-Chuckadapter with a double ball joint,
adjusts to any angle
Precision Locking System firmly holds blades in place
Available attachments:
Neodymium magnets: 2 lb., 5 lb. and 10 lb. smooth
surface pull capacities Mirrors & Magnifiers: 1-1/2"
(38mm) diameter 2" x 3" (51mm x 76mm) rectangular
mirror 2-3/8" (60mm) dia. 3x power magnifying mirror
2-1/2" (64mm) dia.
3x power magnifier;
Alligator clip Mini-Lite
All sets are securely and
safely protected within
a fitted zippered case
3-PIECE TELESCOPING
“SPEED-CHUCK INSPECTION SET
Set includes: 26" stainless steel
telescoping wand with Speed-Chuck
handle 2 lb. magnetic pick-up
1-1/2" round plastic mirror Mini-Lite
Batteries included
Precision engineered 750 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
75960 3 759903 Zippered Case/Boxed
Set includes: 26" stainless steel telescoping wand with
Speed-Chuckassembly 5 lb. magnetic pick-up
2" x 3" rectangular plastic mirror
3x power magnifier, alligator clip Mini-Lite. Batteries included
Precision engineered 750 Series Versa-Griphandle for maximum
performance
UPC NO. PKG.
75961 0 759905 Zippered Case/Boxed
5-PIECE TELESCOPING
“SPEED-CHUCK INSPECTION SET
759903
759909
9-PIECE TELESCOPING
“SPEED-CHUCK INSPECTION SET
Set includes: 26" stainless steel telescoping
wand with Speed-Chuckassembly
2 lb., 5 lb. and 10 lb. magnetic pick-ups
1-1/2" round mirror 2" x 3" rectangular
mirror 2-1/2" round glass magnifying mirror
3x power magnifier, alligator clip
Mini-Lite Batteries included
Precision engineered 750 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
75962 7 759909 Zippered Case/Boxed
TELESCOPING MAGNETIC PICK-UPS
759383
759394
759398
High powered 2 lb., 5 lb., 10 lb. Neodymium
magnets are 6 times stronger than standard
Cobalt magnets
Double ball joint connection permits
infinite angle adjustments
High strength corrosion resistant stainless
steel wand extends from 6-1/2" - 27"
(165mm 686mm)
Magnet holder is constructed of high-
strength reinforced nylon
Precision engineered 750 Series Versa-Grip
handle for maximum performance
UPC NO. PULL PKG.
75933 7 759383 2 lb. Carded
75958 0 759394 5 lb. Carded
75939 9
759398 10 lb. Carded
SPECIALTY
T-98
Magnetic Retreiving Tools
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
FIXED LENGTH MAGNETIC
PICK-UP, 2 LB. PULL
709392
Has a 2 lb. smooth surface magnetic pull
capacity with an overall length of 6-3/4"
(171mm)
High strength stainless steel shaft resists
corrosion
Durable ball joint connection permits infinite
angle adjustments
High powered Neodymium Magnet is
6 times stronger than standard Cobalt
Magnets
Magnet holder is made of high-strength
reinforced nylon
Precision engineered 700 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
70972 1 709392 Carded
384N FLEX-O-STIFF MAGNETIC PICKUP
An ideal tool for retrieving steel parts from
hard-to-reach places
High-powered neodymium magnet is six
times more powerful than standard magnet
Permanent magnetic power
Magnet is fitted into an 18" (457mm) nickel
plated holder, which can be extended to a
32" (813mm) flexible retriever
UPC NO. MAGNET PULL
42210 1 384N NEO 2 lb. pull
392
An excellent tool for retrieving small steel
parts from hard-to-reach places
High-power neodymium magnet lifts up
to two pounds and will never lose its
magnetism
8-3/4" (222mm) overall length
Locking pivot joint allows user to pick up
objects around corners
Nickel plated steel body with cushion grip
handle
Pocket clip for convenient storage
UPC NO. PULL
42224 8 392 2lb.pull
MAGNETIC PICKUP WITH PIVOT JOINT
394
An excellent tool for retrieving steel parts
from hard-to-reach places
High-power neodymium magnet lifts up
to five pounds and will never lose its
magnetism
Steel body measures 13" (330mm) and can
be extended to 27" (685mm)
Locking pivot joint allows user to pick up
objects around corners
Body is chrome plated, with a vinyl cushion
grip handle
UPC NO. PULL
42228 6 394 5lb.pull
EXTRA-LONG, MAGNETIC PICKUP WITH PIVOT JOINT
386
POCKET MAGNETIC PICKUP
Powerful permanent magnet in a knurled
aluminum holder with handy pocket clip
High-powered neodymium magnet is six
times more powerful than standard magnet
Ideal for retrieving small steel and iron
parts from hard-to-reach areas
Measures 5-1/2" (140mm) overall
UPC NO. MAGNET PULL
42219 4 386 NEO 2 lb. pull
SPECIALTY
T- 9 9
ItsYourJob...General Tools Make It Easier”
Magnetic Retrieving Tools
SPECIALTY TOOLS
BENDABLE MAGNETIC PICK-UP
An excellent tool for retrieving steel parts
from hard-to-reach places
High-power neodymium magnet
Knurled aluminum body with bendable
15" (381mm) wire
Overall length is 20" (508mm)
Lifts up to 2 pounds
UPC NO. PULL
42229 3 395 2 lb. pull
395
383NX
TELESCOPING MAGNETIC PICKUP
A powerful permanent magnetic pickup tool
Ideal for retrieving steel and iron parts from
hard-to-reach work areas
Magnet is fitted in a 5-1/2" long nickel plated
steel handle that can extend up to 23-1/2"
Holder is fitted with a pocket-clip
UPC NO. PULL
42208 8 383NX 2 lb. pull
3601
Magnetize and demagnetize screwdrivers,
tweezers, tool bits and other steel objects
Magnetize by sliding the tool through the (+)
opening
Demagnetize by sliding the tool through the
(-) opening
Demagnetize tools for use in electronics
Step design permits greater conrol of
magnetism
UPC NO. DIMENSIONS
36010 6 3601 2"x2"x1-1/8"
(58 x 58 x 29mm)
360
MAGNETIZER/DEMAGNETIZER
Specially designed for magnetizing and
demagnetizing screwdrivers, nut drivers,
wrenches, taps and small tools
Converts any tool blade into a magnetic
retriever for screws, nuts and metallic
particles
UPC NO. DIMENSIONS
42021 3 360 1" x 1" x 1-3/4"
(25 x 25 x 44mm)
PRECISION MAGNETIZER/DEMAGNETIZER
TELESCOPING MINI-LIGHT WITH MAGNETIC PICK-UP
Mini Light with 2 lb. Neodymium Magnetic
pick-up are both fastened to a stainless
steel telscoping wand molded into a rugged
high-impact ABS plastic handle
Telescopes from 7-3/4" 28-3/4"
(197mm 720mm)
4 Alkaline, “LR41”, batteries with a battery
life of 48 continuous hours
LED bulb has a life of 100,000 hours of
continuous use
Has a 2 lb. smooth surface pull capacity
Neodymium donut magnet
Precision engineered 750 Series
Versa-Griphandle for maximum
performance
UPC NO. PKG.
75966 5 759581
Carded
75967 2 759582
Carded
759582
TELESCOPING MINI-LITE WITH MAGNETIC PICK-UP
A powerful permanent magnetic pick-up
tool
Ideal for retrieving steel and iron parts from
hard-to-reach and see work areas
Magnet is fitted in a 5-1/2" (140mm) long
ergonomically designed handle
4 Alkaline, “LR41”, batteries with a battery
life of 48 continuous hours
Light Bulb has a life of 100,000 hours of
continuous use
Mini-Light is fastened to a
chrome plated brass wand
with a double ball joint
Ball and socket feature for
simple, positive adjustments
UPC NO. PKG.
05820 1 582 Carded
582
SPECIALTY
T-100
The Magnetic Sweeper is an ideal tool for retrieving
iron, steel and all ferrous materials. Especially
effective around new construction sites, both
indoors and outdoors. Also effective in machine
shops for cleaning up around power equipment
such as drill presses, milling machines and lathes.
The Magnetic Tool Rack holds and organizes tools in
garages, work shops and service stations.
Magnetic Retrieving Tools
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
UTILITY SWEEPER
An ideal tool for retrieving iron, steel and
all ferrous materials
Powerful, permanent magnets for a
no-stoop pick-up
39" (991mm) aluminum shaft
Plastic handle grip for greater control
and comfort
Some assembly required
UPC NO. WIDTH
22189 6 354 Sweeper 24" (610mm)
354
PICKUP STICKSWEEPER
An ideal tool for retrieving iron, steel
and all ferrous materials
Powerful, permanent magnet for a
no-stoop pick-up
Vinyl-coated magnet for long-life and
durability
37" (940mm) steel shaft for greater strength
and durability
Plastic handle grip for greater control
and comfort
UPC NO.
31434 5 397 Pickup Stick
397
MAGNETIC TOOL RACK
Holds and organizes tools in garages,
workshops and service stations
Powerful permanent magnet
Includes: 1 - 20" Magnetic Tool Rack,
2 mounting brackets with screws
Modular mounting brackets can be used
to create additional lengths
UPC NO. WIDTH
25001 8 250 20" (508mm)
250
368
MAGNETIC STRIPS
Our flexible magnetic strip with adhesive
backing adheres to most smooth clean
surfaces
Holds small-metal objects
1/16" thick and easily cuts to desired length
with scissors or knife
UPC NO. SIZE
42027 5 366 1/2" x 30"
42033 6 368 1" x 30"
42036 7 369 1" x 10'
42038 1 369-100 1"x100'
376
Shallow depth permits use in confined
spaces
Nos. 376A and 376B have 3/16" diameter
clearance holes for fastening with rods or
bolts
No. 376C has a 9/32" diameter clearance
hole
UPC NO. DIA. DEPTH PULL
42111 1 376A 1-3/8" 3/16" 12 lbs.
42114 2 376B 2" 1/4" 20 lbs.
42117 3 376C 2-5/8" 3/8" 35 lbs.
SHALLOW POT CERAMIC MAGNETS
SPECIALTY
T-101
ItsYourJob...General Tools Make It Easier”
Aluminum, nickle and cobalt alloy make General’s
Alnico line of magnets strong and permanent. The
strong magnetic pull of the Alnico Magnets make it
perfect for lifting, holding, sorting, clamping or
retrieving steel or iron parts. Alnico Magnets will
retain their magnetic force indefinitely. Removable
keepers insure long life and optimum performance.
Alnico Magnets
SPECIALTY TOOLS
372
BUTTON TYPE ALNICO MAGNETS
Button shaped magnet has almost unlimited
applications
Retrieves screws and steel parts
Center hole on top of magnet for easy
fastening
CORED
UPC NO. DIA. HT. PULL HOLE
42073 2 372A 1/2" 3/8" 1-1/2 lbs. 1/8"
42076 3 372B 3/4" 1/2" 4 lbs. 1/8"
42079 4 372C 1" 5/8" 6-1/2 lbs. 3/16"
42082 4 372D 1-1/4" 3/4" 14 lbs. 3/16"
42085 5 372E 1-1/2" 7/8" 18-1/2 lbs. 1/4"
374
370-1
POT TYPE ALNICO MAGNETS
Unique combination of strong magnet with
insulating ring gives this magnet the superior
holding power of larger magnets
1/4" diameter x 20 threads-per-inch hole for
attaching to fixtures and machines
UPC NO. DIA. PULL WT. HT.
42093 0 374A 11/16" 6 lbs. 6 oz. 5/8"
42096 1 374B 13/16" 10 lbs. 6 oz. 3/4"
42102 9 374C 1-1/16" 18 lbs. 12 oz. 1"
42105 0 374D 1-3/8" 35 lbs. 24 oz. 1-3/16"
370-2
POWER ALNICO MAGNETS
Strong magnetic pull for lifting, holding, sorting, clamping or retrieving steel or iron parts
Hole in top of magnet for attaching conveyors, racks, and welding jigs
OPENING OZ. WEIGHT
APPROX. POLE BETWEEN EACH
SIZE PULL WIDTH HT. DEPTH WIDTH POLES, CORED WITH
UPC NO. OZ. LBS. IN. IN. IN. IN. IN. HOLE KEEPER
42041 1
370-1
.8 8 1-1/8" 1" 5/16" 5/16" 1/4" 1
42044 2
370-2
2 13 1-1/8" 3/4" 3/4" 1/4" 9/16" 3/16" 3
42050 3
370-4
4 22 1-1/2" 1" 1" 5/16" 3/4" 3/16" 5
42053 4
370-6
6 30 1-3/4" 1-1/8" 1-1/8" 5/16" 7/8" 3/16" 8
42056 5
370-8
8 32 2-3/16" 1-13/16" 15/16" 1/2" 1-3/16" 3/16" 10
42061 9
370-12
12 42 2-5/8" 2-1/4" 15/16" 5/8" 1-3/8" 3/16" 15
42064 0
370-16
16 50 3" 2-1/2" 15/16" 3/4" 1-1/2" 3/16" 20
42067 1
370-24
24 70 2-1/2" 1-13/16" 1-7/8" 5/8" 1-3/8" 1/4" 28
377
WELDING MAGNET
Designed to enable fast and accurate
holding of ferrous metal for welding and
assembly jobs
Holds both sheet and tube at angles of
180°, 90°, 45° and 30°
Two body holes enable the clamp to be
built into jigs or hung when not used
Small compact design makes the “quick
clamp” useful for all light ferrous fabrication
work
Ideal to include in the tool kit for numerous
holding applications
UPC NO. THICKNESS PULL LBS. WT. OZ.
42122 7
377
.468 50.0 9.0
375
Ideal for holding steel plates in position for
welding, brazing, and soldering, eliminating
the need for clamps or temporary fastening
General’s welding links are constructed of
two heavy-duty Alnico magnetic blocks
linked together with a strong steel bar and
wing nuts for easy angle adjustment
SIZE OF PULL
UPC NO. BLOCK PER BLOCK
42226 2
375 2.4"x1"x1" 25lbs.
MAGNETIC ADJUSTABLE WELDING LINK
SAW/DRIVER
A
4-IN-1 CUTTING
& DRIVING SYSTEM
The Keyless Quick Change Locking Chuck
accepts both Quick Change Power Bits and
Standard Reciprocating Saw Blades.
QP05
SPECIALTY
T-103
ItsYourJob...General Tools Make It Easier”
“THE QUAD Saw/Driver set offers a 4-IN-1
Cutting and Driving System; a jab saw, key hole
saw, power driver, and speed driver.
The 2 position quick change locking handle offers
both power and speed. A convenient holster
holds all 14 pieces.
The “QUAD” Saw/Driver
SPECIALTY TOOLS
HOLSTER
“THE QUAD
14 PIECE SAW/DRIVER SET
A 4-IN-1 cutting and driving system
Jab Saw with straight handle and
special Sheetrock reciprocal blade
Keyhole Saw in the pistol grip
handle position
Power Driver in the pistol grip
position
Speed Driver, screw or nut driver
with straight handle
The keyless Quick-Change locking
chuck accepts both Quick-Change
bits and industry standard
reciprocating saw blades
14 PIECE SET INCLUDES:
3 saw blades; drywall,
Metal/PVC, wood,
7 insert bits
1 hex to square adaptor
1 quick change handle
1 holster with belt-clip
1 bit extender
Swivel locking chuck holds all
reciprocating blades and speed
shank power bits
Comfortable handle easily locks
in the straight or pistol grip position
UPC NO.
86014 9 86014
86014
SAW/DRIVER
Bit Extender
SPECIALTY
T-104
Cutting & Carving Tools
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
PRECISION HOBBY KNIVES
Precision knives for fine angle cuts
HANDLE KNIFE PKG.
UPC NO. CONSTRUCTION WEIGHT QTY.
43974 1 1901 Aluminum Light duty 5
43976 5 1902 Aluminum Medium duty 5
43978 9 1903 Aluminum Heavy-duty 5
1901
1902
1903
HOBBY KNIFE BLADES
For precision cutting from medium to
heavy cuts
•Packedinaquantityof5.
UPC NO. REPLACEMENT FOR
43988 8 1920 1901
43992 5 1922 1902, 1903, 1905
43994 9 1923 1902, 1903, 1905
43996 3 1924 1902, 1903, 1905
1920 1922 1923 1924
1915 PRECISION KNIFE SET
Consists of one each of Nos. 1901, 1902
and 1903 knives and 10 assorted blades
in a fitted wooden case
UPC NO.
43984 0 1915
22-PIECE PRECISION KNIFE AND BLADE SET
Designed specifically for the precision
cutting of a variety of materials
Heavy-duty locking screw chuck holds blades
securely in place
Set includes: 2 Multi-Blade Handles
No. 1 and No. 2 20 Knife Blades -
•5-No.11•5-No.16•3-No.17B
3 - No. 22 2 - No. 26 2 - No. 28 blades
Packaged in a pocket sized zippered case
•AllULTRATECHknife handles accept
industry standard blades
Precision engineered 700 and 750 Series
Versa-Griphandle for maximum
performance
UPC NO. PKG.
75622 0 75622 Zippered Case/Carded
#26 #16 #28 #17 #11 #22
75622
Blades shown actual size
General Tools Professional Quality Knife Sets are
designed specifically for the precision cutting of a
variety of materials, from fine, intricate cutting to
heavy-duty carving and scraping.
General Tools offers a complete line of precision
hobby knives for industrial users, crafts people and
hobbyists. A broad selection of surgically sharp
replacements and accessory blades are available.
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
SPECIALTY
T-105
ItsYourJob...General Tools Make It Easier”
General’s Utility Knives are used for cutting and
scoring fiber-board, matboard, roofing, linoleum,
carpeting, plasterboard and veneers.
The Five-Piece Carving Tool Set offers a fixed blade
that is forged tool steel, ground and hardened for
lasting sharpness. Handles are made of hardwood
for greater control and comfort grip.
Cutting & Carving Tools
SPECIALTY TOOLS
For cutting and scoring fiberboard, wall-
board, matboard, cardboard, corkingboard,
roofing, linoleum, carpet, plasterboard,
veneers and other materials
Opens instantly to any one of three cutting
positions
Blade retracts into handle for safety
Comes with three replaceable heavy-duty
alloy steel blades, No. 852, in storage handle
UPC NO.
43046 5 855
Heavy-duty
SLIDE LOCKING UTILITY KNIFE
HEAVY-DUTY
UTILITY KNIFE BLADES
UPC NO. THICKNESS PKG. QTY
43027 4 852-5 0.025 5
43030 4 852-100 0.025 100
852
855
FIVE-PIECE CARVING TOOL SET
Five different blade shapes
Blades are made of hand forged tool steel, ground and
hardened for lasting sharpness
Half round palm style handles are made of hardwood
Comes in vinyl case
Overall length 5"
UPC NO. BLADE SHAPE
43900 0 1293 Bent large gouge, 5/16"
Straight small gouge, 5/32"
Bent V parting tool, 5/32"
Straight skew chisel, 5/16"
Bent square chisel, 5/16"
1293
Bent
V Parting Tool,
5/32"
Straight
Skew Chisel,
5/16"
Bent
Square
Chisel,
5/16"
Bent
Large
Gouge,
5/16"
Straight
Small Gouge,
5/32"
GLASS CUTTER
Cuts plate glass from 1/8" to 1/4" thick
Steel wheel with honed angle of 120° for
cutting single and double strength glass
Ball end handle for snapping of scored glass
Tooth design to remove rough edges
UPC NO. LENGTH
43061 8 8501 5" (125mm)
8501
JUNIOR HACKSAW
Handy cutting tool for hobbyists, do-it-your-
selfers and professionals
Ergonomically designed with a comfortable
high-impact plastic handle
6" (150 mm) replaceable heat treated blade
for cutting metal
Sturdy tubular frame
Reversible blade for push or pull cutting
Set of 6 replacement blades:
3 wood and 3 metal
UPC NO.
43067 0 864
43070 0 864B Set of 6 Blades
864
SPECIALTY
T-106
General Tools offers Solid Brass Grommet Kits,
which are available in three sizes, Snap Fastener
Kits and Screw Fastener Kits. These various kits are
used to repair canvas, tarpaulins, tents, awnings,
sailcloth, lawn furniture and pool covers. Each set
has handy step-by-step instructions.
Grommets, Snaps & Screw Fasteners
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
71260
UTILITY GROMMET KITS
These various size kits are used to repair
canvas, tarpaulins, tents, awnings, sailcloth,
lawn furniture and pool covers
Contains brass plated steel grommets with
hole cutter and hardwood backer block,
hardened mandrel and anvil
Setting tool has knurled body for greater
comfort and safety
Setting tool and anvil are coded with lines
for each individual size grommet
Three sizes available
INDIVIDUAL SIZE
UPC NO. DESCRIPTION
22341 8 71260 1/4" Grommet Kit
with 48 grommets
22342 5 71262 3/8" Grommet Kit
with 24 grommets
22343 2 71264 1/2" Grommet Kit
with 12 grommets
GROMMET REFILLS
UPC NO. SPECIFICATIONS
41103 7 1261-0 1/4" Grommet Refill
with 24 Grommets
41104 4 1261-2 3/8" Grommet Refill
with 24 Grommets
41105 1 1261-4 1/2" Grommet Refill
with 24 Grommets
1261
1265
SNAP FASTENER KIT
Contains 2-piece setting tool and 6 fastener
sets
Solid brass fasteners with nickel plating will
not rust
Knurled body for greater comfort and safety
UPC NO. SPECIFICATIONS
41106 8 1265 Snap Fastener Kit
with 6 Fasteners
41107 5 1266 6 Snap Fastener Refills
1267
SCREW SNAP FASTENER KIT
Contains 2-piece setting tool and 6 fastener
sets
Solid brass fasteners with nickel plating will
not rust
Knurled body for greater comfort and safety
Screw snap fastener base has 3/8" long
screw for attaching to wood, plastic and
fiberglass
UPC NO. SPECIFICATIONS
41108 2 1267 Screw Snap Fastener Kit
with 6 Fasteners
41109 9 1268 6 Screw Snap Fastener Refills
SPECIALTY
T-107
ItsYourJob...General Tools Make It Easier”
Punches & Punch Sets
SPECIALTY TOOLS
Arch Punches, Hollow Steel Punches and Gasket
Punches are all used for punching round holes in
gasket material, leather, rubber, canvas, cardboard,
plastic, sheet metal and other soft materials.
These fine quality tools are forged and heat-treated
for long life and the cutting edges will stay sharper
longer.
1271ST
ARCH PUNCHES
For punching holes in leather, rubber, gasket
material and soft metals
Inside taper for clearance
Heat treated forged steel
The 1271ST consists of seven punches, one
each of 1/4", 3/8", 1/2", 5/8", 3/4", 7/8" and
1", comes in plastic roll pouch
UPC NO. SIZE
43849 2 1271ST Set of 7
Available in individual sizes listed
UPC NO. SIZE
43793 8 1271A 1/4"
43799 0
1271C
3/8"
43804 1
1271E
1/2"
43810 2
1271G
5/8"
43813 3 1271H 11/16"
43816 4
1271-I
3/4"
43819 5
1271J
13/16"
43821 8
1271K
7/8"
43822 5
1271L
15/16"
43825 6
1271M
1"
43827 0
1271N
1-1/8"
43829 4
1271-O
1-1/4"
43831 7
1271P
1-3/8"
43833 1
1271Q
1-1/2"
1280ST
HOLLOW STEEL PUNCHES
For punching holes in leather, rubber, can-
vas, cardboard, plastic and other materials
Made of forged steel with side clearance
hole for easy removal of punched material
The 1280ST which consists of six punches,
3/16", 1/4", 5/16", 3/8", 7/16", and 1/2",
comes in a plastic roll pouch
UPC NO. SIZE
43896 6 1280ST Setof6
Available in individual sizes listed
UPC NO. SIZE
43856 0 1280A 3/32"
43859 1 1280B 1/8"
43862 1 1280C 5/32"
43865 2 1280D 3/16"
43868 3 1280E 7/32"
43870 6 1280F 1/4"
43872 0 1280G 9/32"
43874 4 1280H 5/16"
43876 8 1280-I 11/32"
43878 2 1280J 3/8"
43880 5 1280K 13/32"
43882 9 1280L 7/16"
43884 3 1280M 1/2"
43886 7 1280N 9/16"
43888 1 1280-O 5/8"
43890 4 1280P 3/4"
For punching holes in gasket material,
leather, rubber, canvas, cardboard, plastic
and sheet metal
Nine interchangeable hardened and tem-
pered alloy steel punches: 1/4", 5/16", 3/8",
7/16", 1/2", 5/8", 3/4", 7/8" and 1"
Heavy-duty, spring-loaded, self-centering
steel mandrel
Both mandrel and punches are knurled and
have a threaded coupling to prevent slip-
page and hold punch securely to mandrel
Fitted plastic storage case
UPC NO. DESCRIPTION
43751 8 S1274 10 pc. set
S1274
PROFESSIONAL 10-PIECE GASKET PUNCH SET
GASKET PUNCH SET
Compact and economical set for punching
holes in soft materials and leather
Set of 10 punches, one each of 1/4", 5/16",
3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8" and
1", with driving mandrel comes in a molded
plastic storage case
UPC NO.
43759 4 S1270
S1270
SPECIALTY
T-108
Pliers
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
HIGH QUALITY CHROME
VANADIUM STEEL
WILL NOT RUST
LARGE STEEL
LEAF SPRING
FOR QUICK
OPENING JAWS
SERRATED JAWS
FOR BETTER GRIP
The perfect jewelers pliers for making loops
and jump rings
OAL jaw length - 1-1/16" (27mm)
OAL length - 4-3/4" (120mm)
UPC NO. PKG.
41061 0 902
Bulk (Open Stock)
ROUND NOSE PLIERS
For cutting, shaping, bending and gripping
light materials and wire
Side cutter will handle most cutting
requirements
OAL jaw length - 1-3/16" (30mm)
OAL length - 5" (127mm)
UPC NO. PKG.
41059 7 901
Bulk (Open Stock)
CHAIN NOSE, SERRATED JAW PLIERS
8-PIECE TECHNICIAN’S MINI-PLIER SET
A compact set designed for Electricians, Technicians,
Hobbyists and Do-it-Yourselfers
High quality Chrome Vanadium Steel will not rust
Serrated jaws for better grip
Large Steel Leaf Spring for quick opening jaws
Fully-polished head
Double dipped cushion grip handles for safe gripping
Durable Vinyl Case for the easy and safe storage of these
precision pliers
Consists of eight of the most popular sizes of mini-pliers
No. 901 - Chain Nose Serrated Jaw Pliers. OAL - 5"
No. 902 - Round Nose Pliers. OAL - 4-3/4"
No. 903 - Smooth Jaw Pliers. OAL - 4-7/8
No. 904 - Curved Chain Nose Pliers. OAL - 4-3/4"
No. 905 - Long Needle Nose Pliers. OAL - 6".
No. 906 - Diagonal Head/Oval Cutter. OAL - 4-1/4"
No. 907 - End Cutter. OAL - 4-1/8"
No. 908 - “Mini” Linemans Pliers. OAL - 4-1/2"
•No.938-8piece“Mini”PlierSet
No. 934 - 4 piece “Mini” Plier Set; Nos. 905, 906, 907, 908
UPC NO. PKG.
00938 8 938
8 Piece - Vinyl Case/Boxed
00934 0 934
4 Piece - Vinyl Case/Boxed
901
902
DOUBLE DIPPED
CUSHION GRIP
HANDLES FOR
SAFE GRIPPING
ERGONOMICALLY
SHAPED HANDLE
FOR MAXIMUM
USER COMFORT
AND CONTROL
SPECIALTY
T-109
ItsYourJob...General Tools Make It Easier”
Pliers
SPECIALTY TOOLS
904
For bending wire, jewelry making and
retrieving objects from tight areas
OAL jaw length - 1-1/16" (27mm)
OAL length - 4-7/8" (124mm)
UPC NO. PKG.
41064 1 903
Bulk (Open Stock)
FLAT NOSE, SMOOTH JAW PLIERS
For cutting soft wire and other light materi-
als. For an accurate cut in tight areas
OAL jaw length - 1/2" (13mm)
OAL length - 4-1/4" (108mm)
UPC NO. PKG.
41069 2 906
Bulk (Open Stock)
OVAL HEAD DIAGONAL CUTTER
Used for odd angle access, retrieving and
positioning with non-serrated jaws
OAL jaw length - 1-1/8" (29mm)
OAL length - 4-3/4" (120mm)
UPC NO. PKG.
41066 5 904
Bulk (Open Stock)
CURVED CHAIN NOSE PLIERS
Used for extreme far reaching access,
positioning and retreiving
OAL jaw length - 2-1/8" (54mm)
OAL length - 6" (152mm)
UPC NO. PKG.
41067 2 905
Bulk (Open Stock)
LONG NEEDLE NOSE PLIERS
For accurate flush surface cutting of light
materials and wire
OAL jaw length - 9/32" (7mm)
OAL length - 4-1/8" (105mm)
UPC NO. PKG.
00907 4 907
Bulk (Open Stock)
END CUTTER
For securing a positive grip on flat objects
to form a bend
Serrated jaws for better grip
Side cutter will handle most cutting
requirements
OAL jaw length - 7/8" (22mm)
OAL length - 4-1/2" (114mm)
UPC NO. PKG.
00908 1 908
Bulk (Open Stock)
“MINI” LINEMAN’S PLIERS
903
905
906
907
908
SPECIALTY
T-110
General’s Revolving Punch Plier is a convenient spring
tension, self-opening tool for punching round holes
in leather, plastic, rubber, canvas cardboard and
similar materials.
The Dial Wire Stripper can be set to a desired size
for individual or repetitive stripping without
damaging the wire.
Punches, Scrapers & Files
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
S476
FILE END VIEWS
Designed to meet the exacting requirements
of tool and die makers, instrument makers,
jewelers, watchmakers and other crafts-
people
Precision made of finest quality tool steel
Packed in snap button plastic case
#2 single style cut
UPC NO. LENGTH FILES IN SET
42318 4 S476 5-1/2” 6
SIX-PIECE SWISS PATTERN NEEDLE FILE SET
REVOLVING PUNCH PLIER
A convenient spring tension, self-opening
tool for punching round holes in leather,
plastic, rubber, canvas, cardboard and
similar materials
Made of plated steel with six tapered
and hollow, hardened steel punches
Punch sizes: 5/64", 3/32", 7/64", 1/8",
5/32", 3/16" (2.0, 2.5, 3.0, 3.5, 4.0, 4.5mm)
UPC NO. LENGTH
41039 9 72
8-1/4" (210mm)
72
69
DIAL WIRE STRIPPER
Dial the wire size desired for individual or
repetitive stripping without damaging wire
Spring opening for fast and easy cutting or
stripping
Dial lock closes stripper to protect hardened
cutting edges
Vinyl cushion handles
UPC NO. WIRE GAGE CAPACITY
41036 8 69 12, 14, 16, 18, 20, 22, 24, 26
COTTER PIN PULLER
General’s compound bend design allows
user to extract cotter pins with either a pull
or twist motion. Ideal for use in confined
work areas
Plated shaft and point are 4" (101mm)
in length and made of long lasting heat
treated high carbon steel
A safe and easy way to remove cotter pins
Heavy-duty plastic handle with a comfort-
able grip
UPC NO. SPECIFICATIONS
41030 6 64 Length: 7-1/2" (190mm)
64
TRIANGULAR SCRAPER
Useful tool for scraping, trimming, and
deburring metals, tubing and other materials
Hardened and tempered triple edge blade is
secured in wood handle with steel ferrule
Hollow ground cutting edges stay sharp
longer and resharpen easily
UPC NO.
42321 4 478
478
WARDING
(FLAT)
SQUARE ROUND HALF
ROUND
THREE
SQUARE
EQUALLING
(MILL)
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
The compound bend design allows extrac-
tion with either a pull or twist motion.
SPECIALTY
T-111
ItsYourJob...General Tools Make It Easier”
General Tool’s Swiss Pattern Needle File Sets are
designed to meet the exacting requirements of
tool and die makers, instrument makers, jewelers,
watchmakers, hobbyists and other craftspeople.
Precision made of the finest quality tool steel.
The 5-1/2" long knurled aluminum handle provides
maximum filing control and comfort and will
fit all styles of General’s Swiss Pattern Files.
Multi-File & Needle File Sets
SPECIALTY TOOLS
S475
SWISS PATTERN NEEDLE FILE SET
A complete set of General Purpose files to
meet the needs of craftsman, hobbyists
and jewelers
Files are made of high quality tool steel
Set includes 12 different files including the
three most commonly used file shapes: flat,
round and triangular. All measure 5-1/2"
(138mm) long
Packed in snap button plastic case
#2 single style cut
UPC NO. LENGTH FILES IN SET
42315 3 S475 5-1/2" 12
FILE END VIEWS
FILE END VIEWS
FILE END VIEWS S477
Set includes three of the most commonly
used file shapes: flat, round and triangular.
All are high-quality tool steel and measure
5-1/2" (138mm) long
A 5-1/2" (138mm) long knurled aluminum
handle provides maximum filing control and
comfort
8-1/2" (213mm) overall size
#2 single style cut
General Purpose file set for hobbyists and
craftsmen
UPC NO.
42319 1 S477 3 files and handle
ROUND
FOUR-PIECE SWISS PATTERN NEEDLE FILE SET WITH HANDLE
ADJUSTABLE FILE/TOOL HANDLE
For holding files, reamers, hacksaw blades
and other tang handled tools
Exclusive steel parallel clamping jaws grip
the entire length of the inserted tang to
prevent slipping
Large, quick adjusting knurled knob ensures
positive locking
Rustproof handle with steel parts
Conforms to government specifications
NN-H-0085
UPC NO.
43666 5 890
4-1/8" (105mm)
1-1/16"
(27mm)
890
THREE SQUARE
WARDING
(FLAT)
SQUARE CROSSING ROUND HALF
ROUND
THREE
SQUARE
EQUALLING
(MILL)
JOINT ROUND
EDGE
KNIFE BARRETTE SLITTINGOVAL
WARDING (FLAT)
707476
A basic set of General Purpose Files to
meet the needs of craftspeople, tool and
die makers, hobbyists and jewelers
Set includes 6 different files. All measure
5-1/2" (138mm) long with 1/8" (3mm)
diameter shanks
Files are constructed of high quality
Chromium Alloy Steel
All files are 2-1/2" (63mm) long, #2 Single
Cut Swiss Pattern
Knurled handle file can be used without
handle assembly
Precision locking screw chuck holds files
securely in place
Precision engineered 700 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
70746 8 707476 Holster/Carded
ROUND HALF
ROUND
SQUARE WARDING
(FLAT)
THREE SQUARE EQUALLING
(MILL)
6-PIECE SWISS PATTERN NEEDLE FILE SET
SPECIALTY
T-112
File & Probe Sets
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
WARDING (FLAT) SQUARE CROSSING ROUND HALF ROUND THREE SQUARE
EQUALLING (MILL) JOINT ROUND EDGE
KNIFE BARRETTE SLITTING
OVAL
707475
12-PIECE SWISS PATTERN NEEDLE FILE SET
General Tool’s Swiss Pattern Needle File Sets are designed
to meet the exacting requirements of tool and die
makers, instrument makers, jewelers, watchmakers,
hobbyists and other craftspeople. Precision made of the
finest quality tool steel. Knurled handle file can be used
without handle assembly. Precision locking screw chuck
holds files securely in place. General’s Probe, Positioning
and Spring Hooks are useful in a wide variety of
mechanical and electrical functions. Ideal for probing,
cleaning, picking or marking small work surfaces.
4-PIECE INTERCHANGEABLE
STAINLESS STEEL PROBE SET
For probing, cleaning, picking, or marking
small work surfaces
Set Includes: 4 heat treated stainless steel
point configurations: Straight 180º Hook
35º Bend 90º Bend
Precision locking screw chuck holds blades
securely in place
Each blade is 5" long (127mm);
OAL 8-1/2" (216mm) with handle
Precision engineered 700 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
70786 4 707862 Holster/Carded
707862
60004
For probing, cleaning, picking or marking
small work surfaces
Set includes the most popular mini-tool
configurations: Straight 180º Hook
35º Bend 90º Bend
Each blade is 2-5/8" (67mm) with an overall
length of 6" (152mm)
Blades constructed of heat treated 8650
Alloy steel (nickel-chromium-molybdenum)
Precision engineered 600 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
60004 2 60004 Carded
Set contains:
NO. TYPE SIZE BLADE LENGTH
610001B Probe Straight Probe 2-5/8"(67mm)
610002B Probe 35° Bent Probe 2-5/8"(67mm)
610003B Probe 90° Bent Probe 2-5/8"(67mm)
610004B Probe 180° Hook Probe 2-5/8"(67mm)
4-PIECE PRECISION BLADE PROBE SET - FIXED BLADE
A complete set of General Purpose Files
to meet the needs of craftspeople, tool
and die makers, hobbyists and jewelers
Set includes 12 different files. All measure
5-1/2" (138mm) long with 1/8" (3mm)
diameter shanks
Files are constructed of high quality
Chromium Alloy Steel
All files are 2-1/2" (63mm) long, #2 Single
Cut Swiss Pattern
Knurled handle file can be used without
handle assembly
Precision locking screw chuck holds files
securely in place
Precision engineered 700 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
70745 1 707475
Zippered Case/
Carded
FILE END VIEWS
SPECIALTY
T-113
ItsYourJob...General Tools Make It Easier”
Probe Sets
SPECIALTY TOOLS
862
3-PIECE PROBE AND HOOK SET
For probing, cleaning, picking or marking
small work surfaces
Three heat treated, high carbon steel point
configurations: 45 degree, double bend and
hook bend
Extra long aluminum knurled body
Hex head prevents rolling
UPC NO. OVERALL LENGTH
24500 7 862
6-1/2" (165mm)
868
4-PIECE MICRO PROBE SET
For probing, cleaning, picking or marking
small work surfaces
Four heat treated, high carbon steel point
configurations: 45 degree, two double bends
and hook bend
Extra long aluminum knurled body
Packaged in a reuseable plastic tube
UPC NO. OVERALL LENGTH
24501 4 868
5-1/2" (138mm)
12-PIECE STAINLESS STEEL PROBE, POSITIONING & SPRING HOOK SET
Useful in a wide variety of mechanical and
electrical functions
For separating and positioning wires,
inserting and adjusting wires and springs
in hard-to-reach areas
For probing, cleaning, picking or marking
small work surfaces
Heavy-duty locking screw chuck holds
blades securely in place
Each blade is 5" long (127mm);
OAL 7-1/2" - 8-1/2" (184mm - 216mm)
with handle
Set Contains: Twist Chuck Multi-Purpose
Handle 5" Extension blade Straight
•35ºBend•90ºBend•180ºLoop,
Double Bend 180º Hook Probes Offset
Pull Hook 135° Pull Hook Pull/Push
Hook Adjusting Pull/Push Hook
Placement Guide/Lifter
Packaged in a fitted zippered case for
convenient and safe storage
Precision engineered 700 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
70962 2 707865 Zippered Case/Carded
707865
707863
5-PIECE STAINLESS STEEL POSITIONING AND SPRING HOOK SET
Useful in a wide variety of mechanical and
electrical functions
For separating and positioning wires,
inserting and adjusting wires and springs
in hard-to-reach areas
Heavy-duty locking screw chuck holds
blades securely in place
Each blade is approximately 5" long
(127mm); OAL 7-1/2" - 8-1/2" (184mm -
216mm) with handle
Set Contains: Twist Chuck Multi-Purpose
Handle Offset Pull Hook 135° Pull Hook
Pull/Push Hook Adjusting Pull/Push
Hook Placement Guide/Lifter
Holster included for convenient storage
Precision engineered 700 Series Versa-Grip
handle for maximum performance
UPC NO. PKG.
75970 2 707863 Holster/Boxed
589
PRECISION OILER
For the exact placement of oil or any other
lubricant
For technicians, contractors, hobbyists and
DIY’ers
Smooth actuator allows for greater control
and placement of lubricant
Generous reservoir
Protective screw-on cover prevents leakage
All aluminum construction
Convenient pocket clip
For use with lubricants only
UPC NO. OVERALL LENGTH
58900 2 589
5-5/8" (143mm)
MAGNETIC TORPEDO LEVEL
Quality crafted torpedo level with large
reversible reading vials meets the accuracy
requirements of professionals
Heat resistant, unbreakable endplates and
internal aluminum frame
Readings possible from top, bottom or side
positions
Magnetic working edge for use with metal
surfaces
V-grooved working edge for use on pipes
UPC NO. LENGTH
42698 7 839 9"
839
SPECIALTY
T-114
General’s 3-IN-1 LED and LCD Stud, Voltage and
Metal Detectors are ideal for locating studs, pipes,
wire carrying voltage and hidden metal. Micro-
processor control circuits make it easy to distinguish
between battens/studs, metal pipes/tube or objects
carrying voltage. An ideal for the DIY home owner,
handyman, hobbyist as well a the professional.
Voltage Detectors
SPECIALTY TOOLS
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
MSV250
MSV350D
DIGITAL 3-IN-1 LCD STUD / VOLTAGE / METAL DETECTOR
Ideal for Locating Studs, Pipes, Wires Carrying Voltage and Hidden Metal
FEATURES:
Selectable Metal, Voltage and Stud
detections or Auto Mode to perform
3 functions simultaneously
Micro-Processor Control Circuits provide
precise and accurate detections
Results shown on LCD with buzzer
Multi-Scan-Level to pinpoint exact position
Battery status indicated on LCD
Auto Power OFF
Low power consumption
Ideal for the D. I.Y. Homeowner, Handyman,
Hobbyist and Professional
SPECIFICATIONS:
Dimensions:
6.1"(L) x 2.6"
(W) x 1.3"(D)
(155 x 65 x 32mm)
Weight: 6.5oz (185g)
Power Source:
1 “9V” battery
(not included)
Includes: User’s Manual
3-IN-1 LED STUD / VOLTAGE / METAL DETECTOR
Ideal for Locating Studs, Pipes, Wires Carrying Voltage and Hidden Metal
FEATURES:
Stud, Voltage and Metal Detection combined
in one unit
4-level low power consuming LED’s indicate
precise stud detection
Metal/Voltage Selector Switch provides
accuracy in detecting hidden metal or wiring
Stud Detector can be operated with Metal or
Voltage Detector simultaneously
Easy to distinguish between battens/studs,
metal pipes/tubes or objects carrying
voltage
No probe necessary
SPECIFICATIONS:
Dimensions:
6.1"(L) x 2.6"
(W) x 1.3"(D)
(155 x 65 x 32mm)
Weight: 6.3oz (178g)
Power Source:
1 “9V” battery
(not included)
Includes: User’s Manual
UPC NO.
01276 5 MSV250
UPC NO.
01275 8 MSV350D
Moisture-resistant reinforced bottom
Steel frame mouth and rivet reinforced for
rugged use and durability
Adjustable padded non-slip shoulder strap
Dimensions: 12"H x 16"W x 8"D
(305 x 406 x 203mm)
UPC NO.
01319 9 81001
81001
ZIP-TOP TOOL AND METER BAG, 16" WIDE
TOOL BAGS
Shatters automotive side windows for emergency escapes
High-visibility red flashing emergency light
Magnets hold the tool to the vehicle
Bright white LED flashlight helps you see at night
Safety blade cuts seat belts
Includes 3 “AAA batteries in a convenient battery compartment
LED Flashlight
Seat Belt Cutter
Flashing Hazard Light
Easy Battery Access
Glass Breaker
T-115
ItsYourJob...General Tools Make It Easier”
Auto Emergency Tool
SPECIALTY TOOLS
UPC NO. PKG.
79020 0 7902 Carded